Luminous मे Driver volt का Fault, step by step एक ही video में

Поделиться
HTML-код
  • Опубликовано: 28 ноя 2024
  • Online Spare parts site..
    www.tufonlines...
    More videos...
    24×7 Microtek मे Voltage जब झटके दे या Fluktuation करे,तो कया करे
    • 24×7 Microtek मे Volta...
    Amaron kit में Driver card कैसे Check करें
    • Amaron kit में Driver ...
    121 kit अगर Dead हो तो क्या करें , Switch not work why?
    • 121 kit अगर Dead हो तो...
    Microtek में Fuse ठीक है फिर भी Fuse blown का fault आ रहा है
    • Microtek में Fuse ठीक ...
    Low voltage का Fault Su kam shark Model में कैसे ठीक करें
    • Low voltage का Fault S...
    Star max kit repair kre easily for beginners
    • Star max kit repair kr...
    कोनसा मॉस्फेट कोनसे इन्वेर्टर में युज कर सकते है और कोनसा मॉस्फेट कितने वट्स का है | what is mosfet
    • कोनसा मॉस्फेट कोनसे इन...
    माईक्ररोटेक इन्वर्टर मे लो बेंटरी का फाल्ट असांनी से दुर करे ;Low battery fault in microtek invertor
    • माईक्ररोटेक इन्वर्टर म...
    जली हुईं Luminous की कीट को आसानी से ठीक करें और कमाए 700₹ से 800₹ ; Luminous burn kit repair
    • जली हुईं Luminous की क...
    SMD IC या Micro Chip को असानी से कैसे नीकाले
    • SMD IC या Micro Chip क...
    Microtek kit मे MOSFETs कैसे बदलें और कोनसी बातों का धिआन रखें
    • Microtek kit मे MOSFET...
    कोई भी Transformer का data कैसे निकालें ( Part 1 )
    • कोई भी Transformer का ...
    कोई भी Transformer का data कैसे निकालें ( Part 2 )
    • कोई भी Transformer का ...
    Luminous invertor का output fault 2 मिनट ठीक करें और कमाए 300₹ से 400₹
    • Luminous invertor का o...
    माईक्ररोटेक इन्वर्टर मे over चार्ज का फाल्ट (fault) कैसे ठीक करें
    • Video
    Su kam SMD इन्वर्टर मे charging का fault कैसे ठीक करें
    • Su kam SMD इन्वर्टर मे...
    Su kam Eco watt‌‌ | sine wave मे चार्ज और मेन काम नही कर रही | कैसे ठीक करें
    • Luminous Eco watt‌‌ | ...
    Su kam | sine wave मे MOSFETs कैसे बदलें और कोनसी बातों का धिआन रखें
    • Su kam | sine wave मे ...
    Microtek E2 और EB model मे A To Z चार्जिंग Fault step by step एक ही video में
    • Microtek E2 और EB mode...
    Microtek मे Driver volt का Fault, step by step एक ही video में
    • Microtek मे Driver vol...
    Luminous मे Driver volt का Fault, step by step एक ही video में
    • Luminous मे Driver vol...
    SMD Luminous का Driver volt fault step by step एक ही video मे
    • SMD Luminous का Driver...
    For Watch more videos.. My channel www.youtube.co....

Комментарии • 141

  • @madanlalsuthar1935
    @madanlalsuthar1935 4 года назад +3

    mujhe kaafi maskat ke baad ye vidio mila he sir
    mere paas yahi kit repair ke liye aai hui he jisme w51 drive tranjistoer short he or pcb me ek side ke chanal par drive nahi aa rahi he or mujhe ye tranjistor market me mil bhi nahi raha tha ab dekhta hu ki bc 639 or bc 640 agar mil jaayega to mera kaam ban jaayega
    thank you sir

  • @mdishraelansari288
    @mdishraelansari288 5 лет назад +1

    Aur you tuber video banake daal dete RUclips me kon comments karta kon kya puchhta koi problem nahi
    Par Aap mahaan ho sir aap sabka khyal rakhte sabke comments ka replay karte hain thank you so much Sir
    Bass yahi Duwa hai meri
    Allaah paak Aapko hamesha khoosh rakhhen

