I can’t be the only one of us loyal fans that wonders how in the absolute hell he ever gets those back together 😂 that’s gotta be even more impressive than watching him pick open even the most complex lock in under 5 mins!
LPL is a very meticulous picker and it is probably easier than it would seem to us mere mortals. Now, if he was to drop his tray, and didn't have a video to refer back to, that would be a challenge even for LPL !
@@walmartdog1142 Not really. You place the key pins in the plug and insert the key. If the pins aren't correct, you can tell. For the driver pins in the bible, it does require that you know where they go. But that's only the case when the driver pins aren't all the same (usually, they are).
For someone who knows nothing about lock picking and just watches these videos for the cool factor, seeing a tool like that was really nice because I felt like I was being taught how to pick rather than just shown how someone else does it.
Great tool! It seems like the springiness in the tool actually amplifies the "click", making it easier to see for viewers, and I can better visualize the amount of force you are applying to the pick compared to other videos. You might want to lock the white balance on the camera tho, colors changing wildly during pin inspection.
I think different springs shouldn't be a problem. Differing spring tension just helps resist raking/bumping. Unless you have a really really long driver pin and it requires a shorter spring so it doesn't get mangled in use.
Because of you and your channel I’ve purchased a locking pick set from banggood! It should arrive early next week! So glad your videos ended up in my recommendations!
Wow, that really made short work of a pretty tough lock. Makes sense that the distributor for it is in New York. High security locks like Mul-T-Locks and Medecos seem to be more common in NYC based on the number of locksmith shops I have seen advertising them in their windows. Presumably there is probably a demand among locksmiths to be able to pick such locks as well.
All I can say is I'm glad I haven't come across one of those locks yet.. The right tool in the right hands and you make it look so easy, nice one my friend ;-)
Considering we're getting more and more means to break these systems, i think it's a good decision that i have essentially turned my lock into a safe combination door. Mul-T-lock + geared rotor and a combination mechanism. Rotate left and right until the combinations are set and then open the doors. Feeling better about my paranoia.
As much as the key-shaped tensioner limits the pick's use depending on what attachments you have, it definitely looks like it'd solve all but the worst shaky-hand issues by keeping the pick centered. If I worked as a locksmith instead of picking as a hobby, I'd probably love such a specific tool. I treat locks like puzzles though, and a tool that's too good can make it harder to have fun.
I love how locksport has become a bit of an arms race. Lock companies started making locks that make standard picking nearly impossible, so lockpickers started making specialty picks to defeat them. It's the lock companies' turn to escalate the situation again.
I really want to see a collaboration between LockPickingLawyer and Steve1989MREInfo. The tone of the voice, way of presentation, signature phrases really hit the same vibe for me. "Alright, let's get this out onto a pinning tray. Darn nice!"
Well, that pick design deserves my bow-in-the-presence-of-the-royalty-or-heir. And CNC of that was quite 4-coordinate, at least. I _really adore_ of the author of that picking tool - even I'm not ever interested in picking locks IRL - but engineering was HATS OFF! My respects and abdication being somewhat of metalwork designing engineer.
Vladimir Looks like lathe, then regular router milling, with knurling before or after milling. The milling stage includes a threading step for set screws. The blades look like stamped or milled sheet stock.
You say the "Rotapik" made short work of the lock, when in fact it was _you_ who made short work of the lock. There's an old saying LPL... "You can have all the tools but you've got to have the know-how." That's it right there Boom!💥💨😲💨😀
There’s levels to this. There’s a guy on another lock picking channel that literally complained for 7 mins that this tool didn’t work on this lock. LPL did it in literally one min AND described pro n cons of the tool. There’s levels to this fellas be humble
I swear you sound exactly like my dentist when you are doing your lock picking thing. Except the only thing he is good at picking is the money out of my wallet.
