help! I am buying my 4th charger in a week and I am going to get shouted at if I tell them it doesn’t work AGAIN! I cleaned all the lint and mess in both iPad and wire. The wire looks clean and there was no mess in in whatsoever. I cleaned all the plugs. I plugged it in, still, DOEST WORO! Somebody HELP PLEASEEE! When I buy new chargers they work and then all of a sudden they stop working! I’m so tired of this..
Why to fix , if everybody has same problem, it means there is a mistake in these cables Apple produces, I am a big Apple fan but I bought more than 20 cables for my 2 iPhones in the last 5 years
5 лет назад+16
I'm an Apple user since 2006 and I'm so disappointed in some areas of Apple quality. For instance, this cable issue... Buying a new one and throwing the old one in a trash bin is the simplest way. The 3-foot wire is not a big problem in a one trash bin, but if You multiply this X times... That's why repairing things if it's possible is so important. Less electro trash = better future for the next generations. Apple is so worried about the environment, so why are they selling such a garbage? It made me sad and angry!
apple, one of the most reputed company is producing such a worse cable.😀😀😀😡🤬🤬 Feeling shame in front of others some time. but nobody will agree with me because they are satisfied with this limited facility phone with high reputation 😏 Praise apple more. The will give something in future😋😋
5 лет назад+2
I agree with your opinion in 100% but this doesn't change the situation (unhappy).
LONG NEEDLE NOSE PLIERS work the BEST! Insert the head of the pliers into the tube and then open the pliers. The handles of the pliers give you the leverage and control you need to stretch the tube without breaking/tearing. I can stretch a tube in about 30 secs with the needle nose pliers versus other methods.
5 лет назад+1
Long needle nose pliers do the job. This video is DIYish as possible ;)
This works. I did this a while back and it last for another 6 months then it finally stopped working.
5 лет назад
I'm so sad to hear that your USB cable lasts in good condition for only 6 months. Mine works since I recorded this video. Use this method with a new one. It should protect the new cable.
The scissor stretching technique was what I needed. Almost gave up on trying to fix the cable with heat shrinking tube, until I saw this video. Thanks a lot, mate!
Pick up some heat shrink tubing that has an ID of between 6 and 6.5mm. Look for a shrink ratio of at least 3:1. 4:1 if you can find it. That will eliminate the need to stretch smaller ID 2:1 tubing. It will make for a simpler, and better repair.
Personally, I think a better repair would include shrinking the tubing over the molded plastic part of the plug to help reinforce the entire cable and limit flexing at the weak point. I just did this and it virtually eliminated the flexing. I used a small diameter heat shrink tube and used the scissors to expand the tube so that I could get it over plug.
Be very careful when heating the shrinking tube because the plug will deform when being heated to the same temperature as the tube, it will deform and crack and not look nice anymore.
So, you really didn’t know what you were doing, did you? Just figured it out as you made the video which made it twice as long as it needed to be.
5 лет назад+2
This is how to Speeding Up RUclips Videos: 1. Click on the Settings icon. Find the drop-down box that indicates Speed. Click on Speed. 3. Scroll to your preferred speed, such as 1.25, 1.5 or 2 times the normal speed. 4. Click “Play.” The video will play at a faster rate 🤓
Tasneem Mountaj if the break is further down the wire, you can solder the wires together but if it’s close to the plastic connector part you will need to cut into the plastic carefully and desolder the wires from the pcb then solder the wires back onto the pcb and insulate the whole thing with heat shrink and hot glue. A lot of work so if that’s the case you’re better off buying another cable and ensure that you only buy an apple or apple verified one because most offbrand ones will not work and a pop up will show on ur screen saying the cable is not apple verified, even if it works at first, after you update your iOS then the cable might not work anymore.
5 лет назад+1
@@P2BS97 the time and cost of repairing fully damaged wire in most cases are unprofitable. If you need to repair broken connectivity you need to use a soldering iron. flightworks explained this process. Hope it was helpful. Let us know how the repair goes.
help! I am buying my 4th charger in a week and I am going to get shouted at if I tell them it doesn’t work AGAIN! I cleaned all the lint and mess in both iPad and wire. The wire looks clean and there was no mess in in whatsoever. I cleaned all the plugs. I plugged it in, still, DOEST WORO! Somebody HELP PLEASEEE! When I buy new chargers they work and then all of a sudden they stop working! I’m so tired of this.
4 года назад
Consult this issue with apple support. It may be a problem with iPad not a charger
Oh it works perfectly fine now :) You see, I have this charger which is like a Samsung charger with a part of the iPhone bit and the Samsung part never worked so that’s what made it ‘broken’
Just wrap some electric isolation tape (made for it) around it. Quick, safe and cheap !
6 лет назад+3
Try to use heat shrinking tube, it looks way much better than electrical tape. No sticky cord or unsticking tape. Tested! Still looks and work pretty fine after over one year.
Cezary Lopacinski we just need to stick the insulation tape or the so called electrical tape? Or should we also use hair dryer on the insulation tape??? Sry if this question is ignorant or stupid.. I have never worked with these b4 that’s y TIA
4 года назад+1
If you using electrical tape for this repair, you don't need to use a hairdryer. Hot air is necessary for heat shrinking tubing.
For some reason the description was not visible on the iPad where I first saw this. Thanks.
5 лет назад
Yesterday I discovered similar errors on the iPhone. There are two different types of tubes, low and high quality. The high-quality heat shrinking tubes are easier to stretch. The low-quality ones are made with the kinda shiny material/plastic. The better quality tubes are matt (they look and feel similar to the new Apple cords). The high-quality tubes are more expensive, and hard to find, but worth it! Let me know how it goes!
Dear sir . I’m shawn , thank you for show us this video n I have 2 iPhone cable happen that ways. Where can I find that kind of plastic tube? And what it’s call for the term name that plastic tube? 😊👍👍
6 лет назад+2
Search for "the heat shrinking tube", you can find it online or in a local hardware store (electrical department). There are two different types of tubes, low and high quality. The low-quality ones are made with the kinda shiny material/plastic. The better quality tubes are matt (they look and feel similar to the new Apple cords). The high-quality tubes are more expensive, and hard to find, but worth it! The high-quality heat shrinking tubes are easier to stretch. Thank you for the comment and let me know how it goes! 😀👍👍
Good idea but self fusing silicon rubber electrical tape is easier and faster.
5 лет назад+2
Yes, good point. The self-fusing silicon rubber electrical tape is easier and faster and way much better than regular electrical tape but doesn't look good as a heat shrinking tube. At least in my opinion. In this video, it's all about the good-looking effect. It's a hard way but looks more esthetic.
i have a question? What is that tube? U were using?
