Products that we use and recommend: ► Original Oil Filter: amzn.to/2M8MExi ► Liqui Moly Oil: amzn.to/2wSdBQl ► Assorted Fuses: amzn.to/4f6qJos ► Panel Removal Set: amzn.to/3YiMADu ►Torx Set: amzn.to/2hbyWgd ► Tool Set: amzn.to/3p5MM6t ► Screwdriver Set: amzn.to/3XRB28Q ► Engine Oil: amzn.to/3xBc8B9 ► Oil Filter: amzn.to/3w0Ulme ► Torque Wrench: amzn.to/32qyRwg ► Liqui Moly Engine Flush: amzn.to/3IiDBID ► OBD Scanner that we use most often: amzn.to/3I4MQfe ► Check out our Amazon Store for the tools and parts that we use: www.amazon.com/shop/worldmechanics
to those that want to try this service on their own, please pay special attention to the position of top O-Ring, make sure you put the new ring on the correct groove, otherwise you will have a oil leak
Mercedes have an Electronic Oil Level test, which you access by pressing the Trip Meter reset rapidly 3 times and then turning the Key to start position 2. It will test the level and give you an "OK". Further through the menu, it will actually tell you how much Oil your Engine is currently holding.
For the m271 engine you need a little ofer 5,8 liters of oil and 0w40 for very cold climates and 5w40 for the rest pf the climates of fully synthetic 229.5 grade (not 229.51!) oil, preferably mobil 1, liqui molly, motul and many more.
The large oil filter o- ring should not be in the top groove. It should be in the next groove down otherwise the o-ring will not go into the filter housing and if dry it can break. I found this out the hard way. Tried to torque to 24 Nm and destroyed the o-ring. After researching the ‘net I realised what I was doing wrong. It would have been helpful if your video advised of this easily made mistake.
the suction changer goes to the same job for about 15 minutes😉 the precipitate also leaves, there is no need to remove the bottom armor, nor to lift the car.
@M A when the oil is warm then it absorbs easily..have but be a good vacuum device ..I have already 6 years have changed many the car from above... neat work if there is an above oil filter cartridge
Hi Guys ,thanks for your videos , do you have a video on changing the injectors on the same White C180 ,also one on changing the mechanical Cam adjuster. thanks
Dude I am astonished, l now own a 2 door c250! 2012 and recently sold my 06 cayenne s because eit started ticking haha and their both midnight black :)
Yes sir, can you plz help me out with my problem, I had 2009model c200 kompresor and troble code p0045 and it's say supercharger boost control solenoid circuit A open, where can I find the boost control solenoid circuit, tnx
Products that we use and recommend:
► Original Oil Filter: amzn.to/2M8MExi
► Liqui Moly Oil: amzn.to/2wSdBQl
► Assorted Fuses: amzn.to/4f6qJos
► Panel Removal Set: amzn.to/3YiMADu
►Torx Set: amzn.to/2hbyWgd
► Tool Set: amzn.to/3p5MM6t
► Screwdriver Set: amzn.to/3XRB28Q
► Engine Oil: amzn.to/3xBc8B9
► Oil Filter: amzn.to/3w0Ulme
► Torque Wrench: amzn.to/32qyRwg
► Liqui Moly Engine Flush: amzn.to/3IiDBID
► OBD Scanner that we use most often: amzn.to/3I4MQfe
► Check out our Amazon Store for the tools and parts that we use: www.amazon.com/shop/worldmechanics
to those that want to try this service on their own, please pay special attention to the position of top O-Ring, make sure you put the new ring on the correct groove, otherwise you will have a oil leak
This the best and clearest description video above all others. Excellent.
Thanks for including the socket sizes 🙌
Hello. Great video guys. Could you do a video on changing the transmission fluid ?
Mercedes have an Electronic Oil Level test, which you access by pressing the Trip Meter reset rapidly 3 times and then turning the Key to start position 2. It will test the level and give you an "OK". Further through the menu, it will actually tell you how much Oil your Engine is currently holding.
I thank you so much for this comment. Hopefully my c250 has this feature.
@@Fractal_blip it definitely should. It is a common feature in MBs and very handy to get to know.
For the m271 engine you need a little ofer 5,8 liters of oil and 0w40 for very cold climates and 5w40 for the rest pf the climates of fully synthetic 229.5 grade (not 229.51!) oil, preferably mobil 1, liqui molly, motul and many more.
I live in west Europe i used 5w40
Next oil change im thinking 0w40 to go for maybe mobil or Rowe
@@easyrider020dont do it. Mine made all sorts of noises with the thinner oil
@@easyrider020 Thanks for your like. I would recommend the Original, Motul or Ravenol 5w-40 229.5 (all fully synthetic)
When you remove the old "O" rings.....use a toothpick o you don't damage the plastic filter housing..