@@anononomous That reminds me of the classic 1960s song, rolling in the wind. I love the lyrics. /How far can an anti-drilling ball bearing in a lock roll after the LockPickingLaywer guts the lock?/How far across the shop floor in the basement where locks go to die will it get? Will a strong gust of wind pick it up and blow it away? The answer my friend is blowing in the wind that is pushing the ball bearing along/
I am the head locksmith at Columbia University all we use is Mul-T-Lock interactive. This pick is made useless it would seem by the addition of side pins and/or back pins to the plug. I have every intention on getting this pick to try it out. In an institution picks are basically obsolete and everything is masterkeyed with no reason to pick for lockouts.
xBlueTornadox Well these are from a strong company, and I don't think this is advertised as their best model (they probably have a 6 pin version and almost certainly an electronically enhanced version).
That color shift at 4:44 really freaked me out! I was watching LPL on a new TV for the first time. I had to open the video on my phone to make sure it was the video and not my screen.
i'm still flummoxed as to how you pick the outer pin first and then the inner pin. with a handheld pick, i would imagine lateral variation, but with this one, locked into the keyway like it is, it seems like all you have is depth and rotational variation. the rotation variation with this kind of pick could allow you to select lateral position of the tip of the pick, but it seems like it'd sweep up the inner pin (or at least risk it. anyway, nice picking. i will add that i think your prior grey metal tray was easier to focus on than this one (probably due to shininess/reflections) - your more recent videos seem to be slightly off on focus when you zoom into a closeup of the pins. when you have something up close but in your fingers, the focus is great. thanks!
@@wonderofu8073 OK, here's one. ruclips.net/video/gsxnn9XTbfc/видео.html Better check this channel they have some more tools. Seems it's a French company that makes dimple picks and decoders.
@@wonderofu8073 Here's another strange one. Seems to be for car locks. The channel has more than one video on this. ruclips.net/video/hJaJRXpwIvs/видео.html
That is a good showing of how good LPL is. 15 minutes is a long time to be picking a lock. I am sure that was not under pressure as if trying to get into a home where the owner is paying you to open the lock because he dropped his keys while out.
To be fair, he said the picker he gave the tool to not only had never tackled a mul-t-lok, but had also never attempted a dimple core either. This man had zero experience with the base version OR the upgraded version and picked it in only 15 mins, first try. That honestly IS impressive.
A job well done and fully explained. May i ask is this for sale to the General public, in your country, and in England. Also the current cost. All your vids are exceptional well done, bill.
LTL. I do not know why I find your videos so captivating. Maybe I just enjoy learning stuff and you are really great at your tutorials. Your breakdowns. Your comedy. Please keep these videos coming I will watch every fucking video because I enjoy it no stupid intro no please subscribe hit the like button blah blah blah just Bare Bones content and it's good thank you
Unfortunately a good, solid kick is all it takes to open most residential doors. And if that doesn't work then a hammer will easily open most windows. Either way, common burglars don't pick locks.
I own a lot of mul-t-locks and while it’s probably more than overkill for my home and padlocks for general use, one can’t help but be disappointed by its security after seeing how fast LPL can pick it.
If you were impressed that novice could pick it in 15 minutes you're REALLY gonna be speechless when I pick it. It'll take me 15 years. Not to toot my own horn or anything 😎😎😎
I really love the idea of the people selling you locks also selling the means to disable the lock, do they furnish the addresses and lock types as well? Picking devices are highly Illegal here in Australia.
Your intro is perfect btw. The way you hit the same notes with the same words is as good as it gets. Did a professional tell you to do it that way or is it more natural talent?
It probably comes with his profession. When your job is to persuade people, speaking clearly, unambiguously and with a cadence that makes what you say stick in the minds of listeners is probably really helpful.
Small movements of the pick with very precise placement. Essentially he centers the pick on the pin to hit the inner pin, rests it on the edge of the pin to hit the outer pin.
@@roysammons2445 You'll notice when he's doing the outer pins, he's not on the markings, but offset a bit. He's right on the markings when doing the inner pins.
Is there a video where you describe your terms? Click, binding tightly, false set, etc. I'd love to know exactly what they mean and see what's happening when each occurs. Thanks!
I just got my first lock pick set yesterday because of your channel and I was wondering are you using the pick as a lever to lift the pins up, or are you rotating the pick to lift the pins up?
