BEST X-Macro Tac Ops Upgrades! W/ Install

Поделиться
HTML-код
  • Опубликовано: 23 дек 2024

Комментарии • 187

  • @clutchmaster_
    @clutchmaster_  Год назад +4

    Be sure to Subscribe! Many more great videos coming soon!

    • @GGP39
      @GGP39 11 месяцев назад

      Compensator is dumb. How you going to remove the barrel to clean it without taking off the comp?

  • @XrayMike17plus1
    @XrayMike17plus1 Год назад +19

    Just a heads-up, that's not a 3.7 inch threaded barrel . It's for the 3.7 inch slide but the barrel is more like 4.25 inches in terms of barrel length.

  • @v.german11b
    @v.german11b Год назад +5

    I got one. The Sig Sauer P365 XMacro TACOPS 17+1 is truly the finest. What surprised the most is how accurate it is. I installed a Vortex Defender CCW 6 MOA, which made it a tack driver. I am extremely happy with it.

  • @tacratt6091
    @tacratt6091 9 месяцев назад +1

    You can get the correct size screws from TACRIG for the EPS carry, you can remove the plate and mount directly to the pistol.

  • @JohnWicksPencil14
    @JohnWicksPencil14 Год назад +8

    My EPS carry didn't come with the proper screws for installation, so I was able to order some from QVO tactical which are longer so you don't need the adapter plate.

    • @self-awaregunship6869
      @self-awaregunship6869 10 месяцев назад +2

      I ordered a few spare sets, and i'm glad i did. I have an XMacro comp, an Xmacro non-comped, and am looking to pick up a P365X to build out a setup like the Radian teams introduced to the market at Shot Show this year.

  • @perksoflivingvlogs6219
    @perksoflivingvlogs6219 Месяц назад +1

    My ESP Carry will direct mount to the X Macro, not sure why I see so many people using the adapter plate.

  • @cp2158
    @cp2158 Год назад +16

    You should definitely try and get your hands on the Empire Javelin guide rod. Makes the slide feel like butter compared to the factory one and also helps with the comp. Its always out of stock but they drop them periodically.

    • @Fb6.Nan0
      @Fb6.Nan0 Год назад +1

      just singed up to get notified when they drop again! thanks

  • @shelbythomas5007
    @shelbythomas5007 Год назад +10

    What holster do you run with that?

  • @Shelfka
    @Shelfka Год назад +4

    Dangg this is sweet! I love the way it turned out and will definitely be adding the ledge/TLR7 combo to my macro here soon.

  • @qthenz
    @qthenz Год назад +4

    Nice setup! Thanks for sharing.
    What do you use for holster now that you installed the TLR PEDAL?

  • @Citizen2ACitizenLLC
    @Citizen2ACitizenLLC 10 месяцев назад +1

    Great video. Love the upgrades. I just picked up a X Macro Comp 3 weeks ago and I love it. Looking at different upgrades now. Thanks for sharing. Just sub'd. Very informative.

  • @nchicks9573
    @nchicks9573 11 месяцев назад +5

    Now what holster fits it lol I’d love to do the barrel and comp on mine but does it fix any holster

    • @fredvStein
      @fredvStein 10 месяцев назад

      There aren’t going to be any companies that have a pre-made mold for this combo : grip, light, gas pedal, and comp all complicate that. You’d have to take the gun to a custom shop and ask them to make the holster while you wait using your gun. Not a lot of such outfits exist.

  • @AntiWoke88
    @AntiWoke88 4 месяца назад +1

    Just got my tacops today, eps, and TLR-7x light. With your additional upgrades, what holster you rocking? I’m not appendix carry, I prefer OWB as I cover it with a shirt easy.

  • @austinsteiner9665
    @austinsteiner9665 10 месяцев назад +1

    Is it hard to find a holster that fits with the pro ledge? It looks like a great product and looks like it would be vertical helpful. Finding a holster is my only concern. Thank you in advance

  • @mikejmardis
    @mikejmardis Месяц назад

    The multi tool included can be used to install the c-clip

  • @pvtcantrell74d
    @pvtcantrell74d 9 месяцев назад

    Bro this is exactly what I was looking for. Thank you.

