Talking to Steve and watching his videos have convinced me to purchase the Advanblack 2 into 1 4 1/2" extended bags (black denim with red pinstripe) along with the new fender extension. He really knows his stuff and demonstrates that the average person can do the install themselves. Once done with these I'll get the JNR Air Ride that he did the demo on too.
Thats awesome man...You will love them and the new look on your scooter. The JNR air is a dream on these bikes compared to the stock ones too. Just being able to adjust on the fly makes it worth it. Plus the customer service over there is amazing. Jason Lawson is a stand up dude. If you need anything else man feel free to call or add me over on FB if you would like. Have a happy new year!!
Steve....Thanks for your video post on Advanblack products and installation. I just purchased 3” extended bags w/ the fender extension. Color matched Big Blue Pearl for my ‘12 SG. I was scratching my head on how to get stock fender extension off and your video made for a quick removal and install of the new extension. I did a lot of research on extended bags and a lot of aftermarket co’s had bad reviews of paint,quality and fit. A coworker suggested to check out Advanblack and I was amazed at all the positive reviews. I chose Advanblack because it was literally the only aftermarket co that offered my color (which is nowadays obsolete). I had a 3 day cluster f*ck trying to place my order but when I finally got on the sites chat,the rep was super helpful and got my order placed. Next day I got a long distance phone call from the rep to double check order and email me confirmation. Super great support. Fit...dead on. Hardware... I know from experience to go over everything which I’m glad I did. Every screw was loose. It happens,but I one by one loctite (Blue),all hardware screws. The material that holds the lids to the bag was too short to my liking so I just swapped in my stock ones. I had also swapped my BBpearl latch handles only cause I personally didn’t like the chrome ones on the colored bags. Paint color match... Dead on,paint quality could be a tad better but it’s only lacking on under edge of lids that you can’t see. Paint seems thin but so far I’m not concerned. Company rep over the phone honored my discount coupon I found online and due to my original order cluster f*ck dude threw in free skid plates! Also I was informed of 3-4 week lead time due to paint,but I was amazed at a 2 1/2 week delivery to my door w no damage from the other side of the planet! I’m a fan of Advanblack and once again thanks for your very informative video on the product. Dutch... Lancaster,Pa.
Awesome video! Thank you very much. I am wanting to extend my rear fender to be flush with stock Electra glide hardbags bottoms, not stretched! on my 03 sportster custom any suggestions as far as product for fender and filler? All I see every where is stretched and extended not just extended. I am aware that because I retro fitted those very large bags onto my 03 sportster that my bag placement will affect length needed for an extended fender. I wouldn't mind have to trim a lil bit off of a bolt on but trying not to have a week of bondo, sanding, and then finally painting. Thank you in advance for any suggestions sir.
Steve, I'm having a problem with the lower part of the bag pushing against the fender extension. Any suggestions on how this could be happening or how to fix it?
Hey Steve I have the same crash bars in front of my bags on my street glide did the hardware (hex nut and bolt) rub on your bags I may have to run to the hardware store and find something smaller
With a 2006 RoadGlide and the luggage rack attachment. Will the fender Advanblack sells for my bike fit, with tour pack mount on ? As you know for that year those mounts sit farther back than the newer bikes.
I have been asking about this for a while as I have the same issue for my Electraglide. The 2 answers I got was to either drill the holes on the Advanblack fender extension to fit the rubber grommet OR there is an tour pack quick detach kit the fits in the FRONT brackets (sissy bar) rather than the back brackets (tour pack). They gave me a link off amazon. I believe it said something in the description about “2 up” those are the only options I found for our years of bikes and I’ve been looking for a while. Good luck in ordering my advanblack stuff soon and going with the offset bracket for now.
Just ordered the stretch bags, stretch fender extension, side panels, and even ordered the saddle bag liners. All in vivid black for 2015 RG Special. The parts can't get here fast enough!! I'm hoping that the quality and fit and finish is worth the extra money I paid instead of going with other after market parts. I also ordered the brackets for centering if needed with my 4" V&H slip on's. Thanks for the vid
Thank you Neil!...if you get everything in and need any help just buzz me on the Advanblack tech support line monday through friday and ill be happy to help you out.
@@sikbaggers Hey Steve thanks for getting back with me. I've got the bags installed and they seem a little loose and shaky down near the bottom around the saddlebag supports. Is there anything I can do to tighten these up?? Also....I ordered the side panels but have decided that I want to keep my rear crash bars instead. Can I send th0se back??
How did you get the plasma rods to work with your bike? You say it rubs the bags a little. Where did you install them on the facia? I may wind up getting the fender extension after all, lol!
Right above the tri bar light is a nut that holds your fender to your fender bracket...loosen it and it will separate the fender from the bracket....dont take it off just loosen. Then slide your extension up all the way and re tighten.
I got a pair of bag lowers and fender extension in Velocity Red (2016 Roadglide) .. Damn the color is a match. Actually better painting on the new bags than on the stock ones. I am impressed. Plus they came with stainless steel reinforcing pieces and wire clips...
Great video! I didn't think it would be a huge deal replacing the rear extension. The only think I wanted to see was removing the nuts on the sides. Thanks for posting this video, it helped me be less anxious about the install.
wish i could find the same thing for an 06 ultra classic and it would have to be capable to keep the tourpack quick release as it's not the same for the 09 and up models
GREAT video my man!!! I am looking to purchase all of that plus the razor tour pack for my 2013 Road Glide and this has been a tremendous help. Keep up the good work.