  • @hayabaya4488
    @hayabaya4488 3 года назад

    Sir mene you tube par bahut video dekhe h lekin ap se achi knowledge kise ko nhi h mene kai you tuber ke comments dekhe h ap ke video par mera problem ye h ke eco watt 650 full smd kit drive problem h transform ke dono tar jaha connect hote h baha drin par ek side 6 volt or dusari side 9volt aa rhi drive nhi aa rhi h transistor change kar deye or micro bhi change kar di

  • @Tiger-yp8cw
    @Tiger-yp8cw 9 месяцев назад

    Aapki aawaz achhi hai. Samjh mai jaldi aata hai. 😊

  • @mdishraelansari288
    @mdishraelansari288 5 лет назад +1

    Mere liye ye video bahut hi helpful hai thank you Sir thank you so much

  • @electrovijender
    @electrovijender 4 года назад +1

    Good morning Sir g

  • @mdishraelansari288
    @mdishraelansari288 5 лет назад +2

    Bahut mohabbat karte hain log Aapse sir bass aise hi apna pyar mohabbat banaye rakhhe aur nayi nayi video banate rahiye
    Thank you Sir

  • @arshivahuja1003
    @arshivahuja1003 4 года назад +1

    Good job

  • @rahulpatelgujratahmedabad3497
    @rahulpatelgujratahmedabad3497 4 года назад

    Good tiching 👍👍👍👍👍👍👍👍👍

  • @mohitjangra6591
    @mohitjangra6591 7 месяцев назад +1

    639 or 640 ki jgh kon saa lgega

  • @Inderjeetsingh-kf3cw
    @Inderjeetsingh-kf3cw 4 года назад +1

    V. V. Good

  • @dayakhanday5765
    @dayakhanday5765 5 лет назад +1

    very nice video hay sir please mere Liye aoyr jaankaari video Bathana Sir please

  • @rajbirkambojelectronics6222
    @rajbirkambojelectronics6222 6 лет назад +1

    Very nice video sir ji

  • @rajusarma8535
    @rajusarma8535 5 лет назад +1

    Nice video sir. Thank you. Luminous Electra 665 KA drive voltAge ke upor step by step bataye Pls. (24*7 ) kaise massure kare drive voltAge Pls bataye.

  • @muhammadayaz6536
    @muhammadayaz6536 6 лет назад +1

    Very good sir

  • @sachinpanchal8190
    @sachinpanchal8190 6 лет назад +1

    Very good

  • @sachinpanchal8190
    @sachinpanchal8190 6 лет назад +1

    Good video sir

  • @santoshkumarprajapati2335
    @santoshkumarprajapati2335 6 лет назад

    Nice videos sir ji.

  • @MrDhillonBhadaur
    @MrDhillonBhadaur 4 месяца назад

    Transistor 639 ,640 ke jaga aur koi transaction laga sakte hai

  • @meetsingh251
    @meetsingh251 5 лет назад +1

    Good sir g.

  • @mdzubair629
    @mdzubair629 5 лет назад

    Sir aap video bahut achhi hoti hai our isko samajh ne ke liye koi diagram ya koi book mil sakta hai kya sir

    • @technicalupsfaults5074
      @technicalupsfaults5074  5 лет назад

      Nhi sir book nhi hai koi ye to bass aapne mind se solve kr ke aap sbb ko btaa rha hu

  • @wasimahamad9981
    @wasimahamad9981 3 года назад

    Sir isme z44 mosfet lga skte hain kya

  • @balwindersingh-dk5hp
    @balwindersingh-dk5hp 2 года назад

    Heat sink pr to ac volt ana Chahia 12 v ????

  • @madanlalsuthar1935
    @madanlalsuthar1935 4 года назад

    Sir mene bc639 or 640 transistor daal diye he ab
    Ek chanal par 7 volt or dusare side ke chanel ke get par 2volt drive aa rahi he please tel me

  • @mandhirsingh4528
    @mandhirsingh4528 4 года назад

    Sir shoti plate resistance pf wali da ki kmm h

  • @ansarahmad8483
    @ansarahmad8483 2 года назад

    Sir nye mosfet lagane par bhi drive dono taraf 0 aati please ak video banaye problem hal ho dhanywad

