Killer Rip Brother Eric 😜!!!! Great to see Humpty back out again and holding together overall 👍. Huge thanks to Mitch and Avery for the hard work they've put into fortifying this platform 😍. The chassis brace has been incredible 👀. I was about ready to shelf Bertha until their ingenious design came about. So grateful they put their creative powers and expertise together. Breaking arms is one thing, but replacing chassis's regularly gets old quick 😂. Sweet sends and freestyle Brother!!! 🚀🚀😎💪👊👊
Thanks Brother Rich!😁Yeah I would've had almost no issues if it wasn't for the pins popping. Now I know I need RPM pins throughout based on every coment!🤣🤣Huge props to M2C for making this rig thrash proof! The 8mm bash bar is a true game changer!💪💪A few more small kinks to work out and it'll be golden! Had so much fun at the dirt spots! My neighbor joined me with his Truggified Typhon and Revo. Neither lasted long but he had fun being out there!🤗Thanks for watching bro!😎👊💪🤘🤘🍻
Yes Mitch and Avery lupper? Are the main ones on this platform there work is amazing a work of art, apart from that my favourite tube dudes keep ripping and bashing? Hope Ur having a good day 🙂
M2C converted the rig to something more AWESOME 💪 They did an amazing job 👍👍 BEST PART OF THE VIDEO: Truck "Eric, I am tired, I want to go home! I jump into the bed of the truck, ok Daddy?" 🤣🤣🤣
😆Yeah it was ready to be done and go home!🤣🤣Crazy what the X Maxx takes with the right M2C upgrades!! That bash bar is the best thing since sliced bread!😎💪🤘🤘
Great bash with Humpty Dumpty Brother. I threw those pins in the trash. Went to Fastenal and got long bolts with lock nuts and ran them through all 4 corners. No problems since 👍
Hella beatdown once again with humpty Dumpty LoL 🤣. Your Xmaxx is cursed Eric 🤣. Bummer on the breakages Bro. Glad you got some good footage in. She LVC straight to the truck bed was hilarious 🤣. Longer screws with lock nuts will solve your hinge pins issues. Awesome sends as always Ramp Blast Bro.
that bash bar is the truth......that thing held to rcdude81 way longer than i thought it would......definitely needs a control arm upgrade but thats HUGE win from M2C
Rpm captured hinge pins fit that pin issue on the bottom and u can buy another set and do the tops of the rear hubs but I think the front interfere with the steering a bit
Wow! You put it through the ringer! That's impressive what humpty dumpty can take with the M2C treatment!! Top notch video as always!!👌 I'll be tuned in to see how the stainless bolts work in place of the hinge pins.. not sure I understand the philosophy behind using stainless material for hinge pins. I mean stainless steel is not particularly strong. I suspect the stock TRX pins are stronger. I know many have used the RPM and CEN pins(bolts), but let's admit that many don't even come close to the level of abuse that you're dishing out!!😎 Peace!!
Amazing sends!!! 😉😉 It would have been in pieces without the upgrade parts holding it together!! Looked like a lot of fun for just having to change out a few arms. 💪💪
Like everyone is saying, rpm hinge pins are a must with these rig. They have poorly designed pins from the factory. Also traxxas HD arms are a must for the xmaxx. I also prefer aluminum shock caps with a bump stop below shock piston. All of that combined with your M2C stuff should be crazy durable
Awesome bash! great to see them m2c tough bits holding up! For those pins popping out, you can get either some RPM or CEN hingepins, which are like a nut and bolt which pinches the arm together, then youll never lose the screws or pins so maybe order some of those! Again epic bash! 💪😃👊
Not sure how I haven't seen your channel till now but awesome bash bro, will be watching more for sure after that...XMAXX's are so tough, then yours with all the M2C is awesome...great vid!!!👍👍
Fantastic Beatdown of this M2Cified Xmaxx brother.... She looks close to where you want er. I know you know what to do about those pins but I might suggest the HD arms as well for RCDUDE81 sends😳😉 M2C Tough brother... This would not be possible on a stock Xmaxx! She is such a wild and Wonky beast... I love er
😱😱😱 That was some serious Xmaxx abuse Eric! I would go with the Traxxas HD arms. Definitely a step up in toughness. I can't believe the doubles and triples that you were able to pull. Some serious air 🚀🚀 Loved the LVC into you tailgate 🤣🤣
Wow! awesome bash! I'm just glad we finally got her tough enough to survive you! cant believe you lvcd it into the back of the truck! thanks for punishing the parts!
