A note to those completing this task. Be careful with installing the separation pad. Watch the video closely. If you try to push it back in too low you'll snap the location tabs off. Lift it into the location holes. Pushing it down at the back helps with this process of alignment. I also found a flashlight invaluable when doing this repair.
The ADF in your video looks very much like my LaserJet PRO MFP M225. I try to scan to USB via the ADF, but nothing happens. The error reads Load Feeder. I already have paper on the feeder. I cleaned all the rollers and the separation pad with distilled water. All the rollers turn freely when I move them with my finger. Do you think I need a new sensor? Where is the sensor located? How much is it?
patenin büyük olan kısmın lastiğini ters çevirdiğin vakit daha verimli hale geliyor eğer tarama esnasında kağıdı çekmekte zorluk oluyorsa bende aynı yazıcı var.. bilginize
The HP Color Laserjet MFP M477 has exit rollers in the ADF when you look inside the exit tray and they have rubber feeder bands that have both broke is there a part number for them and can you make a video on how to replace them?
A note to those completing this task. Be careful with installing the separation pad. Watch the video closely. If you try to push it back in too low you'll snap the location tabs off. Lift it into the location holes. Pushing it down at the back helps with this process of alignment. I also found a flashlight invaluable when doing this repair.
paylaşımın için teşekkürler.
The ADF in your video looks very much like my LaserJet PRO MFP M225.
I try to scan to USB via the ADF, but nothing happens. The error reads Load Feeder. I already have paper on the feeder. I cleaned all the rollers and the separation pad with distilled water.
All the rollers turn freely when I move them with my finger. Do you think I need a new sensor? Where is the sensor located? How much is it?
This really helped thanks hehe
Thank you
patenin büyük olan kısmın lastiğini ters çevirdiğin vakit daha verimli hale geliyor eğer tarama esnasında kağıdı çekmekte zorluk oluyorsa bende aynı yazıcı var.. bilginize
Any idea of the problem for the symptom of the adf doing nothing when attempting to feed except giving a mispick error?
The HP Color Laserjet MFP M477 has exit rollers in the ADF when you look inside the exit tray and they have rubber feeder bands that have both broke is there a part number for them and can you make a video on how to replace them?
Hello Please contact us directly at 908-245-2100 or visit us at www.metrofuser.com/contactus
how to disassembled hp Printer 425dn feeder??
감사합니다
Bonsoir monsieur s'il vous plaît aidé mon HP laser jet pro 400 m25dn emmet un message erreur scanner 16 éteindre puis allumer merci pour votre aimable réponse.
It’s a pity that there is no such video on Russian-language RUclips.
bro i need your help
Email us at sales@metrofuser.com
que mal trabajo, primero se desarma se limpia y luego se cambia parte nuevas