Dominar 250/400 Engine Oil Change | Motul 7100 10w50 | Service at home DIY

Dominar 250/400 Engine Oil Change | Motul 7100 10w50 | Service at home DIY #motul #diy #dominar
#engineoilchange #dominar #dominar250bs6 #motul #vlog #bajaj #10w50 #7100 #servicing

[@gauravsaikia4606]

Mara domi 250 may 1.5l daldia koi problem to nahi hoga na

[@sujitkumarskpvlogs]

Aur 200 ml top up kar do

[@patelsanil8681]

Mere pas new ns 200 he service center vale bol rahe he usra engine oil use karoge to warranty nhi milega engine ka company se ye bat sahi he?

[@sujitkumarskpvlogs]

After 3 free services You can use other Engine oil. Service center wale to bolenge esa

[@johnnysinsofficial8109]

MT 15 V2 2023 ke liye konsa lu brother 💖 10w50 vs 20w50 🙄 pls replay 🙏

[@sujitkumarskpvlogs]

Bro if you want Mileage then put 10w50 or if you want pickup then put 20w50.
Choice is yours.

[@johnnysinsofficial8109]

@@sujitkumarskpvlogs thanks man 🔥 love from odisha 💖

[@sujitkumarskpvlogs]

I’m from Odisha bro😊

[@skullriders2.1]

6k Mai engine flush use kar liya? Koi problem nahi dega?

[@sujitkumarskpvlogs]

Nehi

[@MRIDONBORO]

kitna ltr dalna he engine oil

[@sujitkumarskpvlogs]

1.7 litter

[@nikiahmed5449]

Oil drain open karne ke liye konsa number ka wrench chahiye?

[@sujitkumarskpvlogs]

13 number

[@nikiahmed5449]

@@sujitkumarskpvlogs Aur samne wale mei?

[@tathagatadutta881]

@@nikiahmed5449 He's providing wrong info....For main one it's 18mm and for the secondary one 13mm.

[@sudarshanroy113]

Kitne km ka bad flash Karna chahiye?

[@sujitkumarskpvlogs]

5k KM ke baad

[@KichunKenz]

Engine oil flush must be used once at 20,000 or 25,000 KMS depending on your vehicle type and CC. Once your going to change the Engine oil brand then Engine flush is must. But using at every oil change time is not at all advisable.

[@tathagatadutta881]

was the vehicle driven for atleast 10-20mins or 4-5 kms before pouring flush??

[@sujitkumarskpvlogs]

After put Flush liquid have start the engine for 10-15 min. Other than you can drive 10-15 min.

[@tathagatadutta881]

@@sujitkumarskpvlogs Nope I'm not asking about what I have to do after putting.... I'm asking was the engine sufficiently hot before pouring flush?

[@sujitkumarskpvlogs]

@@tathagatadutta881 No After pouring only have to start engine .

[@tathagatadutta881]

@@sujitkumarskpvlogs It's not recommended...You can search anywhere on youtube and google...about flushing... It's always poured in a warm engine... not a cold one...

[@sujitkumarskpvlogs]

@tathagatadutta881 ok bro

[@SohelRana-dt5pw]

Brother what about milage?

[@sujitkumarskpvlogs]

My mileage increases 27 to 32

[@ankeetdas8681]

Engine oil ka result kesa hai??

[@sujitkumarskpvlogs]

Smooth

[@VivekRambo]

कम से कम 30/40 हजार चला तो लेते

[@sanjayborah041]

is this domi 250 oil capacity 1.7 ltr?

[@sujitkumarskpvlogs]

Yes

[@sanjayborah041]

@@sujitkumarskpvlogs 400 nd 250 same capacity?

[@sujitkumarskpvlogs]

Yes same

[@akashpanchal8911]

1850 hain na engine oil capacity

[@sujitkumarskpvlogs]

No it's 1700

[@mlpsharma7731]

Your engine ia so dirty clean it with petrol

[@sujitkumarskpvlogs]

Outside or Inside..??

[@mlpsharma7731]

@@sujitkumarskpvlogs both

[@mlpsharma7731]

@@sujitkumarskpvlogs putt petrol in engine but dont start it if you bike have kick then kick it with key off

[@zeninoriginal]

don't put petrol for cleaning it will destroy your clutch plates which has leather material

[@sujitkumarskpvlogs]

Yes I know bro