5 лет назад
It's a regular heat shrinking tube without adhesive. In the description, there are some links to the Amazon pages. Those link will guide you to specific tubing. Hope it helps. Let me know how it went.
Thanks for your time and share. Very useful if you don't have any chance to buy another one. It's good learn how to fix it. It's good to develop your abilities. Thank you.
5 лет назад+1
I'm happy that this video was helpful. Let me know how it goes/went!
Гениально, ничего не скажешь. Только вот не одну лишь "яблочную" технику так "чинить " можно. Любые кабели, у которых оболочка лопнула, а жилы целые. Главное ТУТик найти нужный
6 лет назад
I don't understandthe Russian language. Try to write the comment in English. I'll be happy to answer your question.
Thanks for sharing. Why can't Apple strengtened that fraying prompt section. A simple survey will let them know how to do product improvement. I fixed mine by electrical tape.
5 лет назад+2
I believe they know what they doing. It's all about the money, sadly.
5 лет назад
I'm Mac user since 2006 and my old, very first White MacBook's (still working day by day just for emails and RUclips) charger is in good condition. My MagSafe 2 from 2012 and all iPhone's cords after one year of usage are looks like garbage.
Google for: shrinking tube, heat shrink tube or heat-shrink tubing. You'll find some links to online stores or direct sales in Google. Buy shrinking tube (2:1) in diameter of 4.8 mm shrinking to 2.8 mm. It's important. I bought tubing in a local hardware store (electrical department). There are two different types of tubes, low and high quality. The high-quality heat shrinking tubes are easier to stretch. The low-quality ones are made with the kinda shiny material/plastic. The better quality tubes are matt (they look and feel similar to the new Apple cords). The high-quality tubes are more expensive, and hard to find, but worth it! There are also tubing with adhesive (more expensive than regular). In the description of this video, you'll find more information. Good luck my friend and let me know how it goes!
puedes poner un video como repara cable magsafe2 de macbook pro?
6 лет назад
Yo no hablo español. Google Translate: Can you put a video like a repair cable MagSafe 2 from MacBook pro? You can watch a video here/Puedes ver el video aquí: ruclips.net/video/usHPsIX5fhs/видео.html Its more time consuming, but the results are decent.
Any issues if you just wrap up with an insulating tape??
6 лет назад
Try to use heat shrinking tube, it looks way much better than electrical tape. No sticky cord or unsticking tape. Tested! Still looks and work pretty fine after over one year. Try to achieve this result with electrical tape, in my opinion, it is impossible.
Did your charger already work beforehand because mine doesn’t work and it’s also breaking, so I’m not actually sure of mine will work just by covering broken part.
3 года назад
If it doesn't work, it's broken and the heat shrinking tube won't repair the MagSafe. Probably you need to replace the whole cable or solder the wire
Thank you! I had the idea to reinforce my iPhone cable with heat shrink but I couldn't figure out the sizes I needed! I didn't realize you could stretch it LOL. Keep up the good work, ignore the haters. 😀
5 лет назад
Shrinking tubes are great stuff... Great to hear that... That's the plan!
Help please , I bought my iPhone 11 just 7 months ago but my adapter stopped working suddenly so I bought a new adapter and after charging for a week it stopped working again . I used my USB cable in other chargers and it worked.what could be the reason my adapter gets spoiled all the time??can it be that I have a defective cable that burns the adapter?? Please help
4 года назад+1
There is a one-year limited warranty from the date of original retail purchase for Apple products. If the charger stopped working after 7 months just contact with Apple support and they will help you
Not all hair dryers are created equal. I had to use mine for so long to get the plastic to melt that it blew the electrical circuit and I lost Power to an entire room.
3 года назад
Sad to hear that. The shrinking tube you pick was new?
Can’t you just use strong tape on it? It’s so much simpler.
6 лет назад+2
The tape is much simpler in application but less esthetic overall. After a couple of days or weeks (depend on tape) repaired place get sticky. I've tested a couple different tapes. The heat shrinking tube repair is more time consuming but looks and works way better than tape. In my opinion, of course.
Buy shrinking tube (2:1) in diameter of 4.8 mm (up to 6.4 mm) shrinking to 2.8 mm (up to 3.2 mm) or (3:1) up to 9 mm. It's important. There are two different types of tubes, low and high quality. The high-quality heat shrinking tubes are easier to stretch. The low-quality ones are made with shiny material/plastic. The better quality tubes are matt (they look and feel similar to the new Apple cords). The high-quality tubes are more expensive, and hard to find, but worth it! There is also tubing with adhesive (more expensive than regular). 3:1 tubes are more expensive than 2:1. In the description of this video, you'll find more information. Good luck my friend and let me know how it goes!
I just put a regular piece of tape over mine until my replacement comes from amazon in 2 days. Hopefully the tape doesn't hot I did not have electrical tape so will only charge when at home until my replacement comes. Not getting hot.Does this happen to a lot of people?
6 лет назад+1
This is common issue for MacBook users. Regular tape is not safe, cord may get fire because of this tape. Use electrical tape or avoid to use MagSafe with damaged cord. If You must use MagSafe be careful. Heat or electrical shock may be danger for your health or even life!
use liquid electrical tape then the heat shrink tubing if you want
5 лет назад
Good point! The liquid electrical tape gives almost the same results as a heat shrinking tube. If you combine both methods in a proper way, it may give a great final look. But there is one kinda problem, the liquid electrical tape is more expensive than heat shrinking tube so the repair is going to be more expensive. It may be a problem for some reason. For me, it's not a problem. Thank you for the advice!
In which shop that shrinking tube was available.. Please tell me that
4 года назад+1
Google for: shrinking tube, heat shrink tube or heat-shrink tubing. You'll find some links to online stores or direct sales in Google. Buy shrinking tube (2:1) in diameter of 4.8 mm (up to 6.4 mm) shrinking to 2.8 mm (up to 3.2 mm) It's important. I bought tubing in a local hardware store (electrical department). There are two different types of tubes, low and high quality. The high-quality heat shrinking tubes are easier to stretch. The low-quality ones are made with the kinda shiny material/plastic. The better quality tubes are matt (they look and feel similar to the new Apple cords). The high-quality tubes are more expensive, and hard to find, but worth it! There are also tubing with adhesive (more expensive than regular). In the description of this video, you'll find more information. Good luck my friend and let me know how it goes!