Thanks so much Avery!😊Yeah she's finally staying in one piece! Just need to invest in some Cen or RPM pins to hold these dang arms on!🤣The Chassis brace-Bash bar made such a Game changing difference!!😎💪💪👊🍻
Cen and RPM both make threaded hinge pins. The Cen ones are stronger, I don't have part # on hand. That would be another good part for M2c Racing to make
Great video bro!! You should get the rpm hinge pins so they don't keep popping out and it will make the arms a little bit stronger too. Big sends to the moon!!
What an absolute vicious bash Eric. Goodness gracious bro! Talk about torture tests. Seeing that thing fly like that, wow man lol. Good to see those upgrades make it tougher. Gnarly triples and overall crazy sends. I think you are definitely the King of torturing the Xmaxx lol!
Thanks bro!!👊Had a blast with Ole Humpty!😆The M2C upgrades finally made this rig hard bash worthy! Just got to sort the pin popping problem! Looks like everyone is suggesting the Cen or RPM pins. After that it'll be unstoppable!😁💪🤘🤘
I’m looking into building a fully decked out rig like this, which platform do you think is best for the type of driving in this video…. Xmaxx, outcast 8s, or krayton 8s
Awesome!! I wanna see if it will withstand the sends you do!! It's on my list to get but I'll wait and see if it's as tough as arrma guna take alot to fill those shoes. But im assuming m2c is guna start making some goodies now means u got your hands on one!!!#ARRMATOUGH #M2C
Yeah can't wait to find out either! Imo this 4s platform is built night and day better than Arrma's last 4s line but also can't wait to see their new model!😎👊
Love watching your vids bro just something about people sending these rigs and really giving them a true bashing to show the rest of us that dont do as hard of a bashing that these rigs can take it and m2c make the best aftermarket parts for them and I've found the cen pins help on hard landings for the arms...keep up the awesome vids.
Hey there dude hope Ur having good day, was wondering cuz my X maxx 8s is nearly MWC up what wheels would u recommend thank dude look forward to ur review 👍
Man absolutely sick xmaxx sends. It sounds like a straight up circular saw haha. Maybe mitch could come up with a pin. I don't have an xmaxx so I do t know about tire rim clearance to the arms n hubs but if mitch could make a pin similar to the arrma hinge pin brace sets, where the pins threaded on both ends n retained with nuts n lock tight I bet it would hold up alot better. Love the lvc truck bed landing haha if it landed n stayed that would have been monumental haha. Awesome bash video as always man 🍻🍻🍻🍻🍻🍻
M2C had to come out with a motor bell support because there so called Motor mount and top brace where bending. The motor mount it self is the weak spot. But the top plate was bending bad. I saw several videos of these bending. The wide kit is not wide enough. 30mm total maybe 50mm to 60mm would be better.
The end bell support is for running the big heavy 56 size cans. Very nice design! Any motor mount will bend doing big airs with a heavy unsupported motor.👌Also the wide kit is 30mm total. 15mm per axle. Just the right amount imo without causing other weaknesses.
Hi Eric. I have an xmaxx with the castle 1100 kv motor. I’ve never used hobby wing before. I’ve been thinking of getting one to try out. What is your opinion on the hobby wing?
@@RCDUDE81 Thanks Eric. I appreciate the input. My kids an I own over 40 different rc cars and want to try different set ups. Love the videos. Keep them coming.
