Amiga 2000 Matsushita JU-363 Floppy Drive Alignment

Поделиться
HTML-код
  • Опубликовано: 13 дек 2024
  • Let's try to make this drive work better with an alignment. Not perfect results from this difficult drive, but it is a lot better.
    My Links (supports this channel, no extra cost to you)
    My eBay Store (Amiga VGA/HDMI Adapters, Optical Mice, Gotek Floppy, and more) = www.ebay.com/sc...
    My oscilloscope = amzn.to/3rutrN6
    My Website = www.retrofriend...

Комментарии • 7

  • @diegoadrianarevalo
    @diegoadrianarevalo 3 года назад

    In other videos that you have published I have seen how it fits. The previous question is no longer necessary. Thanks a lot!

  • @f1lupo
    @f1lupo 5 месяцев назад +1

    thanks this is same floppy drive in my Amiga 1000 external floppy drive- believe it was Model 1010

  • @harryc53
    @harryc53 3 года назад +1

    Thank You

  • @wimwiddershins
    @wimwiddershins 3 года назад +1

    Years ago I scored an A500 for cheap because the guy said the drive was broken. It turned out the floppy detect switch was dirty, quick squirt of contact cleaner...

  • @diegoadrianarevalo
    @diegoadrianarevalo 3 года назад +1

    Hello, I ask you a question about the alignment process. In the video it is not clearly seen in screws the screwdriver is put to be able to adjust the heads of the floppy disk. Only the screen of the Amiga test kit is shown, which under the process is stabilized on 11/11, but it is not clear in which places in the floppy drive the adjustment is made. Could you help me with this topic? Thanks and regards

    • @retrofriends
      @retrofriends  3 года назад +2

      Check the previous video in the series, where I show where the screws are on most drives.

    • @diegoadrianarevalo
      @diegoadrianarevalo 3 года назад +1

      @@retrofriends thanks!!!