Great review. Thanks for putting these together. 2 Things. 1.) They are putting the clips in the box now when you buy the extension. 2.) I'm not sure how you got yours to fit because I too have the Custom Dynamcs Tri-bar and it would not fit on the fender extension. The measurement for the mounting screws, bottom mounting flange and light insert holes are all off. I've emailed Advan Black to see what they can do about it. I'll post once I hear back from them.
Glad to hear they are adding clips...I was lucky to have some laying around from the speaker lid install. I did have to fan dangle the tri bar light quite a bit to get it to fit. there was more time put into that than actually getting this on. I put the base in...then moved my way up pushing each fin int he slot and then put the screws in just barley...Had to hold the fins in the slots and tighen it down slowly so the base wouldnt pop out. it was a tight fit on the fins. But I also talked to the dude that makes the custom dynamics tri bar light and he said its an exact replica of the harley light on the outside. I did not get mine out of the box to check that because I already had mine on. Some other customers had that same issue though. Like I said I spent a lot of time getting it on...just took some patience.
Steven Housden you just saved me a ton of money! Thanks for the great video's on this AdvanBlack product line. Was looking at the saddle bags online and they are actually offering my paint color (Laguna Orange WITH the factory style pinstripe). Fantastic!! Was about to order the fender extension when I spotted a NEW item......a CVO style rear fender w/fender extension and the LED lights fully assembled. I will be ordering as well. Major win win!! Thanks again for all the video's on these products going to be a fun winter I am thinking!
Hey Scott thats awesome man....I have the CVO fender coming very soon and will update with a new video as soon as I get it on. Look for the side covers coming soon too! Thanks for checking out the vids bro. Ride safe!!
Hi Steve I have just about every up grade from Adavan black and have always used your videos for reference on how to. The extended fender is the only one I haven't purchased yet do to having the plasma lights and I love them and don't want to lose them. So my question is, if I do the rear extension, is it completely impossible to keep my lights ? Have you found a way to put your plasmas back on ? Thank you
I ran them for 2 years on there. The sides will rub the bags a little but I purchased some 3m clear adhesive and it stopped it from rubbing the paint. Worked great and they fit with no issues.
yes it is going to the light bar...there is only one cable that runs along that one side. There are two wires from it for each side of the tri bar light.
That's awesome! Love this and the stretched bags Advan Black makes. Only issue for me is that I have a 2013 Street Glide in Harley's Yellow Chrome Pearl. Advan Black doesn't make that color. Any suggestions?
Man my neighbor has that exact same bike....he can never find parts that match...He ordered some last year, cant remember where but they were a disappointment...the color was more orange and it stuck out bad...Its a cool color but I havent seen anyone match it yet
no the facia lights are made for the stock extension from them and ciro so they wont work...I did put the plasma rods on this bike, this video is old..I still have them on there...slightly rubs the bags but where you cannot see it so it didn't matter to me.
@@sikbaggers Thanks, you are the first person that actually knows the answer to my question. The extended fender appears different and I wasn't sure if the lights would fit. I appreciate your quick reply.
I've watched a couple videos and appreciate it...I would be interested in at the end of your videos seeing like a split view of like a before and after.... either way I subbed and liked, keep 'em coming
Hey Wally thanks man. I appreciate that very much. Yes I had thought about incorporating that idea into the new videos coming up. I always think about taking a before picture and then I forget. But that is something I want to start doing. Thanks again for the sub my friend. Have a happy New Year!
I've been irritated with my set since I got them in like 16. I had no problems getting my exhaust centered thanks to your video. The issue with mine is the arch between the fender extension and bag dont line up, the bag sits about 1/4" higher then the extension. If I remove the rubber grommets under the bags completely it sits even. Any ideas?
yeah that is strange man...I would try removing the rear and cutting two of those rubber down like a shim. Mount the shim on the side of the rail, slightly down like the 7 oclock position on the left and the 4 oclock position on the right...this will keep rubber in there so there is no vibration and also allow you to move the bag down to meet up with your extension.
Hey Steve I have this fender from Advanblack on my roadking and i've noticed that the oem bags on the roadking special 2022 is scraping the side of the panels, any suggestions?
You would probably have to shim out your bags a little if they are touching. here is an old video I shot showing how to shim your bags iun the back...ive started it at about the area you will need to watch, when you click on it. ruclips.net/video/8wPMal80gMo/видео.html
absolutely not...if anything you have more issues with air ride as you tend to ride lower than stock height and scrape your bags...guys run stretched bags all the time with normal shocks and kickstand.
@@sikbaggers thanks. I’m a builder on a budget. I do one project at a time. I would like to get the stretched bags and the fender extension soon. Chopped tour pack to follow.
2009 to 2021 rear fender are the same.,.the 2008 and older are much more narrow and smaller. You will need to find an extension that fits on 08 and older touring model. A fender overlay is also a viable option for older bikes.
yes sir...i always loctite blue on the sled...its easy to remove if needed. Sometimes I have had to use a little heat to get it to loosen but it works great. Just a dab will do ya! :)
Kind of late but what how wide is the gap between the fender extension to the bags? I heard you say your running 4 inch pipes I'm guessing about 6 inches.