Yeah the pins suck rpm is a better fit and the a arm not so much IMO. Let's us know what the pro comes up with nice bash mine is on the table with a bunch of hop ups otw
@@RCDUDE81 the 24 mm hubs need to be bought separate they are $70. The extended hub set m2c sells comes with that stupid jig to drill out your hexes. That is another $130.
Never understood the need to try and break it. It gets expensive and it ends up sitting waiting for parts unless you have a hobby shop near. Everything comes from eBay lately. Week out...
If you don’t like the truck so much why have one. Are you talking down on the truck because Kevin T does that same thing about Arrma. Is that why your saying that about the XMax???
Im always Amazed how you Both Laugh like little giggling Girls when you do something Ridiculously big then break the trucks....both armma and traxxas, then proceed to complain with comments like " arrma tough baby " or " traxxas tough baby "..........seriously?? You're the type of person to Destroy a Big Block 427 whilst doing a 7k burnout and then call Chevrolet Shit for throwing a leg out of bed! LoL Everything has it's Limits you understand?
@@RCDUDE81 Hahaha That's Amazing Restraint man! I would Cut sick in my Reply! Are you still Loving the Xmaxx? I have Three of them Now. One fully built with Anondized ally, including the Chassis that is a Pretty boy that really only drives in Primo conditions without much chance of getting dirty, One with the Xmaxx Wide kit with the XLX2 and an 1100kv Kermit can with M2C all over it and this is the Full blown Basher Whip King, skate park assault machine and One for the Coffee table that is Completely Unmodified but with Proline Trenchers on the Proloc Rims. I Also have Two K8's but I do not have much respect for them as the Xmaxx's are my Girls!!! LoL Cheers young man!
if you put CEN pins in the arms it stops them popping out. nice bash by the way!
Thanks for the tips Kev! Definitely getting some on order!😎👊👊
Rpm also makes some, CEN is still PG though 👌
@@SaltyDuck97 Thanks! M2C will have a solution soon!💪
Shutup Talbot!!!
@@Cornelius456 Tf is wrong with you? xD
Killer Rip Brother Eric 😜!!!! Great to see Humpty back out again and holding together overall 👍. Huge thanks to Mitch and Avery for the hard work they've put into fortifying this platform 😍. The chassis brace has been incredible 👀. I was about ready to shelf Bertha until their ingenious design came about. So grateful they put their creative powers and expertise together. Breaking arms is one thing, but replacing chassis's regularly gets old quick 😂. Sweet sends and freestyle Brother!!! 🚀🚀😎💪👊👊
Thanks Brother Rich!😁Yeah I would've had almost no issues if it wasn't for the pins popping. Now I know I need RPM pins throughout based on every coment!🤣🤣Huge props to M2C for making this rig thrash proof! The 8mm bash bar is a true game changer!💪💪A few more small kinks to work out and it'll be golden! Had so much fun at the dirt spots! My neighbor joined me with his Truggified Typhon and Revo. Neither lasted long but he had fun being out there!🤗Thanks for watching bro!😎👊💪🤘🤘🍻
Yes Mitch and Avery lupper? Are the main ones on this platform there work is amazing a work of art, apart from that my favourite tube dudes keep ripping and bashing? Hope Ur having a good day 🙂
That tailgate lander was sick! traxxas tough baby! LOL!