  • @tristanbufkin9641
    @tristanbufkin9641 Год назад +1

    I have this same exact setup! Good video what do you recommend for a holster

  • @adrianr8486
    @adrianr8486 9 месяцев назад

    I need one of those barrels on my x macro. Same color as well. Thank you!

  • @paulories4047
    @paulories4047 Год назад

    That was a really well done and informative video. And, the first one for me where a compensator was installed. Thank you.

  • @BrandensOutdoorChannel
    @BrandensOutdoorChannel Год назад +1

    Great optic. I've been carrying the Green MRS EPS Carry since November 2022. Got one of the first batches. Optic should have been direct mounted without a plate.

    • @clutchmaster_
      @clutchmaster_  Год назад +2

      Ya they didn't include the screws in order to install without the plate but I guess if you contact them they will send you the right screws. The plate doesn't bother me. Still makes for a great co-witness.

  • @isaiahcraig8022
    @isaiahcraig8022 Год назад +1

    The pro ledge will work on the normal macro right I don’t see why it wouldn’t

  • @stevenkrawchuck8108
    @stevenkrawchuck8108 Год назад

    I just got the same gun and was thinking todo the same things you did can wait to see the shooting video thank you so much

  • @kevingamez9574
    @kevingamez9574 5 месяцев назад

    Now what do you do if you ever want to change the barrel again??

  • @jdub9831
    @jdub9831 Год назад +2

    What holster with that ledge attached?

  • @tylerbeck3806
    @tylerbeck3806 Год назад +35

    Should title this video: "How to double the cost of a handgun purchase and make it more difficult to carry/likely to have reliability issues".

    • @kashifjones6007
      @kashifjones6007 9 месяцев назад

      @tylerbeck3806 you’re an idiot what would make it have reliability issues? The Holosun lol or the streamlight

    • @kys3285
      @kys3285 8 месяцев назад +1

      just say you can't afford it..

    • @tylerbeck3806
      @tylerbeck3806 8 месяцев назад

      @@kys3285 Why does Gordon Ramsy only have one handgun then? Sometimes things just dont make sense from a monetary perspective, irrespective of how much money you have/make.

    • @kevint1911
      @kevint1911 8 месяцев назад +10

      If you don’t like it,don’t buy it. On the other hand if you are interested in possible upgrades for your pistol this video covered several. They aren’t all for me but maybe this RUclipsr wouldn’t like some upgrades I would choose either. To each his, or her, own.

    • @kys3285
      @kys3285 8 месяцев назад +2

      @tylerbeck3806 lmao what? 🤣 tf does Gordon ramsay have to do with accessories on a gun? Ur a salty hater nothing more

  • @SPENJERE
    @SPENJERE 3 месяца назад

    Very nice, why did you choose the single top port versus the dual port comp ?

  • @Old_Toby
    @Old_Toby Год назад +14

    How do you find a holster that will fit the pro ledge or whatever that thumb rest is called? Seems like it would hinder taking out and putting back in the holster.

    • @samcro9168
      @samcro9168 Год назад +2

      get a hair dryer or heat gun. Fully holster your firearms. Then heat up the holster on the side of the pro ledge. You can manually form the holster to fit..

    • @Old_Toby
      @Old_Toby Год назад

      @@samcro9168 ahh. That a good tip.

    • @sterlingsilva5905
      @sterlingsilva5905 Год назад

      Who makes your holster for all that additional stuff

    • @samcro9168
      @samcro9168 Год назад

      @@sterlingsilva5905 i have a TXC pro holster. Used a heat gun to re mold the holster to fit the "pro ledge/gas pedal

    • @AFGixxeR88
      @AFGixxeR88 Год назад

      I got a mckinatec holster for the ledge. Sucks with the ledge you are mated to that one holster

  • @AXO9481
    @AXO9481 Год назад

    Thanks for the video. Contemplating setting up my Tac Ops the same way. 🍻

  • @scho881
    @scho881 9 месяцев назад

    Quick question: I have an X-macro with a compensator built into the slide already. In your experience, which one has less recoil: the compensator built into the slide, or the Harrington Arms Comp? Please let me know your thoughts!

