I had the exact same pen you had and a few months ago I tried to use it and it wasn’t working it was just not letting the filament go in but it worked perfectly fine beforehand do you have any ideas to help?
Дурочек что ли совсем на кой хер ты своими кривульками толкаешь пластик прямо давишь на него, когда достаточно всего лишь чуть чуть только чтоб он вошел туда, дальше моторчик сам все сделает
Thank you so much this helps so much I really didn’t know how to do anything I didn’t even know that you had to plug it in and laughing so hard
3D पेन फ्री में दे
Ygedegh
lol😂😂😂😂
NOOO IT GOT PINNED
Thanks bhai 3D pen ko chalane ke liye
I have the same 3D pen ❤❤
Very very very very nice pen
Thanks for video
Ty
Thank
😍☺
Fhddh
Wow 🤣✈️
Watchs? hey wey bye😂
thanks didi
Most welcome 😊
Kis kis ko ye dekh kar Oggy ki pencil yad aagayi
😂
Thank you so much much much much much much munchh munchh munchh munchh munchh munchh munchh
נ נח נחמ נחמן מאומןןן
Thank you so much I didn't know the instructions
They came with it.... 😭
@@Mreid704 yeah.... but uh my brother ripped it
U should never pull or push the filament or your 3d pen can be broken
And then u can't also fix it
𝕂𝕒𝕜𝕒𝕜 𝕔𝕒𝕣𝕒 𝕞𝕒𝕚𝕟𝕜𝕒𝕟 𝟛𝕕𝕡𝕖𝕟-𝟚😭😭😭😭😭😭
I have the same 3D 🖊️
59th and tysm
Amazing I need wou
Buy from amazon
I got the same pen so im gonna like
I have the same pen
Price
@MasifZahoor-zr4dz ₹999
@@MasifZahoor-zr4dz about $50
ננח
Amazing I need wun I don’t have wun
Buy from amazon
I did the same thing, but the numbers are almost invisible with her
Mine is not working properly filament is not coming like if u have same problem 😢
🙁
You just changed my life
Pls aap iska hame iska use oar
My question.Since i got my 3d pen the filament coming out from nozzle for no reason and i can't making anything
For the temperature, For those who don’t know, for PLA, The temperature should be around 200 degrees.
200-160. 200 makes quite a harsh burning smell so i always do 160
@@mipikin that’s true, but the hotter it is, the faster it dries
@@vyrnogtag ohhh i should do 200
I got it for christams and it helped out alot
I had the exact same pen you had and a few months ago I tried to use it and it wasn’t working it was just not letting the filament go in but it worked perfectly fine beforehand do you have any ideas to help?
Sorry 🙁no idea
When I plug mine in and have it on PLA mode, and hit the down button it doesn’t do anything..
I also have one but the plastic is not coming out
reverse it
Thank you 🎉🎉🎉❤❤❤ 😊😊😊😊
You are so welcome
Thanks I made a RUclips play button for my friend ♥️♥️
Kok1
Thank you
But my flament didn't came out😮
thank you so much
Not good but not bad
😃
How much cost
Is it hot ?
then I don' t had numberwhen I started it First time it was showing Pla
😀
I don't know what to do it is easy
It is easy to use
कितने मे लीया
Exact same one I got yay!!!
Thank you so much ❤
Open please
इसके कितने रुपए होंगे हमें जल्दी भेजना वापस
Yah kahan se kharida hai so nice mere pass bhi hai
@arhamalam437
From Amazon
😂😂😂
Thanks a lot for the help
3d pen
Kitne ki please batao mujhe lena hai
Below ₹1000 from amazon
how much 3d pen
₹999
Mine is different
How long does it take to hear up
With in a minute
കൊള്ളാം 👌 ❤️
I have the same pen!!
I have one but when I use it. I use the blue eye but it was a rainbow saw how young get rainbow
😭
3d pen kitne ka milega
Check amazon
Mount kitni hai 3D pen ki
Doston ham log Garib hai block 3D per mera naam Chahat Kumar
is it hot when you release the filament
Not much
litterally not me. @@Frznlittlecraft
Thanks 😊
Thanks for watching ❤️
Hi were did you buy your 3d pen😅😊
Amazon
Mine keep turn off so it doesnt heat 7p
It gives me error
Дурочек что ли совсем на кой хер ты своими кривульками толкаешь пластик прямо давишь на него, когда достаточно всего лишь чуть чуть только чтоб он вошел туда, дальше моторчик сам все сделает
😊
HELP ITS STUCK ON PLA, IF I HOLD THE FEED BUTTON IT TIRNS INTO NUMBERS BUT IF I LET GO, IT GOES BACK TO PLA
App ne ise Kitna ka mangvaya price bta do mene dekha to 800 rs ka tha
₹999
😳
It gonna hurt you.
Doston ko 3D pen de akshy Kumar
Sofiya😍😘💯❤❤
how to oder it
From amazon
I can't do it
omg i have the exact same one and same coler
😜😱
Jdkxjoxnskz
Mine shows error at 140° does anyone know smthing?? Thanks
Returned it and got another. Works fine
mine keeps saying "SLEEP" after I try waiting for it to heat up is that normal?
You need a powerful charger
@@TheSamsungCollector I use the one that cam in the box though and it worked before but now it doesn't 😫
Use your phones charger or something
@@TheSamsungCollector that definitely won't work
@@TheSamsungCollector Nope.. There are different kinds of chargers.
Abe khedi chalana to sikh le 😂😂😂
I don't work to me
Can some body help me with my 3d pen it start to heating up but it start to cool down so I unplug for a several time but it just stay at 20 😢
Can I oder
From amazon
Is it hot when using?
Filament is hot when it melts
of coure it is hot it is like hot glue gun
Mine shows yellow lights and the screen is blank what do I do?
🤔
Thank you a lot🙄
You're welcome 😊
Yo
Hot glue is better than this
Two completely different uses…
Price please
₹999
it's not working
😧
it litearly almost burned me to dEath,
What happened-
If you touch the plastic that comes out and you touch it instantly it burns you need to wait for the plastic to cool down
@@TheSamsungCollector oh, I guess I won't be buying it
@@TheSamsungCollector no, i touched the tip of the white bit n it burned me. (my new acc-)
How much price
₹999
My pen is not heating to 190 after 140 showing error
U should never pull or push the filament or your 3d pen can be broken
And then u can't also fix it
Thank you