Ra A i am running 4 but 4.5 will work. You will need to do the rubber mod on the bottom I show in my other video. How to get clean lines on your bags and fender extension. There is roughly 5 inches to play with if you do the mod.
yes there was but the issue has been fixed...I sent images to them and it was only because the paint was thick in that area. They have trimmed some out so when it is painted it is back to regular size. I called Custom Dynamics to see if their tri light was the same as the stock on and they said it was on the outside. So I think the issue would have been with the CD light or the stock light. But the issue has been addressed. I have installed 7 of these since then with no issues.
I bougnt a Tri Bar light on Aliexpress for $24.00 free shipping and it arrived in 4days. Why because this vender had an outlet in Cali. It funtions just like Dynamic's Tribar light which is made in China. Just my thought....always looking to save money on things that are priced way to high for what the product is.Cool saddle bags Steve
Love your videos, I recently lost one of my stock bags on the highway and it got crushed. My new AdvanBlack stretched bags and stretched finder came in the mail. Color is perfect! Question: how do you adjust the pipes so they are not touching the bags?
Thank you man...I appreciate that. Adjusting your slip ons is pretty easy...right where they connect to the header...loosen that bolt and twist them...one way makes them go in and the other way makes them go out...it doesnt take much..it helps if you have someone eyeballing them while you twist. get them where you want them and tighten them down. Let me know if you need anything else man.
Steve good video as always. Buyers beware though. The Road Glide Ultra is a completely different fender and doesn't have the 3 studs on either side of the fender to mount this extension too. Best solution I can come up with is to swap the Road Glide fender out for a Street glide fender :(
I have the HD antenna relocation kit on mine...but there are ways to flip your antenna bracket and bend and run your antenna down the frame of your bike. This guy here does it ruclips.net/video/ks7NoK0A1GA/видео.html
The bags are just removed via the 2 retaining pins on the inside of your bike...twist and remove..the fender extension is a bit more detailed but I do have a walk through video for that as well.
Just installed Advanblack extended bags and fender extension on my 2013 Street Glide. I run 4-1/2 Rinehart slip-ons and the fit was great. Everything lined up as expected and the quality is quite good. My only question is, the old bag lids have a couple of metal clips that hook on the bike to clamp the lid. Not sure if I need to remove and mount onto the new lids, and if so, not sure how their mounted. Anyone else see this?
You could take the plasma bars and re mount them using sticky tape on the back and not the sides. They stick to the sides of your fender extension now. I thought about peeling off the tape that is there and using gorilla double sided sticky tape and re mounting them kinda right in the crack maybe but use the back of the bar and not the side. I have messed around with it just placing them up there. But I have a razor tour pack coming tomorrow and I want to see if I can mount them to the bottom of it. I like the extra brake lights back there so I will figure out something. Let me know if you come up with a solution.
I have done the tour pack and it is on my channel...although I havent figured a way to run the wires just yet so they are not showing...and also to use delphi clips to make the wires detachable if I need to take it off. I dont plan on it but someday I may need to. Will have to put some time into thinking about this. Once I get something figured out I will upload a new video.
Steve - thanks for the great video. I bought the AdvanBlack extensions for my 2017 RGS (including the fender extension) and they look great. Your instructions made it easy!
as long as your EG is a 09 to 19 the rear fender is the same...the answer is kind of long winded so bare with me. It really all depeneds on what you have going on back there...for mounting the fender you just mock it up on there and hold it in place with painters tape(thats whatwe use) mark your 3 holes on each side. punch and drill the 3 holes, add 1/4 - 20 bolts with nylock nuts. Now that its installed you will need to address adding the tri bar light. You can pick one of just about anywhere from 45 to 400 bucks...you have to then determine what connector your, if any, that your bike has up near your rear brake light and tap into that. There are other variables that come into play as well depending on what your bike has...rear bumper at bottom of fender? what style lights you have ?
@@RKnoll74 whatch this newer video here and see how I instead the extension on this road king. I used a 9/32....but it just depends on what bolts your putting in
Brian Vickers wont work... i ordered them and found out RKs dont have the bolt holes on the fender... my only options are to swap for a RG/SG fender or drill the holes
Steven would the fender extension with the Saddlebags fit my CFR 4.5” diameter exhaust? How is the quality of the fender ext and bags as I only need the bottoms
Hey Joe... The bags will fit if you follow these tips here in my other video ruclips.net/video/8wPMal80gMo/видео.html the quality is the same as your OEM bags and fender you have now ...and the paint is dead on. The method I show you in the other video has worked for a ton of guys running 4 and 4.5 inch exhaust.
Steven Housden thank you I will take a look at your other video. I Haven’t bought the bags or fender kit yet...just doing my research before I decide on which company and brand I want to buy
Cool man. I have a bunch of videos on their stuff. I was sold after getting my first thing from them which was the speaker lids. As of now I have the lids, bags, extension, lowers with speaker pods, inner fairing and LED headlight .been great so far...Plus the customer service is top notch man ,,,have an issue and they care of it no questions asked. Thats worth it weight in gold these days. Let me know what you end up going with...I do service tech for them as well so if you end up with these and need any help you can give me a call
The rear fender of all these from 09 to 20 are the same so technically the fender extension will fit your bike. However You will have to drill the fender for the 3 holes that holds it on, add the tri bar light and hard wire that in, and if you have a fender light on there now, remove it but you will have a hole behind it for the wire . I've seen guys move their plate down and fab a way to add to cover the hole. It's the same extension just more work on your end. I have a video where j show adding a fender extension to a road king ...it the same thing.
will i have a problem installing the advan black 4.5 stretched saddlebags and extended fender ihave full rinehart exhaust system with 4 1/2 slip ons its a 2017 streetglide 107
Hey Michael We install the bags with 4.5's all the time...You will need to use the provided rubber shim to push the bag out a tad to get the clearance you need for the 4.5 exhaust. If you are on FB please check out our review page here facebook.com/groups/540108136191429/?ref=bookmarks there are lots of pics with guys running 4.5 exhaust. Any questions please let me know.
