Those tank cars are marked ‘molten Sulphur’ so Sulphur needs to be between 275°-365°. Any colder than that it’s solid and any hotter than that it’s a solid as well ‘cept when it’s above ~380° it’ll set up like concrete to less likely to become ‘molten’ or fluid or liquid. If there’s four hoses attached to the car that means there’s two circuits or zones in that car, a supply and return for each circuit. Steam at 15# will yield a temp of ~240° like in your mamas kitchen pressure cooker. Not hot enuf. By using a trap regulator that removes the condensate from the steam and regulates the pressure. The higher the pressure the higher the temperature. A simple set up like that there can max out at about 480°. There you go, the more you know😊
It's driver error because they don't want to fix their mistakes for free. I didn't comment on that video, but that's the first thing that came to mind when he was spinning bs. I'm guessing they will try and blame your driving again on the clutch. First load on the new fix and you have a problem, they need to make it right and do it for free. If they don't, sue them and make sure you add all the work you missed because of their mistakes and get your laywer fees back as well make sure they pay your attorney fees, no fault of yours that they do sh!t work.
I think they put an 1650 clutch instead of 2050 or 2250 even BETTER!!!!!! DEFINITELY would not be using them again if I were U!!!!!! That's DEFINITELY B/S & not an Gr8 way 2 treat customers
Oh and one more thing. About that transmission, if u have similar problems whit the new one, then it it could be driver error with that big long stick. I ain’t a fan of that but your airlines for ur shifters maybe too long for the volume of air needed to move those forks. With that long stick u may need to increase the diameter of the air hose in the shifter. Just sayin. I’ve drove many miles over many years mainly in the west, hilly mountainous terrain and never messed up a gearbox like that. Just saying🤷
Hey bro I seen you in a truck video from 2022 pulling a step deck I said I was going to ask if that was you on the( truck spotting in Walcott video )and I said to myself I know that truck anywhere or you do have a twin ,and I heard a horn blow as the truck passed to turning in the truck stop 💪🏆🫡
If that was on largecar it would of been me. I went out that way pulling my step deck an went to the "no coast" truck show and I did stop over in walcott.
it's steam they use it to heat the rail cars and the clean and clear lines and pumps
Thank you
It cool running across you in the new Orleans area today. ✌🏼
Yes sir it was. Thank you for shouting out at me. Wish I had the camera going.
Those tank cars are marked ‘molten Sulphur’ so Sulphur needs to be between 275°-365°. Any colder than that it’s solid and any hotter than that it’s a solid as well ‘cept when it’s above ~380° it’ll set up like concrete to less likely to become ‘molten’ or fluid or liquid. If there’s four hoses attached to the car that means there’s two circuits or zones in that car, a supply and return for each circuit. Steam at 15# will yield a temp of ~240° like in your mamas kitchen pressure cooker. Not hot enuf. By using a trap regulator that removes the condensate from the steam and regulates the pressure. The higher the pressure the higher the temperature. A simple set up like that there can max out at about 480°. There you go, the more you know😊
Thank you for that information.
It's driver error because they don't want to fix their mistakes for free. I didn't comment on that video, but that's the first thing that came to mind when he was spinning bs. I'm guessing they will try and blame your driving again on the clutch. First load on the new fix and you have a problem, they need to make it right and do it for free. If they don't, sue them and make sure you add all the work you missed because of their mistakes and get your laywer fees back as well make sure they pay your attorney fees, no fault of yours that they do sh!t work.
They jumped right on me today and it didn't cost me a dime.
@@JunkyardDog001 good, that's the way it should be!!!
🤣🤣that's great, hey what are friends for👍✌
It’s to keep the product in the rail car hot by steaming it.
Hey junkyard i really hope you get your truck right be safe out there😊
The X-tra lites on the rear of wagon & quarter fenders gonna be on point FAM
Mash that like button !!!
That shop is not doin QUALITY wrk & DEFINITELY not standing by their wrk!!!!!!😬🙄🤯😫😤😡😠🤬
I think they put an 1650 clutch instead of 2050 or 2250 even BETTER!!!!!! DEFINITELY would not be using them again if I were U!!!!!! That's DEFINITELY B/S & not an Gr8 way 2 treat customers
Oh and one more thing. About that transmission, if u have similar problems whit the new one, then it it could be driver error with that big long stick. I ain’t a fan of that but your airlines for ur shifters maybe too long for the volume of air needed to move those forks. With that long stick u may need to increase the diameter of the air hose in the shifter. Just sayin. I’ve drove many miles over many years mainly in the west, hilly mountainous terrain and never messed up a gearbox like that. Just saying🤷
Thank you for the input. I've driven a lot myself and have never had issues either. I knew something was still wrong with it from the jump.
I work not to far from yara that fog was terrible the other day
Yes it was. I will be picking back up there in the morning.
Driver error my but
Hi Junkyard Dog
Hey bro I seen you in a truck video from 2022 pulling a step deck I said I was going to ask if that was you on the( truck spotting in Walcott video )and I said to myself I know that truck anywhere or you do have a twin ,and I heard a horn blow as the truck passed to turning in the truck stop 💪🏆🫡
If that was on largecar it would of been me. I went out that way pulling my step deck an went to the "no coast" truck show and I did stop over in walcott.
@@JunkyardDog001 ok I'm sure it was you but peace love and blessings brother to you and your family I'm looking forward to more videos 💪🏆🫡
Driver Error
😁😁😂
Landon says hey to Mr JT
Tell Landon thank you an I said HEY! Hope to see him again soon. I travel 75 a lot.
Haven't made it to the halfway mark bit at least that leaves u 900lbs for fuel
36:00.......Lawsuit time driver if they don't wanna make it right
Need email or etc so we can txt offline or etc