Renault Trafic 2014 reversing camera retrofit, to the original Media Nav OEM head unit!

Поделиться
HTML-код
  • Опубликовано: 12 янв 2025

Комментарии • 156

  • @stevieg_306
    @stevieg_306 5 лет назад +1

    Personally I think the most useful part of the video is the fact that the radio only accepts an NTSC signal, that would have quite a few people stumped on why the signal is not showing on the screen properly. Great video as always and very informative 👍👍👍

    • @LMAutoRepairs
      @LMAutoRepairs  5 лет назад

      Absolutely!
      Thank you so much for watching and for your comment!

    • @jientjai
      @jientjai 4 года назад +1

      I installed a pal one only works with key on but when is started it the camera is going blank

  • @januszderen1253
    @januszderen1253 4 года назад +1

    You are better than main dealers, I bet they would say "it's impossible", great video as always :)

    • @LMAutoRepairs
      @LMAutoRepairs  4 года назад +1

      😊
      Thanks!
      For watching and for your comment!

  • @stevehayes6661
    @stevehayes6661 5 лет назад +1

    The only limitation to upgrade and retrofitting is imagination and money once you have those in plentiful supply anything else can be accomplished.
    Awesome video.

    • @LMAutoRepairs
      @LMAutoRepairs  5 лет назад

      Couldn't not agree more!
      Thank you for watching and for your comment!

  • @herrstoy4766
    @herrstoy4766 3 месяца назад +1

    Thank you so much for your video! It's been a great help for troubleshooting my reverse cam installation.

  • @engeneer_ru5827
    @engeneer_ru5827 5 лет назад +1

    Hi Louis! Great job, neat and reliable!
    Once, repaired the same Media Nav. At Renault, an assembly in Russia understands the PAL video signal.
    I look with interest, Denis!

    • @LMAutoRepairs
      @LMAutoRepairs  5 лет назад

      Thanks...
      For watching and for your comment!
      👍👍👍

    • @engeneer_ru5827
      @engeneer_ru5827 5 лет назад +1

      Louis, what is the software version number of the Clip installed in the laptop?
      Going to buy a Can Clip clone in China. What do you think about it?

    • @LMAutoRepairs
      @LMAutoRepairs  5 лет назад +1

      @@engeneer_ru5827
      I am still using a quite old version... get the latest one...😉

  • @jamesross4099
    @jamesross4099 2 года назад +1

    Bloody brilliant, one thing I am struggling with is removing the glove box? Found two screws but that is it, I need to be able to feed the camera behind the dash. Many thanks

    • @LMAutoRepairs
      @LMAutoRepairs  2 года назад

      To be honest, I don't longer remember how it comes off... sorry...
      But I think there is some on the side, inside and underneath...
      👍👍👍

  • @richards4456
    @richards4456 4 года назад +1

    Used clip to do this on a Captur today. Worked a treat!

    • @LMAutoRepairs
      @LMAutoRepairs  4 года назад +1

      That's great!
      Thank you for watching and for your comment!

  • @jessieganaan3969
    @jessieganaan3969 5 лет назад +1

    You have a fantastic job mate, well done!

    • @LMAutoRepairs
      @LMAutoRepairs  5 лет назад

      Thanks!
      For watching and for your comment!

  • @isalmankhan1
    @isalmankhan1 5 лет назад +1

    Thanks Bro😎, for another awesome video, it is always educational to watch your methods of attacking these repairs with such versatility👍

    • @LMAutoRepairs
      @LMAutoRepairs  5 лет назад +1

      Thanks!
      For watching and for your comment!

  • @tvpcustomsuk2792
    @tvpcustomsuk2792 2 года назад +1

    Much Appreciated, lovely clear video 😀 I will share to our group with all these lovely Vans 😀R

  • @herrstoy4766
    @herrstoy4766 8 месяцев назад +1

    Brilliant! Well done! Thanks for this tutorial!