Just wondering if Advanblack is giving you anything for doing these videos? If they aren't then they should. Anyway, thanks for the video because I bought a set of Advanblack's stretched bags and was wondering about the fender extensions.
Thank you for checking out the video...Im glad it helped you. I ran the bags without the fender extension for a few months and it definitely looks better with it, in my opinion..just looks more complete to me. I have a tips and tricks video that helps get them lined up as well. Be sure to check out the channel and sub to be notified of new videos...some new parts coming out very soon! Be safe!!
Are you talking about the tri bar light wires? I am assuming so since that is the only wires on this...It is very simple. There is a plug on each side and on that p[lug is a clip. Just use your thumbnail and pull the clip away from the light slightly and it will release the clip then just pull the wire out. Let me know if this is what you were talking about please.
ive ran extended bags for 2 years and never scraped but I adjust my riding so that I dont. You have to lean pretty hard to get them to scrape...if you are not scraping your floorboards now then you wont scrape your bags. Its always a good idea to add some bag skid plates just in case though...you never know.
its always a good idea to get some bag protection just in case though. A 40 dollar investment may save you a huge headache down the road. Advan sells the skid plates ..I always tell people that you cant always control the situation. I've seen dudes turn a hard 90 right and curb the bottom of the bags..not on the road but on an actual curb. Its small investment to protect your very expensive investment.
Yes sir but you must follow this mod to do it here in m y other video...ruclips.net/video/8wPMal80gMo/видео.html This will give you a cleaner line and also give you the extra 1/2 inch you need for the 4.5's I run 4 inch and still do this mod...its just a cleaner look.
I actually put it back on. The cvo fender was just for the demo and hot to video. Its just not my style to be honest. I like the look of this fender extension better than the cvo.
yes its the same rear on all touring models...If you do not have a fender extension now you can add this as its the same width as street glides and road glides.
Yes sir it is the same fender. You will have to decide on a way to attach the extension since your bike doesnt have the pre existing holes for the mounting bolts. We put the extension in place, mark the holes, drill and add 1/4 - 20 bolts and nyloc nuts. The standard is 3 holes down each side. You can also use Gorilla double sided sticky tape as well...the full length of the extension.
It works pretty good man..I dont use the radio much...we have a 64gb thumb drive we use. Its a bit pricey, If i was doing it again I would just flip my antenna over and run it along the frame. We have done that to about 20 bikes and it works pretty decent. This dude has a good video for it, ruclips.net/video/ks7NoK0A1GA/видео.html
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
Talking to Steve and watching his videos have convinced me to purchase the Advanblack 2 into 1 4 1/2" extended bags (black denim with red pinstripe) along with the new fender extension. He really knows his stuff and demonstrates that the average person can do the install themselves. Once done with these I'll get the JNR Air Ride that he did the demo on too.
Thats awesome man...You will love them and the new look on your scooter. The JNR air is a dream on these bikes compared to the stock ones too. Just being able to adjust on the fly makes it worth it. Plus the customer service over there is amazing. Jason Lawson is a stand up dude. If you need anything else man feel free to call or add me over on FB if you would like. Have a happy new year!!
That’s what I am seeing now also. Thanks for the reply.
Steve....Thanks for your video post on Advanblack products and installation. I just purchased 3” extended bags w/ the fender extension. Color matched Big Blue Pearl for my ‘12 SG. I was scratching my head on how to get stock fender extension off and your video made for a quick removal and install of the new extension. I did a lot of research on extended bags and a lot of aftermarket co’s had bad reviews of paint,quality and fit. A coworker suggested to check out Advanblack and I was amazed at all the positive reviews. I chose Advanblack because it was literally the only aftermarket co that offered my color (which is nowadays obsolete). I had a 3 day cluster f*ck trying to place my order but when I finally got on the sites chat,the rep was super helpful and got my order placed. Next day I got a long distance phone call from the rep to double check order and email me confirmation. Super great support.
Fit...dead on. Hardware...
I know from experience to go over everything which I’m glad I did. Every screw was loose. It happens,but I one by one loctite (Blue),all hardware screws. The material that holds the lids to the bag was too short to my liking so I just swapped in my stock ones. I had also swapped my BBpearl latch handles only cause I personally didn’t like the chrome ones on the colored bags. Paint color match...
Dead on,paint quality could be a tad better but it’s only lacking on under edge of lids that you can’t see. Paint seems thin but so far I’m not concerned.
Company rep over the phone honored my discount coupon I found online and due to my original order cluster f*ck dude threw in free skid plates!
Also I was informed of 3-4 week lead time due to paint,but I was amazed at a 2 1/2 week delivery to my door w no damage from the other side of the planet!
I’m a fan of Advanblack and once again thanks for your very informative video on the product.
Dutch... Lancaster,Pa.