You lost a ball bearing from the lock? That is a very impressive lock. It was probably smaller than the balls that come in common ball bearings, so that was a very, very small ball bearing you lost. Ball bearings consist of several balls and two races. Often the balls are separated by means of a cage, although there are designs that don't need a cage. I suspect what you actually lost was a ball, similar to those that are often used in the construction of ball bearings.
Harry, why don't you make your own tool like you and Bill did with the disc detainer pick? Then you could do something about the rails on the pick. As well as shorten the length.
It was interesting seeing your lockpicking with the tool since it very clearly shows your movements (both the depth of your pick, and how you rotate it)
*I know it goes against everything most have ever been taught But deliberately doing a poor job of installing a deadbolt lock set so that it takes two hands to get in. One hand to turn the key and the other hand to lift or push or pull on the knob/door to eliminate the side load on the bolt. Since most lock picks are thin and rather easy to bend and can not be used to strong arm a bolt open such as a key would. and Adding dificulty since the lock picker is not familiar with the intricacy of the installation* *In other words , you don't want that dead bolt to be butter smooth. You want just a little bit of a wrestling match xD*
Blocked User the core will turn/pick before it retracts the bolt meaning you can pick he lock then remove the tool and use a flat screwdriver. Have done that a few times =]
GxAxV I see what you mean and you are right , once the core breaks free and starts to turn you slip in the screwdriver and play with the physics of the installation. I think it still adds a level of difficulty that makes it a little more involved and physical than just the pick. You need to keep tension on that screwdriver and not slip off while trying to figure out how to unload the tension on the bolt. Not as easy as some might think but it really is probably more common to see a sketch installation than a butter smooth one out on the street. Thanks for pointing that out.
![[1295] Unbreakable, Unpickable, & Bulletproof? (TED Tooling’s Unusual Lock)](http://i.ytimg.com/vi/DX1KaFmER2s/mqdefault.jpg)
![[1295] Unbreakable, Unpickable, & Bulletproof? (TED Tooling’s Unusual Lock)](/img/tr.png)
![[154] MUL-T-LOCK INTERACTIVE 252 | OBIJANJE | DADA PICK - WENDT (eng sub)](http://i.ytimg.com/vi/-_eREtiR3PY/mqdefault.jpg)
My favorite part is the specialty tools the craftsmanship and everything is something great to look at.
LPL now adding a sonic screwdriver to the arsenal
I bet he's wearing a giant scarf and we just can't see it
Probably a fez too!
That, sir, was quite intricate sarcasm. Thank you!
LOL
Does that mean Bosnian bill is the master?
15 minutes for a random person, 15 seconds for LPL. Haha.
He didn't win that championship for nothing.
15 seconds with no rush and while explaining the feedback he's getting every time. Wonder what he can do rushing it, no talking.
More like 15 hours!
Thanks to this channel i now have a successful used bike resale business
nice. have you found a good lawyer yet ?
I can’t be the only one of us loyal fans that wonders how in the absolute hell he ever gets those back together 😂 that’s gotta be even more impressive than watching him pick open even the most complex lock in under 5 mins!
He replays the video he recorded.
It's not that hard.
LPL is a very meticulous picker and it is probably easier than it would seem to us mere mortals. Now, if he was to drop his tray, and didn't have a video to refer back to, that would be a challenge even for LPL !
@@walmartdog1142 Not really. You place the key pins in the plug and insert the key. If the pins aren't correct, you can tell. For the driver pins in the bible, it does require that you know where they go. But that's only the case when the driver pins aren't all the same (usually, they are).
@@jimstand You mean he plays it backwards? :)
That light temperature shift at 4:38 was huge!
I was on my new TV, had to pause the video and watch for it on my phone!
I wonder if it's the WB of the camera or the temperature of the light that changed.
Well, considering it's Summer for me, I can't say I mind things cooling off every now and then.
I thought it was my phone for a sec there.
I had the thought "I don't remember dropping acid today" and had to back up to clear my head.
"Do Not Duplicate." I couldn't if I tried.
