Why start a cut with another tree on top? Why not start your cut from the compression side then shift to the tension when the kerf begins to tighten? Or, why not use a wedge earlier so that it would actually make a difference? I'm new at this, but it seems like a lot of simple stuff was ignored.
I’m still trying to figure out what this guy’s plan was in the first place. I get trying to cut a jammed saw out, but why cut where there’s a chance of getting the second stuck? Obviously you guessed the compression wrong the first time. Why not relieve the stress somewhere else. It looks like he’s trying to cut for lumber not firewood, so I get not ruining the log. This is just jackassery. You ran into a problem and didn’t stop to think it through before you went and tried to fix it.
hier sieht man schön im direkten Vergleich bei ab und zusammenbau der Schienen mit außen und innenliegendem Kettenrad, daß außenliegendes Kettenrad und Kupplung in (572 XP) einfach das besser/schneller System ist. Gruß H.M.
Schön dass so etwas auch Profis passiert. Da haben nur noch ein paar schadenfrohe Zuschauer gefehlt. Bitte nicht falsch verstehen, aber trotzdem saubere Arbeit. Du hast scheinbar die Ruhe weg. Ich (als Hobbybaumschubser) hätte mir wahrscheinlich zuerst eine Axt geschnappt und irgendeinen unbeteiligten Baum gefällt, damit ich wieder runter komme ;-)
Euer Arbeitsgelände und die damit verbundenen Schwierigkeiten sind immer sehr anspruchsvoll 👍 Interessant zu sehen, wie man aus solchen Situationen einigermaßen gut rauskommt. 👍👍👍
Luggi. You’re absolutely right. I own and operate many saws. About half are Stihl. About a third of them are Husqvarna. There are features I like and dislike about both brands. My comment was meant as good natured kidding. Often the written word fails to convey the intended humor.
Baaa...da hast sie endlich mit viel Kraft und Zeit raus unten und brennst sie gleich wieder fest 😨 und die zweite auch noch...das ist dir bestimmt noch nie passiert, ? Herlich geflucht und super gelöst das Problem 🖒danke für dieses ehrliche und ungeschnittene Video ,hast das Wochenende verdient 😎
Oida de ganzn scheiß englishsprachign do! Nur mäula zreisn... und den gaunzn tog form computer huka... Und austria forst... i hob scho peinlichere situationen kopt.
Looks like he’s cutting a bunch of blow down, it’s more difficult to know where the pressure is at when your logs are laying everywhere! I’ve had days like that
I had that happen to me once cutting storm damaged trees. Also got two saws stuck after I listened to a team member's suggestion to use the second saw to free the first one and I had wedges in the log. I had the fortune to have another team member nearby who went and got some heavy equipment to lift the log and both saws just fell out.
@@georgeavery7420 Thank you. I do too but the car was far away. If the other person hadn't have seen me down there I would have taken the bars off and left them there until I could get them out
If you get your chainsaw stuck, and of course, ahem, it's never happened to me, unbolt the bar and move the saw to a safe place and then try to wiggle the bar out. Then re cut the trunk a foot down. You could really damage the saw by trying to wiggle it out by force. The one time it, ahem, never happened to me, I drove home got a new bar and chain and went back.
Warum nicht einfach immer näher am Wurzelstock ein zweites mal absägen? Da hat man weniger Verschleiß als ewig herumzusägen.. Ergänzung: Und es reicht doch einfach 1/3 einsegen auf der Druckseite und dann erst von der Zugseite..?
Good video but you boys really had the worst luck that day :)) You should,I mean i would take my saw and go for a nice cold beer and come back some other day and come back with tractor or some other machine and pull those timber away if it's possible.Wish you very best and less of acc,like this,cheers.
Wasted a lot of time with that one cut. Ever noticed that the log could be cut from the other end to release tension instead fighting like a headless chicken?
Luggi hah, you think felling trees in some specific part of Austria is so special that a pro looks like a dumbass? Maybe the pro is really an amateur thinking he is a pro? Usually things are what they seem to be. I am sure if you bring a real pro from any serious foresting country, like Canada, Sweden, Finland, he would not make those beginner mistakes time after time after time. A pro recognizes compression side and cuts accordingly, releasing tension on correct side. Uses wedges if needs, but usually not needed in cases we see here
Also, ich glaube nicht, das Ihr Profis im Umgang mit Kettensägen darstellt. Ihr wütet einfach drauf los. So viele Klemmer wie Ihr hat je nicht einmal ein Anfänger. Würde mich schämen meine Unfähigkeit noch im Video zu zeigen. Tut mir leid, aber lernt erstmal den Umgang mit einer Kettensäge.
Mit Keile kann man manches machen. Keilen zum Beispiel. Und der Bohlenschnitt hilft auch. Wenn dann die aufliegenden Bäume zuerst weg sind sollte das ent..spannter.. gehen.
