BEST quality Ambient light interior installed on Passat B8 [ALIEXPRESS]
HTML-код
- Опубликовано: 27 окт 2023
- On this video we will install the best aftermarket ambient led
for a resultat close to the factory installation.
This is a RGB LED with monochrome mode.
Product features:
* Monochrome Mode
* Gradient Mode
* Music rhythm Mode
It can be installed on 99% of cars.
It can work with application Android and IOS.
Installation difficulty : Easy - 4/10
↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓
AMBIENT LIGHT LINK :
s.click.aliexpress.com/e/_DcI...
↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑
Disclamer: This video is not sponsored by any brand mentioned throughout this video. All opinion mentioned are my own. Some links provided above are affiliate links. They do not cost you anything, but i make a small percentage from sale. I share the link only with tested product, if the product is not good, i will not share any link of the product. Thank you for your support. Авто/Мото
Thank you very much G, really appreciate your work and the fact that you try to reply to all the comments.
Thank you for your comment ✌️✌️ I appreciate it
TOP WORKS
Hello, it is not clear in the video how I should illuminate the door handles. Should I clamp the cables to the pins or cut them and connect them?
Hello! I bought lights like yours but I didn’t understand where to take power for the dashboard lights? Also for the all lights how can I make them turn on when the headlights of the car are on? I want to light up only in dark places
Hello, you can take the power from dashboard (tachometer), but it is not the best idea, Better to find the power in another place (like button cable). And this place depend from which car you want to install the LED. Usually you need a tester or multimeter for check which cable is for 12v from light signal. On the video for VW Passat B8 it was a blue/gray cable. You take your tester/multimeter and you check each cable with light OFF and light ON, and when you have 12V when light is ON. It mean, you can use this cable for LED power.
Hi, I have a 2018 VW Arteon and I tried to install the same ambient light in the two front doors according to your video. After installation the two big speakers in the doors don't play deep sounds and bass anymore. I connected everything well where it was originally, I controlled everything for broken wires or such, but nothing. Also no fault code. What could cause this and what could be the solution?
Hello did you find a solution ? speakers and positive signal for LED is not linked, there is no link togeter, maybe you forget to connect back the speaker. please check the wire.
Can be coded to change colors from oem multimedia, i have only white but i will put RGB
Hello, with this retrofit, unfortunately we can't manage the color from the OEM multimedia. Only with a smartphone app or with the button from the ambient light controller.
Hi! I had install the main unit and one sub unit on the left door but working only when i open the door.
I haven’t gray/blue cable. The car is a passat b8 2016 executive.
Can i have your discord for some question? Thank you so much
you've probably tied them to the cable that powers the hazard red light when door is open
Cool. Im trying to install the same lights on an 08 accord. How did you figure out what wires to splice into in the door harnesses. I cannot find anything online of which are positive and ground so Im wondering where have to connect the sub controllers to.
Hello, you are looking for wire information for door panel ? Or dashboard?
@@nocturneindustrie door panel
You can take a multimeter and test each PIN. Or you can follow the wire who go to windows button and find the signal for backlight button, if you want that the ambient light work with backlight.
@@nocturneindustrie Awesome, thanks! I wil try the multimeter.
Hi , For Arteon 2018 , I don't have grey/blue i have only grey. and brown for negative. How can i wire them . THANK YOU !
Hello, for Arteon take gray wire. 👍
Airbag light came on after install of dash and floor lights. Have I done something wrong? Any ideas how to reset?
Hello, maybe you turn on the ignition when the airbag passenger switch connector was removed?? You need diagnostic tool to reset it.
Hello, I also have the same problem, I have a Passat b7 and if I use a gray lighting cable on the doors , everything goes out and dont have power and if I use pin 17 special for Ambilight , the LED strip lights up too weakly.
Hello, did you try to put ambient light to maximum power with the button on your car ?
@@nocturneindustrie i dont have a visual button on my car for ambient light i did try to look and find it wiht vcds but with out any luck
Change color from telefon or working like original from oem multimedia?nice job!
Hello, only with phone application and you can also use little button gived inside the package. unfortunatly with OEM multimedia you can't.
does the controllers need to be connected via cable to the main controller? or they just need to have 12v power and they automatically connect to the main board?
Yes just need 12v and all the sub controller will connect to main controller.
@@nocturneindustrie that is so easy to install without connecting to the e main board
I have another question, can it be harmful? I temporarily connected sub modules to a constant 12+ from the Window Mechanism and the main module with the cigarette lighter Grey Cable
i don't think because sub controller consumption is very low. you can try and check if your battery keep power. but what you mean cigarette lighter grey cable? main controller have only red and black
@@nocturneindustrie i use it now for couple of weeks and no problem with cars battery 🙂 , main module is power it from my cigarette lighter its controlled with cars light and there i use the grey cable and connected with red cable of the main module and no problems but on the doors the grey cable give voltage problems and the system shot off thank you for your great install video my friend
is it possible to cut all the led stripes? i mean if it's possible to cut the longer one 100cm led with 2 terminals cause i saw in the video that u cutted the 75cm one i wanna install them inside a volkswagen polo tdi 2011 european do you think that they fit? thank u if u r gonna reply bye from italy
yes you can cut the stripe but always let around 1CM because when you cut sometime the end of stripe can have different color. Example you put blue color and the end have purple. For fix that you just need to cut again 5mm and try . It happened with me. i just cut again some milimeter and the color became same for full stripe. inside the stripe there is LED bar.