Give it a chance. Try heat shrinking tubing. It looks way much better than electrical tape. No sticky cord or unsticking tape after a couple of weeks after repair. Tested and confirmed!
Yeah, that's what I did. Black tape on a white cord. My phone cord is fine but my Apple computer cord did this in several places. My son ordered me a new one but until then. I used tape.
If the wireitself is broken can I just butt splice it ?
7 лет назад+1
It's highly recommended to cover the open wire in any electrical devices. You may use shrinking tube or electrical tape to prevent yourself from electrical shock or buy new USB/Lightning plug.
if the cable no needs soldering just use heat shrinking tube as it is shown in this video. If the cable needs soldering, and if you don't have that kind of skill than you need to go to a local electrician service or buy a new one (if the cost of repair is higher than brand new charger unit).
On the one I fixed the wire braid had unraveled a bit. I twisted it gently until I found the right position for it to sit like it was supposed to. Then I would recommend using some electrical tape to hold in securely, then put the heat shrink on right over top. I actually didn't bother with the electrical tape as I couldn't find where mine was at the time! Seems to be fine so far =)
Expensive azz cords just piss me off 😐 I wanna fix mine after seeing how easy the repair is but I don’t have that tube u used
6 лет назад+3
Buy online. Google for: shrinking tube, heat shrink tube or heat-shrink tubing. You'll find some link to online stores or direct sales. Buy shrinking tube in diameter of 4,8 mm shrinking to 2,8 mm. It's important. Good luck, and let me know how it goes.
Cezary Lopacinski Gr8 video. Thanks a lot! Could u maybe post a link to the correct type please? I keep finding these 2:1 ration 6mm or 10mm...don’t see any 4,8mm or any type of units even similar.
6 лет назад+1
I don't know where you are living. US, Europe? Africa? Shipping may be a problem... If you got problems with online research, try to your local electrical store. Or use "white shrinking tube 4.8 mm" as a search phrase, just Google it. There's a lot of search results such as Amazon or eBay links.
Idk what a soldering is but thx man, I asked my bud and he fixed but can you plz make a video on how still so I can always know how to repair a porshly chewed wire
apple cannot update it in online. Otherwise ofcourse they will solv this in next updation.
5 лет назад
I'll defence Apple. “It's only those who do nothing that make no mistakes, I suppose.” Joseph Conrad. Everybody can make a mistake or mistakes, but the problem is when those mistake or mistakes are repeated all the time. That's why I won't defence Apple. It's a love-hate relationship in my case.
I've tested fire from lighter and tealight. Both sources of heat made white shrinking tube blackened (if the fire was to close to tubing) or yellowish (after a couple of days after repair). Using hot air from a hairdryer or heat gun, the is no such things as yellowish tint or smoked layer on to the shrinking tube. I prefer hot air because it gave the best result when we talking about good looking repair as it possible.
Ok Mate, I have an Honest question & Please don’t laugh @ me, What type of Heat Shrink tubbing Do you Use, I have a bunch of Car Related Heat tube, But it’s Either 2 Small or to Big, my Cables for my Daughters Tables are Black, So I don’t wanna use White, All three are young & Will Complain, Thats Y I Divorced there How Mum
5 лет назад+1
I used in this video regular cheap heat shrinking tubing, but there is also available tubing with adhesive (highly recommended for that kind of repairs). Take a look at this link (affiliated, if you wanna to support the channel): amzn.to/2RwnC27 It's black and in the proper size. Hope it will help and let me know how it goes/went!
Where do you get the shrinking tube. Link? Thanks.
5 лет назад+1
I bought it in a local hardware store (electrical department). Just google "heat shrinking tube 4.8 mm shrinking to 2.8 mm" or visit a hardware store in your neighborhood. There are two different types of tubes, low and high quality. The high-quality heat shrinking tubes are easier to stretch. The low-quality ones are made with the kinda shiny material/plastic. The better quality tubes are matt (they look and feel similar to the new Apple cords). The high-quality tubes are more expensive, and hard to find, but worth it! Let me know how it goes!
Where can you find that covering material in market
5 лет назад+2
Google for: shrinking tube, heat shrink tube or heat-shrink tubing. You'll find some link to online stores or direct sales in Google. Buy shrinking tube (2:1) in diameter of 4.8 mm (up to 6.4 mm) shrinking to 2.8 mm (up to 3.2 mm) It's important. I bought tubing it in a local hardware store (electrical department). There are two different types of tubes, low and high quality. The high-quality heat shrinking tubes are easier to stretch. The low-quality ones are made with the kinda shiny material/plastic. The better quality tubes are matt (they look and feel similar to the new Apple cords). The high-quality tubes are more expensive, and hard to find, but worth it! There are also tubing with adhesive (more expensive than regular). I got many questions about a link to a shrinking tube so you may support the channel by buying it from affiliate link: US: amzn.to/2VA8dNw UK: amzn.to/2DFNyR4 DE: amzn.to/2DdA7Hj Good luck my friend and let me know how it goes!
Cezary Lopacinski Cezary Lopacinski yes I gone through that link that you mentioned ..but the item is not delivered to India .so kindly get the link of that item which will found in India
5 лет назад+1
@@sairamanaeswarachandmiriyala Search on Amazon India for: "6mm Clear/Transparent Polyolefin Heat Shrink-Tube Sleeve" or "Polyolefin Heat Shrink-Tube Sleeve, 6mm(Red, Blue, Green)". Both tubes, transparent or in colors cost around 150-200 Indian rupee. The white tubing in a small amount is unavailable. Hope it helps.
how do I fix my charger with electrical tape? Thank you!
6 лет назад+1
Use heat shrinking tube. After a couple of weeks or months, shrinking tube looks way better than electrical tape. If you don't have tubing, just wrap around electrical tape over the damaged part of the cord. If the cord is permanently broken, buy new one.
If it is possible to repair I'll prefer to repair instead of throwing stuff to trash. Less electro trash = better future for the next generations. Think about it in this perspective.
There is a bunch of stupid or ignorant people out there who does NOT understand how to repair things. Yes, it is easy to just buy a new one, but why if it is a simple repair? Oh, forgot were in the age of millennials.
6 лет назад
Everybody has the right to have their own opinion.
Main issue: that cables haven't made to be last. That insulation fix is just a cosmetic makeup, not a solution. Wire (or should I say "reinforced foil"?) connectivity is a next malfunction anyway.
6 лет назад
After this cosmetic makeup cable still looks good and the charger work pretty fine after over one year. When the connectivity will fail, I'll report in under this comment.