Awesome video! Thank you very much. I am wanting to extend my rear fender to be flush with stock Electra glide hardbags bottoms, not stretched! on my 03 sportster custom any suggestions as far as product for fender and filler? All I see every where is stretched and extended not just extended. I am aware that because I retro fitted those very large bags onto my 03 sportster that my bag placement will affect length needed for an extended fender. I wouldn't mind have to trim a lil bit off of a bolt on but trying not to have a week of bondo, sanding, and then finally painting. Thank you in advance for any suggestions sir.
Steve, I'm having a problem with the lower part of the bag pushing against the fender extension. Any suggestions on how this could be happening or how to fix it?
Hey Steve I have the same crash bars in front of my bags on my street glide did the hardware (hex nut and bolt) rub on your bags I may have to run to the hardware store and find something smaller
With a 2006 RoadGlide and the luggage rack attachment. Will the fender Advanblack sells for my bike fit, with tour pack mount on ? As you know for that year those mounts sit farther back than the newer bikes.
I have been asking about this for a while as I have the same issue for my Electraglide. The 2 answers I got was to either drill the holes on the Advanblack fender extension to fit the rubber grommet OR there is an tour pack quick detach kit the fits in the FRONT brackets (sissy bar) rather than the back brackets (tour pack). They gave me a link off amazon. I believe it said something in the description about “2 up” those are the only options I found for our years of bikes and I’ve been looking for a while. Good luck in ordering my advanblack stuff soon and going with the offset bracket for now.
Just ordered the stretch bags, stretch fender extension, side panels, and even ordered the saddle bag liners. All in vivid black for 2015 RG Special. The parts can't get here fast enough!! I'm hoping that the quality and fit and finish is worth the extra money I paid instead of going with other after market parts. I also ordered the brackets for centering if needed with my 4" V&H slip on's. Thanks for the vid
Thank you Neil!...if you get everything in and need any help just buzz me on the Advanblack tech support line monday through friday and ill be happy to help you out.
@@sikbaggers ok thanks man!
@@sikbaggers Hey Steve thanks for getting back with me. I've got the bags installed and they seem a little loose and shaky down near the bottom around the saddlebag supports. Is there anything I can do to tighten these up?? Also....I ordered the side panels but have decided that I want to keep my rear crash bars instead. Can I send th0se back??
How did you get the plasma rods to work with your bike? You say it rubs the bags a little. Where did you install them on the facia? I may wind up getting the fender extension after all, lol!
Love the video..have a 16 Road Glide special..i can't seem to close the 1/8" gap were the extention meets the fender
Right above the tri bar light is a nut that holds your fender to your fender bracket...loosen it and it will separate the fender from the bracket....dont take it off just loosen. Then slide your extension up all the way and re tighten.
@@sikbaggers thanks brother for the help..looks AWESOME!
I got a pair of bag lowers and fender extension in Velocity Red (2016 Roadglide) .. Damn the color is a match. Actually better painting on the new bags than on the stock ones. I am impressed. Plus they came with stainless steel reinforcing pieces and wire clips...
Hey Lanc...Yeh man I love everything I got from them....5 of my buddies all running advanblack now too..No issues on any of their products
Great video! I didn't think it would be a huge deal replacing the rear extension. The only think I wanted to see was removing the nuts on the sides. Thanks for posting this video, it helped me be less anxious about the install.
Hey Kevin...glad it helped man...and remember you can always call me on the advan service tech number listed on the website if you need anything
wish i could find the same thing for an 06 ultra classic and it would have to be capable to keep the tourpack quick release as it's not the same for the 09 and up models
GREAT video my man!!! I am looking to purchase all of that plus the razor tour pack for my 2013 Road Glide and this has been a tremendous help. Keep up the good work.
Thank you very much....much appreciated!
Thank you Steve my rear speakers came out awesome thanks for the help can’t wait to start on my bags
Great review. Thanks for putting these together. 2 Things. 1.) They are putting the clips in the box now when you buy the extension. 2.) I'm not sure how you got yours to fit because I too have the Custom Dynamcs Tri-bar and it would not fit on the fender extension. The measurement for the mounting screws, bottom mounting flange and light insert holes are all off. I've emailed Advan Black to see what they can do about it. I'll post once I hear back from them.
Glad to hear they are adding clips...I was lucky to have some laying around from the speaker lid install. I did have to fan dangle the tri bar light quite a bit to get it to fit. there was more time put into that than actually getting this on. I put the base in...then moved my way up pushing each fin int he slot and then put the screws in just barley...Had to hold the fins in the slots and tighen it down slowly so the base wouldnt pop out. it was a tight fit on the fins. But I also talked to the dude that makes the custom dynamics tri bar light and he said its an exact replica of the harley light on the outside. I did not get mine out of the box to check that because I already had mine on. Some other customers had that same issue though. Like I said I spent a lot of time getting it on...just took some patience.
Steven Housden what is the number to advan black
Hey Charlie I have never called it but on the website it says 1(530)867-9667
Steven Housden you just saved me a ton of money! Thanks for the great video's on this AdvanBlack product line. Was looking at the saddle bags online and they are actually offering my paint color (Laguna Orange WITH the factory style pinstripe). Fantastic!! Was about to order the fender extension when I spotted a NEW item......a CVO style rear fender w/fender extension and the LED lights fully assembled. I will be ordering as well. Major win win!! Thanks again for all the video's on these products going to be a fun winter I am thinking!
