TOP TIP. 16:23 pause here, look for the two push clips, these can be removed, then the top central cowl will come off, looks like a big nose. this makes plugging the wires back in a lot easier, then clip the top cowl back on, and push in the little clips at the end.
Bart is a legend! I just ordered the Quadrix Sequential LED Pod Turn Signals (front and rear) for my 23’ Grom yesterday. Also got the running light circuit kit for the rear turn signal, but still wondering if I can tap into the small license plate light I have from my yoshi fender eliminator kit? Perhaps there is a better wire to tap into in order to give my rear turn signals running light functionality like the front does? Again, thank you TST team as you guys always go above and beyond! It doesn’t go unnoticed!
@@ItsAlexR we just shot an episode today focusing on installing Quadrix-D universally on any bike. The set will come with a harness and posi-tap connectors for a trouble free connection. Those will be available soon. We are just waiting for the harnesses to come out of production.
@@TSTindustries This is fantastic! Thank you so much; a video will be helpful as I believe the quadrix d lamp turn signals are going to gain popularity with all the functionality (not to mention they look bad ass)
Ahh yes Bart! The RHS connector is ridiculously rotated 90 degrees from the visual side. I rotated mine 90 degrees so to make it easier to remove from going forward similar to the LHS of the bike! How crazy is this?🤦♂️
I ripped apart so much of the front end trying to chase down a more friendly installation flow with no good result. In the end I decided to just go with the less invasive but more cumbersome method shown here. I still feel like i missed something that i could have done to make it easier. I have to do one more installation in that area. We are about to launch our Running Mate product for this bike. It turns front DRL into a signal and running light, while giving the ability to add a single circuit signal lamp to each side that also functions as running and signal light. So i will be performing this on video once again.
![Quando Rondo - Life Goes On [Official Music Video]](http://i.ytimg.com/vi/eIf3fhMXAow/mqdefault.jpg)
Bart is a champion of TST Industries ⭐️👌
Thanks Steven. I love when people appreciate my work.
B.
@@TSTindustries my mother calls me Steven when I’m trouble 😂😂😉😎
TOP TIP. 16:23 pause here, look for the two push clips, these can be removed, then the top central cowl will come off, looks like a big nose. this makes plugging the wires back in a lot easier, then clip the top cowl back on, and push in the little clips at the end.
Than kyou for sharing your method. Hopefully someone looking at the comment feed can try your approach and report on its effectiveness.
I have the giant conventional light bulbs, have to do this asap
Bart is a legend! I just ordered the Quadrix Sequential LED Pod Turn Signals (front and rear) for my 23’ Grom yesterday. Also got the running light circuit kit for the rear turn signal, but still wondering if I can tap into the small license plate light I have from my yoshi fender eliminator kit? Perhaps there is a better wire to tap into in order to give my rear turn signals running light functionality like the front does? Again, thank you TST team as you guys always go above and beyond! It doesn’t go unnoticed!
Would you like to have red running light, brake and signal function from a Quadrix-D lamp setup? Let's make your setup more legendary...
@@TSTindustries yes I would definitely like to have it!!
@@TSTindustries I was a bit intimidated about getting the quadrix d, I don’t know too much about wiring/electrical!
@@ItsAlexR we just shot an episode today focusing on installing Quadrix-D universally on any bike. The set will come with a harness and posi-tap connectors for a trouble free connection. Those will be available soon. We are just waiting for the harnesses to come out of production.
@@TSTindustries This is fantastic! Thank you so much; a video will be helpful as I believe the quadrix d lamp turn signals are going to gain popularity with all the functionality (not to mention they look bad ass)
very helpful!! thank you😊
Very nice 👍
Ahh yes Bart! The RHS connector is ridiculously rotated 90 degrees from the visual side. I rotated mine 90 degrees so to make it easier to remove from going forward similar to the LHS of the bike! How crazy is this?🤦♂️
I ripped apart so much of the front end trying to chase down a more friendly installation flow with no good result. In the end I decided to just go with the less invasive but more cumbersome method shown here. I still feel like i missed something that i could have done to make it easier. I have to do one more installation in that area. We are about to launch our Running Mate product for this bike. It turns front DRL into a signal and running light, while giving the ability to add a single circuit signal lamp to each side that also functions as running and signal light. So i will be performing this on video once again.
@@TSTindustries those side repeater & side light connectors are so small, you need tiny hands & long thin fingers to get in there!
see by comment@@TSTindustries
dude no Malaysia option in your website registration
That is correct. At this time, we do not ship to Malaysia. You may be able to shop with one of our dealers.
tstindustries.com/dealers.html