6 лет назад
It's not about the millennials. It's all about the environment. *Less electro trash = better future for the next generations.*
I don't understand your language. Try to write a comment in English. I'll be happy to talk about your opinion.
5 лет назад
Try to use heat shrinking tube, it looks way much better than electrical tape. No sticky cord or unsticking tape. Tested! Still looks and work pretty fine after over one year.
Cezary Lopacinski, Google Translate тебе в помощь! Не будь ограниченным.
5 лет назад
@@ПутинХуйлоо Besides the fact that Google Translate can do something wrong... If you are a visitor to someone, then adapt to its rules. That's what well-mannered people do.
Get an Android. Charging cables are cheaper and universal between Samsung,LG,HTC, etc. And work with A BUNCH of other devices. Like cameras and battery packs.
Nice way to troll everyone... this only works if the wires aren't buggard and 99% of the time they certainly are. Now if we were to go on amazon and buy some shrink tubing for 5$ and do this BEFORE it breaks I think we all would be good.👍 Edit: are - aren't
Я ровно такое же проделал со своим проводом для iPad 2 ножницы вилки ложки И так далее в ход пошли!
5 лет назад
I'll be happy to answer the question or talk about your opinion if only I understand what you are trying to say. I don't understand your language. Try to write a comment in English. Also, other people from the community will benefit from it. Thank you.
I did this repair in half the time of the video. This does not work. The cable will shred at the other end of the shrink tubing.
5 лет назад
It's important to cut a little bit more white plastic cover from the cable in damaged place to prevent from further cracking. In 1:58 and 2:25 I'm showing why the cut is very important. In 3:06 I'm cutting a small amount of the white plastic cable to make some distance between both parts of the damaged cable. After over one year mine and my friends repaired cables, looks and works pretty fine.
i wonder why these cable so expensive,they r not suppose to b!!!
3 года назад
The quality of those cables is within the budget range. The price is premium. The problem was, that Apple for years does nothing about it. They developed a new cable, but the new price is insane. What we can do about it? Maybe repairing old ones or buying third party accessories, at least IMO
Best to buy iphone usb cable in Amazon basics than repairing iphone old cable
5 лет назад+1
Yes, it's the simplest way to repair iPhone cable. Buy a new one and throw the old one in a trash bin. But... Think global... Less electro trash = better future for the next generations. Think about this simple repair in this perspective.
I think Apple knows there's something wrong with the lightning cable I sent mine in because of the charging problem using the cable that came with the iPad bought from Costco brand new and they said my iPad has some scratches and blamed that it was because of the scratches on my iPad What! How can the lightning cable and charging problem has to do with the minor scratches on my iPad lol.. 🤬
@ Yeah, I can show you the letter! I still have the letter printed by the authorized Apple repair center in my car!! 😂🤣 I think I should keep it as an evidence (:
3 года назад
@@0animalproductworld558 also put it in a frame and hang it on the wall 😂
I needed this in my life! Thanks mate!
You're welcome!!! I'm happy that this video is helpful for you.
@Pramod Mutha for sure 🤫
help! I am buying my 4th charger in a week and I am going to get shouted at if I tell them it doesn’t work AGAIN! I cleaned all the lint and mess in both iPad and wire. The wire looks clean and there was no mess in in whatsoever. I cleaned all the plugs. I plugged it in, still, DOEST WORO! Somebody HELP PLEASEEE! When I buy new chargers they work and then all of a sudden they stop working! I’m so tired of this..
What is the name of the tubing you are using why you don’t speak do you have anything in your mouth
Shrinking tube.....
Why to fix , if everybody has same problem, it means there is a mistake in these cables Apple produces, I am a big Apple fan but I bought more than 20 cables for my 2 iPhones in the last 5 years
I'm an Apple user since 2006 and I'm so disappointed in some areas of Apple quality. For instance, this cable issue... Buying a new one and throwing the old one in a trash bin is the simplest way. The 3-foot wire is not a big problem in a one trash bin, but if You multiply this X times... That's why repairing things if it's possible is so important. Less electro trash = better future for the next generations. Apple is so worried about the environment, so why are they selling such a garbage? It made me sad and angry!
😁😁😁😁 not only you.
apple, one of the most reputed company is producing such a worse cable.😀😀😀😡🤬🤬
Feeling shame in front of others some time. but nobody will agree with me because they are satisfied with this limited facility phone with high reputation 😏
Praise apple more. The will give something in future😋😋
I agree with your opinion in 100% but this doesn't change the situation (unhappy).
I agree
LONG NEEDLE NOSE PLIERS work the BEST! Insert the head of the pliers into the tube and then open the pliers. The handles of the pliers give you the leverage and control you need to stretch the tube without breaking/tearing. I can stretch a tube in about 30 secs with the needle nose pliers versus other methods.
Long needle nose pliers do the job. This video is DIYish as possible ;)
Im at 1% battery life this best work or u getting a invitation to my funeral
Lol
I didn't get the invitation so I assume, everything is ok ;)
@ id think the opposite as he can’t message you it xD
This works. I did this a while back and it last for another 6 months then it finally stopped working.
I'm so sad to hear that your USB cable lasts in good condition for only 6 months. Mine works since I recorded this video. Use this method with a new one. It should protect the new cable.
The scissor stretching technique was what I needed. Almost gave up on trying to fix the cable with heat shrinking tube, until I saw this video. Thanks a lot, mate!
Great to hear that my friend!
Pick up some heat shrink tubing that has an ID of between 6 and 6.5mm. Look for a shrink ratio of at least 3:1. 4:1 if you can find it. That will eliminate the need to stretch smaller ID 2:1 tubing. It will make for a simpler, and better repair.
It's a great idea!
Thank you for the advice!
That's very useful advice. Thanks
Personally, I think a better repair would include shrinking the tubing over the molded plastic part of the plug to help reinforce the entire cable and limit flexing at the weak point. I just did this and it virtually eliminated the flexing. I used a small diameter heat shrink tube and used the scissors to expand the tube so that I could get it over plug.
Good point. Thank you!
This could've been done in about 15 seconds... instead we looked at the broken damn cord for 45 seconds... 🤦🏻♂️
“Train yourself to let go of everything you fear to lose.” Yoda
I let my brother use my charger now I am here 😂
Glad I could help! 😂
Be very careful when heating the shrinking tube because the plug will deform when being heated to the same temperature as the tube, it will deform and crack and not look nice anymore.
Yes, it's possible.
So, you really didn’t know what you were doing, did you? Just figured it out as you made the video which made it twice as long as it needed to be.