    • @LMAutoRepairs
      @LMAutoRepairs  8 месяцев назад

      😊
      Thanks!
      👍👍👍

    • @jonesben6
      @jonesben6 7 месяцев назад

      hi what obd did you use please and windows. iv got the red obdlink sx but clip will not find it

  • @oasnap
    @oasnap 5 месяцев назад +1

    Great video. Where did you ground the wire for the camera in the back?

    • @LMAutoRepairs
      @LMAutoRepairs  5 месяцев назад +1

      Thanks!
      I genuinely don't remember now... but any place in the chassis should do the job...
      👍👍👍

  • @liamtuckett8696
    @liamtuckett8696 3 года назад +1

    Hi mate ace video. Can you send me the link to the reno link adapter been looking at some and I'm.not too sure witch is right.. thanks mate keep up the good work 💪🏾

  • @bodgitandleggitgarage
    @bodgitandleggitgarage 5 лет назад +1

    Nice job mate

  • @goggsy0
    @goggsy0 2 года назад +1

    Hi awsome video.. The question im asking is the slot where the radio goes in is it big enough for a double din radio head unit as the original unit is only single din many thanks

    • @LMAutoRepairs
      @LMAutoRepairs  2 года назад

      I did this ages ago... I can't recall now...
      Perhaps some one else will be able to answer that... sorry...
      👍👍👍

  • @zsoltcsaplar8054
    @zsoltcsaplar8054 5 лет назад +2

    Fantastic job, Y have a lot of work hours on this, You're a very persistent guy👌. I always have a question for you, Renault Zoe electric car, : R clip 190 detects a bad engine number then can not make connection. I have Bosch KTS350, it's a read the appropriate engine number communicates withis perfectly connected to. The clip does not allow you to manually select the engine code. The clip only makes a mistake on this car🤔What do you think of this error? During installation I copied the old clip interface file to clio 190.

    • @LMAutoRepairs
      @LMAutoRepairs  5 лет назад

      Did older Clip versions connect ok?
      Thank you for watching and for your comment!

    • @dariusdambrauskas9643
      @dariusdambrauskas9643 5 лет назад +1

      All you should dogo to this website and get software

    • @dariusdambrauskas9643
      @dariusdambrauskas9643 5 лет назад +2

      You should go in to this website mena.co/
      get a software for this radio

    • @LMAutoRepairs
      @LMAutoRepairs  5 лет назад

      @@dariusdambrauskas9643
      The software for what?
      Would not change to radio from NTSC to PAL.... that's for sure....
      Thank you for watching!

    • @dariusdambrauskas9643
      @dariusdambrauskas9643 5 лет назад +1

      @@LMAutoRepairs there is a special software to activate camera on original radio

  • @peterprice8393
    @peterprice8393 Год назад +1

    Hi , I have a question for you my friend , I have a 2016 traffic sport with rear camera that shown in a stupid position in a rear view mirror even thought I have no rear view out of the van . So just wondering if the signal from the existing cam could be diverted to the radio / Media screen …? And I think you might be the best person to ask about this . Please also keep your excellent videos come too.

    • @LMAutoRepairs
      @LMAutoRepairs  Год назад

      Possibly...
      If the video signal is the same...
      👍👍👍

    • @peterprice8393
      @peterprice8393 Год назад +1

      @@LMAutoRepairs it is the original camera and mirror monitor that was fitted on the sports version of that year . 🤔 God only knows why they choose to use the tiny mirror monitor when it has an 8inch media screen 😳. But will remove the brake light cam and see if there is any indication that it’s NTSC Or PAL the only reason I can think of for using the mirror monitor.

  • @CarsExposed
    @CarsExposed 5 лет назад +1

    Top work mate good to know 👍👍👍

  • @electronic7979
    @electronic7979 5 лет назад +2

    👍

  • @anassboushabi378
    @anassboushabi378 5 лет назад +1

    Well done. Great job😊😊

  • @ΧρηστοςΑγρινιο-γ9φ

    Great video...... thank you.....
    A friend have same trafic 2014 with lan5200wr1 navi, do you know if the procedure is the same?