Please, dont call yourself a professional lumbeejack if you cant read the pinches in the lumber. Always look on the fallen tree how it bends and make a v cut on the inside of the bend and make the final cut from the outside of the bend. And another tip of cutting windfallen trees is to limb it from the bottom to the top and mark where to cut the logs whole limbing. And when you are at the top go back and cut the timber down to the base of the tree. It will get less work at trying to cut loose a chainsaw only to pinch the backup saw. Greetings from Sweden
5:45 crawls under cut log.... 7:45 finally gets out a wedge... and pounds it in... with another wedge... 🤷♂️🤣 Maybe chainsaws aren't your specialty.... 🤓😉👉
One of those days!! At least he had the balls to put it on RUclips, unlike so many others!
I guess it's quite randomly asking but do anyone know a good place to watch new series online?
@Jayceon Judson Try Flixzone. You can find it on google =)
Why start a cut with another tree on top? Why not start your cut from the compression side then shift to the tension when the kerf begins to tighten? Or, why not use a wedge earlier so that it would actually make a difference? I'm new at this, but it seems like a lot of simple stuff was ignored.
been there, done that,and know exactly how you feel. that`s when your evening beer tastes really goooooooooood!
Why not start at the bottom and insert a felling wedge when it begins to move?
@Texas CAT Manuals It is really NOT difficult, in case you have IQ 70+
Thanks for posting fails AF. There is more to be learnt here than in a vid where everything goes well.
That is true.
9:57 You're fired!
To painful to watch
But if we all had a camera for our dumbest moments...
Frank Tucker and and
i think you don't know how it is to cut down treess in the steep austrian mountainsides
It sucks when it happens but it happens to everyone sometime. Hopefully not too often. Thanks for the vids, keep them coming.
Ndankasi
you are really fucked up if your second saw ist not on board or is also stuck !
I’m still trying to figure out what this guy’s plan was in the first place. I get trying to cut a jammed saw out, but why cut where there’s a chance of getting the second stuck? Obviously you guessed the compression wrong the first time. Why not relieve the stress somewhere else. It looks like he’s trying to cut for lumber not firewood, so I get not ruining the log. This is just jackassery. You ran into a problem and didn’t stop to think it through before you went and tried to fix it.
I've been watching this video over a year now is one of my favourite failure video,👍💖🌳
That's the 2nd time you got the saw pinched. Your having a bad day. Join the club I have plenty of them. It'll get better.
Go get a Hand SAW.
Thanks for showing. Most loggers would not mention their mishaps and pretend that it does n`t happen to them.
Yes we do. Usually at the restaurant over coffee!😁
You make Bucking Billy Ray sad man
Emily Euler yes that’s for sure
He needs bucking billy ray to show him how to use a saw the right way
😂😂😂😂 merci jetzt weiss ich endlich wie man bei beiden husquarna varianten die ketten sauber tauscht!!! danke profi!
schena gruas
vom laien aus bayern
All respect for sharing this. This does happen and expected. Well done to get them out
hier sieht man schön im direkten Vergleich bei ab und zusammenbau der Schienen mit außen und innenliegendem Kettenrad, daß außenliegendes Kettenrad und Kupplung in (572 XP) einfach das besser/schneller System ist.
Gruß H.M.
Schön dass so etwas auch Profis passiert. Da haben nur noch ein paar schadenfrohe Zuschauer gefehlt. Bitte nicht falsch verstehen, aber trotzdem saubere Arbeit. Du hast scheinbar die Ruhe weg. Ich (als Hobbybaumschubser) hätte mir wahrscheinlich zuerst eine Axt geschnappt und irgendeinen unbeteiligten Baum gefällt, damit ich wieder runter komme ;-)
next time take 3-4 chainsaws for reserve/backup if 2-3 stuck in tree
Fantastic. I have learned so much during last 2 weeks of uncuts. Thank you Austria Forst.
Euer Arbeitsgelände und die damit verbundenen Schwierigkeiten sind immer sehr anspruchsvoll 👍 Interessant zu sehen, wie man aus solchen Situationen einigermaßen gut rauskommt. 👍👍👍
This guy is an Austria "Forstfacharbeiter" he knows more than all off you people saying he´s dumb or not professional, trust me!
LOL.
He makes the exact same mistake over and over again, rather than doing things the correct way. Professional Actor maybe.
You’re funny. If he’s so smart and so professional, then why is he running a Husqvarna?
@@robstone5333 every person who works in the woods got his own favorite chainsaw
@@robstone5333 Stupid Comment
Luggi. You’re absolutely right. I own and operate many saws. About half are Stihl. About a third of them are Husqvarna. There are features I like and dislike about both brands. My comment was meant as good natured kidding. Often the written word fails to convey the intended humor.