This is how to Speeding Up RUclips Videos:
1. Click on the Settings icon. Find the drop-down box that indicates Speed. Click on Speed.
3. Scroll to your preferred speed, such as 1.25, 1.5 or 2 times the normal speed.
4. Click “Play.”
The video will play at a faster rate 🤓
This solution will only work for replacing the damaged insulation, if the wires are damaged it won’t do anything
True. Insulation, not connectivity.
I was going to say the same thing. Is there a solution for damaged wires?
Tasneem Mountaj if the break is further down the wire, you can solder the wires together but if it’s close to the plastic connector part you will need to cut into the plastic carefully and desolder the wires from the pcb then solder the wires back onto the pcb and insulate the whole thing with heat shrink and hot glue. A lot of work so if that’s the case you’re better off buying another cable and ensure that you only buy an apple or apple verified one because most offbrand ones will not work and a pop up will show on ur screen saying the cable is not apple verified, even if it works at first, after you update your iOS then the cable might not work anymore.
@@P2BS97 the time and cost of repairing fully damaged wire in most cases are unprofitable. If you need to repair broken connectivity you need to use a soldering iron.
flightworks explained this process. Hope it was helpful.
Let us know how the repair goes.
@@P2BS97 buy a new cable.
Thx for the demonstration
You are welcome my friend 👍
help! I am buying my 4th charger in a week and I am going to get shouted at if I tell them it doesn’t work AGAIN! I cleaned all the lint and mess in both iPad and wire. The wire looks clean and there was no mess in in whatsoever. I cleaned all the plugs. I plugged it in, still, DOEST WORO! Somebody HELP PLEASEEE! When I buy new chargers they work and then all of a sudden they stop working! I’m so tired of this.
Consult this issue with apple support. It may be a problem with iPad not a charger
Oh it works perfectly fine now :)
You see, I have this charger which is like a Samsung charger with a part of the iPhone bit and the Samsung part never worked so that’s what made it ‘broken’
Just wrap some electric isolation tape (made for it) around it. Quick, safe and cheap !
Try to use heat shrinking tube, it looks way much better than electrical tape. No sticky cord or unsticking tape. Tested! Still looks and work pretty fine after over one year.
Mine didnt work 😭😭😤
The rubber tube comes with in ball pen wil it work?
It won't work, use heat shrinking tube or electrical tape.
Cezary Lopacinski we just need to stick the insulation tape or the so called electrical tape? Or should we also use hair dryer on the insulation tape???
Sry if this question is ignorant or stupid.. I have never worked with these b4 that’s y
TIA
If you using electrical tape for this repair, you don't need to use a hairdryer. Hot air is necessary for heat shrinking tubing.
What if the inner copper wire has been ruptured
Use a soldering iron or go to a local service electronic shop or buy a new USB cable
This is what I'm looking for badly...
I hope the cable will work fine and long time after repair.
would I sound dumb if I said I got another charger to see if this work to do it on my broken charger???
If it works for you.
Would be nice if you included a list of material in the description. Such as the size of the shrink tubing.
Have you read the description? There is a information about the size of the shrinking tubing.
For some reason the description was not visible on the iPad where I first saw this.
Thanks.
Yesterday I discovered similar errors on the iPhone.
There are two different types of tubes, low and high quality. The high-quality heat shrinking tubes are easier to stretch. The low-quality ones are made with the kinda shiny material/plastic. The better quality tubes are matt (they look and feel similar to the new Apple cords). The high-quality tubes are more expensive, and hard to find, but worth it! Let me know how it goes!
thanks for teaching
i also fixed my torn xiaomi piston in ear
Thank you! Great to hear that!
Dear sir . I’m shawn , thank you for show us this video n I have 2 iPhone cable happen that ways.
Where can I find that kind of plastic tube? And what it’s call for the term name that plastic tube?
😊👍👍
Search for "the heat shrinking tube", you can find it online or in a local hardware store (electrical department). There are two different types of tubes, low and high quality. The low-quality ones are made with the kinda shiny material/plastic. The better quality tubes are matt (they look and feel similar to the new Apple cords). The high-quality tubes are more expensive, and hard to find, but worth it! The high-quality heat shrinking tubes are easier to stretch.
Thank you for the comment and let me know how it goes! 😀👍👍
Good idea but self fusing silicon rubber electrical tape is easier and faster.
Yes, good point. The self-fusing silicon rubber electrical tape is easier and faster and way much better than regular electrical tape but doesn't look good as a heat shrinking tube. At least in my opinion. In this video, it's all about the good-looking effect. It's a hard way but looks more esthetic.
Mine is broken i I already broke 1 so it my dad finds out he is gonna kill me thanks so much this really saved me from getting my butt kicked😂
I'm glad to hear that 😁
thank you Cezary
It was pleasure @NNED16
i have a question? What is that tube? U were using?
It's a regular heat shrinking tube without adhesive. In the description, there are some links to the Amazon pages. Those link will guide you to specific tubing. Hope it helps. Let me know how it went.
Thanks for your time and share. Very useful if you don't have any chance to buy another one.
It's good learn how to fix it. It's good to develop your abilities.
Thank you.
I'm happy that this video was helpful. Let me know how it goes/went!
How long does this last on a headset?
Didn't test it on the headset, just on a USB to Lightning iPhone charger cable. After two years looks fine.
Гениально, ничего не скажешь. Только вот не одну лишь "яблочную" технику так "чинить " можно. Любые кабели, у которых оболочка лопнула, а жилы целые. Главное ТУТик найти нужный
I don't understandthe Russian language. Try to write the comment in English. I'll be happy to answer your question.
Thanks for sharing. Why can't Apple strengtened that fraying prompt section. A simple survey will let them know how to do product improvement.
I fixed mine by electrical tape.
I believe they know what they doing. It's all about the money, sadly.
I'm Mac user since 2006 and my old, very first White MacBook's (still working day by day just for emails and RUclips) charger is in good condition. My MagSafe 2 from 2012 and all iPhone's cords after one year of usage are looks like garbage.
can you tell what you use than pointing them, i dont know what your pointing at
It's tubing size: diameter of 4.8 mm, shrinking to 2.8 mm
So... I’m not the only One who’s buying a new cable every 4 months??
You may change it. Just repair the fractured cable. It's relatively easy and way much cheaper than a new cable. Also, it's environmentally friendly
@ : How do I repair the cable?
Follow the step by step instructions in this video
Where can i find that thing i use??