    • @LMAutoRepairs
      @LMAutoRepairs  Год назад +1

      Probably very similar if not the same...
      👍👍👍

  • @matushodor4725
    @matushodor4725 5 лет назад +1

    Perfect work, thanks for a video 👍

  • @thomasbronts
    @thomasbronts 5 лет назад +1

    Good job!! Nice done.
    I have the camera in the back mirror.
    Its not nice but it works.
    Question, how do you get the a pilar off, i dont get it off for my radio dab antenna on the roof.

    • @thomasbronts
      @thomasbronts 5 лет назад

      Can you make a video how to?

    • @LMAutoRepairs
      @LMAutoRepairs  5 лет назад

      All clips...
      Thank you for watching and for your comment!

    • @thomasbronts
      @thomasbronts 5 лет назад +1

      LM Auto Repairs i know i working 2 hours on it and i dont get it off haha. I try everything whit interior spoons.

  • @davidhodgson7890
    @davidhodgson7890 4 года назад +1

    Great video I have done a very similar thing but using a wired harness coming out of the media nav (bought on ebay ) but the media nav display is saying camera is damaged or not connected. please can you help

    • @LMAutoRepairs
      @LMAutoRepairs  4 года назад

      Don't know what you bought or how you installed... check that everything you bought is in good working order...
      Thank you for watching and for your comment!

  • @housekamu3969
    @housekamu3969 2 года назад +2

    Thanks for the video and really informative, could you please tell me which software did you used for coding ?

  • @grahamstewart6544
    @grahamstewart6544 3 года назад +1

    Hi great video, have you got any links or tips on how to remove the glove box.

    • @LMAutoRepairs
      @LMAutoRepairs  3 года назад

      No sorry... but if I recall correctly is not much more than a few screws...
      Thank you for watching!

  • @TheBusby1
    @TheBusby1 3 года назад +1

    Hi great video, what's the best way to remove the a pillar trim? I'm finding it super hard

    • @LMAutoRepairs
      @LMAutoRepairs  3 года назад

      I can't recall now how exactly comes off...
      But I believe it is just pull out...🙄🤔
      👍👍👍

  • @fuzzs8970
    @fuzzs8970 4 года назад +1

    Thanks for sharing. Really interesting

  • @mustaphaessahihi1762
    @mustaphaessahihi1762 5 лет назад +1

    Hi, Louis thank you for the video like always great work. Regarding the pinout of the camera cable "video +12v and GND" in that plug where did you get it?

    • @LMAutoRepairs
      @LMAutoRepairs  5 лет назад

      Hi
      Google... found a picture with it...
      Thank you for watching and for your comment !

  • @danman9017
    @danman9017 5 лет назад +1

    wow nice work

  • @Wiejoewiejoewagen
    @Wiejoewiejoewagen 5 лет назад +1

    Great video as always!
    Do you know if it would be possible to retrofit the radio unit, ours just has a 1 din radio, which obviously can not display a camera image?

    • @LMAutoRepairs
      @LMAutoRepairs  5 лет назад

      Most likely yes...
      You might need the center console trims etc....
      Thank you for watching and for your comment!

  • @pedroMJLB
    @pedroMJLB 5 лет назад +1

    As linhas não mudam rodando o volante porque provavelmente não fizeste a calibração na Clip. Tem lá essa opção...

    • @LMAutoRepairs
      @LMAutoRepairs  5 лет назад +1

      Possivelmente...
      Eu não sei se dá em carrinhas sem ESP... já que estas por princípio não têm sensor the ângulo de direção...
      Da próxima vez investigo isso...
      Obrigado pela dica!😉

    • @pedroMJLB
      @pedroMJLB 5 лет назад +1

      @@LMAutoRepairs todos têm ângulo de direcção, até o meu clio dci85 de 2006 tem e não tem ESP 👍

    • @LMAutoRepairs
      @LMAutoRepairs  5 лет назад +1

      @@pedroMJLB
      Possibly...
      Thanks!