U’r not alone bro
Beat me to it
I sang that...
It's not meant for you! You can take it at a key maker to duplicate it! That's what it meant.
I have a key decoder if anyone is interested
For someone who knows nothing about lock picking and just watches these videos for the cool factor, seeing a tool like that was really nice because I felt like I was being taught how to pick rather than just shown how someone else does it.
Agreed! For the first time I could actually SEE the difference (in depth) from 1 vs 2 etc
Great tool! It seems like the springiness in the tool actually amplifies the "click", making it easier to see for viewers, and I can better visualize the amount of force you are applying to the pick compared to other videos. You might want to lock the white balance on the camera tho, colors changing wildly during pin inspection.
The sudden red filter made my eyes dizzy.
Some day I'd like to see "The springs should all be the same" *drops 5 different springs* "Shit"
I think different springs shouldn't be a problem. Differing spring tension just helps resist raking/bumping. Unless you have a really really long driver pin and it requires a shorter spring so it doesn't get mangled in use.
Well it happened I forget which one. It was recent and I think maybe an Abus? Not sure
I really liked how clearly I could hear every move and click while picking.
Any lock that requires a specially made machined tool to open, because standard picks and tensioners won't work is a great lock in my book.
Well, a normal tubular pick is still allowed.
@@namibjDerEchte it would be a dimple pock not a tubular pick
Doesn’t really require special tools they just make it easier
Finally a LPL video that is longer than a BosnianBill video on the same day!
I love this pick. It lets us really see how LPL manipulates the pick. Seeing the dot move back and forth is so awesome.
LPL always impresses me with his skill. He really does make it look easy. Deceptively easy.
Because of you and your channel I’ve purchased a locking pick set from banggood! It should arrive early next week! So glad your videos ended up in my recommendations!
This tool is made by Vetal R. He is a very good toolmaker, especially for dimple/pin-in-pin locks.
Hi there, do you have a buy link?
Wow, that really made short work of a pretty tough lock. Makes sense that the distributor for it is in New York. High security locks like Mul-T-Locks and Medecos seem to be more common in NYC based on the number of locksmith shops I have seen advertising them in their windows. Presumably there is probably a demand among locksmiths to be able to pick such locks as well.
Very neat tool. Its ability to function doesnt make me think that it's witchcraft, so good
All I can say is I'm glad I haven't come across one of those locks yet..
The right tool in the right hands and you make it look so easy, nice one my friend ;-)
"that was pretty darn fast" … gee, you never do get used to the swearing from lockpickers. 😁
What an impressive tool. The design's that have been coming out for lockpicking tools are all pretty impressive lately.
Considering we're getting more and more means to break these systems, i think it's a good decision that i have essentially turned my lock into a safe combination door.
Mul-T-lock + geared rotor and a combination mechanism. Rotate left and right until the combinations are set and then open the doors.
Feeling better about my paranoia.
I think it would have been a good comparison to see how long it would have taken you to pick it using normal methods vs the rotor pick.
My money is on it taking longer with the tool, lol
So that's why he didn't do it.
@@tomasgoes ehh that would be a reason TO do it actually
Very impressed! You're a very knowledgeable lock picker! 👍
As much as the key-shaped tensioner limits the pick's use depending on what attachments you have, it definitely looks like it'd solve all but the worst shaky-hand issues by keeping the pick centered. If I worked as a locksmith instead of picking as a hobby, I'd probably love such a specific tool. I treat locks like puzzles though, and a tool that's too good can make it harder to have fun.
LPL's son's first Xmas gift was a lock picking set! 🤣
"And a wittle cwick outa fwree..."
So cute
I love how locksport has become a bit of an arms race. Lock companies started making locks that make standard picking nearly impossible, so lockpickers started making specialty picks to defeat them. It's the lock companies' turn to escalate the situation again.
Nice pick!
I really want to see a collaboration between
LockPickingLawyer and Steve1989MREInfo. The tone of the voice, way of presentation, signature phrases really hit the same vibe for me.
"Alright, let's get this out onto a pinning tray. Darn nice!"