Google for: shrinking tube, heat shrink tube or heat-shrink tubing. You'll find some links to online stores or direct sales in Google. Buy shrinking tube (2:1) in diameter of 4.8 mm shrinking to 2.8 mm. It's important. I bought tubing in a local hardware store (electrical department). There are two different types of tubes, low and high quality. The high-quality heat shrinking tubes are easier to stretch. The low-quality ones are made with the kinda shiny material/plastic. The better quality tubes are matt (they look and feel similar to the new Apple cords). The high-quality tubes are more expensive, and hard to find, but worth it! There are also tubing with adhesive (more expensive than regular).
In the description of this video, you'll find more information.
Good luck my friend and let me know how it goes!
puedes poner un video como repara cable magsafe2 de macbook pro?
Yo no hablo español. Google Translate: Can you put a video like a repair cable MagSafe 2 from MacBook pro? You can watch a video here/Puedes ver el video aquí: ruclips.net/video/usHPsIX5fhs/видео.html
Its more time consuming, but the results are decent.
Any issues if you just wrap up with an insulating tape??
Try to use heat shrinking tube, it looks way much better than electrical tape. No sticky cord or unsticking tape. Tested! Still looks and work pretty fine after over one year. Try to achieve this result with electrical tape, in my opinion, it is impossible.
Did your charger already work beforehand because mine doesn’t work and it’s also breaking, so I’m not actually sure of mine will work just by covering broken part.
If it doesn't work, it's broken and the heat shrinking tube won't repair the MagSafe. Probably you need to replace the whole cable or solder the wire
Hi. Will adhesive lined shrinking tube ruin the exposed braided wire on my MacBook charger? I’m scared that the glue might go inside the wire.
Use regular non-adhesive tubing
Thank you! I had the idea to reinforce my iPhone cable with heat shrink but I couldn't figure out the sizes I needed! I didn't realize you could stretch it LOL.
Keep up the good work, ignore the haters. 😀
Shrinking tubes are great stuff...
Great to hear that...
That's the plan!
Help please , I bought my iPhone 11 just 7 months ago but my adapter stopped working suddenly so I bought a new adapter and after charging for a week it stopped working again . I used my USB cable in other chargers and it worked.what could be the reason my adapter gets spoiled all the time??can it be that I have a defective cable that burns the adapter?? Please help
There is a one-year limited warranty from the date of original retail purchase for Apple products. If the charger stopped working after 7 months just contact with Apple support and they will help you
Not all hair dryers are created equal. I had to use mine for so long to get the plastic to melt that it blew the electrical circuit and I lost
Power to an entire room.
Sad to hear that. The shrinking tube you pick was new?
Great video I used a plastic clear rap paper and also worked
Thank you.
Plastic clear wrap paper may be dangerous if the cord gets hot.
Consider using a heat shrinking tube or electrical tape.
Can’t you just use strong tape on it? It’s so much simpler.
The tape is much simpler in application but less esthetic overall. After a couple of days or weeks (depend on tape) repaired place get sticky. I've tested a couple different tapes. The heat shrinking tube repair is more time consuming but looks and works way better than tape. In my opinion, of course.
Cezary Lopacinski i have had three different pieces of tape on mine and it just keeps falling off eventually....
🤣😂😅
What size of that shrinking to do I have to use?
Buy shrinking tube (2:1) in diameter of 4.8 mm (up to 6.4 mm) shrinking to 2.8 mm (up to 3.2 mm) or (3:1) up to 9 mm. It's important. There are two different types of tubes, low and high quality. The high-quality heat shrinking tubes are easier to stretch. The low-quality ones are made with shiny material/plastic. The better quality tubes are matt (they look and feel similar to the new Apple cords). The high-quality tubes are more expensive, and hard to find, but worth it! There is also tubing with adhesive (more expensive than regular). 3:1 tubes are more expensive than 2:1.
In the description of this video, you'll find more information.
Good luck my friend and let me know how it goes!
You guys r lucky my charger all wires are the here and there and it's impossible to fix
Not good. Buy a new one.
by the Way Music Good Booster
Sounds good to me 😎
Doesn’t help one bit. What if it’s cutting out because the wire is frayed?
Consider to:
A. use a soldering iron and heat shrinking tube
B. buy a new cable
Thanks m8, welp now Ik you can stretch tubing. I cut my cable and fixed it tho lol because it wasn't just the cable that was broken.
Well done my friend!
My charge is 2% and my charge's red line is cut off any tips for it to work?i
Buy new unit.
I just put a regular piece of tape over mine until my replacement comes from amazon in 2 days. Hopefully the tape doesn't hot I did not have electrical tape so will only charge when at home until my replacement comes. Not getting hot.Does this happen to a lot of people?
This is common issue for MacBook users.
Regular tape is not safe, cord may get fire because of this tape. Use electrical tape or avoid to use MagSafe with damaged cord. If You must use MagSafe be careful. Heat or electrical shock may be danger for your health or even life!
use liquid electrical tape then the heat shrink tubing if you want
Good point! The liquid electrical tape gives almost the same results as a heat shrinking tube. If you combine both methods in a proper way, it may give a great final look. But there is one kinda problem, the liquid electrical tape is more expensive than heat shrinking tube so the repair is going to be more expensive. It may be a problem for some reason. For me, it's not a problem. Thank you for the advice!
In which shop that shrinking tube was available.. Please tell me that
Google for: shrinking tube, heat shrink tube or heat-shrink tubing. You'll find some links to online stores or direct sales in Google. Buy shrinking tube (2:1) in diameter of 4.8 mm (up to 6.4 mm) shrinking to 2.8 mm (up to 3.2 mm) It's important. I bought tubing in a local hardware store (electrical department). There are two different types of tubes, low and high quality. The high-quality heat shrinking tubes are easier to stretch. The low-quality ones are made with the kinda shiny material/plastic. The better quality tubes are matt (they look and feel similar to the new Apple cords). The high-quality tubes are more expensive, and hard to find, but worth it! There are also tubing with adhesive (more expensive than regular).
In the description of this video, you'll find more information.
Good luck my friend and let me know how it goes!
Como se llama el tubo que usa para arreglar el cable? Donde lo puedo conseguir?
To jest tuba termokurczliwa. Poszukaj online pod hasłem: tuba termokurczliwa. Ja swoją kupiłem w lokalnym sklepie z elektroniką
Okay this works if the wrapper alone is torn right ? And we are adding a wrapper patch right ? Good work
*Thank you.*
Heat shrinking tube is working pretty fine.
After this simple repair, this cord is still working after over one year.
Cezary Lopacinski 👍
Lol a bit tape does it for me
Give it a chance. Try heat shrinking tubing. It looks way much better than electrical tape. No sticky cord or unsticking tape after a couple of weeks after repair. Tested and confirmed!
