How to connect Msi B450 Tomahawk RGB Header
HTML-код
- Опубликовано: 13 дек 2024
- How to connect Msi B450 Tomahawk RGB Header
Hello and welcome to my channel in this video i will show you how to connect rgb cable to msi b450 tomahawk rgb header its very easy and customizable.
Buy Msi Tomahawk Here:
amzn.to/30u2I7Y
Instagram: / ankitpatel_001
Hope you like this video
Thanks for watching
Subscribe my channel
Buy Msi Tomahawk Here:
amzn.to/30u2I7Y
What case do you have?
@@alexhorsford8559 msi forge 100m
fake
OMG FUCKING THANK YOU! You don’t know how much I’ve been cursing at RUclips videos this past hour trying to find where this fucking connection is supposed to go. This is THE ONLY VIDEO that even addresses it in any way!! Thank you
Thank you 🙏
thats a bad word
This helped thanks I was trying to set my wraith prisim cooler and I didn’t know the rgb header thanks
👍🏻
@@AnkitPatel04 bro I have a 3 pin wire with two holes together and one separated to the left , i have a b450 tomahawk max and cant find port please help. I have subscribed and shared your channel
You don’t need an rgb header for the cooler.
@@Tidge if you want RGB control from software then need RGB header
@@Rohan_bh I have the same problem cant seem to find how to put it in anywhere
How about 5V 3Pin GPU Board Support RGB where can i plug it?
Thanks Bro! You helped me a lot.
These only work with RGB strips right? Where would you connect an RGB fan controller?
Yes i want to know that as well
I have MOBO msi tomahawk B450 and I want to buy rgb hub controller. what should I buy 5v 3pin or 12v 4pin please reply
You need one that can plug into jusb pins on the board
12v 4pin. 5v 3pin is not supported
i have a problem, my connector from rgb hub (where are all my case fans connected) have the the same connnector but 1 pin is ended where do i have to plug it on this motherboard?
Saaaame problem
Thanks bro
I need to get another wire that you plugged into the RGB2 section. Do you know what that type of wire is called?
RGB splitter
4Ha! Too easy xD! Thanks dude :)!
you have an Msi forge 100m case, doesn't it come with 6 led control board, that allows you to connect your rgb there and power it with sata cable ?
Fan power with motherboard and RGB is separate connection in msi cabinet also
after that should i install any driver? gpu and mobo is doing well changing colors by msi mystic light but cooler rgb not
You need to connect cooler RGB to morhyrgb header 👍
@@AnkitPatel04 i have b450 tomahawk
@@hardtailmadness7821 yes you have to connect to RGB header
@@AnkitPatel04 but it is connected sir
@@hardtailmadness7821 instagram : Ankitpatel_001 send photo
this might be a dumb question so if i got rgb fans the rgb connects to there? sorry im a pc noob if you could please reply id appreciate it thank you
I am also noob ,yes if fan have RGB header then it work
@@AnkitPatel04 thank you for the fast reply!!
@@Lumios107 make sure that the fan rgb socktets are 4 pin and not three pin
Hi habe das Mainboard "MSI B450M Pro-VDH-Plus" aber es hat leider keinen 5v ARGB Stecker nur einen JRGB 12v und Ich habe den CPU Kühler "be quiet Pure Rock 2 FX" den Lüfter hab ich angeschlossen, nur mein Problem ist jetzt wegen dem ARGB Kabel von Lüfter wie schließe ich den jetzt an? bzw. gibt es nicht einen kabel der von 3 pin auf 4 pin geht und den dann anschließen ans Mainboard!?
Can you please share the link or tell the name of rgb fan(4 pin connector)
That you used in your motherboard?..
I am not finding any 4 pin rgb fan..
I have also msi tomahawk max 2..
Appreciate your help,
Thanks
can you please????
i have msi tomhawk max 2 and now finding any rgb fan in market suitable..
Can you please share some links for that?
Did you end up finding any? I'm struggling myself
My cable has 3 holes + space + 1 hole. Where is that header on the mobo?
i need same answer
You dont have that on the mobo. There are fans that are not compatible with different mainboards - although you can connect the fans to the PSU most times
I’m pretty sure that’s a argb header
@@macs.imum1699 ur a fucking life saver
@@IAmThat1Friend i dont even remember this comment anymore but glad i could help my friend
does it works withh all brand rgb fans
Hello, do you know where can i connect 5v 3pin rgb sync on msi tomahawk ? Or how i ll turn my rgb on case cause idk where i can put this 5v 3 pin. Τhere is no reception
unfortunately the msi b450 tomahawk doesn't support or have 5v 3pin
Yes
So, if i Will connect rgb Hub to it, and rgb fans to Hub, Will It work?
but what did you connect there? cooler controller hub? What the f did you connect to make it work?
Works for fans too?