  • @rahulpatelgujratahmedabad3497
    @rahulpatelgujratahmedabad3497 4 года назад

    Ap ak bar scr or trik se kesi charching hoti he vo bataye hme ..thanks 👌👌👌👌👌👌👌

  • @BhupinderSingh-zz7mx
    @BhupinderSingh-zz7mx 2 года назад

    Utl 2525 par ek video banai

  • @mohitjangra6591
    @mohitjangra6591 7 месяцев назад

    Ya w01A ya w51A ki jgh kon saa lgega

  • @manojpande1820
    @manojpande1820 2 года назад +1

    639 640 naye dalne ke bad bhi driv volt nahi ara

  • @kcpanda2337
    @kcpanda2337 4 года назад

    Sir lb long bord me mosfet ke sath laga hua zenor diod ki valu kya hai

  • @shallumotan3369
    @shallumotan3369 8 месяцев назад

    Isme ac pulse kitne voltage ani chahea? Or agr sahi na ho kese thik kre pls bta do koi

  • @santoshkumarprajapati2335
    @santoshkumarprajapati2335 6 лет назад

    Is tarah ki videos sine wave me bhi banai sir ji.

  • @VinodSharma-vr7xu
    @VinodSharma-vr7xu 2 года назад

    Sir I have same luminous long board after replacing all mosfets now output voltage is coming around 328 volts so please suggest how to reduse it on specific voltage at 230.

    • @VinodSharma-vr7xu
      @VinodSharma-vr7xu 2 года назад

      If you don't mind may I have your contact details.

  • @juwelrana4774
    @juwelrana4774 6 лет назад +1

    Vai mere pass a wali ups he problem keya he output voltage 280/290 de Raha he, kam keyse karu, isme to volt kam Karne Ka veriabble vi Nahi he plz help me?

  • @omduttsharma4469
    @omduttsharma4469 3 года назад

    Sir ji same bord me one side drain per volt aa rahe h dusari side gate per sahi h please help

  • @mohdhusain5041
    @mohdhusain5041 6 лет назад +1

    Nice video sir aap luminus ka smd bale board pr mosfet sectaion ke step by step video upload kijiye sir 639 transistor kijagha bc 547 work kr jayega sir

    • @technicalupsfaults5074
      @technicalupsfaults5074  6 лет назад

      Jrur smd vale pe bhi bnauga, 547 100mili amp hai or 639 1 amp ka koi bhi 1 amp ka transistor use krlo but uski base emiter or collector pin paihle pta kr le ki konsi hai

    • @mohdhusain5041
      @mohdhusain5041 6 лет назад

      @@technicalupsfaults5074 hame sir pata kese chalega ki ye transistor kitne amp ka he otherby koi sa bhi transistor kesae pata kare ki ye kitne amp ka he

    • @technicalupsfaults5074
      @technicalupsfaults5074  6 лет назад

      Simple trika to ye hai ki aap jiss transistor ke bare me pta krna chahte ho usko google me search kr ya components naam ka software hai playstore me download kr le

    • @foujiboy-gamer
      @foujiboy-gamer 5 лет назад

      Sir ap components app ka link bejh sakte h

    • @foujiboy-gamer
      @foujiboy-gamer 5 лет назад

      Sir mene 639, 640 ki jageh 547 tazistar laga ke dekha h par vo kam nahi karta h ap mujhe bata sakte us ki jageh or koi bhi lag sakta h jo markit me milta ho

  • @ashishdogra0481
    @ashishdogra0481 3 года назад

    hello
    i have a long same board.its mosfet z44 burnt.after replacing one side 5 mosfets and diodes when i connect with battery the mosfet again burnt. every time it happened.on check the board there is no shorting found all done.i dont know where is the fault.please help me ...

    • @technicalupsfaults5074
      @technicalupsfaults5074  3 года назад

      Change driver both transistor (639, 640)

    • @ashishdogra0481
      @ashishdogra0481 3 года назад +1

      @@technicalupsfaults5074 thanks for reply...
      ok let me check after replacing ..
      three time its burnt..
      hope this time it will not burnt ..

    • @mohammadsk52
      @mohammadsk52 Год назад

      640/639 iske alawa or koi transistor sir

  • @mithunhaque
    @mithunhaque 4 года назад

    Hello ji! Mere same board ki IPS hai or iski Transformer me vibration araha hai and output fluctuate kar raha hai. Aap please advice kar sakte hay ke maine keya kar sakti hu? Or kaun ic yea parts check kar saktihu please?