Hey Scott thats awesome man....I have the CVO fender coming very soon and will update with a new video as soon as I get it on. Look for the side covers coming soon too! Thanks for checking out the vids bro. Ride safe!!
Have you considered the Custom Dynamics FASCIA LED PANELS FOR 2014-2020 FLHX, FLTRX & FLHRS?
Did the plasma bars fit with the fender extension?
Hi Steve I have just about every up grade from Adavan black and have always used your videos for reference on how to. The extended fender is the only one I haven't purchased yet do to having the plasma lights and I love them and don't want to lose them. So my question is, if I do the rear extension, is it completely impossible to keep my lights ? Have you found a way to put your plasmas back on ? Thank you
I ran them for 2 years on there. The sides will rub the bags a little but I purchased some 3m clear adhesive and it stopped it from rubbing the paint. Worked great and they fit with no issues.
The cable that you have tucked is going to light bar? So there is another along other side? Or is the cable associated with the speakers in your bags?
yes it is going to the light bar...there is only one cable that runs along that one side. There are two wires from it for each side of the tri bar light.
That's awesome! Love this and the stretched bags Advan Black makes. Only issue for me is that I have a 2013 Street Glide in Harley's Yellow Chrome Pearl. Advan Black doesn't make that color. Any suggestions?
Man my neighbor has that exact same bike....he can never find parts that match...He ordered some last year, cant remember where but they were a disappointment...the color was more orange and it stuck out bad...Its a cool color but I havent seen anyone match it yet
Will the Custom Dynamics Facia lights work with the fender extension? I see you state that your Plasma bars no longer fit, how about facia lights?
no the facia lights are made for the stock extension from them and ciro so they wont work...I did put the plasma rods on this bike, this video is old..I still have them on there...slightly rubs the bags but where you cannot see it so it didn't matter to me.
@@sikbaggers Thanks, you are the first person that actually knows the answer to my question. The extended fender appears different and I wasn't sure if the lights would fit. I appreciate your quick reply.
I've watched a couple videos and appreciate it...I would be interested in at the end of your videos seeing like a split view of like a before and after.... either way I subbed and liked, keep 'em coming
Hey Wally thanks man. I appreciate that very much. Yes I had thought about incorporating that idea into the new videos coming up. I always think about taking a before picture and then I forget. But that is something I want to start doing. Thanks again for the sub my friend. Have a happy New Year!
How do I install the extension fender for my 06 roadking
I've been irritated with my set since I got them in like 16. I had no problems getting my exhaust centered thanks to your video. The issue with mine is the arch between the fender extension and bag dont line up, the bag sits about 1/4" higher then the extension. If I remove the rubber grommets under the bags completely it sits even. Any ideas?
yeah that is strange man...I would try removing the rear and cutting two of those rubber down like a shim. Mount the shim on the side of the rail, slightly down like the 7 oclock position on the left and the 4 oclock position on the right...this will keep rubber in there so there is no vibration and also allow you to move the bag down to meet up with your extension.
@@sikbaggers if I remove the rubber grommet from the bottom of the bag to set the bag directly on the bar it doesn't clear the shock.
Hey Steve I have this fender from Advanblack on my roadking and i've noticed that the oem bags on the roadking special 2022 is scraping the side of the panels, any suggestions?
You would probably have to shim out your bags a little if they are touching. here is an old video I shot showing how to shim your bags iun the back...ive started it at about the area you will need to watch, when you click on it. ruclips.net/video/8wPMal80gMo/видео.html
Yes. that is what I was talking about. This was not shown on the video
Will I have any problems running the stretched bags and fender extension, if I don’t have air ride?
absolutely not...if anything you have more issues with air ride as you tend to ride lower than stock height and scrape your bags...guys run stretched bags all the time with normal shocks and kickstand.
@@sikbaggers thanks. I’m a builder on a budget. I do one project at a time. I would like to get the stretched bags and the fender extension soon. Chopped tour pack to follow.
@@sikbaggers do I order from you or from advanblack.com?
Sir~ is the 2008 & 2013 SG rear fender the same ? And does the 2014-2021 SG rear fender fit on a 2008 SG？ Thank you
2009 to 2021 rear fender are the same.,.the 2008 and older are much more narrow and smaller. You will need to find an extension that fits on 08 and older touring model. A fender overlay is also a viable option for older bikes.
Hi Steve did you use blue loc tite on the re-install? I know these Harley’s like to vibrate a lot that’s why I’m asking
yes sir...i always loctite blue on the sled...its easy to remove if needed. Sometimes I have had to use a little heat to get it to loosen but it works great. Just a dab will do ya! :)
Kind of late but what how wide is the gap between the fender extension to the bags? I heard you say your running 4 inch pipes I'm guessing about 6 inches.
Ra A i am running 4 but 4.5 will work. You will need to do the rubber mod on the bottom I show in my other video. How to get clean lines on your bags and fender extension. There is roughly 5 inches to play with if you do the mod.
Have seen or heard of any issues with the Custom Dynamics Tribar light not fitting the extended fender ?
yes there was but the issue has been fixed...I sent images to them and it was only because the paint was thick in that area. They have trimmed some out so when it is painted it is back to regular size. I called Custom Dynamics to see if their tri light was the same as the stock on and they said it was on the outside. So I think the issue would have been with the CD light or the stock light. But the issue has been addressed. I have installed 7 of these since then with no issues.