Thanks, best video on this subject! 🎉
The large oil filter o- ring should not be in the top groove. It should be in the next groove down otherwise the o-ring will not go into the filter housing and if dry it can break. I found this out the hard way. Tried to torque to 24 Nm and destroyed the o-ring. After researching the ‘net I realised what I was doing wrong. It would have been helpful if your video advised of this easily made mistake.
the suction changer goes to the same job for about 15 minutes😉 the precipitate also leaves, there is no need to remove the bottom armor, nor to lift the car.
timo mannila where do you buy a suction changer please post amazon link
@M A when the oil is warm then it absorbs easily..have but be a good vacuum device ..I have already 6 years have changed many the car from above...
neat work if there is an above oil filter cartridge
@@DanGamano please use google.
@M A can also suck the filter housing empty👍
Hi , thank you for your videos, is there is a DIY service manual with videos that can be downloaded and kept ?
Good job sir.Kannst du sagen welchen Nuss du für den Ölfilter beim lösen benutzt hast? Dankeschön
Very very good excellent job👍
Nice video for our learning more maintenance
най-българския акцент, който съм чувал
What oil to use 5w30 or 5w40 ? Castrol or Liqui moly
I have 5w30 on my 2013 c300
Very helpful thanks from explore with mansur
Is Liqui Molly 5w-40 better than Mobile 1 0w-40?
I’m thinking on trying it out on my next oil change
Mobil1 is usually considered the best.
donkgated Mobile1 is shit.
@@Birdfeeder795
LOL numerous independent tests say otherwise.
donkgated Send me the link to these supposed tests. Mobile1 sucks and that’s a fact. Sluding and buring like a pile of shit.
Hello can you make a video on how to grease the sunroof
Brilliant guys very helpful and well explained. Thanks Scott.
Hi Guys ,thanks for your videos , do you have a video on changing the injectors on the same White C180 ,also one on changing the mechanical Cam adjuster. thanks
Thank You So Much this Channel Is Everything !!
Thanks guys. Very informative and detailed instructions. Well done 👍
i have a c200 K 2009 model 120000kms on odo...i use 5w30 in my car, no problems at all....i live in place where temp varies from 15⁰c -- 45⁰c
Good work sir
Hi my oil filter does not click into filter housing. It seems hard to push into the housing, can i still install back to the engine?
My driver seat recline all the way back but only comes back up half way any subjustions thanks in advancr
well done Sr. btw: the box beside the air intake box is it the ECU? kind regards
Thanks - helpful video.
You prefer 5w-40 but what does the manufacturer recommend?
Hi. Great video guys. Great work you do. Could you please do a video on changing the rear suspension on the same mercededs ?
Dude I am astonished, l now own a 2 door c250! 2012 and recently sold my 06 cayenne s because eit started ticking haha and their both midnight black :)
Thank you.
Hi, thank you for your clear information
Yes sir, can you plz help me out with my problem, I had 2009model c200 kompresor and troble code p0045 and it's say supercharger boost control solenoid circuit A open, where can I find the boost control solenoid circuit, tnx
Do you know where the AC water drain is? Car never leaks when I have my AC on. And car colds intermittently.
Great video, have you tried 5W30 oil? how was it? Is it better than 0W40?
Changed filter and oil with the help of Your video. Thank You!
What cup size is for the oil filter? 74mm or 76mm 14 flutes?
Can i just top up engine oil without draining it?
I don't have this car yet still watching=]
Is the car on jack stands or just being held up by the jack?
Looks like it's on a Jack, and has a tire under there too so if the jack fails it'll fall on the tire/ wheel.
Thanks guys!!
Oil drain plug torque spec is 30Nm
Hello brother i am ur subscriber from INDIA can u reply me i have a question
This is only for Engine M271. For the C180 was later then april 2012 the newer engine M274
So u did around 6 liter??
Hello, is the 5litres enough? Because some ppl said 6litres for w204
5.5LITRES
Hello my mercedes is E clas 2007 ( 320 cdi 165kw 224ps ) 290.000 km what is best oil ?
bivol gheorghe try Liqui Moly. I use it in my R class, same engine you have.
To have a good oil drainage, after oil pan plug removal, the car has to be lowered or maintained at a level position.
Thank you for this comment
Yeah but it is just a small amount 🤏. The oil filter will do the rest. Adding the new oil, the old left over oil will renew 🤷♂️.
How often should we change the spark plugs?
For well performance every 50.000km
i want to buy 1600 is it good?
ممكن ترجمه عربي وكم لتر تغير المرسيدس
I have this exact car.
Whay 229.31 or 229.51 ? Wich is better ?
229.5 is better.
229.5
Good yob
What kind of socket do you use to remove the oil filter with? :)
Is a 27mm
This is my work oil chenge
Erst mal , Ölfilterdeckel lösen und da ablasschraube lösen
Comprehensive commentary.
I wanna hear him say CALIFORNIA
Y'all boys don't have n e ramps to drive it up on to have more working room?
Very risky , why not use jack stand.
wrong oil, you should use mb 229.5
unnamed wrong.
Technically that is 5w40 so he is probably ok
Can't see anything you are working on. You're just working. Not helpful
eurrroooopean