Got my tester after ordering last week. Well made, showed 20psi which confirmed a problem inside the tank. Discovered a clogged Mahle filter. Replaced with WIX, put fuel assembly back in tank and retested with Taco Pressure Tester - 50psi. Felt like my bike gained 10hp on a quick ride around the block. Thanks from Athens, GA!!
I was hoping mine was the fuel filter. I did need changing anyway but the problem persists. Got my tester coming and I'm hoping to see low pressure to be honest as then I guess I will buy a new pump and if that ain't it. A new regulator
Mike i have been watching alot of videos about my bike i have 12 hours on my 2023 ktm 450 sxf I have only trail ride with the bike no racing or abused never hit full potential went to go for a trail ride went to start the bike and let it warm up and the bike is running rough and hardly stays running cuts out and I have slightly noticeable black smoke coming out of exhaust if you can help guide me through this process much appreciated first time ktm owner 🙏
I am using this set up on a 23 KTM 300, It will not run with it all connected, put all back to stock it will run and idle fine, bike has power loss on acceleration and hills, bogs down.
I have husqvarna te250r 2012 redhead and some leak if i take off fuel line from injector ? Its normal or bad ? And any recomender fuel preasure for subtitusion ? Thanks mate
I just bought a 2020 500 xcfw. How common are fuel pump failures on these 500s, and do you recommend changing the stock pump out for an aftermarket pump like the one you carry ?
Can you also use this gauge to check starting pressure? I know I have a bad injector but also want to check and see if I have a pump issue as well. In other words, can I hook it up with only the end connected at the tank?
Other end is open to flow, so link the hose on the output to the injector side You can also send us the entire pump assembly and injector and we can diag and repair as needed Info@tacomoto.co
@@TACOMOTOCO hmmm, ok. My injector is off the bike, shop said it was bad. I might have to find a way to plug it for testing sake. Do you sell injectors also?
Got my tester after ordering last week. Well made, showed 20psi which confirmed a problem inside the tank. Discovered a clogged Mahle filter. Replaced with WIX, put fuel assembly back in tank and retested with Taco Pressure Tester - 50psi. Felt like my bike gained 10hp on a quick ride around the block.
Thanks from Athens, GA!!
I was hoping mine was the fuel filter. I did need changing anyway but the problem persists. Got my tester coming and I'm hoping to see low pressure to be honest as then I guess I will buy a new pump and if that ain't it. A new regulator
Thanks Mike! Got my tester and works great! Very well made - high quality instrument. Highly Recommended!
Love it. Glad it’s going to work for you🤘🏽
Mike i have been watching alot of videos about my bike i have 12 hours on my 2023 ktm 450 sxf I have only trail ride with the bike no racing or abused never hit full potential went to go for a trail ride went to start the bike and let it warm up and the bike is running rough and hardly stays running cuts out and I have slightly noticeable black smoke coming out of exhaust if you can help guide me through this process much appreciated first time ktm owner 🙏
Nice!
I am using this set up on a 23 KTM 300, It will not run with it all connected, put all back to stock it will run and idle fine, bike has power loss on acceleration and hills, bogs down.
When will this be back in stock?
I have husqvarna te250r 2012 redhead and some leak if i take off fuel line from injector ? Its normal or bad ? And any recomender fuel preasure for subtitusion ? Thanks mate
I just bought a 2020 500 xcfw. How common are fuel pump failures on these 500s, and do you recommend changing the stock pump out for an aftermarket pump like the one you carry ?
It’s not that common but it does happen. I pack a fuel pump motor w me on every ride just in case though and have changed 2 out in the bush in baja
I thought about carrying a spare, but I didn’t know how easy it would be to do, and what do you do about not loosing all your fuel?
I carry just the pump motor, hoses, clamps.
Transfer gas to other bikes during swap
tacomoto.co/products/california-cycle-works-ktm-husqvara-fuel-pump
Can you also use this gauge to check starting pressure? I know I have a bad injector but also want to check and see if I have a pump issue as well. In other words, can I hook it up with only the end connected at the tank?
Other end is open to flow, so link the hose on the output to the injector side
You can also send us the entire pump assembly and injector and we can diag and repair as needed
Info@tacomoto.co
@@TACOMOTOCO hmmm, ok. My injector is off the bike, shop said it was bad. I might have to find a way to plug it for testing sake. Do you sell injectors also?
@jerryberkel8421 we service clean old ones and carry new as well
@@TACOMOTOCO thank you. I looked on the site but couldnt find injectors. I will call and order one. Thank you again.
@@jerryberkel8421 info@tacomoto.co 🤘🏽🤘🏽