I’ve watched the official videos from Beringer and Midas like 15 times on this. They should post your video. Trainings on this board using the “what we used to do on analog boards” approach is right on target for me and probably most of the others out there. Thank you! 🙏 Now I have to figure out how to route mix busses out the lxr outs and see if I can pan a mix bus. I bought some dual xlr to 3.5mm cables. I want mix bus one to be left and 2 to be right. Seems overly complicated. Who cares if in ear monitors are in stereo? Right? When I figure it out I’ll make a video.
You definitely do a better job than average of teaching this stuff. Well done. I wish this particular video had delved more in-depth into individual musicians controlling their own monitor mixes. The first question that will pop into the average mixer's mind is, "Can I limit them to ONLY being able to adjust their own monitor mix so they can't accidentally mess up someone else's?"
Thank you very much for the tutorials. Very informative and easy to understand. I would love to see more on how to setup FX for each channel. I love the idea of having musicians to use phone/ipad to control their mix. Great work!
Great video. I have a couple questions. We use 4 wedges, aux 1-4, simple. I typically start a baseline with the mix bus sends knob on the console first, then fine tune with sends on fader. I'm not sure what happened, but the first two knobs were aux 1&2, just like you adjusted at the 2:36, but now, knob 3 & 4 are aux 1&2. At our last gig, I turned off all the mix from the drums and it will still registering. I also had post fader on #13 that was registering, but I had no idea what was coming through it. How do I get monitor 1-4 to correspond correctly with knobs 1-4? Any help would be greatly appreciated
Is it possible to solo the bus sends in the headphones? I am looking to set up two busses as a stereo "monitor" for a live stream on outputs 5and 6 but want to check output mix in headphones before we begin the livestream
Thanks for this video - I've watched a bunch of others, including the ones from Behringer, which were not only not helpful but downright confusing in some cases. I wish I would have watched this one first...it would have saved me a lot of time and frustration (coming from the aspect of an analog board really helped...) Any chance of updating it using the x32 Producer?
Thank you for the tutorial. I have a question, and I'm not sure if you'll be able to help. If I'm running Skype for a meeting or live streaming, should I use monitor mix to send audio out to my laptop? Would that work? Thanks.
KAIVILI You would have the click as an input then have the fader for FOH for the click input on 0 then through the monitor busses pull the click fader up.
![[#2024MAMA] BIGBANG (빅뱅) - 뱅뱅뱅 (BANG BANG BANG) + FANTASTIC BABY | Mnet 241123 방송](http://i.ytimg.com/vi/EQsYfiPR9uM/mqdefault.jpg)
I’ve watched the official videos from Beringer and Midas like 15 times on this. They should post your video. Trainings on this board using the “what we used to do on analog boards” approach is right on target for me and probably most of the others out there.
Thank you! 🙏
Now I have to figure out how to route mix busses out the lxr outs and see if I can pan a mix bus. I bought some dual xlr to 3.5mm cables. I want mix bus one to be left and 2 to be right. Seems overly complicated. Who cares if in ear monitors are in stereo? Right?
When I figure it out I’ll make a video.
Agree. There are so many gurus out there and I don't understand what they are saying. These tutorial videos are great.
This was very helpful! I am going on tour with my school’s worship live team and they use the x32 on tour. Thank you!
You definitely do a better job than average of teaching this stuff. Well done. I wish this particular video had delved more in-depth into individual musicians controlling their own monitor mixes. The first question that will pop into the average mixer's mind is, "Can I limit them to ONLY being able to adjust their own monitor mix so they can't accidentally mess up someone else's?"
God bless thanks for the series it really help a lot. Will start putting that knowledge into action now.
Thank you very much for the tutorials. Very informative and easy to understand. I would love to see more on how to setup FX for each channel. I love the idea of having musicians to use phone/ipad to control their mix. Great work!
Thanks! This was awesome
wow, very versatile! Thanks
Great job. I'd love to hear how well it works as a surface controller, for studio applications.
Well explain on how to route the inputs instruments using send on fader better than othe videos on Behringer and Midas.
Great video
Would do one for connecting the output please?
Great video.
I have a couple questions. We use 4 wedges, aux 1-4, simple. I typically start a baseline with the mix bus sends knob on the console first, then fine tune with sends on fader.
I'm not sure what happened, but the first two knobs were aux 1&2, just like you adjusted at the 2:36, but now, knob 3 & 4 are aux 1&2. At our last gig, I turned off all the mix from the drums and it will still registering. I also had post fader on #13 that was registering, but I had no idea what was coming through it. How do I get monitor 1-4 to correspond correctly with knobs 1-4?
Any help would be greatly appreciated
Is it possible to solo the bus sends in the headphones? I am looking to set up two busses as a stereo "monitor" for a live stream on outputs 5and 6 but want to check output mix in headphones before we begin the livestream
What kind of router can I used to connect my iPad?
Thanks for this video - I've watched a bunch of others, including the ones from Behringer, which were not only not helpful but downright confusing in some cases. I wish I would have watched this one first...it would have saved me a lot of time and frustration (coming from the aspect of an analog board really helped...) Any chance of updating it using the x32 Producer?
I have some questions wondering if you could help
Thank you for the tutorial. I have a question, and I'm not sure if you'll be able to help. If I'm running Skype for a meeting or live streaming, should I use monitor mix to send audio out to my laptop? Would that work? Thanks.
Thanks
thank you! HI FROM RUSSIA ! God Bless YOU BRO!)))
Bad is to cant set eq of each channel and sent to mix of monitor with no touch main
Thankyou .
How do i setup a click track directly to monitors( inears)so it bypasses the FOH
KAIVILI You would have the click as an input then have the fader for FOH for the click input on 0 then through the monitor busses pull the click fader up.