  • @XoScottXo
    @XoScottXo Месяц назад

    Slap the holosun EPS on there ( or any other reliable optic) and thats all you really need.
    Sig P365 is a gem right out of the box.

  • @robertsalyers1351
    @robertsalyers1351 Год назад

    Why not just get the Sig Sauer p365 xmacro ??

  • @IlovemySubaru
    @IlovemySubaru 8 месяцев назад

    Great video bro. Is there a holster for this 365?

  • @kevingurall5555
    @kevingurall5555 9 месяцев назад +1

    Enjoyed the video, but as someone who made his living selling fasteners and locking compounds, I don't want to be the guy who has to disassemble that 'comp' from the barrel. Jeeze Louise, you used enough Loctite blue to secure it to a D9 Cat dozer going off a cliff 200 ft. cliff. Just a drop will do. You did an excellent job of picking the upgrades that the average shooter would be interested in. I made up my mind on two of the upgrades. Keep it simple, talk in terms everyone can understand, and don't try to gte too technical. There's already 1,000 of sites vying to be the technical experts, talk to the average man/woman and you'll always have an audience.

  • @RickheadWashington
    @RickheadWashington Год назад +2

    You missed the best one there is. It's not cheap but icarus xmacro ace 365 grip module. Takes the gun from 9/10 to 14/10. Best money I have spent on an upgrade even at $400. It's no joke they make incredible feeling grips that just melt into your hand and hold the grip tight

    • @clutchmaster_
      @clutchmaster_  Год назад +2

      I didn't forget about it I just didn't want to spend another $400 on my sig so I wanted to show the cheaper route with the pro ledge. But I'm sure its nice because everyone raves about it. I might get one eventually but I'm moving on to new guns and new set ups.

    • @nickadkins7765
      @nickadkins7765 Год назад

      ​@@clutchmaster_ It's amazing! I just shot my X Macro with the icarus precision grip for the 1st time Sunday and it is truly a game changer!

    • @solidrockofjesuschristmini2423
      @solidrockofjesuschristmini2423 Год назад

      I've been looking to get this grip but where the hell did you find yours? bc everytime I check its sold out and it's been that way for awhile

    • @solidrockofjesuschristmini2423
      @solidrockofjesuschristmini2423 Год назад

      @@MrSPHANDLE I haven't bought one yet, I been building my hunting rifle, I was honestly debating if it was worth 400 for me to do that bc I shoot my macro quite well, only thing I've done is add a green dot to it, but thank you for giving me a heads up on it

    • @clutchmaster_
      @clutchmaster_  Год назад

      @@MrSPHANDLE Ya I don't plan on it. I like it the way it is. Not only that but I'd rather do a budget build 5.56, or .308 for around the same price lol

  • @onlyeasydaywasyesterday
    @onlyeasydaywasyesterday 4 дня назад

    You should put the 365 x macro lower onto the 365 upper slide with the compensator on it send it makes the compensator even with the end of the x macro lower so it doesn't extend the barrel out longer makes it a lot easier to carry and actually I think it makes it look cooler but it just basically makes it even at the end It also works with the Parker mount comps and the also radiant afterburner comps too

  • @UAreviews1
    @UAreviews1 6 месяцев назад

    Where did you get the snap ring for your streamlight??

  • @JohnMohan-b3r
    @JohnMohan-b3r 11 месяцев назад

    I have purchased all of the equipment shown in this video. My question to you is what holsters will work best for this set-up?

  • @millbean13
    @millbean13 Год назад

    I like the pro ledge idea but is there any holster that fits it?

  • @harliquin76
    @harliquin76 Год назад +1

    now try to find a holster for that proledge

    • @KWConks78
      @KWConks78 Год назад +1

      I was gunna say the say shit😂

  • @wilder7bc
    @wilder7bc 9 месяцев назад

    Does these upgrades work on the P365 XMACRO which I have. I did not realize there was a COMP and a TACOPS model in the Xmacro. Also does the added compensator length effect conceal carry? I am guessing might be some holster issues?

