Kai Johnson your wheels are a lil wider on the rear than mine by only 1/2 of an inch but, I also have a more of an aggressive offset...so u should b ok in the back👌🏽 but on the front, you could run a aggressive 12 offset with a 245/35/19 tire with those 9.5 inch wide wheels you’re planning to get there also plenty of examples on different fitments on the Fitment Industries website gallery
Hopefully you fixed the fitment! Should have got 9.5 front 10.5 back. I got the same car and bought same wheels looks good in that size. 19x9.5 front 19x10.5 back
don't get overfenders! keep the clean stock body. if I were you I would just trade or sell the wheels unless you want to buy a full angle kit and run aggressive camber. 19x9.5 and 19x10.5 would work better.
What ever happen to this wheel setup did you figure out what size to run? I'm looking at doing a 18x9.5 +10 front and 18x11 +8 in the rear but after seeing your video might be too much for stock rolled rear fenders.
@@ProjectKaiGarage33 Have you figured out what size tire for the rear I want to do a 305 but might have to down size to a 295or 285 currently running 245 and 275 18x10 all around.
I run Aodhan DS-02 18x9.5 front 18x10.5 rear (both +22 offset) wheels and Federal 255/40 front 275/40 rear.
/40?? That shit too thicc i got 19x9.5 with 275/40 and that shit hitting hard and makes my rim look ugly asf 😩😩
with brembos and clearing ?
Do you run a spacer
even with a 15mm spacer you would need like 5 degrees of camber
you're fine the rear just needs to be rolled and pulled and the front would just need a smaller tire i've ran wider than this before stock body
Yeah i just like that meaty setup. I'll definitely being look at fitting the rear without the over fenders first.
The 15 mm is basically a stock size quarter panel for people who crashed
Super awesome wheels will look sick bro 🇬🇧🇬🇧👍🇺🇸🇺🇸🇬🇧🇬🇧Ron uk
Clean af
-12 offset fits my Z, my rears are rolled tho and tires aren’t stretched enought to negatively affect preformance.
what size tires are you running and what are your fenders pulled at all? My rears are also rolled but not pulled.
Kai Johnson ( f 9.5 245/35/19 ) ( r 10.5 275/35/19 ) both with -12 offset
No pulled fenders🤮
Kai Johnson your wheels are a lil wider on the rear than mine by only 1/2 of an inch but, I also have a more of an aggressive offset...so u should b ok in the back👌🏽 but on the front, you could run a aggressive 12 offset with a 245/35/19 tire with those 9.5 inch wide wheels you’re planning to get
there also plenty of examples on different fitments on the Fitment Industries website gallery
Kai "Stance Boi" Johnson
Hopefully you fixed the fitment! Should have got 9.5 front 10.5 back. I got the same car and bought same wheels looks good in that size. 19x9.5 front 19x10.5 back
Are the rivets removable? I want these but want to paint the faces Mayte black
I just wanted to say Thanks for the vid bro
I’m sure by now you have fixed the problem. Why don’t you go with a 19x10.5 +22 in the front. That should fit just fine as well.
Thought about that but I haven't seen them make it in a 10.5 wheel size. It has always been 9.5 or 11
Would the fronts fit 10.5 +23
Will these fit on a rocket bunny 350
350z Rocket bunny wheels specs need to be at least 12.5 front and at least 14 rear
don't get overfenders! keep the clean stock body. if I were you I would just trade or sell the wheels unless you want to buy a full angle kit and run aggressive camber. 19x9.5 and 19x10.5 would work better.
Will that size fit no problem, just put tires on and go?
Those are going to look sick
Nice!
🔥🔥🔥
👍👍🔥🔥
245/40/19...Toyo 19x11
What ever happen to this wheel setup did you figure out what size to run? I'm looking at doing a 18x9.5 +10 front and 18x11 +8 in the rear but after seeing your video might be too much for stock rolled rear fenders.
Haven’t done anything else since this video. The fronts 19x9.5 +15 are still backordered I want.
@@ProjectKaiGarage33 Have you figured out what size tire for the rear I want to do a 305 but might have to down size to a 295or 285 currently running 245 and 275 18x10 all around.
ProjectZGarage was going to run a 275/35 in the rear.