  • @MohdJaved-dq6jm
    @MohdJaved-dq6jm 2 года назад

    Ek gate pr ok volt h pr dusri side 12 volt aa rahe h sir ple reply

  • @Soma_vlog0
    @Soma_vlog0 3 года назад

    Capacitor 4700mf pas Doo rasistans ha oska value basto gas. Plz.

  • @mohdsahilansari3725
    @mohdsahilansari3725 4 года назад

    ꜱʀ 1 ᴠɪᴅᴇᴏ ᴏʀ ʙɴᴀᴇyᴇ

  • @Nitin_Electronics
    @Nitin_Electronics 3 года назад

    Sir ji main mode ch output aaa ri charging v ok hai but ups mode ch output ni de reha

  • @nikkuelectronics
    @nikkuelectronics 4 года назад

    Sir main p55 mospit lage c but 1 channel ke dusri side continute nhi aa rhi c .. but bran ho ge .. reply sir

    • @technicalupsfaults5074
      @technicalupsfaults5074  4 года назад +1

      Gate volt aani jruri hai sir paihle transistor or ziner chack kro voltane ke baad MOSFET dalo

    • @nikkuelectronics
      @nikkuelectronics 4 года назад +1

      @@technicalupsfaults5074 ok sir thank you

  • @RashidKhan-vc6lk
    @RashidKhan-vc6lk 5 лет назад

    Sir mere pass isme ki same kit pr 24 volt ki hai. On nhi ho rhi.
    1 ohm ki resistor bhi change ki.
    5050 transistor pr bhi voltage nhi aa rhe.
    Pr isme ek ic 34063 lagi hai.
    Any solution please.

  • @meghakumari4163
    @meghakumari4163 5 месяцев назад

    Ek traf 4.12v AA Raha hai ek traf 4.85 kya braber kisa hoga sir ji

  • @vinodjangid1397
    @vinodjangid1397 3 года назад

    Luminous long card me ups on kar NE pr back site tarek kyo falt ho ta h sir ji

  • @actechnicalrepair2353
    @actechnicalrepair2353 6 лет назад +1

    Sis is kita me overlod ki problem step by step isi formule se smjaye please

  • @RahulVishwakarma-xu2fy
    @RahulVishwakarma-xu2fy 2 года назад

    Luminous ka inverter MOSFET Lagane per battery se supply dete he board main supply date MOSFET Jal ja raha hai problem Kya Hogi jaldi se bataiye

  • @JitendraSahu-se9bh
    @JitendraSahu-se9bh 3 года назад

    Inverter ok .main line not charged

  • @HarmanderSingh-r7v
    @HarmanderSingh-r7v 3 месяца назад

    Sar mere pass ek board hai long card luminous ka uska overload nahin hat Raha

  • @PrinceSharma-vi9wp
    @PrinceSharma-vi9wp 3 года назад

    Sir ji drive voltage ok hai but out put nahi nikal raha

  • @SurinderKumar-do2kf
    @SurinderKumar-do2kf 4 года назад

    Sir Ek side me 640,639 lage h dusri side me konse tarajister lege h

  • @hitendersingh2816
    @hitendersingh2816 3 года назад

    Sir drain lagane par one sir drive lose please help

  • @princekumar-lb6fk
    @princekumar-lb6fk Год назад

    Sir. Q12 transistor lgate hi drive. 0 ho jate h

  • @sa48918
    @sa48918 13 дней назад

    drive volt to ban gaya 10 ohms wali do rajistan hit hone lagti haijo ek hi jagah laga huwa hai 5408 se canect hai

  • @jagdeepsingh3421
    @jagdeepsingh3421 3 года назад

    Luminous long card mosfet driveing one side 5.64 volt and two side 3.00 volt Mospet and 639,640 change please help me

  • @dayakhanday5765
    @dayakhanday5765 5 лет назад

    Sir mere paas Luminous Eco 650v me 8748Musfot Fault hay tho ko sa Musfot usj karu please bataye mere 8748 nahi tho sir may Kon sa

