Here is my channel wish list if you would like to show some support in purchasing some tools or spare parts, it is gratefully appreciated www.amazon.co.uk/hz/wishlist/ls/13BO7QKGAZZV2/ref=nav_wishlist_lists_2?_encoding=UTF8&type=wishlist
Super video again Mick. Thank you. You do make it look so easy. When I come to do it I think I will take photos of the springs etc before I start. You can tell I've Been there before. " where did that go"
Hi great video thanks. Had the same mower. Would not run no matter what we did. Turns out the woodruff key had sheared on the flywheel putting the timing out. We live and learn.😎👍
@@themowerman Great video. Carby was full of rust. Can you tell me what carby model number/manufacturer I need to replace it (or provide a link) - cant find it on google. Many thanks
Micks Mowers Merchandise UK Store below micksmowersthemowerman.myspreadshop.co.uk/men?q=D1 Micks Mowers Merchandise USA Store below micks-mowers-usa.myspreadshop.com/all
I've got to have a look at my dad's mower in a bit my brother couldn't get it started it's got the Briggs and Stratton quantum I only just replaced the key last winter I'm just thinking my brother might have hit something. But I will check for spark fist then look at the key and if that's ok look at the carb
Hi Mick I just picked up a Webb DVO130 WER410SP It is running slow I have cleaned the carburettor new spark plug I cannot find any adjustment on the carburettor to speed the mower and I cannot find a replacement carburettor and it is smoking a little have you got any ideas on this it would be a great help hope you and the family are keeping well Regards Kenny.
I believe I'd cut that wire off that goes to the throttle linkage, it's not necessary and if you sell it, the buyer might fall into the same trap the guy that had it before did.
@@themowerman cheers Mick. I did think of that but i thought it would be a specific belt but ill now take your advice and go find one. Thanks again. Have a top day
I just picked up an old Hayter Harrier 56 and it only had three tbsp of thick crude oil in it. The oil seal had melted as a result. I think this is called mower abuse.
@@themowerman I am a retired industrial maintenance man. I have seen some pretty bad foot and ankle injuries in my time. I just don't want to see you get hurt. You seem like a nice fella.
Hi Mick, on your video, I've noticed that there is whitish sort of barrel on the fuel pipe. I've just come across one of these, that someone had put on, how does this work, as there doesn't seem to be a hole for the fuel to go through. Any advice would be greatly appreciated..
Here is my channel wish list if you would like to show some support in purchasing some tools or spare parts, it is gratefully appreciated www.amazon.co.uk/hz/wishlist/ls/13BO7QKGAZZV2/ref=nav_wishlist_lists_2?_encoding=UTF8&type=wishlist
The mind boggles with people there loss your gain spot on Mick 👍👍👍👍
Ohhh yes mate .and long may it last..
Super video again Mick. Thank you. You do make it look so easy. When I come to do it I think I will take photos of the springs etc before I start. You can tell I've Been there before. " where did that go"
Lol.. I'm the same .. always take photos
Hi great video thanks. Had the same mower. Would not run no matter what we did. Turns out the woodruff key had sheared on the flywheel putting the timing out. We live and learn.😎👍
Yeah that will do it ..
Nice one Mick, love your videos, Pip is looking like a lovely dog too, all the best
She is a lovely dog.. just crazy 🤣
Good video Mick and not to forget Pip, you definitely know your lawnmowers, and have a good little business going at home.
Another great learning video there Mick regarding the additional micro switch.
Thanks mate
Perfect, that is exactly the machine I am about to work on.
Good luck
@@themowerman Great video. Carby was full of rust. Can you tell me what carby model number/manufacturer I need to replace it (or provide a link) - cant find it on google. Many thanks
@@rootbrag what's the mower model ?
@@themowerman Its a WER41SP
@@rootbrag does your carb have a fuel tap on the side of it ?
Good stuff Mick keep up the good work.
Thanks mate
Micks Mowers Merchandise UK Store below
micksmowersthemowerman.myspreadshop.co.uk/men?q=D1
Micks Mowers Merchandise USA Store below
micks-mowers-usa.myspreadshop.com/all
Good job with the new fence Mick and a nice easy fix on the carb 👍
Nice 1 Mick. Great Buy.
Nice fix mate .
TOOLS I USE -
Oil Extraction pump amzn.to/2UBApDI
Fan Blade Bulb amzn.to/39BLI4a
Blade removel tool amzn.to/3nxBVQj
Micro Drill Bits amzn.to/36Jpv0R
Carb Cleaning Files amzn.to/3lH8ESx
Hex Shank Extension Drill Bits Bar Set 1/4" 3/8" 1/2" amzn.to/3oFKHx9
Dewalt DCF887M1- Impact Driver, amzn.to/3oEVcjZ
Lawnmower Rotary Blade Balancer amzn.to/3e6UOWN
Rode WIGO Wireless GO Wireless Microphone amzn.to/2JlRlIN
Neewer 176 LED Light amzn.to/2HaubnJ
Universal Style, Mower Deck clamp for blades amzn.to/31PKygE
Briggs & Stratton Diaphragm and Gasket set amzn.to/3kF8Y3H
GT SONIC 3L Ultrasonic Cleaner amzn.to/2TDdVy9
VEVOR 3L Ultrasonic Cleaner amzn.to/2Gb3PBJ
Stainless Steel Strainer for carb jets in a cleaner amzn.to/3e6CxJ2
Thank you for the video.
congrats on the 20k mick love the video's.