@@nocturneindustrie For the 100-110 cm one with 2 connections, is there any point in connecting both sides to a controller?
Hello, you don't need to connect 2 connector, on this one you have to take the size you need and cut off the excess. Or if your dashboard have the possibility (the design). you can use example : 15cm for driver side and 80 cm for passenger side.
Hello thanks for this video !! Just one question please, i have a 2019 Arteon ( same Interior passat b8 ), but i dont have LED oem, i will found anyway Gray/blue and brown cable ? Thanks 👌🏽
Hello, yes it must be same color, it is same plateform, but there is some people who had problem to install it with gray/blue cable on the door, because the BCM module cut off the power for light (detect a fault). it depend about the bcm model. it is possible to install on permanent 12V power for the subcontroller and try to find on dashboard gray/blue 12V signal for main controller, for reduce the consumption on the energy.
@@nocturneindustrie Ok, if i add with VCDS light door you think it can be worked ? And when you Connect + and - on cable, you just cut the cable or you Connect it directly on the pins ?
You mean if you install OEM LED ? Because even you use coding for activate the LED the wire is different, blue/gray is used as a signal for headlight and dimming light button. If you activate with vcds the LED it will be okay for OEM LED but for not OEM it will not work. BCM will cut off because the control module (from china) take more energy that OEM LED.
That’s a problem with my installation, on wich other wire can I install it on the door , passenger and driver doors???
hello, tell me on which car you want to install the ambient light ? and if you can tell me how many cable there is on the window button from front passenger side ? and also the cable color please. i will try to help you.
hello, they have many packages on the website, which one is for the passat b8 variant?
Hello all package can be installed on Passat B8. it's about what do you want to install you can have package just with light bar another package with light bar and foot light and handle light.. it depend about what you want to install on your car. i took package with light bar handle bar foot light and storage light.
@@nocturneindustrie where did you buy these lights and which ones? can you give me the link
Check this s.click.aliexpress.com/e/_DcIlu5V
Привіт, зробив так як Ви, але не працює, блок комфорту до якого ви підключаєтесь перестає працювати, я вірно розумію, що сірий провід це + а коричневий -. Я так розумію що якщо підсвітка в авто загальна виставлена на мінімум, для блока не вистачає потужності і він не вмикається. А якщо підключитися до загального + і - який заходить в двері?
Привіт, зазвичай із синім/сірим у вас не буде проблем із відключенням електроенергії 12 В. Якщо у вас є збої, ви можете спробувати підключитися до іншого джерела 12 В. але я не знаю, чи світлодіодні коробки споживають багато енергії. і тому ризикує розрядити автомобільний акумулятор. тримай мене в курсі
@@nocturneindustrie проблема в тому що коли підключаєшся так як на відео, і підсвітку ставиш на мінімум (це саме в дверях) то підсвітка взагалі не вмикається, до того ж і зникає підсвітка в дверцятах, перестають світитися кнопки. Я дверцята підключив до загального живлення яке в них заходить, так, там постійно напруга, вже пройшов тиждень, поки проблем нема. Що до акомулятора, сама ж підсвітка не працює, як вимкнений головний блок, а він підключений до підсвітки на торпеді. Поки знайшов тільки таке рішення ((
Дякую за вашу думку для спільноти, я перевірю, чи є у мене така ж проблема, як у вас. :)
Привіт, я поставив підсвічування на мінімум і світлодіоди тьмяні
живлення, але все продовжує функціонувати нормально. Можливо, регулювання інтенсивності на BCM (наприклад, через VCDS) може вирішити проблему. У мене є висока версія BCM.
@@denys_konstantynov I have the same problem. May I know which cabal you connected to?
Can you change colours on mib2 screen ?
Hello, unfortunately no we can't change the color on MIB2. Only with the button from LED box controller. Or with smartphone application for LED box controller.
Hello, I ve a 2003 Audi a3 8p is it possible to Connect the sub controllers to the window switches. Will it harm? And is it also possible to not Connect the Dashboard light but only the door panel stripes (when i Connect the main controller of course)? Will that work?
Hello, Yes you can connect to window switch but you need to take light signal cable (12V) on switch connector. Yes you can don't use dashboard light, and connect only main controller, it will work.
Okay thanks! What do you mean with the light signal cable on switch connecter? I dont understand that. And where do you advise to Connect the main controller on?
on switch window connector, example there 6 pin connector, you need to find on this connector the cable who will turn on the door button light when it's darkness/night. it is a 12V signal, you can connect your sub module(red cable) to this cable and negative cable on the door, like that when your headlight will turn on, the ambient light also will turn on. And for main module you can connect to dashboard light switch on left side.
You mean by dashboard light switch the switch to turn on the parking light/head light and all the interior button lights like the a/c and radio lights?