  • @beluxauto5968
    @beluxauto5968 5 лет назад +1

    explained perfectly

  • @awolmadandy
    @awolmadandy 2 года назад +1

    will clip be able to program the vauxhall variant?
    I have the 2018 with upgraded navigation head unit.

    • @LMAutoRepairs
      @LMAutoRepairs  2 года назад

      No... Clip is for renault...
      👍👍👍

    • @awolmadandy
      @awolmadandy 2 года назад +1

      @@LMAutoRepairs ok, is it possible to retrofit the camera to the vauxhall variant? Guess so as it's the same head unit.

    • @LMAutoRepairs
      @LMAutoRepairs  2 года назад

      @@awolmadandy
      I would say yes... but I have never attempted on a vauxhall...

  • @wilbertkoskamp5338
    @wilbertkoskamp5338 4 года назад +1

    thank you for the video is there no code on these radios?

    • @LMAutoRepairs
      @LMAutoRepairs  4 года назад

      Don't think there is...
      Thank you for watching!

  • @titouan_g
    @titouan_g 3 года назад +1

    Thank you very much for this video ! Have you had any feedback on Renault trafic 3 2027 ? The software clip is the same for this generation ? Thanks again

  • @5ivepillarsofislam
    @5ivepillarsofislam 2 года назад +1

    Where are you based and how much do you charge

  • @parkay3560
    @parkay3560 4 года назад +1

    can you link to the cable you mentioned thank you?

  • @Chris-op2hd
    @Chris-op2hd 4 года назад +2

    Hi LM, great video! I don't have the software. I've got an NTSC camera and adapter for thr Media Nav unit but I don't have the clip coding software or obd plug. Do you know where I can get the media nav unit programmed to recognise the rev camera? Thanks!

    • @LMAutoRepairs
      @LMAutoRepairs  4 года назад

      I believe you can update the unit with a software already with the camera enabled...
      I remember when I was doing this, found some information about it...
      Just google it...👍👍👍
      Thank you for watching!

    • @Chris-op2hd
      @Chris-op2hd 4 года назад +1

      Thank you LM. I did this and it worked. I have a working ntsc reverse camera hooked up to the media nav unit. Top tip: you can save yourself some work and buy a video adapter for £4 off ebay. 😊

    • @LMAutoRepairs
      @LMAutoRepairs  4 года назад

      @@Chris-op2hd
      Well done!
      Thank you for the feedback!

    • @jasondavies1701
      @jasondavies1701 2 года назад +1

      @@Chris-op2hd sorry to revive old post, did your camera plug and play in the end with the adaptor lead? Did you need to code nav unit? I'm the same as you no coding experience or equipment.
      Any help would be greatly appreciated 😃👍

    • @croeternal
      @croeternal 6 месяцев назад

      Have a same question..?​@@jasondavies1701

  • @thomasbronts
    @thomasbronts 4 года назад +1

    He good work!!
    How did you fit the 12v socket?
    Do you have a how to?

    • @LMAutoRepairs
      @LMAutoRepairs  4 года назад

      Hi
      No... i have not recorded that...
      😔

  • @cultproduct
    @cultproduct 5 лет назад +1

    Hi, Nice video, Thanks for sharing.
    Can Maxisys also code this level on Renault or only Clip?

    • @LMAutoRepairs
      @LMAutoRepairs  5 лет назад

      Don't think was capable of this specific one...
      Thank you for watching and for your comment!

  • @donalhogan4812
    @donalhogan4812 3 года назад +1

    Help! I got the trim off, took the four screws on the MediaNav monitor off and pulled the monitor out. It comes out around 50 mm but not any further. Seems to stick there. I cannot get to the back of the unit. Any ideas?