You Could have got a third saw stuck in that same spot I'm sure, lol. Gotta hate when bars jam!
Best things are what we learn from are fails ! And you didn’t have to show it either ! Takes more of a person to do that ! Hoo raw ! Fine job
bad karma Day... 😬💪👍
Baaa...da hast sie endlich mit viel Kraft und Zeit raus unten und brennst sie gleich wieder fest 😨 und die zweite auch noch...das ist dir bestimmt noch nie passiert, ? Herlich geflucht und super gelöst das Problem 🖒danke für dieses ehrliche und ungeschnittene Video ,hast das Wochenende verdient 😎
Andy Wenzlaff da muss man wohl immer mit Keile arbeiten man mag Garnichts glauben welche druck und Zuglasten dahinter stecken..
Just Buck a peace out next to it I'm not a logger but that's what the first thing I'd say to do instead of getting close to your other bar
Poor bloody saws. Man you need to get another job . Far away from chainsaws. You will be leaving in a casket otherwise.
How long have you been cutting trees? Two days? First graders, must be.
he is a foratfacharbeiter this means he was taught to do work like this also i bet he knows more about woodcutting than you
No- we all end up in a situation like this! Many factors to consider. . IDK but we try to hurry for a quick fix before someone els sees mistake.
Read a book and let the chainsaw alone.
Have a nice Day baby? ############# Sorry mate But it could have been worse, Great work.
Oida de ganzn scheiß englishsprachign do! Nur mäula zreisn... und den gaunzn tog form computer huka...
Und austria forst... i hob scho peinlichere situationen kopt.
+Fpö! ! Sehr erlich von dir! :)
A refresher course is what you should enrol in. You’re having a bad day due to your lack of knowledge.
This was not mega fail. You saved your equipment.
We all have fallen victim of that end way pressure that pinch you.
Good job.
If this were me I'd title the video "How I Mega Failed with a Husky 572 Uncut".
Looks like he’s cutting a bunch of blow down, it’s more difficult to know where the pressure is at when your logs are laying everywhere! I’ve had days like that
Je me demande bien comment tu as fait pour obtenir ton diplôme de bûcherons
The only failure I see is the operator. He must be showing what NOT to do.
Kkkkkkk
A really misstanke u doing by 2 saw never don it and am å Forrester my self
The more you fu*k it up,the smarter/creative you have to be to solve the fu*k up.
Guy's a genius!!
I had that happen to me once cutting storm damaged trees. Also got two saws stuck after I listened to a team member's suggestion to use the second saw to free the first one and I had wedges in the log. I had the fortune to have another team member nearby who went and got some heavy equipment to lift the log and both saws just fell out.
Definitely been there, now I keep an extra bar and chain for both of my saws. Only takes a couple of minutes to swap out
@@georgeavery7420 Thank you. I do too but the car was far away. If the other person hadn't have seen me down there I would have taken the bars off and left them there until I could get them out
It can only get better.
My friend.
Keep your head up.
Is this video a joke on what not to do?
Good times and bad. Sometimes you eat the bear, other times he eats you. Excellent video. Great skills and an amazing recovery!!
Get you acouple wedges and that’ll never happen again
Oh, so that’s what you do,, when both yer powersaws on sight are stuck in wood..
If you get your chainsaw stuck, and of course, ahem, it's never happened to me, unbolt the bar and move the saw to a safe place and then try to wiggle the bar out. Then re cut the trunk a foot down. You could really damage the saw by trying to wiggle it out by force. The one time it, ahem, never happened to me, I drove home got a new bar and chain and went back.
That ole tree likes chainsaws won't let go.
we all had to start somewhere
Don't look like a pro to me
Sure doesn't ... 🙄
Dont know who taught this guy, but he must have been sleeping during class. Everything he did was totally wrong! Geeeshhhhh!
he didnt make much money that day
You would perhaps benefit from a longer bar and wedges, just a suggestion not an i know better comment
Why you post this video...???
removal by hook from the chewing case by pulling
Wow...
An he's getting paid to fuck all that up..??
Shouldn't let drinks near chainsaws,,,,
I have same situation 2 or 3 times but i i'm 105 kg and jump on this cut log😂
You need to put that phone down and go home and call someone that knows what they're doing
Warum nicht einfach immer näher am Wurzelstock ein zweites mal absägen?
Da hat man weniger Verschleiß als ewig herumzusägen..
Ergänzung:
Und es reicht doch einfach 1/3 einsegen auf der Druckseite und dann erst von der Zugseite..?
Do not include this in your resume. I suppose you could have 6 saws and get the first 5 unpinched but I doubt it sincerely.
Been there know exactly how it feels forester who says he hasn't a blood liar and this is exactly the way to get out of it.