😆Yeah I meant to do that!😜😆
M2C converted the rig to something more AWESOME 💪 They did an amazing job 👍👍
BEST PART OF THE VIDEO: Truck "Eric, I am tired, I want to go home! I jump into the bed of the truck, ok Daddy?" 🤣🤣🤣
😆Yeah it was ready to be done and go home!🤣🤣Crazy what the X Maxx takes with the right M2C upgrades!! That bash bar is the best thing since sliced bread!😎💪🤘🤘
You are aBasher!!! Bombing into the Dodge was Epic! 🏆😎
Great bash with Humpty Dumpty Brother. I threw those pins in the trash. Went to Fastenal and got long bolts with lock nuts and ran them through all 4 corners. No problems since 👍
Thanks buddy and thanks for the tip! Definitely doing something like that before another bash!😜
Awesome Eric yeah those pins are annoying my friend had the same issues when we were bashing last year. Send Mitch to the rescue for that one. 👍👊🍻
Thanks bro!!👊Yeah in the future works! For now I put on some RPM pins.😎💪🤘🤘
Hella beatdown once again with humpty Dumpty LoL 🤣. Your Xmaxx is cursed Eric 🤣. Bummer on the breakages Bro. Glad you got some good footage in. She LVC straight to the truck bed was hilarious 🤣. Longer screws with lock nuts will solve your hinge pins issues. Awesome sends as always Ramp Blast Bro.
Brutal! LOVE IT!
The Backflips are perfect for the Xmaxx
Totally agree! Lightweight, good traction and they don't blow instantly like stock tires.🤣
that bash bar is the truth......that thing held to rcdude81 way longer than i thought it would......definitely needs a control arm upgrade but thats HUGE win from M2C
Rpm captured hinge pins fit that pin issue on the bottom and u can buy another set and do the tops of the rear hubs but I think the front interfere with the steering a bit
RPM threaded hinge pin set,way better set up,they make threaded pins for the hub end too.U gave that xmaxx a nice whipping.👍👍👍
U definitely need the rpm hinge pins for it. It will keep the arms from flexing and popping out the pins.
Hell of a bash bro damm son love my Xmaxx wide maxx kit made a world of difference no question
Second Brother!! What a beast💯👍👍
This guy is the most insane xmaxx basher I've ever seen💯
Awesome run buddy well the bash bar is definitely doing its job great video man
Wow! You put it through the ringer! That's impressive what humpty dumpty can take with the M2C treatment!! Top notch video as always!!👌
I'll be tuned in to see how the stainless bolts work in place of the hinge pins.. not sure I understand the philosophy behind using stainless material for hinge pins. I mean stainless steel is not particularly strong. I suspect the stock TRX pins are stronger. I know many have used the RPM and CEN pins(bolts), but let's admit that many don't even come close to the level of abuse that you're dishing out!!😎 Peace!!
Almost flying tank ... If it landed on the pickup truck it would be a first-class stunt number 🤣👍🔥
🤣🤣
Yeah Kev T is right or you can use the RPM captured hinge pins with the nut on it.
Slick rip! Good camera flybys👍💯👊
Thanks buddy! Thanks for noticing details!😁👊👊
As always going hard
What a good driving!!
Amazing sends!!! 😉😉 It would have been in pieces without the upgrade parts holding it together!! Looked like a lot of fun for just having to change out a few arms. 💪💪
Get a set of RPM hinge pins that should stop the issue with the arms💪
Awesome run brotha! She took some serious hits out there man! 😱💯⚡⚡⚡⚡⚡⚡
💯 % BEAST MODE!!!
Like everyone is saying, rpm hinge pins are a must with these rig. They have poorly designed pins from the factory. Also traxxas HD arms are a must for the xmaxx. I also prefer aluminum shock caps with a bump stop below shock piston. All of that combined with your M2C stuff should be crazy durable
Awesome bash! great to see them m2c tough bits holding up! For those pins popping out, you can get either some RPM or CEN hingepins, which are like a nut and bolt which pinches the arm together, then youll never lose the screws or pins so maybe order some of those! Again epic bash! 💪😃👊
Thanks Noah! Thanks for the tips! I'm still figuring this Humpty Dumpty out!🤣🤣
@@RCDUDE81 haha yeah she’s a little unstable but once set up right a monster of a basher! Keep up the good work brother 😀💪👍
6/32 screw and nuts for the pin replacement
Not sure how I haven't seen your channel till now but awesome bash bro, will be watching more for sure after that...XMAXX's are so tough, then yours with all the M2C is awesome...great vid!!!👍👍
Nice video bro you have toughened up the Xmaxx a lot! Awesome bashing 👍
Fantastic Beatdown of this M2Cified Xmaxx brother.... She looks close to where you want er. I know you know what to do about those pins but I might suggest the HD arms as well for RCDUDE81 sends😳😉
M2C Tough brother... This would not be possible on a stock Xmaxx!