Yeah, that's what I did. Black tape on a white cord. My phone cord is fine but my Apple computer cord did this in several places. My son ordered me a new one but until then. I used tape.
What diameter ist the shrinking cable?
Use shrinking tube (2:1) in diameter of 4.8 mm (up to 6.4 mm) shrinking to 2.8 mm (up to 3.2 mm)
how do you repare the cable of earphones?
Use a smaller diameter of the tubing. The cable is 2 mm in diameter, so buy 4 mm 2:1 or 6 mm 3:1 tubing
If the wireitself is broken can I just butt splice it ?
It's highly recommended to cover the open wire in any electrical devices. You may use shrinking tube or electrical tape to prevent yourself from electrical shock or buy new USB/Lightning plug.
How do you fix if it’s bent
if the cable no needs soldering just use heat shrinking tube as it is shown in this video. If the cable needs soldering, and if you don't have that kind of skill than you need to go to a local electrician service or buy a new one (if the cost of repair is higher than brand new charger unit).
On the one I fixed the wire braid had unraveled a bit. I twisted it gently until I found the right position for it to sit like it was supposed to. Then I would recommend using some electrical tape to hold in securely, then put the heat shrink on right over top. I actually didn't bother with the electrical tape as I couldn't find where mine was at the time! Seems to be fine so far =)
some other tutorial insert pen spring in between two cables.
If the cord is fractured, I don't recommend putting a metal spring on it. It's not safe
Expensive azz cords just piss me off 😐 I wanna fix mine after seeing how easy the repair is but I don’t have that tube u used
Buy online. Google for: shrinking tube, heat shrink tube or heat-shrink tubing. You'll find some link to online stores or direct sales. Buy shrinking tube in diameter of 4,8 mm shrinking to 2,8 mm. It's important. Good luck, and let me know how it goes.
any hardware store
Cezary Lopacinski Gr8 video. Thanks a lot!
Could u maybe post a link to the correct type please? I keep finding these 2:1 ration 6mm or 10mm...don’t see any 4,8mm or any type of units even similar.
I don't know where you are living. US, Europe? Africa? Shipping may be a problem... If you got problems with online research, try to your local electrical store. Or use "white shrinking tube 4.8 mm" as a search phrase, just Google it. There's a lot of search results such as Amazon or eBay links.
Cezary Lopacinski oh, so it’s 4.8 not 4,8? Maybe that’s the problem. I’m in California, USA.
Too long! Why do you keep stroking the cable?
It's just a couple of minutes. I'm scrubbing cable with my fingers to get rid of the dirt. Its the simplest way to do it.
Cezary Lopacinski actually it's a pretty good demo. Where can i buy heat- shrinking tube ?
Buy online or go to the local hardware store and ask about heat shrinking tubing.
how do you fix a MacBookPro apple computer charger wire thats been chewed?
Probably you must use a soldering.
Idk what a soldering is but thx man, I asked my bud and he fixed but can you plz make a video on how still so I can always know how to repair a porshly chewed wire
I'll do it, but you must wait for couple days.
Thanks and that's fine take ya time
Not a repair just recovering
It depend...
Can you use rubber
What kind of a rubber?
apple cannot update it in online. Otherwise ofcourse they will solv this in next updation.
I'll defence Apple. “It's only those who do nothing that make no mistakes, I suppose.” Joseph Conrad. Everybody can make a mistake or mistakes, but the problem is when those mistake or mistakes are repeated all the time. That's why I won't defence Apple. It's a love-hate relationship in my case.
Lighter is best!
I've tested fire from lighter and tealight. Both sources of heat made white shrinking tube blackened (if the fire was to close to tubing) or yellowish (after a couple of days after repair). Using hot air from a hairdryer or heat gun, the is no such things as yellowish tint or smoked layer on to the shrinking tube. I prefer hot air because it gave the best result when we talking about good looking repair as it possible.
Oh..
Heat-shrink tubing in diameter of 4.8 mm shrinking to 2.4 mm
Ok Mate, I have an Honest question & Please don’t laugh @ me, What type of Heat Shrink tubbing Do you Use, I have a bunch of Car Related Heat tube, But it’s Either 2 Small or to Big, my Cables for my Daughters Tables are Black, So I don’t wanna use White, All three are young & Will Complain, Thats Y I Divorced there How Mum
I used in this video regular cheap heat shrinking tubing, but there is also available tubing with adhesive (highly recommended for that kind of repairs). Take a look at this link (affiliated, if you wanna to support the channel): amzn.to/2RwnC27 It's black and in the proper size. Hope it will help and let me know how it goes/went!
iPhone is name but charging cable quality destroy its value
Very bad quality cable very bad Iam so nervous
The Apple cables are garbage. Let's face it!
I hope they change it, someday...
did the same. used scissors to expand it too 😂
well done 👍
Where do you get the shrinking tube. Link? Thanks.
I bought it in a local hardware store (electrical department). Just google "heat shrinking tube 4.8 mm shrinking to 2.8 mm" or visit a hardware store in your neighborhood. There are two different types of tubes, low and high quality. The high-quality heat shrinking tubes are easier to stretch. The low-quality ones are made with the kinda shiny material/plastic. The better quality tubes are matt (they look and feel similar to the new Apple cords). The high-quality tubes are more expensive, and hard to find, but worth it! Let me know how it goes!
Where can you find that covering material in market
Google for: shrinking tube, heat shrink tube or heat-shrink tubing. You'll find some link to online stores or direct sales in Google. Buy shrinking tube (2:1) in diameter of 4.8 mm (up to 6.4 mm) shrinking to 2.8 mm (up to 3.2 mm) It's important. I bought tubing it in a local hardware store (electrical department). There are two different types of tubes, low and high quality. The high-quality heat shrinking tubes are easier to stretch. The low-quality ones are made with the kinda shiny material/plastic. The better quality tubes are matt (they look and feel similar to the new Apple cords). The high-quality tubes are more expensive, and hard to find, but worth it! There are also tubing with adhesive (more expensive than regular).
I got many questions about a link to a shrinking tube so you may support the channel by buying it from affiliate link:
US: amzn.to/2VA8dNw
UK: amzn.to/2DFNyR4
DE: amzn.to/2DdA7Hj
Good luck my friend and let me know how it goes!
Cezary Lopacinski Cezary Lopacinski yes I gone through that link that you mentioned ..but the item is not delivered to India .so kindly get the link of that item which will found in India
@@sairamanaeswarachandmiriyala Search on Amazon India for:
"6mm Clear/Transparent Polyolefin Heat Shrink-Tube Sleeve" or "Polyolefin Heat Shrink-Tube Sleeve, 6mm(Red, Blue, Green)". Both tubes, transparent or in colors cost around 150-200 Indian rupee.
