Why would you introduce a screen after the straws - making the laminar flow less laminar by introducing turbulence back into the stream when the water flows over the screen? It's difficult to not have some imperfection in the nozzle but by adding a screen after the straws you're deliberately undoing the laminar flow you've just created.
What are the details? Water Inlet size, pipe diameter and length nozzle size gpm incoming water max distance and height achieved before any distortion was created in the stream from beginning to end?
I found a regular garden hose works just fine. I drilled a hole just big enough so I could jam the front end of the spray nozzle in the bottom, this worked great as I could adjust the flow rate and the hose simply clicked on. As for the hole in the top start small and see what works best for you and your water pressure just don't exceed the diameter of the incoming hose and you should be right. So you don't ruin a bunch of end caps use a piece of coke can on the inside and drill a hole in that. Getting the nozzle sharp on the plastic cap is time consuming. One thing the other videos don't explain is the importance of the low pass filter. You need one to remove the pump jitter from the water. I got a nice stream to go 5m with a 80mm pipe (300mm long) with a 20mm hose connector inflow and 12mm nozzle hole. Once that worked I couldn't help push it and then connected my pool pump to it. This went so high I could barely keep it within my backyard, something like 25m but it wasn't laminar
I want to use my pool pump to supply my jets and I will just gate down the flow to the heads to where I need it to maintain a laminar flow back into the pool. I thought of an Idea that I posted in the forum for a low pass. What if you were to remove some of the water from your cartriage filter, say about the top 10" and replace with air. This should make a great low pass filter right after the pool pump by adding 10" of airspring to remove jitter. My filter is 4 ft tall ans 12" in diameter. The filter inside should help smooth things out as well.
Hey I tried your idea out using pool pump and canister filter. It didn't really work, still needed the low pass filter. Here's a idea which I'd like to try but, make a laminar hose, with lots of smaller hoses inside it, that could potentially eliminate the need for the whole pvc and straws
Dam, I thought I was on to something. That's a pretty interesting idea on the hose, definitely let me know how it works out. You could also try a section of coffee straws few inches of sponge section of coffee straws etc... repeat numerous time and after a few feet show be little to no turbulence at all. Maybe feed a 2" flexible PVC hose with a 1" supply out a 1/4 nozzle. That should help slow water down before the exit point.
Hi I tried for leminar nozzle, but after some distance water spread. I want to know about LOW PASS FILTER. is top & bottom empty space are play a role of LOW PASS FILTER. what is air tank before leminar nozzle? Dear Sir I also tried for laminar, up to a extend I successes, but after a distance water spread. I use 4" dia pipe and 10" long and water jet hole is 12mm. pump is 18 meter head and discharge 6480 lph. I need water flow rate and pump specification
As far as I can tell they want a clearer explanation of what you did for your version 8. I'd like to know myself and I would suggest that you put in for a patent.
It's because after passing through the smaller tubes the water picks up turbulence. Straws should have been of smaller diameter and probably better filing of nozzle tip will produce a better 'laminar' flow
I sometime put this videos on at party's.
"Dude you've got the AUX, what do you want on?"
"LAMINAR FLOW!"
Honestly I am more impressed that you can buy vodka in a can. What an age we live in!
Ohhhh burn! But wait he'll just pour water it...
Why would you introduce a screen after the straws - making the laminar flow less laminar by introducing turbulence back into the stream when the water flows over the screen? It's difficult to not have some imperfection in the nozzle but by adding a screen after the straws you're deliberately undoing the laminar flow you've just created.
RIP headphone users.
well done - that is really cool :)
What are the details? Water Inlet size, pipe diameter and length nozzle size gpm incoming water max distance and height achieved before any distortion was created in the stream from beginning to end?
