Thank you so much for this video. There is no info on the web about this. I have a dump truck that is leaking really bad. going to try to get this done tonight!
I am from China Seals Factory. Our company produces many types of hydraulic oil seals. If you are interested in our products, we can send you free samples so that you can learn more about our products.
No funciona nosotros lo intentamos pero no salen es un pedito sacar estos sellos,nosotros los desarmados en 2 horas y los fabricamos los sellos en 4 horas le metemos 2 sellos v en cada sección y un sello cubre polvo en la tapa y aguantan en trabajo raudo asta 7 a 9 años los sellos los fabricamos de poleuretano dureza 90-95-A y lo armamos en 1hora y media o ses que en un turno de 8 horas sale listo cobramos $ 30,000.00 ya con iva
It took two people on a big pipe wrench to make the bottom cylinder stop leaking the other day. We did it standing on the truck but It would be much safer to use a 10 or 12 foot cheater bar. Then one person could stand on the ground and tighten it while the other keeps the wrench in position.
Yo trabajo en minatitlan ver y nos dedicamos también al ramo de la hidraulica kidottos sacamos todo el gato de 5 secciones lo acostamos en una mesa lo sujetamos soldado y le alzamos con un diferencial tripie el vastago chico y le aremos lo wue hace re amigo,al alzarlo afloja la parte de abajo y si wprovechwm9s para jalarlo con un tornillo o pija para madera de 1 /8" y afloja el resvalon después lo dejamos flojo que caiga y le damos por arriba y asi sucesivamente sale .
One can only assume I'm guessing you raised the bed, blocked it up with the cylinder already unfastened at the top. release the cylinder inside the cab and let it collapse?
@@onebadds10 ok! One I got the top pin Out I fished a chain thru the pin holes and was able to lift the bed with a jd 544 from behind. Then blocked up with 2 6" poles to the ground. Then easily lifted the cylinder out with a JD 410 with a strap.
I am from China Seals Factory. Our company produces many types of hydraulic oil seals. If you are interested in our products, we can send you free samples so that you can learn more about our products.
Good work bro
Thank u for the video .Where did u order the seal kit ???
Thank you so much for this video. There is no info on the web about this. I have a dump truck that is leaking really bad. going to try to get this done tonight!
I am from China Seals Factory. Our company produces many types of hydraulic oil seals. If you are interested in our products, we can send you free samples so that you can learn more about our products.
Could you charge it with air and help force them out.. Since the cap is removed???
No funciona nosotros lo intentamos pero no salen es un pedito sacar estos sellos,nosotros los desarmados en 2 horas y los fabricamos los sellos en 4 horas le metemos 2 sellos v en cada sección y un sello cubre polvo en la tapa y aguantan en trabajo raudo asta 7 a 9 años los sellos los fabricamos de poleuretano dureza 90-95-A y lo armamos en 1hora y media o ses que en un turno de 8 horas sale listo cobramos $ 30,000.00 ya con iva
Looks like you may need a tire too. 😊
😮 how many seals are in there??!!
Where did you find the seal kit ? .
Great video, but I was hoping to see the final assembly. How tight should the spanner rings be?
It took two people on a big pipe wrench to make the bottom cylinder stop leaking the other day. We did it standing on the truck but It would be much safer to use a 10 or 12 foot cheater bar. Then one person could stand on the ground and tighten it while the other keeps the wrench in position.
Just snug them up. if they leak then tighten a little more.
Yo trabajo en minatitlan ver y nos dedicamos también al ramo de la hidraulica kidottos sacamos todo el gato de 5 secciones lo acostamos en una mesa lo sujetamos soldado y le alzamos con un diferencial tripie el vastago chico y le aremos lo wue hace re amigo,al alzarlo afloja la parte de abajo y si wprovechwm9s para jalarlo con un tornillo o pija para madera de 1 /8" y afloja el resvalon después lo dejamos flojo que caiga y le damos por arriba y asi sucesivamente sale .
muy buena tecnica
That one used to extract the seals thanks
Great video whats the blue tool name
LOL Dent puller
Better known as a slide hammer
Por veracruz le llaman extractor de golpe son buenos
One can only assume I'm guessing you raised the bed, blocked it up with the cylinder already unfastened at the top. release the cylinder inside the cab and let it collapse?
I use the skid steer to raise the bed and block it up
@@onebadds10 ok! One I got the top pin Out I fished a chain thru the pin holes and was able to lift the bed with a jd 544 from behind.
Then blocked up with 2 6" poles to the ground.
Then easily lifted the cylinder out with a JD 410 with a strap.
I am from China Seals Factory. Our company produces many types of hydraulic oil seals. If you are interested in our products, we can send you free samples so that you can learn more about our products.
Still scares me working under the "propped" trailer bed, did it once and didn't like it.
Nesesito conprarlo
Nesesito conprarlo
No repararlo conprarlo
DONDE LO VENDEN UN CILINDRO DE 5 SECSIONES DE TRAILETA
Whats the point of this video??
Sacar los sellos y el resvalon para cambiar sellos nuevos el resvalon puede ser el mismo ,