She is such a wild and Wonky beast... I love er
😱😱😱 That was some serious Xmaxx abuse Eric! I would go with the Traxxas HD arms. Definitely a step up in toughness. I can't believe the doubles and triples that you were able to pull. Some serious air 🚀🚀 Loved the LVC into you tailgate 🤣🤣
Thanks Aaron! Ordered some HD arms today plus the RPM hinge pins. M2C has definitely taken this truck to the next level!😱💪💪
Wow! awesome bash! I'm just glad we finally got her tough enough to survive you! cant believe you lvcd it into the back of the truck! thanks for punishing the parts!
Thanks so much Avery!😊Yeah she's finally staying in one piece! Just need to invest in some Cen or RPM pins to hold these dang arms on!🤣The Chassis brace-Bash bar made such a Game changing difference!!😎💪💪👊🍻
Great stuff some m2c hing pin braces would also be a nice upgrade 🙏
Nice beatdown! The RPM hinge pins fix that problem right up bud. I'm sure a whole bunch of people mentioned that already 😂👍
Thanks bro! Oh yeah like 50!🤣🤣
Wow! Epic sends👊🏻 I think it looks better the way you lowered it😎
Thanks bro! Yes I like it much more that way!😁👊
A wild animal that one is 😯
Cen and RPM both make threaded hinge pins. The Cen ones are stronger, I don't have part # on hand. That would be another good part for M2c Racing to make
Thanks for the tips bro! Looking into it for sure!😎👊
Great video bro!! You should get the rpm hinge pins so they don't keep popping out and it will make the arms a little bit stronger too. Big sends to the moon!!
Awesome bash bro! 👌 definitely some rpm hinge pins will solve that!
Thanks Matthew! Picked up a set of RPM's today! Hopefully M2C will also have a solution soon.😁
You can get Pins With end Locking Nuts to help stop this issue !
Epic!!!
Beastmode!, What part number are those Arrma Backflip wheel/tires?
Glad it hit the tailgate and not the bedside 😳
What an absolute vicious bash Eric. Goodness gracious bro! Talk about torture tests. Seeing that thing fly like that, wow man lol. Good to see those upgrades make it tougher. Gnarly triples and overall crazy sends. I think you are definitely the King of torturing the Xmaxx lol!
Thanks bro!!👊Had a blast with Ole Humpty!😆The M2C upgrades finally made this rig hard bash worthy! Just got to sort the pin popping problem! Looks like everyone is suggesting the Cen or RPM pins. After that it'll be unstoppable!😁💪🤘🤘
@@RCDUDE81 for real. It took a serious beating. Pure entertainment 😃
I’m looking into building a fully decked out rig like this, which platform do you think is best for the type of driving in this video…. Xmaxx, outcast 8s, or krayton 8s
Any of the above lol.
Outcast or kraton you see all the issues with crap xmaxx
Damn I been waiting for the skeeter video to upload lol!! Epic video though
😆It's coming.....🤘
Awesome!! I wanna see if it will withstand the sends you do!! It's on my list to get but I'll wait and see if it's as tough as arrma guna take alot to fill those shoes. But im assuming m2c is guna start making some goodies now means u got your hands on one!!!#ARRMATOUGH #M2C
Yeah can't wait to find out either! Imo this 4s platform is built night and day better than Arrma's last 4s line but also can't wait to see their new model!😎👊
I think alot of ppl can't wait for the arrma 4s model to come!!!