Should he pick his meals too? 😂
Well, that pick design deserves my bow-in-the-presence-of-the-royalty-or-heir. And CNC of that was quite 4-coordinate, at least. I _really adore_ of the author of that picking tool - even I'm not ever interested in picking locks IRL - but engineering was HATS OFF! My respects and abdication being somewhat of metalwork designing engineer.
Vladimir Looks like lathe, then regular router milling, with knurling before or after milling. The milling stage includes a threading step for set screws. The blades look like stamped or milled sheet stock.
Much of what the LPL said went over my head, but still very interesting and informative.
Just picked my first assoy lock with a nasty keyway :) great vids learning a lot. Keep up the good work!
You say the "Rotapik" made short work of the lock, when in fact it was _you_ who made short work of the lock. There's an old saying LPL...
"You can have all the tools but you've got to have the know-how."
That's it right there Boom!💥💨😲💨😀
I want a timelapse of you putting the locks back together at the very end if you can, it is very nice to see, thank you.
There’s levels to this. There’s a guy on another lock picking channel that literally complained for 7 mins that this tool didn’t work on this lock. LPL did it in literally one min AND described pro n cons of the tool. There’s levels to this fellas be humble
I swear you sound exactly like my dentist when you are doing your lock picking thing. Except the only thing he is good at picking is the money out of my wallet.
We have these locks on my building in New York City. Main entrance door & each apartment. At least they’re better than most.
Dude there’s no way in hell anyone but an expert is getting into one of these beasts.
Have you found the ball bearing?
It's probably still rolling.
@@anononomous That reminds me of the classic 1960s song, rolling in the wind.
I love the lyrics. /How far can an anti-drilling ball bearing in a lock roll after the LockPickingLaywer guts the lock?/How far across the shop floor in the basement where locks go to die will it get? Will a strong gust of wind pick it up and blow it away? The answer my friend is blowing in the wind that is pushing the ball bearing along/
the year 2075 called, they said that ball bearing is still rolling.
This is where a magnet comes in handy.
James dean.
Yes! I was hoping you would do Mul-T-Lock. But, I did not see anything having to do with the floating disk that's beside the row of milled dimples.
lining up with the pins, the click when a pin gets set... Very satisfying seeing that pick in action.
I am the head locksmith at Columbia University all we use is Mul-T-Lock interactive. This pick is made useless it would seem by the addition of side pins and/or back pins to the plug. I have every intention on getting this pick to try it out. In an institution picks are basically obsolete and everything is masterkeyed with no reason to pick for lockouts.
Lockpickinglawyer posts video:
Companies stocks dropped by 50%
stinks
At least for higher quality locks, they just make better locks.
For lower quality locks the buyers don't care.
xBlueTornadox Well these are from a strong company, and I don't think this is advertised as their best model (they probably have a 6 pin version and almost certainly an electronically enhanced version).
The multlock cliq is the new gold standard. Good luck manipulating that
Mul-T-Lock is very good and hard to pick,it looks easy but it’s not,you can upgrade customers locks to Classic Pro or MT5 +
Seriously that pinning tray! Awesome
That color shift at 4:44 really freaked me out! I was watching LPL on a new TV for the first time. I had to open the video on my phone to make sure it was the video and not my screen.
i'm still flummoxed as to how you pick the outer pin first and then the inner pin. with a handheld pick, i would imagine lateral variation, but with this one, locked into the keyway like it is, it seems like all you have is depth and rotational variation. the rotation variation with this kind of pick could allow you to select lateral position of the tip of the pick, but it seems like it'd sweep up the inner pin (or at least risk it.
anyway, nice picking. i will add that i think your prior grey metal tray was easier to focus on than this one (probably due to shininess/reflections) - your more recent videos seem to be slightly off on focus when you zoom into a closeup of the pins. when you have something up close but in your fingers, the focus is great.
thanks!
Wow! That was cool. Awesome pick with that tool!
Great job picking brother as always and thanks for sharing it with us
love it! well done to the man from Brooklyn. thank you for the video.