Or can I Connect it to the radio or something like that?
Do I have to take BLUE OR GRAY for positive? or is it the same as one of those two?
Hello, it is 1 cable who is blue and gray. This cable have 2 colors.
@@nocturneindustrie Okay. As I found out. It is a cabal that is gray and blue in color? Is that right ?
Yes right. And for be sure and do not do mistake. Always confirm with a multimeter. If have 12v when you turn on the light it's mean it is right cable.
@@nocturneindustrie Do you have a discord link? I have a few questions . Thank you
Hello, yes discord.gg/q3zeFQAG
Can you Change color on the unit or Not ?
Hello, no you can't
hey, link in description is broken. can u please give it again?
Hello, where are you from ? Because sometime the link don't work in some country. i can try to give you a working link on your country.
@@nocturneindustriegive pls for Estonia
Hello, I connected the wires like this (blue/gray and brown) but it doesn’t work. I have the oem white ambient lights and when I connect the wires from the unit, it’s not working neither the oem or these. Do you have any idea why?
Hello, did you connect main module and sub module? and headlight is on ? On the door you took blue/gray cable ? or on the dashboard? if no OEM light that mean the BCM stop the power to light. you need to disconnect the LED and find why because it must work with blue/gray cable/. and not blue cable. with blue cable it doesn't work. check and let me know
@@nocturneindustrie yes, the main module I connected to the fuse box and it works, but the side modules on the doors are not working. Yes the blue/gray wire, that’s from the oem door lights, am I right? For some reason probably like you said the bcm stops it, but can’t figure out why..
Yes you are right, can you try to go to multimedia system (MIB) and go to "CAR" setting and put the dimming light to maximum. After that turn off the ignition and close the car. Open the car and turn on the ignition. let me know ))
@@nocturneindustrie eventually I connected it to the window motors on each door, but now the problem is I don’t know to which fuse (on the front trims I did not mount the leds) should I connect the main module to work with the oem lights (to turn on and off automatically). Do you have any idea? (I tried with the 10A fuse which is for the inside lights I think, but they don’t turn off, I don’t know why). Thank you very much for your time and help!!
Okay let's try to understand right. We will start with main controller, for dashboard light. Did you try to connect main controller to fuse N°36 or N°37 (5amp) it is fuse for headlight ?
I would like to buy the set as shown in the video via the link.
Unfortunately, the link is invalid and no longer leads to the product.
And pls bring more about the Passat B8 :)
Hello, check this link
s.click.aliexpress.com/e/_DBcogg9
@@nocturneindustrie i tryed but dosnt work :/
from which country you are ?
@@nocturneindustrie germany
ok good, on main page of Aliexpress on the top change setting, to "send to France", and after that you will have access to the page, you can contact the seller for shipping to you address. or you can write this
18 in 1 Ambient Light For Car Interior 64 Color Breathe Dashboard Door Decoration LED Strip Lights RGB Bluetooth App Control 12V
Hello, mine doesnt work. Is it the main connector youre inside the drivers door? I need Help
Hello, what you mean. You have problem to find wire of car connector ?
@@nocturneindustrie yes, I did exactly the same you did and it’s not working.. Can you help me? Discord, IG or something??
@@nocturneindustrie red wire to blue, and black wire to brown…
Hello, yes come to discord we will help you discord.gg/bykGtb9n
wire for positive was blue/gray ?
Hallo I have one question, how can I contact you, 🙏
Hello, you can contact me on discord. discord.gg/GaraPpWE
I have a question, the sub controllers have to conect each other to the main? Or they are connected wireless?
Hello, sub controller is wireless, jus need to connecte power red + and black - only
where can i find these lights? can you please send me the name
Hello, s.click.aliexpress.com/e/_DcIlu5V
the link is not working, can post a new one or tell me what i should search for?
Hello, link still working. check this s.click.aliexpress.com/e/_DDWJs1Z
@@nocturneindustrie Sorry, the page you requested can not be found:(
from which country you are ?
@@nocturneindustrie germany. can you tell me the name of the product?
try this link s.click.aliexpress.com/e/_DEaTz7p
if it doesn't work find this
18 in 1 Ambient Light For Car Interior 64 Color Breathe Dashboard Door Decoration LED Strip Lights RGB Bluetooth App Control 12V
is this for the chinese passat or european passat??
Hello, it is for Euro Passat
@@nocturneindustrie good! I just ordered, do you have an email I could contact you with or discord?
Great, you can find us on Discord. ;)
@@nocturneindustrie what’s the discord server?
discord.com/invite/PM74Ycq9
Can you send me the link please
Hello, chech this :
s.click.aliexpress.com/e/_Dki0FgD
Hello everybody you cqn find this LED AMBIENT LIGHT on this link
😎😎😎😎↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓↓😎😎😎
s.click.aliexpress.com/e/_Dki0FgD
Symphony lights are better
Hello, symphony too much tuning))
i need some help how can i contact you
Hello, you can contact us on discord
discord.com/invite/cSCcCXbF
whats your discord link please
Hello, discord.gg/hmcMWacS