Great bash my m2c on the way
Hell yea nice rip 👊🏼🔥👍🏼💪🏻
Great bash , you really need the rpm hinge pins. Will sort the pin problem 👍🏻
Thanks for the tips bro!😎👊
Love watching your vids bro just something about people sending these rigs and really giving them a true bashing to show the rest of us that dont do as hard of a bashing that these rigs can take it and m2c make the best aftermarket parts for them and I've found the cen pins help on hard landings for the arms...keep up the awesome vids.
I have a 6s and a 8s XMaxx.. i cant finish a battery without breaking my spur.. over and over again. i tried everything.. any ideas? Thanks great vid!
No wonder people love the xmaxx even more tougher with the upgrade thanks for the nice content 💪🏽
Stock it didn't last 3 mins!🤣minutes! M2C + drivetrain setup she's finally hard bashable!😁💪💪
awesome vids! duperbash jr! lol
Hey there dude hope Ur having good day, was wondering cuz my X maxx 8s is nearly MWC up what wheels would u recommend thank dude look forward to ur review 👍
Looks like you are starting to like it a bit. They are tough
Yes! I had terrible luck until all the M2C beef! Huge difference!😁💪💪
Soak the a-arms in WD40, makes them more flexible. 👌😄
😆Yeah! I'm going HD arms and RPM pins for now until M2C makes a solution!😎👊👊
@@RCDUDE81 Awesome! The truck looks like a killer!
or if you out in the field and don't have the pins .... zip ties to the resque to keep the arm "closed"
Any word on any new parts for the mini maxx brother?
I don't have a Maxx but from what I hear it's pretty solid as is. Might reach out to Mitch or Rich Duperbash as he has one.😎👊
Awesome footage. Cen hinge pins or RPM pins👌👊💪💪💪💪💪💪💪💪💪💪
Thanks for the tips!😎👊👊
@@RCDUDE81 been following u for years. First time I could help. I feel wicked smart😆🤣🤣🤣🤣🤣🤣.
Awesome driving… do you run stock ring and pinion front and back? mine keep stripping
Man absolutely sick xmaxx sends. It sounds like a straight up circular saw haha. Maybe mitch could come up with a pin. I don't have an xmaxx so I do t know about tire rim clearance to the arms n hubs but if mitch could make a pin similar to the arrma hinge pin brace sets, where the pins threaded on both ends n retained with nuts n lock tight I bet it would hold up alot better. Love the lvc truck bed landing haha if it landed n stayed that would have been monumental haha. Awesome bash video as always man 🍻🍻🍻🍻🍻🍻
Sup my Dude..👊🏼🤠
Correction.. it appears the CEN pins are steel, the RPM are stainless. I'd be weary of stainless for hinge pins.✌
@rcdude81 With these upgrades, would you say the big xmaxx is as durable as the 1/8th scales?
With all these upgrades it's close yes! Definitely MUCH tougher than an all stock Xmaxx! M2C has really gamechanged this rig!
Ok brother , xmaxx or K8 😜 I want 1/5 scale and can't decide. Love my Kraton ExB.
M2C had to come out with a motor bell support because there so called Motor mount and top brace where bending. The motor mount it self is the weak spot. But the top plate was bending bad. I saw several videos of these bending. The wide kit is not wide enough. 30mm total maybe 50mm to 60mm would be better.
The end bell support is for running the big heavy 56 size cans. Very nice design! Any motor mount will bend doing big airs with a heavy unsupported motor.👌Also the wide kit is 30mm total. 15mm per axle. Just the right amount imo without causing other weaknesses.
I have a steel motor mount that after about a year of use at 100 ft drops has not bent yet. That is with a Castle Creation 1100KV 2028.
@@Airbrushkid No disrespect but I'm having a hard time believing that. LoL 🤣
@@CommanderAstigRC yeah and dropping the car out of your dad’s office window doesn’t count as a jump.
You got video of your 100ft drops having everything survive? I gotta check this out sounds epic! 😜
Hi Eric. I have an xmaxx with the castle 1100 kv motor. I’ve never used hobby wing before. I’ve been thinking of getting one to try out. What is your opinion on the hobby wing?