Last time I was at NYC, I saw a lot of Mul-T-Locks.
That tool has been out for a while. The Chinese have a video about it on YT. Of course it's not in English but you can't have everything.
Can you provide a link, sir? :)
@@wonderofu8073 Not at the moment, been a while since I last watched it. But you should be able to search for it.
@@wonderofu8073 OK, here's one. ruclips.net/video/gsxnn9XTbfc/видео.html Better check this channel they have some more tools. Seems it's a French company that makes dimple picks and decoders.
@@wonderofu8073 Here's another strange one. Seems to be for car locks. The channel has more than one video on this.
ruclips.net/video/hJaJRXpwIvs/видео.html
It’s for 7x7 not pin in pin,we actually have 3 in 1 that does both
Definitely an impressive piece of kit !
Such a precision instrument!
That is a good showing of how good LPL is. 15 minutes is a long time to be picking a lock. I am sure that was not under pressure as if trying to get into a home where the owner is paying you to open the lock because he dropped his keys while out.
That's an impressive pick and your skill with it amazes me.
"He picked the lock in 15 minutes, which is far more impressive than anything I did with it" he says before picking the lock in just under 1 minute
To be fair, he said the picker he gave the tool to not only had never tackled a mul-t-lok, but had also never attempted a dimple core either. This man had zero experience with the base version OR the upgraded version and picked it in only 15 mins, first try. That honestly IS impressive.
It's amazing that you can open this complex lock.
Great tool and great explanation.
ive never even locked a door or turned a key before but i love your videos
Nice work, I was just looking at that tool 2 days ago. seems like a pretty cool thing to have
so much for extra piece of mind on my new $100 dollar lock set
LPL: "...helps make the most of your existing packing skills."
Me: dear God, he'll be unstoppable
A job well done and fully explained. May i ask is this for sale to the General public, in your country, and in England. Also the current cost. All your vids are exceptional well done, bill.
"Im the lockpicking lawyer and today im going to show you how to open a lock on an SCP containment unit"
Plot twist: the unit is his.
LTL. I do not know why I find your videos so captivating. Maybe I just enjoy learning stuff and you are really great at your tutorials. Your breakdowns. Your comedy. Please keep these videos coming I will watch every fucking video because I enjoy it no stupid intro no please subscribe hit the like button blah blah blah just Bare Bones content and it's good thank you
Thankfully the chances of the local thieves having one of those tools is minimal. Nice pick.
Unfortunately a good, solid kick is all it takes to open most residential doors. And if that doesn't work then a hammer will easily open most windows.
Either way, common burglars don't pick locks.
@@youdoitillwatch windows. Especially unlocked ones.
Their slogan should be “so easy, it’ll make you feel dirty” cause you opened that lock so fast
I own a lot of mul-t-locks and while it’s probably more than overkill for my home and padlocks for general use, one can’t help but be disappointed by its security after seeing how fast LPL can pick it.
Thas tool need something on the detaining screw and that tool is amazing you opened that faster than I seen you open up any other multilock
Fun fact: In Israel these types of locks are almost exclusively used
If you were impressed that novice could pick it in 15 minutes you're REALLY gonna be speechless when I pick it. It'll take me 15 years. Not to toot my own horn or anything 😎😎😎
I really love the idea of the people selling you locks also selling the means to disable the lock, do they furnish the addresses and lock types as well? Picking devices are highly Illegal here in Australia.
Pretty impressive lock.
😎Only you would have a cut away ..Great FANTASTIC VIDEO great close up video buddy well explained can't say enough about this video. 🌟⭐🌟⭐🌟😎
SUNCOAST PICKER the cutway lock was made by Vitaly Rotor
Your intro is perfect btw. The way you hit the same notes with the same words is as good as it gets. Did a professional tell you to do it that way or is it more natural talent?
It probably comes with his profession. When your job is to persuade people, speaking clearly, unambiguously and with a cadence that makes what you say stick in the minds of listeners is probably really helpful.
This channel made me realize how many people there are like me who are masters at opening locks.