  • @earlsenior7067
    @earlsenior7067 Год назад +3

    What holster do you use to accommodate the gas pedal?

  • @jeffseely1
    @jeffseely1 Год назад

    Have you found a holster that accommodates the light and ledge?

  • @StgVirus1
    @StgVirus1 Год назад +3

    I prefer the regular XMacro compensator myself, to each their own.

  • @jaredr2518
    @jaredr2518 Год назад

    Now what holster can accommodate the gas pedal?

  • @mikejmardis
    @mikejmardis Месяц назад

    That paint, that happens to be on the back of the spring, indicates spring weight.

  • @brandondane4777
    @brandondane4777 7 месяцев назад

    Do u still have to buy the key or did they update the light in may of 24 yet. They need to come with the correct size key in the box.

  • @simeonrivera2644
    @simeonrivera2644 Год назад +2

    Love your videos. Been checking daily for the tacops online, can’t wait to set it up pretty much just like this! Would probably get the 507k though. Any plans on throwing a can on it?

    • @clutchmaster_
      @clutchmaster_  Год назад +1

      Thanks Simeon! I think the 507K is a great option. In fact any Holosun is the way to go. I only suggested Romeo zero because they are on sale right now for a great price and is a great beginner optic but the clarity of the Holosun is unmatched. I don't have any plans to do a can just because it takes so long to be approved. Might throw a can on some other builds coming up like a 556 or a 6.5.

  • @bradyhall9611
    @bradyhall9611 Год назад

    Is there a holster that will fit with the light and the gas pedal on?

  • @barbaby97tx74
    @barbaby97tx74 10 месяцев назад

    Do you have a holster for this set up?

  • @daltonthompson2733
    @daltonthompson2733 Год назад

    i have the base x macro, with a tlr7 sub light, everytime i shoot it slowly rides down the barrel, i have the lock nut on the bolt and it sits right against the trigger guard. if anyone has any ideas plz lmk on how to fix this issue. other than that ive had no issues w this gun or light

  • @welldonecj7
    @welldonecj7 Год назад +2

    What holster are you going to use?

  • @lochuynh4687
    @lochuynh4687 Год назад

    can you fit this set up in the holster made for 7 sub?

  • @thomasgriffith3747
    @thomasgriffith3747 Год назад

    How would a 3.7 inch non threaded barrel fit in the xmacro? Will it have a tight fit and still be as accurate? It would eliminate the comp feature but give a longer barrel length like the tacops

    • @bretviola6871
      @bretviola6871 10 месяцев назад +1

      I was told by several people I know, and even some RUclips channels that a 3.7” barrel won’t fit in the X-macro. I would love to know if you personally made this upgrade.

    • @thomasgriffith3747
      @thomasgriffith3747 10 месяцев назад

      I have not done this

  • @crogers352
    @crogers352 Год назад +1

    Lookin at a setup like this. Any reasoning for going with the HC365 over the HC3652P? Trying to figure out the pros and cons of those two. Thank you

    • @clutchmaster_
      @clutchmaster_  Год назад +3

      I went with the HC365 just because there were so many reviews on it. What I haven't seen is a side by side of both comps. I can grab a HC3652P and make a video comparing the two if that would help.

    • @crogers352
      @crogers352 Год назад

      That would be great! Looks like you didn’t find much luck out there on comparing them either. Strange it hasn’t happened. Always heard good things HA products.

  • @marthinzambrana1350
    @marthinzambrana1350 Год назад

    Have you found a holster for the xmacro tacops?

  • @CMH_1975
    @CMH_1975 Год назад

    You don't have to run the plate to run the EPS Carry on and P365 variant with an optics cut.

  • @t.c.2527
    @t.c.2527 Год назад

    What holster did you find to fit the new upgrades

  • @geovonnibooth2978
    @geovonnibooth2978 Год назад +1

    Great video really looking foward to get this for myself! Ive been doing some research on the firearm and it just released I believe… what store were you able to get yours from pre release… if you dont mind me asking

    • @clutchmaster_
      @clutchmaster_  Год назад

      I got mine from bulldogfirearmsnm.com in store. They have it labeled as a 365x. I was in there last week and they had the version that comes with the Romeo Zero in stock. Price tag was $780 with the Romeo.

