OWWWW MR. AFTER I UPDATED FIRMWARE V6.25 MY SCOPE WAS NOT CONNECTED AGAIN! "DON`T TURN ON AGAIN" I AM DOING ALL THE PROCEDURES LIKE PRESSING THE RESET BUTTON FOR 10 SECONDS! NOTHING HAPPENED! I E-MAIL WANNEY SUPPORT! AND I WILL WAIT AN ANSWER! ANSWER! WOULD YOU KNOW ANY OTHER PROCEDURES I CAN TRY? BECAUSE SCOPE DOES NOT WORK ANYMORE! THAK'S FOR HELP ME .
@@thomail Morning Thomate, Sounds like a firmware update failure, this I have heard happend before, very similar when you update smartphone and failed. Yes email them is the right way to do, they have mentioned to me several user had similar sort of issues before (some part of the procedure people didn't realize they need to follow, bit tricky, sometimes just unlucky) I think they will guide you to have the scope restored. If you haven't heard from them after 24 hours, just email market@wanney.com, I contact them through this email. Hopefully you are back in action very soon. Cheers
Hey mate, thanks! Yeah it's a good piece of equipment. For the price can't complain. I suggest get some used to in day light, first night out can be problematic but take your time you will get there. Best of luck!
Friend I want to know, after setting it to zero what other operation I should Do to make other shots at different distances or did you automatically aim at the center of the reticle and it corrects itself?
i own one of these and have a problem with it not showing at the bottom of the screen "now zeroing" and its been randomly changing x and y after i set the crosshairs on the bullet hole i just shot...also can u use this procedure on 2x zoom or does it have to be done is the method you showed us on this video...i have more questions but i dont know the extent of your knowledge on this product. thank u for posting this videe
Hi mate, Sorry to reply so late. I think the problem of your unit is the software wasn't updated. Wanney at the time relased about 2-3 upgrade packs which was based on customers suggestion. Including this 8 sec ""now zero"" function aim to ease the zeroing process. If you still have questions I can try to assist you. I m not the technical expert about the product but I do know the owner of Wanney. He's a kind and well knowledged man always answers my enquiries. Cheers.
Is the scope live-view screen (image) is 1K (1080P) or better? The magnification from 50m from your video, one CAN NOT see the .22 on target. Can zoom up to 50X? Battery is user changeable or not like the lousy overpriced ATN's?
Hi mate, 1080p, the magnification is around 6x, the new firmware upgrade allow you to electronic magnify it 3 times (2x, 2x, 2x like smartphone, it gets very blurry at highest though) which is handy, I was able to barely see my .22 hole at 100m daylight. Night time forget about it, to much consideration and software caculation gets in the way, and what present to the screen at the end differs every time. Zoom 50x won't make it any better because you are just magnifying the pixel. Battery is two 18650 battery, you can't take it out to charge, you plug cable to it's type C socket. Hope this helps, Merry Christmas!
Здравствуйте, в зависимости от того, какое обновление прошивки установлено на вашем прицеле, я рекомендую вам сначала обновить его до последней версии. Перейдите на вкладку загрузки веб-сайта wanney, чтобы найти обновление. После обновления вам нужно просто нажать и удерживать кнопку Shift в течение 10 секунд, чтобы войти в «режим обнуления», где теперь вы можете использовать клавиши со стрелками для перемещения сетки вверх и вниз. Однако, если это не сработает, проверьте версию прошивки и обратитесь к руководству по соответствующей версии на веб-сайте. Хотя должно быть легко. Надеюсь это поможет!
Привет, Ну, это нехорошо, но давайте решим эту проблему. Скажите мне, когда вы нажимаете кнопку Shift, какой экран вы выбрали, потому что у некоторых из них просто перекрестие посередине, но никакая другая информация не отображается внизу экрана. Вам нужно несколько раз нажать Enter, чтобы перейти к экрану, на котором отображается дополнительная информация (их два или три, подойдет любой). Теперь нажмите кнопку Shift и удерживайте ее 20 секунд, пока не увидите надпись «Теперь обнуление». Если ничего не появляется, попробуйте нажать стрелку вверх вниз влево вправо, любую из них, если на экране отображаются такие вещи, как Вверх - 4, Вниз - 3, вы фактически уже находитесь в режиме обнуления, просто он как-то не отображается. Попробуйте это сначала, пожалуйста, и дайте мне знать, хорошо? спасибо
@@ВоваМорев-м7ц Здравствуйте, я рад слышать, что все получилось. Да, этот прицел очень хорош за свою цену. Позже я купил клипон ночного видения GEN 2, немецкий продукт, надел у моего друга высококачественный тактический прицел Steiner (тоже немецкий), на 100 м WANNEY легко побеждает комбинацию GEN 2, даже я даю GEN 2 лазерный ИК-фонарик для освещения. . Цифровое ночное видение, такое как WANNEY (на мой взгляд, лучшее за эти деньги), имеет гораздо более высокую четкость и изначально было сделано для адаптера ИК-подсветки. Вы найдете больше функций в приложении, я надеюсь, вам понравится. Ваше здоровье.