    • @technicalupsfaults5074
      @technicalupsfaults5074  5 лет назад

      ruclips.net/video/eNU1MwxscrM/видео.html
      Isme sbb btaeaa hai brother video dekh lo.aap meri aachi lge to subscribe kr lena

  • @altafhusainpihani3761
    @altafhusainpihani3761 5 лет назад

    Bhai 7390 ic ki jagah kon si ic lagay aur k58 mosfat ki jagah kon sa mosfat lagay

  • @xxxns414
    @xxxns414 3 года назад

    मेरे heat sink पर वोल्टेज आ रही है जब भी मैंने सारे मॉसफेट हटा दिए हैं अगर मैं बड़े डायोड हटाता हूं तो वोल्टेज नहीं आतीं है, इसका मतलब कि डायोड खराब है लेकिन जब मैं डायोड को बाहर टेस्ट करता हूं तो वह ठीक है मैं लुमिनस एलबी लोंग बोर्ड की बात कर रहा हूं , क्या करु

  • @travel-life-fun
    @travel-life-fun 4 года назад

    If output main 60 volt aa rahe ho in battery mode

  • @salmanbrh123
    @salmanbrh123 6 лет назад

    Sir 639,640 ki jagah koi dusra tarasiter use kai ja sakta hai

    • @technicalupsfaults5074
      @technicalupsfaults5074  6 лет назад +2

      Koi bhi 1 amp ka transistor lgaa skte hai but lgane se paihle uski pinout jrur chack kr le jaise ki BD139 & BD140 BUT iski pin yani base collector emiter ka frk hai

    • @salmanbrh123
      @salmanbrh123 6 лет назад

      @@technicalupsfaults5074 ok thanks sir

    • @technicalupsfaults5074
      @technicalupsfaults5074  6 лет назад

      Welcome

  • @saravananv2260
    @saravananv2260 Год назад

    Bc 639 and bc 640 right and site transistor but left site transistor value bro

  • @shribhagwandahiya9902
    @shribhagwandahiya9902 4 года назад

    Drive volt satp by satp long card

  • @raajsharmasharma4110
    @raajsharmasharma4110 5 лет назад

    Luminous ka long kit hai jab uskoo Main pay on Karo too charging mode on hota hai amp be athay hai but charging chordeta hai please felt batyo

    • @technicalupsfaults5074
      @technicalupsfaults5074  5 лет назад +1

      Utha ke chor deta hai? 3021, or scr change kr ke dekho ,jack dekho sparking na ho..

  • @deepakkaushik3062
    @deepakkaushik3062 Год назад

    bc 640 locations on both sides?

  • @mohd9927
    @mohd9927 3 года назад

    Barabar nhi aa rhe h drive volt solution btao sir 24 volt luminous

  • @shallumotan3369
    @shallumotan3369 9 месяцев назад

    Drive voltage sahi ni ho pa rha pls sb change krke dekhlya... Circuit diagram chahea koi help kr skta h

  • @AjayGupta-kc5gh
    @AjayGupta-kc5gh 4 года назад

    Bta16 के बगल में तीनों रजिस्टेंस के बीच वाला रजिस्टेंस बार-बार जल जा रहा है

  • @JitendraKumar-iq1uf
    @JitendraKumar-iq1uf 5 лет назад

    Sir micro ic ke pin no. 1pe 5v hai, pin no. 6(switch on) pe 5v hai, par 12,14 pe o volt aa raha hai luminous long pcb hai

    • @technicalupsfaults5074
      @technicalupsfaults5074  5 лет назад +1

      Switch vale jack pe 12 volt chack kro aa rhe hsi ys nhi agr nhi to 1 ohm ki resistance dead hogi change kr lena

  • @bansidharkhatri6325
    @bansidharkhatri6325 5 лет назад

    लूमीनैस,लौगकीट मै आऊटपूट300vकाै,कम,कैसै, करै,बताओ सर

    • @technicalupsfaults5074
      @technicalupsfaults5074  5 лет назад

      Aapko driver volt kmm krni pregi jo mosfets ko jati hai use kmm krnaa muskil hai iske upr bhi jld video bnuga oor dusa trika hai transformer ki taping change kr ke