  • @simphiwe_stb
    @simphiwe_stb 2 месяца назад

    Subbed. This looks good.

  • @Knuck3ls1
    @Knuck3ls1 Год назад

    TLR7A would look better with the comp, no?

  • @C-LOS3
    @C-LOS3 Год назад

    I didn’t hear what color barrel that is, can you let me know please?

    • @clutchmaster_
      @clutchmaster_  Год назад

      Ya no problem! It's the copper TiCN threaded 3.7" barrel from True Precision. But I bought mine from optics planet which was a little cheaper than TP website. Make sure to use a discount code available to get the price down even more.

  • @nickadkins7765
    @nickadkins7765 Год назад

    Is the EPS MRS Carry different in terms of mounting? I tried to run the eps mrs carry (green) with no plate on my x macro but it was loose in the front. Installed the plate, and it was snug as it was supposed to be. Didn't want to have to use the plate, but it appears I've gotta do it unfortunately, so it is what it is

  • @zacwilliams6441
    @zacwilliams6441 10 месяцев назад

    What iron sights??

  • @tacroom12
    @tacroom12 Год назад

    That holosun co-witness at all?

    • @clutchmaster_
      @clutchmaster_  Год назад

      Yes, quite nicely because of the suppressor sights. If I got the proper screws and removed the Holosun plate it might be even better.

  • @chiney117899
    @chiney117899 Год назад +1

    will the barrel and compensator upgrades work with a p365 x macro with the compensator built into the slide?

    • @JM-vk3qg
      @JM-vk3qg Год назад +1

      Are you kidding or what

    • @jordanpurpura803
      @jordanpurpura803 Год назад

      Id love to know this answer to because the video says x macro but its a 365 slide not a macro slide so good question. Id like to know also?

    • @nickadkins7765
      @nickadkins7765 Год назад

      ​​@@jordanpurpura803The answer is no it will not work. You will have to buy the tacops slide/P365 XL slide

    • @XrayMike17plus1
      @XrayMike17plus1 Год назад

      NO. You can't put any barrel but the 3.1 in that slide. I believe there is an integrated bushing in the slide that holds the end of the 3.1 inch barrel in place that will prevent a longer barrel from dropping into position. A stock 365 XL barrel won't work.

    • @nickadkins7765
      @nickadkins7765 Год назад

      @@XrayMike17plus1 correct

  • @ronniethomas7369
    @ronniethomas7369 Год назад

    I thought the macro had a built in comp?

    • @rahendriks1
      @rahendriks1 11 месяцев назад

      There are 2 versions. One with shorter barrel and comp in the slide, and the other that has longer barrel and no comp.

  • @MrFrenchHarp
    @MrFrenchHarp Год назад

    Adding that ledge, stat!

  • @Cembruh
    @Cembruh Год назад

    What holster are you using?

  • @mikejmardis
    @mikejmardis Месяц назад

    The yellow depicts the spring weight. Not orientation.

  • @anthonyrondolino8148
    @anthonyrondolino8148 Год назад +1

    How to turn a compact ccw into a full size gun…

    • @andershilmo1866
      @andershilmo1866 Год назад

      This is true lol. I am torn between building a fez works xxl slide macro with a Icarus prediction and just custom building A p320 compact lol. With similar components.

  • @eastoakland-S65feen
    @eastoakland-S65feen Год назад

    Do you know if you can get that same barrel but not threaded & 3.1"....?

  • @markanthony3995
    @markanthony3995 Год назад

    Great info! Thank you for sharing!!

  • @fabianclercin6410
    @fabianclercin6410 Год назад

    Hi can the pro ledge be used on either side. Incase your a lefty.

    • @clutchmaster_
      @clutchmaster_  Год назад

      When you purchase the pro ledge you select what side you need.

  • @porteneur1
    @porteneur1 Год назад

    um how do you holster with a Pro ledge? asking for a friend.