Yo tengo ese mismo gabinete y no tengo ese cable de rgb sabes si lo puedo conseguir en algún lado?
Which cabinet is best for rgb header motherboard
Brother I have Thermaltake UX200 Cooler. Please tell me where to give it a power connection on this motherboard for proper RGB sync. On JRGB1 or JRGB2?? I am confused!
Connect any one
@@AnkitPatel04 On JRGB2 header it is written 12V but the Cooler specs says to connect to 5V RGB Header. Still I can connect to any header among these two?
@@mohammadumar5226 Same question :/
@@mohammadumar5226 same qst help u.u
@@mohammadumar5226 did you find any solution brother?
Bro were to plug rgb sw 2pin ?
Sir Yung audio and Mic ko sa likod ng B450 msi ko hindi gumagana ano ba pwedeng gawing repair dun? Salamat
Now I can add grb lights on mine
Bro mere pass deepcool matrex 55 mesh he or msi b450 tomahawk max kya me argb sync kr sakta hu motherboard se
Yes
@@AnkitPatel04 bhai meko apka MOBILE no. Dedo bhai rgb sync krwa do please
@@Saharsh_1660 instagram ankitpatel_001
@@AnkitPatel04 ok
@@AnkitPatel04 bhai apko message kiya he insta pe dekhlo
Jis motherboard mein rgb header nahi hai (gigabyte b450m ds3h) then how to the rgb controller given in cabinet
Using cabinet LED button
@@AnkitPatel04 should we need to plug the fan controller pin to motherboard or we can use it from cabinet led button ??
so can i just connect any RGB strips to this as long as it's 12v 4-pin and control it with pc software?
Yes but it shoud be RGB strips ,not cheap single color strip
What is your cabinate's name?!
Msi forge 100m
can i use 4 rgb case fans ,, some one please reply
Yes with RGB splitter
God bless
how can i connect 5v argb cooler wtih my tomahwak motherboard 3pin connector
I think tomhowk have only RGB support
Does this motherboard has 3 pin 5v addressable rgb header?
No 4 pin rgb
@@AnkitPatel04 OK thanks
@@AnkitPatel04 can you please tell what motherboards have this feature?
@@manolisgiannakakis9306 I don't understand question?
Bro how to sync Rgb fan to b450 tomahawk max
With Msi mystic software
@@AnkitPatel04 bhai ap ka sat personal chat ho sakti ha?
Insta wagra ha?
@@little__secret_9119 ankitpatel_001
Does 4 pin connector works for 3 pin argb fans ??
Please do reply
I don't have 3rgb so I can't tell you, i have 4rgb pin header
@@AnkitPatel04 OK thanks
I have same question I have argb Cabniet and up I m using b450 pro vdh max and it has 3pin connecter and motherboard support 4
@@11uheaven yes
My jrgb port clable missing😢
I connected the cable there but my fans still won’t light up someone please help
Flip cable
2rgb header only?
I connected my cpu coolee fan rgb on it but nothing happens :/ any idea whay can ne wrong its a cooler master hyper 212 black edition
Connect to sys_fan pwm
Having the same issue. Got the fan running perfectly but no rgb lights even with both headers
same problem, same fan. Any solution?
Check if its not plugged the wrong way on
Where is the vdg in this motherboard ? I have 4 fans aerocool eclipse but not find the conector vdg
What is vdg?
Msi boards don't have that apparently
I have the same problem have you found it already? pls help
Does it have a 12vrgb?
Probably
4 pin has 12v, 3 pin has 5v
Can i connect 6 rgb fans on this motherboard or do i have to get a fan splitter?
There is total 6 -7 fan header in motherboard including CPU fan
I went the pin on my rgb header so I guess no run for me
How to control??????
There’s 3
where does the other side of the cord go?
Does it have extra 3pin(5v) rgb header?
Two 4pin RGB header and you can connect 3pin in 4pin.
What really, i thought the 4 pin is only for 12v and not for 5v??
@@vincentyana7879 3pin is old now all motherboard come with 4pin header
i have same board no 5v header
needed one but i learn it now when it's to late
@@Im-sir-Y it can fire becuase 3 pin use 5v dc but on mainboard(i use this msi tomahawk) spend 12v dc it fire you must use box convert 12v to 5v dc
search keyword " RGB Converter 5V to 12V RGB Transfer Hub 3pin to 4pin ARGB light fan Adapter SATA plug Magnet For RGB fan ASUS Gigabyte MSI M/B"
www.aliexpress.com/item/4001360709180.html?spm=a2g0o.cart.0.0.28093c00oYp7Sm&mp=1
Rohan Gardens
why so many thumbs down????
Because it's too simple and every one know how to doit this video for only noob👍
Is b450 tomahawk max have 5v 3pin ARGB header?plz reply
4pin