I found a regular garden hose works just fine. I drilled a hole just big enough so I could jam the front end of the spray nozzle in the bottom, this worked great as I could adjust the flow rate and the hose simply clicked on. As for the hole in the top start small and see what works best for you and your water pressure just don't exceed the diameter of the incoming hose and you should be right. So you don't ruin a bunch of end caps use a piece of coke can on the inside and drill a hole in that. Getting the nozzle sharp on the plastic cap is time consuming. One thing the other videos don't explain is the importance of the low pass filter. You need one to remove the pump jitter from the water. I got a nice stream to go 5m with a 80mm pipe (300mm long) with a 20mm hose connector inflow and 12mm nozzle hole. Once that worked I couldn't help push it and then connected my pool pump to it. This went so high I could barely keep it within my backyard, something like 25m but it wasn't
laminar
I want to use my pool pump to supply my jets and I will just gate down the flow to the heads to where I need it to maintain a laminar flow back into the pool. I thought of an Idea that I posted in the forum for a low pass. What if you were to remove some of the water from your cartriage filter, say about the top 10" and replace with air. This should make a great low pass filter right after the pool pump by adding 10" of airspring to remove jitter. My filter is 4 ft tall ans 12" in diameter. The filter inside should help smooth things out as well.
Hey I tried your idea out using pool pump and canister filter. It didn't really work, still needed the low pass filter. Here's a idea which I'd like to try but, make a laminar hose, with lots of smaller hoses inside it, that could potentially eliminate the need for the whole pvc and straws
Dam, I thought I was on to something. That's a pretty interesting idea on the hose, definitely let me know how it works out. You could also try a section of coffee straws few inches of sponge section of coffee straws etc... repeat numerous time and after a few feet show be little to no turbulence at all. Maybe feed a 2" flexible PVC hose with a 1" supply out a 1/4 nozzle. That should help slow water down before the exit point.
Yours is very bad. Go watch Experimentboy doing it, and learn what a perfect laminar flow is.
Hi
I tried for leminar nozzle, but after some distance water spread.
I want to know about LOW PASS FILTER.
is top & bottom empty space are play a role of LOW PASS FILTER.
what is air tank before leminar nozzle?
Dear Sir
I also tried for laminar, up to a extend I successes, but after a distance water spread. I use 4" dia pipe and 10" long and water jet hole is 12mm. pump is 18 meter head and discharge 6480 lph. I need water flow rate and pump specification
Excelente, podrias explicar de manera mas ludica como haz hecho la versión 8? porfavor
English?
Excellent, could you explain more playful way as you did the version 8? Please.
As far as I can tell they want a clearer explanation of what you did for your version 8. I'd like to know myself and I would suggest that you put in for a patent.
Grácias por la traducción
Dope dude! I just wish I could've seen better details 😸
Wtf is the music
Is that vodka in a can?
U betya :)
Whats driving the flow here? An actual pump or just water pressure?
Good question, it's a pump. Both ways still show pump jitter in the water too
the dance
Love the music. What is the name of the song please?
Thank you kind sir.
All that work when you could just grab your hose and turn it on 🤣
o que usas na ponta do tubo onde leva o leds?que tipo de leds voce usa?
Wait, canned vodka?
1:02 😂😂😂😂
Shit was hilarious asf! 🤣💀
why the music tho? makes no sense. hurts my speakers. makes my ears bleed. and I still havent seen the Laminar Flow cause of it
youtube stock music
it's not perfect laminar flow
It's because after passing through the smaller tubes the water picks up turbulence. Straws should have been of smaller diameter and probably better filing of nozzle tip will produce a better 'laminar' flow
Bhai kise bnaya bnana btao
rtx on!!!
Where did you get the hollow light tube?
its 10mm acrylic rod, you can get from any plastics company or eBay. just need to polish the ends so its nice and clear
@@djdegraaf ok thank you very much for your reply
Did I just learn how to make a pipe bomb? Cause that is clearly a pipe bomb at 1:36
haha house music realy ?
Might have looked better if the person filming didn't have Parkinson's.
WTF IS THE AUDIO PIECE EEEW
bad!!!
не ламинарный фонтан
No, you didn't nail it. NOT a laminar flow.
Steve Babine at least they tried
and you're NOT a nice person