Loved watching this video cracking little mower , and have to add that your little dog 🐕 is adorable big fella.
A lot of people “forget” to pull the dead man in, especially after winter lay up.
Top job Mick. You should hang a grass box on the line to mark your territory lol. Nice dog.
Lol ok.. Mrs p would love that
pip Rules! love the Tshirt
You may want to replace the fuel filter also as the in-line one being used is installed backwards.
very informative mate, well done
Thanks mate
hi mick i have a wer410sp and the valves need adjusting but not sure what to adjust them to. Any idea?
What engine mate..
@@themowerman it's a dvo130 engine mate
@@RileyTech2 email me a photo of the engine mate micksmowers01@gmail.com
Nice save
Thanks mate
Been educated again 😀 cheers Mick 👍🍻
Sweet little mower there Mick and easy fix 👍🏻 great advice there for those microswitches, many of these chinesium engines have them 😁
I've got to have a look at my dad's mower in a bit my brother couldn't get it started it's got the Briggs and Stratton quantum I only just replaced the key last winter I'm just thinking my brother might have hit something. But I will check for spark fist then look at the key and if that's ok look at the carb
Lucky find Mick. 👍
Thanks cupcake
🤣🤣
Hi Mick I just picked up a Webb DVO130 WER410SP It is running slow I have cleaned the carburettor new spark plug I cannot find any adjustment on the carburettor to speed the mower and I cannot find a replacement carburettor and it is smoking a little have you got any ideas on this it would be a great help hope you and the family are keeping well Regards Kenny.
Hi mate .. email me some photos
Hi Mick can you please send me your email address cheers mate Kenny
I believe I'd cut that wire off that goes to the throttle linkage, it's not necessary and if you sell it, the buyer might fall into the same trap the guy that had it before did.
Wow that looks a nice mower what sort of money would it be
Morning Mick…this drapper 440 mower looks like it need a belt. Drapper says discontinued ..any pattern parts suppliers that would have belt please
Just take the belt off mate and go to a car parts shop and get a fan belt a little smaller.. that should do it
@@themowerman cheers Mick. I did think of that but i thought it would be a specific belt but ill now take your advice and go find one. Thanks again. Have a top day
I've just got to new fly wheel pulley brigg stratan and a nother one they do not work on a old Suffolk mower which is the right pulley for it Mick 😅
What to remove the flywheel?
Good job micks I like whacking channel I am looking for a engine for my poly deck it is a smiling engin
Hey did I miss it, what did you do with your air compressor?
Yeah.. I did a video or a short on it
@@themowerman ok I'll find it.
Blows my mind to this day you buy mowers off ebay.
I know right.
Where else would you buy them out of interest?
@@jamiesmith1829
Facebook
Craigslist
Offer up
Nextdoor
I just picked up an old Hayter Harrier 56 and it only had three tbsp of thick crude oil in it. The oil seal had melted as a result.
I think this is called mower abuse.
Oh a Chonda engine, not the best engines, but when they do run they run good.
I agree
One tool I have never seen you use is a Tachometer to check the revs. Do you trust your ear. 👂
Yes
WD 40's number 1 customer hey WD 40 if you're watching just saying 👋 This machine is new good Lord !!!
You make me nervous wearing open toed shoes with no socks around those tools and mowers. Accident/injury waiting to happen.
Ohhh I'm careful.. don't worry...
@@themowerman I am a retired industrial maintenance man. I have seen some pretty bad foot and ankle injuries in my time. I just don't want to see you get hurt. You seem like a nice fella.
@@EWB66 yeah I hear you.. I have worked on farms and now work on the railroad.. seen a lot myself.. I am careful.. ..
If they were all that easy, huh
Just a FYI.... Your voice is cracky, and I can barely hear the engine.
It's a broken mic mate.. all sorted now
you need to adjust your microphone every time you talk I hear cracking in the sound.
It's the old system.. I now have a new one..
Hi Mick, on your video, I've noticed that there is whitish sort of barrel on the fuel pipe. I've just come across one of these, that someone had put on, how does this work, as there doesn't seem to be a hole for the fuel to go through. Any advice would be greatly appreciated..
Hi.. normally it's a one way value type of system or a paper filter.. it just catches the bits of dirt
@@themowerman thanks for your prompt reply Mick. All the best.
@@trickydicky274 no worries mate