    • @clutchmaster_
      @clutchmaster_  Год назад +1

      I have been trying to get in contact with mckinatec to see if they will be producing something to work with the new pro ledge. They have options for the original pro ledge, icarus grip, TLR sub, and many more options. Just cant seem to get a hold of them.

    • @porteneur1
      @porteneur1 Год назад

      @clutchmaster_ good luck. Awsome feature

  • @edward463
    @edward463 Год назад

    What’s the purpose of the pro ledge?

    • @clutchmaster_
      @clutchmaster_  Год назад +1

      Its a gas pedal to help with recoil. Works really good for thumb placement. I highly recommend it for the price.

  • @Codinferno
    @Codinferno 6 месяцев назад

    I have never seen this video before yet ironically that is every single upgrade that I have on my macro 😂

  • @Rod2Reel
    @Rod2Reel Год назад

    Holster recommendations? I just got mine last week!

    • @clutchmaster_
      @clutchmaster_  Год назад +1

      I have my eyes on www.mckinatec.com because they incorporate almost every upgrade I have on the XM but the comp. I plan on reaching out to them with all upgrades to see if they can provide a perfect fit.

    • @loganbeard9423
      @loganbeard9423 Год назад

      The ledge will fit too? I already ordered a T1C Axis holster but I’m gonna assume the ledge won’t fit in that holster.

    • @clutchmaster_
      @clutchmaster_  Год назад

      @@loganbeard9423 They make holsters with pro ledge as an option. The TLR7 sub 1913 pro ledge is new but they will add that as an option I'm sure.

  • @davids5357
    @davids5357 Год назад

    Have you done any trigger upgrades to it?

    • @davids5357
      @davids5357 Год назад

      @@MrSPHANDLE that doesn't explain why. A lot of online forums say to change it.

  • @isaiahcraig8022
    @isaiahcraig8022 Год назад

    Did you get the optics ready tacops?

    • @isaiahcraig8022
      @isaiahcraig8022 Год назад

      Because mine doesn’t have suppressor height sights like yours

    • @jeffmurphy9987
      @jeffmurphy9987 11 месяцев назад

      @@isaiahcraig8022you don’t want the suppressor sights on the Tacops their to tall and block your sight picture. If anything you want 1/3 witness I think Night Fision makes them.

  • @bravalin8872
    @bravalin8872 Год назад

    That looks amazing

  • @brianmanning9271
    @brianmanning9271 Год назад

    Put an extended mag on their and you have something the size of an mpx.

  • @srtufc420
    @srtufc420 Год назад

    Does it co witness with that red dot?

    • @clutchmaster_
      @clutchmaster_  Год назад +1

      Yes it co witnesses perfectly. Didn't even have to zero in the optic with live ammo.

    • @rahendriks1
      @rahendriks1 11 месяцев назад

      @@clutchmaster_ - only with tac ops sights... just sayin

  • @riv1724
    @riv1724 Год назад

    what irons are those

    • @clutchmaster_
      @clutchmaster_  Год назад

      The x-macro tac ops comes with suppressor height iron sights. Makes for a great co-witness.

  • @bbmw9029
    @bbmw9029 Год назад +1

    Did you add the suppressor height sights, or did they come with the gun?

    • @clutchmaster_
      @clutchmaster_  Год назад

      SS sights come with it. Makes for a great co-witness!

  • @Goodluck-hd5gp
    @Goodluck-hd5gp Год назад +12

    And bam a gun as long as a glock 17 but not nearly as comfortable to shoot 😂 what was wrong with the x macro as it is?

    • @michaelclark3999
      @michaelclark3999 Год назад

      absolutely nothing. With all that it's going to be more uncomfortable to carry to

    • @clutchmaster_
      @clutchmaster_  Год назад +1

      I have a very unorthodox way of carrying/EDC compared to the rest of the world. Video on that coming soon.

    • @clutchmaster_
      @clutchmaster_  Год назад

      I haven't shot the original macro and when I went to buy one I saw this. I'm not really a fan of the "integrated" comp to be honest. I'm sure it shoots great but I wanted a fixed comp with a threaded barrel for more options.