I bougnt a Tri Bar light on Aliexpress for $24.00 free shipping and it arrived in 4days. Why because this vender had an outlet in Cali. It funtions just like Dynamic's Tribar light which is made in China. Just my thought....always looking to save money on things that are priced way to high for what the product is.Cool saddle bags Steve
Love your videos, I recently lost one of my stock bags on the highway and it got crushed. My new AdvanBlack stretched bags and stretched finder came in the mail. Color is perfect!
Question: how do you adjust the pipes so they are not touching the bags?
Thank you man...I appreciate that. Adjusting your slip ons is pretty easy...right where they connect to the header...loosen that bolt and twist them...one way makes them go in and the other way makes them go out...it doesnt take much..it helps if you have someone eyeballing them while you twist. get them where you want them and tighten them down. Let me know if you need anything else man.
Another great video! Does the fender extension play well with 2018 OEM extended bags? Thanks.
Steve good video as always. Buyers beware though. The Road Glide Ultra is a completely different fender and doesn't have the 3 studs on either side of the fender to mount this extension too. Best solution I can come up with is to swap the Road Glide fender out for a Street glide fender :(
Steve dumb question where did you run or hide your antenna wire with the new fender extension
I have the HD antenna relocation kit on mine...but there are ways to flip your antenna bracket and bend and run your antenna down the frame of your bike. This guy here does it ruclips.net/video/ks7NoK0A1GA/видео.html
.
Hey Steve how do you remove the bags? Looking to order the amber whiskey bags and fender extension
The bags are just removed via the 2 retaining pins on the inside of your bike...twist and remove..the fender extension is a bit more detailed but I do have a walk through video for that as well.
@@sikbaggers thank you, what's the title to that video I'll go watch it
Just installed Advanblack extended bags and fender extension on my 2013 Street Glide. I run 4-1/2 Rinehart slip-ons and the fit was great. Everything lined up as expected and the quality is quite good. My only question is, the old bag lids have a couple of metal clips that hook on the bike to clamp the lid. Not sure if I need to remove and mount onto the new lids, and if so, not sure how their mounted. Anyone else see this?
Steve Williamson please send me an email with a picture of what your talking about .. We will get it worked out. slhousden@gmail.com
is there any way to make the plasma rods work? thats my only brake lights i have
You could take the plasma bars and re mount them using sticky tape on the back and not the sides. They stick to the sides of your fender extension now. I thought about peeling off the tape that is there and using gorilla double sided sticky tape and re mounting them kinda right in the crack maybe but use the back of the bar and not the side. I have messed around with it just placing them up there. But I have a razor tour pack coming tomorrow and I want to see if I can mount them to the bottom of it. I like the extra brake lights back there so I will figure out something. Let me know if you come up with a solution.
sounds good. make a video on the advanblack tour pak..
I have done the tour pack and it is on my channel...although I havent figured a way to run the wires just yet so they are not showing...and also to use delphi clips to make the wires detachable if I need to take it off. I dont plan on it but someday I may need to. Will have to put some time into thinking about this. Once I get something figured out I will upload a new video.
Steve - thanks for the great video. I bought the AdvanBlack extensions for my 2017 RGS (including the fender extension) and they look great. Your instructions made it easy!
Hey Steve, I have an ElectraGlide that doesn't have the fender bolts for the extension , how do you make it work?
as long as your EG is a 09 to 19 the rear fender is the same...the answer is kind of long winded so bare with me. It really all depeneds on what you have going on back there...for mounting the fender you just mock it up on there and hold it in place with painters tape(thats whatwe use) mark your 3 holes on each side. punch and drill the 3 holes, add 1/4 - 20 bolts with nylock nuts. Now that its installed you will need to address adding the tri bar light. You can pick one of just about anywhere from 45 to 400 bucks...you have to then determine what connector your, if any, that your bike has up near your rear brake light and tap into that. There are other variables that come into play as well depending on what your bike has...rear bumper at bottom of fender? what style lights you have ?
@@sikbaggers What bit size do you recommend for drilling the holes?
@@RKnoll74 whatch this newer video here and see how I instead the extension on this road king. I used a 9/32....but it just depends on what bolts your putting in
Please explain to me how these mount to a 2015 road king.
Brian Vickers wont work... i ordered them and found out RKs dont have the bolt holes on the fender... my only options are to swap for a RG/SG fender or drill the holes
What air shocks / compressor are you using?
I'm running JNR air..100cc compressor
Steven would the fender extension with the Saddlebags fit my CFR 4.5” diameter exhaust? How is the quality of the fender ext and bags as I only need the bottoms
Hey Joe... The bags will fit if you follow these tips here in my other video ruclips.net/video/8wPMal80gMo/видео.html the quality is the same as your OEM bags and fender you have now ...and the paint is dead on. The method I show you in the other video has worked for a ton of guys running 4 and 4.5 inch exhaust.
Steven Housden thank you I will take a look at your other video. I Haven’t bought the bags or fender kit yet...just doing my research before I decide on which company and brand I want to buy
Cool man. I have a bunch of videos on their stuff. I was sold after getting my first thing from them which was the speaker lids. As of now I have the lids, bags, extension, lowers with speaker pods, inner fairing and LED headlight .been great so far...Plus the customer service is top notch man ,,,have an issue and they care of it no questions asked. Thats worth it weight in gold these days. Let me know what you end up going with...I do service tech for them as well so if you end up with these and need any help you can give me a call
Do they make fender extensions for 2016 ultra limited?
