I have a trimoto 200 that “clicks” in first gear. Thinking I lost a tooth or two on a gear in the transmission. I may have to open it up soon. This video is a great help!
Nice job explaining what you're doing. Just picked up a 1983 ytm 200k tri-moto. Need a pull start cover and so far i've been unable to locate a usable cover. Any suggestions?
I'd agree with you on that. Thanks for watching. Hit the subscribe button as we have a lot more videos coming out that we use rubber hammers instead of steel. If you need parts or tools for the job check us out at www.midnebraskamotorsports.com/
When you removed the middle drive gear from the engine was there a thrust washer shim behind the gear ? I'm fixing a 225dx and the parts schematic shows a shim washer behind the gear. Thanks
Awesome vids, I have this moto and want to pull the engine so I can restore the frame. Do you need to remove the rear from frame in order to split the shaft drive to remove the engine? Thanks
I'm not fully understanding the questions. The output can be removed without removing the engine. There rear end doesn't need to be removed to remove the engine. Does that answer your question? Thank you for watching and the comment. Check out our website if you need parts! www.midnebraskamotorsports.com/
I don’t know of any decent kits. Amazon has some junk ones. Niche or caltric is garbage. I would make your own kit. Cometic gaskets, wiseco or pro x pistons, etc. I can help put one together if you are still needing one. If you need more helpful tips, check out: ruclips.net/video/X0AdFxkJiOg/видео.html and if you need parts: www.ebay.com/str/midnebraskamotorsports. thanks for watching and the comment.
Hi I have one of those bike's but found a broken spring bits came out of right hand side of engine an these bits came out with magnetic tool three the oil refill
Bummer. Get me some more details so I can help! Thanks for watching and the comment. Let us know if you need parts or have any questions: www.ebay.com/str/midnebraskamotorsports
@@MidNebraskaMotorsports well I live in New Zealand an I am after some parts but will decide if motor is fixable on right hand side of engine we found some bits of spring but have no idea where it's all come from
I have a trimoto 200 that “clicks” in first gear. Thinking I lost a tooth or two on a gear in the transmission. I may have to open it up soon. This video is a great help!
Nice job explaining what you're doing. Just picked up a 1983 ytm 200k tri-moto. Need a pull start cover and so far i've been unable to locate a usable cover. Any suggestions?
Very big help !!! Thank you !!
Awesome. i was wondering if there was a clutch adjustment or if i had to replace mine.
Lots of help thanks
👍🏻 more Tri Moto videos on our channel too, check them out! ruclips.net/user/MidNebraskaMotorsports
@@MidNebraskaMotorsports could you do a video on timing the ytm 200 motor as well? Would be much appreciated
Can u do a video on how to replace shift assembly
Use a socket extension on the hand impactor to get at screws too. 😎
Can you show a video on valve seal changing
You should use a rubber hammer when your banging on aluminum
I'd agree with you on that. Thanks for watching. Hit the subscribe button as we have a lot more videos coming out that we use rubber hammers instead of steel. If you need parts or tools for the job check us out at www.midnebraskamotorsports.com/
When you removed the middle drive gear from the engine was there a thrust washer shim behind the gear ? I'm fixing a 225dx and the parts schematic shows a shim washer behind the gear. Thanks
Awesome vids, I have this moto and want to pull the engine so I can restore the frame. Do you need to remove the rear from frame in order to split the shaft drive to remove the engine? Thanks
I'm not fully understanding the questions. The output can be removed without removing the engine. There rear end doesn't need to be removed to remove the engine. Does that answer your question?
Thank you for watching and the comment. Check out our website if you need parts! www.midnebraskamotorsports.com/
@@MidNebraskaMotorsports Yes thank you.
I need to replace my shift shaft on 200e with reverse. I have parts but never had my engine apart. Any tips would be great.
I just bought a tri moto 200 but I need to buy top end rebuild any suggestions for what kits I should buy .
I don’t know of any decent kits. Amazon has some junk ones. Niche or caltric is garbage. I would make your own kit. Cometic gaskets, wiseco or pro x pistons, etc. I can help put one together if you are still needing one. If you need more helpful tips, check out: ruclips.net/video/X0AdFxkJiOg/видео.html and if you need parts: www.ebay.com/str/midnebraskamotorsports. thanks for watching and the comment.
I only have first and neutral. Tried adjusting the clutch. It will not move at all
Hi I have one of those bike's but found a broken spring bits came out of right hand side of engine an these bits came out with magnetic tool three the oil refill
Bummer. Get me some more details so I can help! Thanks for watching and the comment. Let us know if you need parts or have any questions: www.ebay.com/str/midnebraskamotorsports
@@MidNebraskaMotorsports well I live in New Zealand an I am after some parts but will decide if motor is fixable on right hand side of engine we found some bits of spring but have no idea where it's all come from
What kind of information you need to help me out????
@@MidNebraskaMotorsports what details do you need about my Moto Yamaha 3 wheeler trike
@@MidNebraskaMotorsports do you have an email you can send an I can get whatever you need to know
Hi, quick question, does embody know if it will bolt on 225 top end on 200 engine on these trikes?
The head is interchangeable. Not sure the cylinder is. check out: www.ebay.com/str/midnebraskamotorsports
My ytm 200 wouldnt shift down from third all of a sudden. Then tried to shift into 5th then locked up. Any ideas how to fix it?
Yo what was the flywheel puller you used? Link?
Happens when the gears will turn backwards