We do know of 1 driving around somewhere - it may have found its way into a collector garage by now though. Thanks for watching, we're glad you enjoyed 🙌
Just a question. You don't get any problem with the regulation on the road in UK? In France except the wheel you can change anything. And you still need to stay inside the wheel size that the constructor allow in the manual... The insurance wont help you if you have a problem because they say you modified the car and its original certification. Police will stop you for noise. Now they introduce new sound radar to detect loud vehicle. And every 2 year you need to bring your car to an official check. And if something is not OEM they will not provide you the document to drive on the road. Plus they are checking the pollution level so totaly forget about Decat...
Hope u can help. I fitted an injen intake onto my fk2 yesterday, and after starting the car, it felt as if it was going to stall so I kept my foot on accelerator at 2000 revs for a few minutes and it was idling fine I then took it a run felt fine when I got back I left the car running and it started to slightly over rev it flagged up a mass air flow PO102 code on my obd so I disconnected the battery for a few minutes and tried again it started over reving again so when I disconnect the sensor it idles fine could u please tell me what u think this could be thanks
Hello, our team will be more than happy to help diagnose and solve your issue. Please could drop us an email to sales@dream-automotive.com, or alternatively give us a call! Thank you
Hi sir, great video as always. Just a question, I have dynotuned my Fk2 last year with Airtec intercooler + downpipe (383HP). I have installed the Eventuri intake bought from your website (best mod and sound IMO). I plan to install the milltek exhaust. Do you think I need to do another dynotuning setup?
Hello, is there an oil catch can solution for the FK2R? I would like to install one on PCV side. I haven't found a suitable place yet either. You could make a video about it.😎
The exhaust was very lively before with a brutal note, we agree it sounds better now it has been tamed! We're not sure of the wheels - they were from a brand we don't see very often. They're very nice though!
The wheels were from a brand we don't see very often and unfortunately we're not entirely sure what they are! They do look great on the car though! Thanks for watching!
If you had to choose 1 of the turbo charged type r which would you choose? I bought the fk2 because it to me that little bit more individual as they made so few of them
After having one of each, the best performing car is the FL5 - it's a very natural feeling jump from the FK8, as is the FK8 from the FK2! The FK2 will always have a special place in our hearts as it's the platform that we started on - likewise for the FK8, the introduction to the USA market was huge for us as well as taking home many a trophy in one! It's a very difficult question - can we say 1 of each? 😅😅
Fk2 is for me the best looking typeR ever made. I still drive my old FN2 and i love it to bits.
Wish we would’ve gotten FK2s here in the states 😢… awesome video
We do know of 1 driving around somewhere - it may have found its way into a collector garage by now though. Thanks for watching, we're glad you enjoyed 🙌
Fk8 is just a Better car
Buy
@@hondamanvtec2894 oh I love mine but love the old type Rs we never got here in the US
@@hondamanvtec2894it's not. Lot of problems with overheating, turbo, and so on
Sounds beautiful, looks beautiful, is beautiful.
Thanks for watching! 🙌
Happy New Year from Southern California!
Thank you - Happy New Year from all of us here at Dream Automotive 😁🎉
The fk2 is just the best looking of the 3
Nice work bro 👌 always good to watch a professional at work
Black edition as well nice 👌
Just a question.
You don't get any problem with the regulation on the road in UK?
In France except the wheel you can change anything. And you still need to stay inside the wheel size that the constructor allow in the manual...
The insurance wont help you if you have a problem because they say you modified the car and its original certification.
Police will stop you for noise. Now they introduce new sound radar to detect loud vehicle.
And every 2 year you need to bring your car to an official check. And if something is not OEM they will not provide you the document to drive on the road. Plus they are checking the pollution level so totaly forget about Decat...
Honda the best!!!!!!!
You know it!
Hope u can help. I fitted an injen intake onto my fk2 yesterday, and after starting the car, it felt as if it was going to stall so I kept my foot on accelerator at 2000 revs for a few minutes and it was idling fine I then took it a run felt fine when I got back I left the car running and it started to slightly over rev it flagged up a mass air flow PO102 code on my obd so I disconnected the battery for a few minutes and tried again it started over reving again so when I disconnect the sensor it idles fine could u please tell me what u think this could be thanks
Hello, our team will be more than happy to help diagnose and solve your issue. Please could drop us an email to sales@dream-automotive.com, or alternatively give us a call! Thank you
@@DreamAutomotive wish I could mate I live in glasgow
@@meetthewalkers1383 We still may be able to provide advice or point you in the right direction over the phone! 👍
Bad ass ride
Sold my FN2 and got a FK2. Have to get some parts. 😂
Great vid! Just want to ask about LHD, are not the brake/servo fluid containers in the way for the installation of the intake?
Hi sir, great video as always. Just a question, I have dynotuned my Fk2 last year with Airtec intercooler + downpipe (383HP). I have installed the Eventuri intake bought from your website (best mod and sound IMO). I plan to install the milltek exhaust.
Do you think I need to do another dynotuning setup?
Dyno tuning isn't required after the Eventuri or an exhaust, but you will get the most benefit if the car is re-tuned so we definitely recommend it! 👍
how to verfiy the turbo condition by visual inspection
Drop us an email to sales@dream-automotive.com and our team will be able to assist you!
Hello, is there an oil catch can solution for the FK2R? I would like to install one on PCV side. I haven't found a suitable place yet either.
You could make a video about it.😎
good video nice sound from the exhaust what wheels are they?
The exhaust was very lively before with a brutal note, we agree it sounds better now it has been tamed! We're not sure of the wheels - they were from a brand we don't see very often. They're very nice though!
@@DreamAutomotive suits the car
Excellent upgrades. What wheels are they BTW?
They look like Concaver's. If you go on their site they should have images of the FK2 with all the Concaver's
The wheels were from a brand we don't see very often and unfortunately we're not entirely sure what they are! They do look great on the car though!
Thanks for watching!
If you had to choose 1 of the turbo charged type r which would you choose? I bought the fk2 because it to me that little bit more individual as they made so few of them
After having one of each, the best performing car is the FL5 - it's a very natural feeling jump from the FK8, as is the FK8 from the FK2!
The FK2 will always have a special place in our hearts as it's the platform that we started on - likewise for the FK8, the introduction to the USA market was huge for us as well as taking home many a trophy in one!
It's a very difficult question - can we say 1 of each? 😅😅
track day, bro?
We'll be looking into this later this year! 👀 Which track would you choose?
Great content. How much we talking? £££
Who fitted the Discs??
Those Badges look awful 🤢
Backward step in my opinion
I must be the only person that has a original Final edition 🤷🏻♂️🤷🏻♂️