    • @S.0.G
      @S.0.G Год назад +10

      But the 17 is twice as thick with the same capacity. And with the macro you've not only got the option to build up to the size of a 17 but also build down to the size of a 26 lol P365 platform is hands down outdoing every other platform. Not saying sig is a better company than Glock cuz I love Glock but sig is on their A game

    • @MahoneyBadger
      @MahoneyBadger Год назад +5

      Glock? Comfortable?

  • @cjlos2050sp
    @cjlos2050sp 3 месяца назад

    This was me when I first turned 21 and bought my first pistol lol

  • @josefrausto1638
    @josefrausto1638 Год назад

    You have s rail should've just got tlr7a

    • @nickadkins7765
      @nickadkins7765 Год назад +1

      Holster options are better with the TLR7 sub and the macro

  • @09cjc03
    @09cjc03 Год назад

    looks dope, but good luck finding a holster for that bad boy lol

    • @clutchmaster_
      @clutchmaster_  Год назад

      @@MrSPHANDLE I reached out to McKinaTec holsters because they seem to cover everything I need but never heard back from them.

  • @loganbeard9423
    @loganbeard9423 Год назад

    Any reason to pick the TLR7 over the TLR7a?

    • @clutchmaster_
      @clutchmaster_  Год назад +1

      I got the TLR7 sub 1913 so the pro ledge is part of the light instead of attached to the rail. The 1913 key with the pro ledge makes it a tight fit.

    • @invalidkicks3621
      @invalidkicks3621 Год назад

      because the sub is smaller than the a. and looks 10x better on the macro

    • @loganbeard9423
      @loganbeard9423 Год назад +1

      @@invalidkicks3621 looks alright if you get the key that allows you to mount it closer to the trigger guard but then you limit holster options quite a bit. Also I think the 7a looks significantly better on the macro.

  • @joebech9721
    @joebech9721 10 месяцев назад

    When using blue locate, just a small drop. You used way too much

  • @subarutime5089
    @subarutime5089 Год назад

    Comps help to make your gun less reliable that's cool 😎

    • @nickadkins7765
      @nickadkins7765 Год назад

      If it's a well made piece it actually doesn't 😎

    • @subarutime5089
      @subarutime5089 Год назад

      @@nickadkins7765 it's a" grand thumb"quote not mine 😂

    • @nickadkins7765
      @nickadkins7765 Год назад +2

      @@subarutime5089 oh I like his stuff, but I'll have to admit that's a dumb quote lol

  • @minjagaming2629
    @minjagaming2629 Год назад

    Where the shooting video

    • @clutchmaster_
      @clutchmaster_  Год назад

      Just filmed it over the weekend. Just have to edit and post now. Should be up in a couple of days. Sorry for the delay.

  • @DiegoRocha-fp6lf
    @DiegoRocha-fp6lf Год назад

    Top!!!

  • @Diddley-js6lf
    @Diddley-js6lf Год назад

    I have the Mats

  • @troopernate8046
    @troopernate8046 Год назад

    cool

  • @Fajah69
    @Fajah69 10 месяцев назад

    The total cost of the upgrades is probably more than the gun itself.

  • @DS..69
    @DS..69 Год назад

    Way to much extra for a CCW gun. These extras better suited for a compact and up. House gun.

  • @DJGonzoNYC
    @DJGonzoNYC 6 месяцев назад

    X macro comp… from the factory

  • @danjarmusik878
    @danjarmusik878 Год назад +1

    It's nice don't get me wrong but if you need all those upgrades to shoot well you need to go back to the basics and get your fundentals down

    • @clutchmaster_
      @clutchmaster_  Год назад

      I did it for the Tube 😆Love the firearm stock but maybe now ill love it even more.

    • @nickadkins7765
      @nickadkins7765 Год назад +2

      Those aren't mods to make him shoot well, It's to make a good shooter better, and everyone likes to personalize their firearms to make them truly theirs. At least I do

  • @jimmypaulgaard3644
    @jimmypaulgaard3644 13 дней назад

    So you make videos and don’t answer questions? About half the people in the comments asked what holster. Pretty weak not answering