  • @mr.kk.sameer1797
    @mr.kk.sameer1797 4 года назад

    Lumans inverter elektra 1500 eb mosfet fald get nhi aa rhe

  • @sanjaynarwa5464
    @sanjaynarwa5464 2 года назад

    Mains pe nahi chalta

  • @anilyogi5077
    @anilyogi5077 3 года назад

    1 trf to dravi aa rhi he or 1 trf nhi aa rhi kya kre guru ji

  • @mdishraelansari288
    @mdishraelansari288 5 лет назад

    Karo Aap log disliked karoge karo sabka apna apna kaam hai karo

  • @arifkhan593
    @arifkhan593 5 лет назад

    Sir is card me lo battery dikha rha hai on karte hi battery volt 13.5 hai

  • @salmanbrh123
    @salmanbrh123 5 лет назад

    Sir ,is kit me over lord ki problem hai program ic Sahi hai phir bhi over lord Der rha hai plz Kuch bataiye sir

    • @technicalupsfaults5074
      @technicalupsfaults5074  5 лет назад

      Ek to overload ka priset lgaa hoga usko change kr do week ho geyaa hoga aagr fir bhi theek naa ho to lm324 ic change kr do ho jayeaaga

    • @salmanbrh123
      @salmanbrh123 5 лет назад

      @@technicalupsfaults5074 sir preset ,LM324 ic, change kar Diya hai phir bhi ni hua
      100 watt se jayad lord dalne per hi over lord ho rha hai

    • @salmanbrh123
      @salmanbrh123 5 лет назад

      Sir mere pass 2 kit hai dono me sem fualt hai

    • @technicalupsfaults5074
      @technicalupsfaults5074  5 лет назад

      Fir driver volt or mosfets chack kroo

    • @salmanbrh123
      @salmanbrh123 5 лет назад

      @@technicalupsfaults5074 sir mosfet ke gate per voltage sahi aa rha hai aur mosfet bhi abi change ni hua hai

  • @harendrakumar903
    @harendrakumar903 29 дней назад

    Ek sid to aarahe hai or ek sid nahi araha gat ke voltage

  • @VedPrakash.481
    @VedPrakash.481 4 года назад

    अन्दर 640 और वाहर 639 लगाने पर इनवर्टर ऑन तो हो रहा है पर चारजिग आने पर मोसपेट फट जाते हैं किस तरह से 640,639 लगाने हैं ।

    • @technicalupsfaults5074
      @technicalupsfaults5074  4 года назад

      Agr w vale transostor lge hai to unki jga ulta kr ke lgate hai 639, 640 video me btaea hai puri video dekho gate volt chack kro dono aide same ho or scr chack kr lena short na ho

  • @MohdJaved-dq6jm
    @MohdJaved-dq6jm 2 года назад

    547 pr bhi koi volt nhi h jbki trajister ok h

  • @azhruddinkhan8302
    @azhruddinkhan8302 2 года назад

    Q 1 or 17 par 10 point raha hai aur sab theek hai ek side drive nahin a Rahi

  • @VipinKumar-sl2jv
    @VipinKumar-sl2jv 3 года назад

    Right chanal per drive nhi aa rhi

  • @DalbirSingh-tn4xk
    @DalbirSingh-tn4xk 4 месяца назад

    Oneside mospedhet hora

  • @mohd9927
    @mohd9927 3 года назад

    Drive volt 7.15 aa rhi h

    • @mohd9927
      @mohd9927 3 года назад

      Luminous 1400 va lb

  • @mohdsahilansari3725
    @mohdsahilansari3725 4 года назад

    ꜱʀ ᴀᴀᴩ 1 ᴠɪᴅᴇᴏ ᴏʀ ʙᴀɴᴀᴀᴏ ᴀᴀᴩ

  • @Alones_art
    @Alones_art 4 года назад

    Bc639,640 ke jagah kaun sa transistor laga sakte hai

  • @muaazansari1895
    @muaazansari1895 3 года назад

    Apna no. Dedijie

  • @dbrothers3558
    @dbrothers3558 5 лет назад

    Hello sir mujhe inverter ka pic16f72 ka software chahiye no 9693435401

  • @sunilhooda624
    @sunilhooda624 4 года назад +1

    Very very good video.

  • @deepukaushalpradeepkushal9264
    @deepukaushalpradeepkushal9264 3 года назад

    Very good sir