The white tubing in a small amount is unavailable. Hope it helps.
how do I fix my charger with electrical tape? Thank you!
Use heat shrinking tube. After a couple of weeks or months, shrinking tube looks way better than electrical tape. If you don't have tubing, just wrap around electrical tape over the damaged part of the cord. If the cord is permanently broken, buy new one.
Thank you so much! I will go buy shrinking tube tomorrow. If I cannot find it though, do I also need to use heat to make the tape stay in place?
No. It's not necessary to use heat with electrical tape.
I used white duct tape and looks decent. Dunno if that’s recommended or not🤷🏼♂️
Holy crap. Just buy one.
If it is possible to repair I'll prefer to repair instead of throwing stuff to trash.
Less electro trash = better future for the next generations.
Think about it in this perspective.
Omg i have 0% and im on my dads phone and i have school in a few hours😭😭
Have you solved the problem?
No
And wasting the time for comment😂😁
Why the hell do they design these cords in a way where they have to get all kinked up just to plug them in? It makes no sense!
It makes no sense for users! But for salesman's it make sense. Economy. Just saying...
Nathan VanMiddlesworth Media money
good job
Thank you!
My charge is 2% and my charge's red line is cut off any tips for it to work?
Shrinking tube probably won't help you in this case.
What kind of tubing is this and where can I get it?
Drinking straws are made for cold drinks, not for electricity
repair work is actually done after 3:15. In stop motion video all can be shown in 15 secs.
Yes. It is possible to do it in 15 second.
What was the white thing?
Amit Mandal it’s a heat-shrink tubing (heat shrink or heatshrink).
@ Thanks.
@@amitmandal9074 You're welcome.
@ It's pleasure. Actually I'm from India.
@FURYtake a look at the video description section.
There is a bunch of stupid or ignorant people out there who does NOT understand how to repair things. Yes, it is easy to just buy a new one, but why if it is a simple repair? Oh, forgot were in the age of millennials.
Everybody has the right to have their own opinion.
Main issue: that cables haven't made to be last. That insulation fix is just a cosmetic makeup, not a solution. Wire (or should I say "reinforced foil"?) connectivity is a next malfunction anyway.
After this cosmetic makeup cable still looks good and the charger work pretty fine after over one year. When the connectivity will fail, I'll report in under this comment.
It's not about the millennials. It's all about the environment.
*Less electro trash = better future for the next generations.*
I admire his effort but electric tape would have been faster as long as no broken wires
The electric tape would have been faster but tubing looks way much esthetic. It's worth extra time ;)
Заморочился чувак! Изоленту попробуй)))
I don't understand your language. Try to write a comment in English. I'll be happy to talk about your opinion.
Try to use heat shrinking tube, it looks way much better than electrical tape. No sticky cord or unsticking tape. Tested! Still looks and work pretty fine after over one year.
Cezary Lopacinski, Google Translate тебе в помощь! Не будь ограниченным.
@@ПутинХуйлоо Besides the fact that Google Translate can do something wrong... If you are a visitor to someone, then adapt to its rules. That's what well-mannered people do.
ADRESS KAHA KA HE MUJE CABLE REPAIR KARVANA HE
Zajrzyj w opis do filmu. Znajdziesz tam wszystko
What if the wires inside are broken?
Consider to:
A. use a soldering iron and heat shrinking tube
B. buy a new cable
Get an Android. Charging cables are cheaper and universal between Samsung,LG,HTC, etc. And work with A BUNCH of other devices. Like cameras and battery packs.
Nice way to troll everyone... this only works if the wires aren't buggard and 99% of the time they certainly are.
Now if we were to go on amazon and buy some shrink tubing for 5$ and do this BEFORE it breaks I think we all would be good.👍
Edit: are - aren't
An ounce of prevention is worth a pound of cure
Я ровно такое же проделал со своим проводом для iPad 2 ножницы вилки ложки И так далее в ход пошли!
I'll be happy to answer the question or talk about your opinion if only I understand what you are trying to say.
I don't understand your language. Try to write a comment in English. Also, other people from the community will benefit from it. Thank you.
Me: Uses tons of tape on the wire
Me: Give a try to heat shrinking tubing 😁
I did this repair in half the time of the video. This does not work. The cable will shred at the other end of the shrink tubing.
It's important to cut a little bit more white plastic cover from the cable in damaged place to prevent from further cracking. In 1:58 and 2:25 I'm showing why the cut is very important. In 3:06 I'm cutting a small amount of the white plastic cable to make some distance between both parts of the damaged cable. After over one year mine and my friends repaired cables, looks and works pretty fine.
i wonder why these cable so expensive,they r not suppose to b!!!
The quality of those cables is within the budget range. The price is premium. The problem was, that Apple for years does nothing about it. They developed a new cable, but the new price is insane. What we can do about it? Maybe repairing old ones or buying third party accessories, at least IMO
what is the name of that cable?
Apple Lightning to USB Cable
Shrink tube
i did it with an electrical tape and it worked for a while until it didnt
Try shrinking tube, you will be happier than you can ever imagine ;)
Best to buy iphone usb cable in Amazon basics than repairing iphone old cable
Yes, it's the simplest way to repair iPhone cable. Buy a new one and throw the old one in a trash bin. But... Think global... Less electro trash = better future for the next generations. Think about this simple repair in this perspective.
I think Apple knows there's something wrong with the lightning cable
I sent mine in because of the charging problem using the cable that came with the iPad bought from Costco brand new and they said my iPad has some scratches and blamed that it was because of the scratches on my iPad
What! How can the lightning cable and charging problem has to do with the minor scratches on my iPad lol.. 🤬
What?!
@ Yeah, I can show you the letter! I still have the letter printed by the authorized Apple repair center in my car!! 😂🤣 I think I should keep it as an evidence (:
@@0animalproductworld558 also put it in a frame and hang it on the wall 😂
@ Haha that is a good advice! I was thinking of cleaning it and keep it until old age (: 🤣🤣😁
😢😢😢😩🙁☹️ I do not have the stuffs
Google for: heat shrinking tubing. You'll find plenty of tubing for this repair available in online stores with electrical supplies
nice
Thank you. Hope it's helpful.
Interestingly, but if Apple did not garb this waste, it would never have to be a video. The price for their cables is high.
100% agree! What can we do about it? At this moment probably nothing and this is sad but true.