    • @LMAutoRepairs
      @LMAutoRepairs  3 года назад

      It should just slide out...
      Unless the loom caught somewhere at the back... juggle it a bit see if moves...
      👍👍👍

  • @20KeYoN20
    @20KeYoN20 3 месяца назад +1

    I’m in Heathrow can you fit this for me on my 70 plate van

    • @LMAutoRepairs
      @LMAutoRepairs  3 месяца назад

      😊
      I am way to far... surely you have someone closer that can do the same...
      👍👍👍

  • @richardfirestorm5862
    @richardfirestorm5862 3 года назад +1

    Pls can you tell me where to get the reverse signal from on the van thanks ?

    • @LMAutoRepairs
      @LMAutoRepairs  3 года назад

      I have explained where I got it from in this case, 22:00 ...
      Thank you for watching!

  • @CANDiagnostic
    @CANDiagnostic 5 лет назад +1

    ótimo trabalho amigo

    • @LMAutoRepairs
      @LMAutoRepairs  5 лет назад

      Muito obrigado!
      Vejo que andas a aprender umas coisas!
      Muito bem!
      👍👍👍👍

  • @codexTu
    @codexTu 4 года назад +1

    Olá LM. Uma pergunta sabes se com o renolink dá para ajustar o limitador de velocidade máxima nos megane 4, Talismán, kadjar etc?

    • @LMAutoRepairs
      @LMAutoRepairs  4 года назад

      Olá!
      Nunca experimentei, mas eu diria que sim...
      👍👍👍

  • @richardkhoza2878
    @richardkhoza2878 5 лет назад +2

    Lm do you have idea how can I update Benz navigation maps

    • @LMAutoRepairs
      @LMAutoRepairs  5 лет назад +1

      Never investigated that...
      I presume the maps will be out there... but surely some sort of installation key will be needed?🤔
      Sorry, as I said I never checked that...😔
      Thank you for watching!

    • @stevehayes6661
      @stevehayes6661 5 лет назад +1

      Google and a keygen are required spend 30 minutes on Mercedes forums and you can find what your after.

  • @andrewshakespeare6268
    @andrewshakespeare6268 4 года назад +1

    Hi could you please let me know what software you used
    Thanks

    • @LMAutoRepairs
      @LMAutoRepairs  4 года назад

      Hi
      Renault Clip
      Thank you for watching!

  • @soldiers303
    @soldiers303 5 лет назад +1

    is it possible to do this on a 2014 megane tomtom live?

    • @LMAutoRepairs
      @LMAutoRepairs  5 лет назад

      Never researched it for car... sorry...
      But if there is versions from factory that come with it, surely it is possible!
      Thank you for watching and for your comment!

  • @anapaulapereira3255
    @anapaulapereira3255 5 лет назад +2

    muito bom video eu telho 1 radio 2 din android xines nao sei ligar no volvo v50 e tudo divrente da fixa iso

    • @LMAutoRepairs
      @LMAutoRepairs  5 лет назад

      Deve conseguir arranjar um adaptador...😉
      👍👍👍

  • @waynebutler9799
    @waynebutler9799 4 года назад +1

    hi what cable do you need to be able to connect to the diagnostic? thanks

    • @LMAutoRepairs
      @LMAutoRepairs  4 года назад

      In this video I was using clip...
      Thank you for watching!

    • @waynebutler9799
      @waynebutler9799 4 года назад +1

      Ok but I thought clip was the software but which obd2 cable did you use the 1 that connects your laptop to the Van's obd2 socket. thanks

    • @LMAutoRepairs
      @LMAutoRepairs  4 года назад

      @@waynebutler9799
      Again, clip...
      Google renault clip vci...

    • @waynebutler9799
      @waynebutler9799 4 года назад +1

      @@LMAutoRepairs ok sorry i miss understood i just thought the software was called clip. do you need a clip to be able to connect or can you just get a cable that will work, thanks

    • @LMAutoRepairs
      @LMAutoRepairs  4 года назад

      @@waynebutler9799
      Clip software is for the clip vci...
      There is other cables for renault, which uses other softwares...
      👍👍👍

  • @1988jimbob
    @1988jimbob 3 года назад +1

    Do you know if can be coded with renolink?