Very useful tool and wonder how many locks the extra blades would cover or is it for MulTLocks only?
Great video
Just Mult-Locks I think.
06 05 08 264 interactive + and all the other knockoff .Does everything besides MT5
No it can fit many other dimple locks(or at least the one I have does) have a look at my videos to see it open other locks.
Probably in UK in USA we don’t have other keyways
@@GxAxV , I've only heard of them so thanks.
i think he is either a locksmith or a lawyer
I didn't understand how you made it manipulate outer and inner pins. Otherwise very impressive.
Small movements of the pick with very precise placement. Essentially he centers the pick on the pin to hit the inner pin, rests it on the edge of the pin to hit the outer pin.
Thordan: Thanks!
I had the exact same thought. There is only one marking for each of the pins so how to judge under and outer pins 🤔
@@packered thanks for explaining that.
@@roysammons2445 You'll notice when he's doing the outer pins, he's not on the markings, but offset a bit. He's right on the markings when doing the inner pins.
I need this man on my heist team!!!
LPL could narrate probably anything mechanical or technical related.
Is there a video where you describe your terms? Click, binding tightly, false set, etc. I'd love to know exactly what they mean and see what's happening when each occurs. Thanks!
That rotor pick looks amazing! Without the tool how much longer would it have taken?
Look at his many multilock vids. I just watched one where he had it open in under 1:45 👍
JC lpl is a really good picker though
I just got my first lock pick set yesterday because of your channel and I was wondering are you using the pick as a lever to lift the pins up, or are you rotating the pick to lift the pins up?
why am i binge watching this
You lost a ball bearing from the lock? That is a very impressive lock. It was probably smaller than the balls that come in common ball bearings, so that was a very, very small ball bearing you lost.
Ball bearings consist of several balls and two races. Often the balls are separated by means of a cage, although there are designs that don't need a cage.
I suspect what you actually lost was a ball, similar to those that are often used in the construction of ball bearings.
next up: using a helicopter rotar to open a lock
A whole minute, using a specific tool, that counts as high security on the LPL scale surely.
He didn't show how fast it would be without the tool though
He did say that it took someone less experienced with such locks 15 minutes to pick it with this tool. So a burglar without it might take lot longer
Michał Pietrzyk a burglar would not be able to pick a multi lock to be honest, they require a lot of skill
Harry, why don't you make your own tool like you and Bill did with the disc detainer pick? Then you could do something about the rails on the pick. As well as shorten the length.
Good luck finding that ball bearing haha
It was interesting seeing your lockpicking with the tool since it very clearly shows your movements (both the depth of your pick, and how you rotate it)
man you're godlike LPL
Would have liked to have seen you pick the training lock.
LPL is there any high security lock you can't pick up till now?
Also is there any updated video with hardest locks to pick up?
How do you not have a million subs by now?!
Here comes rotor pick😮
Wow that looks almost too easy!
*I know it goes against everything most have ever been taught But deliberately doing a poor job of installing a deadbolt lock set so that it takes two hands to get in. One hand to turn the key and the other hand to lift or push or pull on the knob/door to eliminate the side load on the bolt. Since most lock picks are thin and rather easy to bend and can not be used to strong arm a bolt open such as a key would. and Adding dificulty since the lock picker is not familiar with the intricacy of the installation*
*In other words , you don't want that dead bolt to be butter smooth. You want just a little bit of a wrestling match xD*
Blocked User the core will turn/pick before it retracts the bolt meaning you can pick he lock then remove the tool and use a flat screwdriver. Have done that a few times =]
GxAxV I see what you mean and you are right , once the core breaks free and starts to turn you slip in the screwdriver and play with the physics of the installation. I think it still adds a level of difficulty that makes it a little more involved and physical than just the pick. You need to keep tension on that screwdriver and not slip off while trying to figure out how to unload the tension on the bolt. Not as easy as some might think but it really is probably more common to see a sketch installation than a butter smooth one out on the street. Thanks for pointing that out.
Always amazing content
Can you use this device more so in your video? Its more satisfying to watch as you can really see and almost feel the pins clicking into place.