The rear fender of all these from 09 to 20 are the same so technically the fender extension will fit your bike. However You will have to drill the fender for the 3 holes that holds it on, add the tri bar light and hard wire that in, and if you have a fender light on there now, remove it but you will have a hole behind it for the wire . I've seen guys move their plate down and fab a way to add to cover the hole. It's the same extension just more work on your end. I have a video where j show adding a fender extension to a road king ...it the same thing.
will i have a problem installing the advan black 4.5 stretched saddlebags and extended fender ihave full rinehart exhaust system with 4 1/2 slip ons its a 2017 streetglide 107
Hey Michael We install the bags with 4.5's all the time...You will need to use the provided rubber shim to push the bag out a tad to get the clearance you need for the 4.5 exhaust. If you are on FB please check out our review page here facebook.com/groups/540108136191429/?ref=bookmarks there are lots of pics with guys running 4.5 exhaust. Any questions please let me know.
Just wondering if Advanblack is giving you anything for doing these videos? If they aren't then they should. Anyway, thanks for the video because I bought a set of Advanblack's stretched bags and was wondering about the fender extensions.
Thank you for checking out the video...Im glad it helped you. I ran the bags without the fender extension for a few months and it definitely looks better with it, in my opinion..just looks more complete to me. I have a tips and tricks video that helps get them lined up as well. Be sure to check out the channel and sub to be notified of new videos...some new parts coming out very soon! Be safe!!
Can you show the wire disconnect and connect process?
Are you talking about the tri bar light wires? I am assuming so since that is the only wires on this...It is very simple. There is a plug on each side and on that p[lug is a clip. Just use your thumbnail and pull the clip away from the light slightly and it will release the clip then just pull the wire out. Let me know if this is what you were talking about please.
is it going to be ok if the hard bags are touching the advanblack fender extension because mine are and have no way on adjusting them 2019 FLHXS
They should not be touching...please call me on the advan service line here (618)3054324 when you get a chance..
How easy is it to scrape up the extended bags in a corner
ive ran extended bags for 2 years and never scraped but I adjust my riding so that I dont. You have to lean pretty hard to get them to scrape...if you are not scraping your floorboards now then you wont scrape your bags. Its always a good idea to add some bag skid plates just in case though...you never know.
Where are you running the antenna ??
check out my other video here...relocate it or get the hidden one from HD...hes the how to video I did for it ruclips.net/video/bM3M1bopUvA/видео.html
Can you run the extended bags and fender on stock height 2014 streetglide special suspension
yeah,,,I run about an inch and half lower with my air ride and never drag.
Steven Housden alright sweet just wanted to make sure I wouldn’t drag or scrap cornering the bike
its always a good idea to get some bag protection just in case though. A 40 dollar investment may save you a huge headache down the road. Advan sells the skid plates ..I always tell people that you cant always control the situation. I've seen dudes turn a hard 90 right and curb the bottom of the bags..not on the road but on an actual curb. Its small investment to protect your very expensive investment.
Steven Housden very true thank you for the insight and knowledge you share it saves a lot of headache on my end
Would you give the link for those wire clips
Advan is now adding these exact wire clips in the box but if you need more I got them from amazon here www.amazon.com/gp/product/B005MN2QHK
Will this outfit fit the 4inch pipes
Sorry I am running a 4.5 inch pipe
Yes sir but you must follow this mod to do it here in m y other video...ruclips.net/video/8wPMal80gMo/видео.html This will give you a cleaner line and also give you the extra 1/2 inch you need for the 4.5's I run 4 inch and still do this mod...its just a cleaner look.
I see you removed yours for a CVO fender you want to sell your old one ? If it will fit my 2017 mine is denim grey and flat black. I can panit it.
I actually put it back on. The cvo fender was just for the demo and hot to video. Its just not my style to be honest. I like the look of this fender extension better than the cvo.
You could have just added another wire clip above or below the one you left empty and just left it there, that's what I did.
After installing about 100 of these, one is plenty to hold that wire. Its taught enough its not going anywhere.
Does it fit 2016 road king
yes its the same rear on all touring models...If you do not have a fender extension now you can add this as its the same width as street glides and road glides.
Would this fit a 2016 CVO ultra limited?
Yes sir it is the same fender. You will have to decide on a way to attach the extension since your bike doesnt have the pre existing holes for the mounting bolts. We put the extension in place, mark the holes, drill and add 1/4 - 20 bolts and nyloc nuts. The standard is 3 holes down each side. You can also use Gorilla double sided sticky tape as well...the full length of the extension.
What did you use as a antenna
I have the hidden antenna from Harley Davidson in the fairing.
Steven Housden how is it, I keep hearing to go to a Boat store and buy a Marine one, and the bike is beautiful
It works pretty good man..I dont use the radio much...we have a 64gb thumb drive we use. Its a bit pricey, If i was doing it again I would just flip my antenna over and run it along the frame. We have done that to about 20 bikes and it works pretty decent. This dude has a good video for it, ruclips.net/video/ks7NoK0A1GA/видео.html
Love the videos but damn I hate the rubber glove trend today
Thanks man....Yea I wear them sometimes as im sick of waxing fingerprints off my bike every time I work on it.
Don’t do it if you ever get it delivered it’s garbage
the fender extension is garbage? Weird..its made identical to the OEM one but stretched. What was the issue?
Hope u never have to repair your tire :p
lol...well I dont understand about the rear tire...its just as easy to get to as it was before.