    • @LMAutoRepairs
      @LMAutoRepairs  3 года назад

      I would guess it can... but I never tried...
      Thank you for watching!

  • @richardbrown8427
    @richardbrown8427 5 лет назад +1

    Hi did you use a normal obd2 plug in for that software or something else. Many thanks.

    • @LMAutoRepairs
      @LMAutoRepairs  5 лет назад

      This....
      rover.ebay.com/rover/1/710-53481-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fitm%2FInterface-Obdlink-SX-USB-Renolink-1-83-Official-Ddt-2000-Multidiag-Renolink%2F223682136268%3Fhash%3Ditem34147e88cc%3Ag%3AqqwAAOSwHxRdjLC1&campid=5338344466&toolid=20008
      Thank you for watching!

    • @richardbrown8427
      @richardbrown8427 5 лет назад +1

      Cool thanks for that. After watching your cruise control video I've done the same to my van. Many thanks

    • @richardbrown8427
      @richardbrown8427 5 лет назад +1

      What software did you use to code the camera. It looks like it said clip?

    • @LMAutoRepairs
      @LMAutoRepairs  5 лет назад

      @@richardbrown8427
      Yes... clip will also find the job...
      👍👍👍👍

    • @richardbrown8427
      @richardbrown8427 5 лет назад +1

      Have you retro fitted a light and rain sensor for a 64 trafic

  • @majazyoussri5243
    @majazyoussri5243 5 лет назад +1

    أنت رائع 👍👍👍👍👍

  • @blazevicstanko6109
    @blazevicstanko6109 Год назад +1

    Hi, I downloaded CLIP V226, but it doesn't work on my PC which runs on Win 11. Do you know any solution for win 11 ?

    • @LMAutoRepairs
      @LMAutoRepairs  Год назад

      Laptops are dirty cheap nowadays...
      Just get one and install a fresh supported operating system...
      👍👍👍

    • @blazevicstanko6109
      @blazevicstanko6109 Год назад +1

      @@LMAutoRepairs Thank you for the answer. The mine is not dirty cheap, it's brand new and runs on Win11 64bits. Nowadays laptops are allways 64 bits. I see that CLIP runs only on 32bits systems. Is it right ?

    • @LMAutoRepairs
      @LMAutoRepairs  Год назад

      @@blazevicstanko6109
      I was not saying that your computer was cheap...
      What I said is, you can buy a used cheap laptop just for that...
      👍👍👍

    • @blazevicstanko6109
      @blazevicstanko6109 Год назад +1

      @@LMAutoRepairs Sorry, I misunderstood the answer.🥴 I will try your solution then. By the way, I tried on a Windows XP running on a Virtual Machine on my laptop, and I got the same error : CLIP did not accept Win XP. What system are you using ?

    • @LMAutoRepairs
      @LMAutoRepairs  Год назад

      @@blazevicstanko6109
      I am on XP... but I am still using an hold version of clip...
      But I believe newer versions of clip need win7... or something like that...
      Do a bit of research and you will find it...

  • @osrc22
    @osrc22 4 года назад +1

    Hi what colour is the reverse light wire?

    • @LMAutoRepairs
      @LMAutoRepairs  4 года назад

      Can't remember now...
      🤷‍♂️

    • @osrc22
      @osrc22 4 года назад +1

      @@LMAutoRepairs lol no problem cant seem to find them any where

  • @mobreyngambi1052
    @mobreyngambi1052 5 лет назад +1

    Nice one

  • @4642mati
    @4642mati 5 лет назад +1

    Super 👌

  • @pedroMJLB
    @pedroMJLB 5 лет назад +1

    Great

  • @joes6088
    @joes6088 3 года назад +1

    Yeah, al the stuff your saying is not worth watching are exactly the things I wanted to see, removing the trim, conduit , running the cable etc.

    • @LMAutoRepairs
      @LMAutoRepairs  3 года назад

      I tend to skip the basics...
      Sorry if was not helpful...
      Thank you for watching!