Good video but you boys really had the worst luck that day :))
You should,I mean i would take my saw and go for a nice cold beer and come back some other day and come back with tractor or some other machine and pull those timber away if it's possible.Wish you very best and less of acc,like this,cheers.
how come you do that you should no better cut tree I never been stuck its only agree cut net wear so free saw
What are you going to Try to do next,,, ride a bicycle?
You need tons of practice!
Find a skilled faller to learn from. Or the next tree may be your last.
Cash I can’t believe this is real
Can't believe there isn't more chainsaw related accidents due to inexperience fallers.
If Buckin' Billy Ray falls trees like he bucks yeah I can see the entertainment in it. But I also see the dangers in it too.
I'll do that. Thx
I’m sorry buy buckin billy and this particular individual have absolutely nothing in common, other than the fact they are both on RUclips
This is why you can’t have too many chainsaws 😉
Wasted a lot of time with that one cut. Ever noticed that the log could be cut from the other end to release tension instead fighting like a headless chicken?
Chainsaws sales need to be license only to stop idiots like this .
''I am a professional lumberjack in Austria.'' Profesional ! Really??? you have got to be kidding.
Its try!he is forest rabbit.but not professional
i think you don't really know how it is to cut wood in this region of austria
Luggi hah, you think felling trees in some specific part of Austria is so special that a pro looks like a dumbass? Maybe the pro is really an amateur thinking he is a pro? Usually things are what they seem to be. I am sure if you bring a real pro from any serious foresting country, like Canada, Sweden, Finland, he would not make those beginner mistakes time after time after time. A pro recognizes compression side and cuts accordingly, releasing tension on correct side. Uses wedges if needs, but usually not needed in cases we see here
These guys lack the expertise.They are putting their lives in danger.Give that job to the pros.
Been there and done that.Its one of those "shit happens "kind of things
Entschuldige aber lernt ihr das so in österreich?
I hope this is an instructive video on how NOT to do it..😁
Du bist professioneller Forstarbeiter aus Österreich. ? Wenn ich das sehe sag bitte nicht das du aus Österreich kommst HAHAHAHAHA
Großartig! Danke fürs Teilen. So lernt man in Norddeutschland österreichische Flüche vom Derbsten 😅.
How did he find his way into the woods??????
Why does he keep documenting his screw ups. ??
Not a totally wasted time. What not to do 101.
У нас три пилы в одном оч неудобном дереве застряло, поехали за топором
LOL ( I'm laughing with you )
Hahaha. Damn. I feel really bad for this guy.
Bravo, fai vedere anche i momenti difficili,in un lavoro così duro e pericoloso
Not much one can say about this, except that it happens.
Plastic wedges buddy!
meine Frage? warum hast du nicht zuerst den Lerchen herunter geholt! mfg cc
Also, ich glaube nicht, das Ihr Profis im Umgang mit Kettensägen darstellt.
Ihr wütet einfach drauf los.
So viele Klemmer wie Ihr hat je nicht einmal ein Anfänger.
Würde mich schämen meine Unfähigkeit noch im Video zu zeigen.
Tut mir leid, aber lernt erstmal den Umgang mit einer Kettensäge.
14:37 He said "Orschloch, dreckigs". That means "Dirty asshole" . 🤪👍
Was soll's, so was passiert. Cool, dass Ihr es eingestellt habt.
Es gibt nicht viele so beruhigende Arbeiten draußen wie Ausasten und Ablängen. Am besten alleine und so wies sich halt gehört.
Mit Keile kann man manches machen. Keilen zum Beispiel.
Und der Bohlenschnitt hilft auch.
Wenn dann die aufliegenden Bäume zuerst weg sind sollte das ent..spannter.. gehen.
Please, dont call yourself a professional lumbeejack if you cant read the pinches in the lumber. Always look on the fallen tree how it bends and make a v cut on the inside of the bend and make the final cut from the outside of the bend. And another tip of cutting windfallen trees is to limb it from the bottom to the top and mark where to cut the logs whole limbing. And when you are at the top go back and cut the timber down to the base of the tree. It will get less work at trying to cut loose a chainsaw only to pinch the backup saw. Greetings from Sweden
That was hard to watch. Rooky mistake. Strange way to refit the chain and bar.
The way he put those saws back together at the end? Sorry to all you haters but this guy knows what he’s doing!
What is wrote with you?
5:45 crawls under cut log....
7:45 finally gets out a wedge... and pounds it in... with another wedge... 🤷♂️🤣
Maybe chainsaws aren't your specialty.... 🤓😉👉
Clear cut the world
Wtf 9:00 brauct du 3 motorsäge,🤭🤭🤔
Ja kenn ich . Wenn SCHEISSE dann mit Anlauf 🤣
Wie viele Klugscheisser hier kommentieren... bestimmt nur Sesselfurzer.