Imo it's a powerhouse motor! Fast and loads of torque in the Xmaxx! Paired with Max 5 it's definitely more than enough power!😎💪🤘🤘
@@RCDUDE81 Thanks Eric. I appreciate the input. My kids an I own over 40 different rc cars and want to try different set ups. Love the videos. Keep them coming.
The Castle 1100kv can is roo big for the M2C Setup, if going 1100kv go hobbywing
Hey how much for u to build me the same truck with all the upgrade plz
Put cen hinge pins
Dude awesome footage getting her dialed in. Hoq did you lower the ride height?
I used rc boat Silicone cooling line. Cut half inch pieces and slid over the shaft under the piston. Had to disassemble the shocks but I like it!😎👊
It's actually hilarious how you make a 1:6 scale almost behave like a 1/10, the X-Maxx needs a cigarette after that 😂 😂
🤣🤣🤣🤣🤣🤣💯💥 a box of 20 the kinder work he’s putting in 😎😎
Yeah she's nimble for sure! Way overpowered +The right upgrades will do it!🤣🤣
Nice bash man what shock oil do u use n the xmaxx
Thanks!👊Stock 30weight with the M2C o ringed pistons.
This video must’ve been a pain to make broken every time you jump it
Yeah the pins suck rpm is a better fit and the a arm not so much IMO. Let's us know what the pro comes up with nice bash mine is on the table with a bunch of hop ups otw
I hate taking people to the spot when they are just gonna be watching me play......because they broke theirs 5 mins in.
🤣🤣Yeah my buddy had bad luck fast. His cars weren't really ready for bashing but he had fun being out there anyway!😜👊👊
Hub extenders. Lol. What a joke. Did you try screw on a standard Xmaxx nut?
These M2C extended axles come with the 24mm hex also. They can be removed if you want to run the Traxxas hex. You still get 30mm all together!😁
@@RCDUDE81 try screw on a traxxas nut. Remove the 24mm adapter.
@@RCDUDE81 the 24 mm hubs need to be bought separate they are $70. The extended hub set m2c sells comes with that stupid jig to drill out your hexes. That is another $130.
Never understood the need to try and break it. It gets expensive and it ends up sitting waiting for parts unless you have a hobby shop near. Everything comes from eBay lately. Week out...
I'm out to find weak spot on purpose as a tester for M2C racing. Gotta give the parts hell!😁💪🤘🤘
If you don’t like the truck so much why have one. Are you talking down on the truck because Kevin T does that same thing about Arrma. Is that why your saying that about the XMax???
I didn't talk it down. Just having fun! I have it mainly for testing parts for M2C. Getting it more and more dialed!😎💪
First Bitches!! LoL 😂
Early bird gets the worm!🤣🤣
Buy an airplane or drone
Im always Amazed how you Both Laugh like little giggling Girls when you do something Ridiculously big then break the trucks....both armma and traxxas, then proceed to complain with comments like " arrma tough baby " or
" traxxas tough baby "..........seriously??
You're the type of person to Destroy a Big Block 427 whilst doing a 7k burnout and then call Chevrolet Shit for throwing a leg out of bed! LoL
Everything has it's Limits you understand?
🤣It's all fun and games bro! Been in this hobby for quite some time and enjoy pushing the limits! I know how things work. Just having fun!😜👊
@@RCDUDE81 Hahaha That's Amazing Restraint man! I would Cut sick in my Reply!
Are you still Loving the Xmaxx? I have Three of them Now. One fully built with Anondized ally, including the Chassis that is a Pretty boy that really only drives in Primo conditions without much chance of getting dirty, One with the Xmaxx Wide kit with the XLX2 and an 1100kv Kermit can with M2C all over it and this is the Full blown Basher Whip King, skate park assault machine and One for the Coffee table that is Completely Unmodified but with Proline Trenchers on the Proloc Rims. I Also have Two K8's but I do not have much respect for them as the Xmaxx's are my Girls!!! LoL
Cheers young man!
Siiiick