Hi mate Bought one of these so watched your video on sighting in and you say 50yards/meters. This is OK for centerfires and powder burners ect ect but am planning to put it on a UK 12ftlbs air rifle for ratting at between 15 and 30 yards how do I calibrate it for these distances and power? Cheers phil
Hi Phil, I never mount it on air rifle before but I know it can take its recoil. The zeroing method in principle I believe should be similar. Stay with me since this is going to be a long reply. Before we start, beware you may need to do a scope firmware update to use the zeroing method I mentioned below. Some of the scopes were still using the very old firmware where the controls were assigned differently. At this time V6.25 is the latest firmware for the scope and the V6.26 is coming up very shortly according to my information. Regarding how to update it follow the instruction on the website you should be fine. www.wanney.com/Download For the zeroing paper, Wanney has taken my zeroing sheet design and changed it a bit. hk2dabb7-pic33.websiteonline.cn/upload/20211117-E5X50MZERODESIGN-V41-A4.pdf They call the windage “X” (which is the x axis) and elevation “Y” (which is the y axis), essentially same to the coordinate grid in math. Note its two page and each suits different environment so print both. What you need to know is X+ is to move the impact point to left, X- is right, Y+ is to move the impact point up, Y- is down. So, if my impact point on the zeroing paper is (x+21, y-17) which is on the top right corner, I need to use the right arrow key to do +21 and up arrow key to do -17 in order to zero. Now, this zeroing paper is designed for zeroing at 50m, but to use it for 30m I believe all you need to do is doubling or 1.5x the input. So, say your impact point on the zeroing paper is still (x+21, y-17), you should use the right arrow key to do +32 ( 21x1.5=31.5) and up arrow key to do -26 ( 17x1.5=25.5) in order to zero. You may have to fine tune a bit but essentially that’s the gesture. Oh, regarding execute the "Zeroing" command through the scope, you still just press and hold the "Shift" button for 10 seconds (Older firmware was 8 seconds, just hold it until you see something popped down the bottom of your screen, if nothing happens, you need to check your firmware, maybe very old) then you should see the "Now zeroing" pops up and you are able to adjust your elevation and windage compensations. I haven't used that for a while since I was doing it that in the APP because that's more user friendly for me, especially the fact you can see what your current elevation and windage number is (It actually display as and you can do + or - with the APP faster. And you can save that data in the file. If you interested to use the APP, then there is another way but that requires you to input all the correct ballistic related data of your rifle and ammo in to the APP. Say if you done that or did a valid best estimate input (by valid I mean you can test it out somehow). You can simply change the zeroing figure from 50m to any reasonable distance you desire and the reticle center will adjust to the new zeroing distance just like that. I can give your more detail should you want to test it out. Well, I hope this infor helps you out, let me know how you go, cheers!
Thank you for this post. I bought one of these and you post was instrumental in getting mine up and running correctly. Happy with the scope now.@@stillwindops2438
iam deciding to purchase this one you revived or the PQ1W not sure you know that one. but still i have to ask you if you would buy wanney again or you would go for something different ?
Hi yovi, Very good question! Let me share with you my view. For me, my budget was $1000 Aussie dollar (about 700 USD)，my wife will kill me if I want to spend more than that. If money isn't an issue then I want to buy Gen 2+ or Gen 3 analog NV scope, I think they will be so much easier to use and perform much better. But if 700 USD is your budget, night hunting is what you intend to do, and you don't need military grade impact and water proof, willing to operate the complex controls like operating a smart phone, then go with Digital NV with a built in 940um IR flash light (940um light animal and human eye bearly able to see compare to a red glowing 850um which is very visible) Performance wise (see and recognize an animal 100-200 away) I think they better than analog Nv Gen1.5/Gen Core, the compromise is battery power, rigidness, and ease of use. I don't think any of them is easy to use and you just have to learn how to operate them. The videos I made for this wanney scope is actually manual not review, because the manual handbook sucks. I already bought the scope and want to utilize it properly and I thought they are people out there like me, that's why I did these videos. Since I haven't seen the PQ1W scope you mentioned I can't comment on that. With my limited experience with these Digital NV scopes I think they share a lot of similarities, just pick the one you like, if there are videos teach you how to zero the scope that's a big plus, that's always the hardest part. And will I buy wanney again? Yes is the answer. Because I have spent enough time and have learned how to use it properly know. Some features I want but it doesn't have, and its complicate to operate sometimes. But for the money I can't complain (you get what you paid for), and it works for my need. This E53 is their 3rd generation product, and it did improve a long way. (I have seen their 1st gen product on the gun show years ago and that was bad, a torture to play with) so they are learning too, I do look forward to see their next scope. Hope this helps, cheers.
Hola amigo, no estoy seguro de lo que estás preguntando. Supongo que preguntas cómo grabo el video. Si esa es la pregunta, el visor del rifle en sí tiene una función de grabación de video. En gran medida, es como un teléfono inteligente con función de visor de rifle. Eche un vistazo a este video que hice para ayudarlo a comprender mejor. ruclips.net/video/y51hjycxqFA/видео.html Conseguí el mío de Amazon. Gracias.
Hi Sr. Talk more about the ballistics calculator parameters please!I I looked for more info on the wanney site, but it's too poor of content or no info to use! there are no instructions on how to set or use the scope! the only reference is your channel's video. Brazil whatching you! thank you.
Hi mate, I am currently working on the App video, bit complicated but fun to explore and takes a while to do. Hopefully will upload it next week. As for the ballistic caculation it's going to be a separate video and I need more time to do it right. But I will try to give you some brief content in the next couple of days. Cheers.
Hi Thomate, Greetings from Australia, I haven't forgot about you. Just been busy with the young kid and learning the ballistic caculator, also there is new App update from Wanney that suppose to allow you save multiple zeros information. My understanding is you can save zero for different ammo in same caliber and even for different calibers. (Need to verify). I understand the basics of the ballistic now and will write you some key points around this weekend. I plan to make a video about it maybe end of December or next year January because I need someone to verify in practice (I don't have the time nor the skill) A friend has already agree to test it on a .308w in December for me. So let's see how that go. Cheers!
Hi Thomate, Here is the ballistic calculation information you have been waiting for. 1st thing is update your APP to the latest version V1.22 Android, iOS not sure may be later. I haven’t test it myself which a friend will help me in December, so everything I told you is what I gathered from emails with Wanney. I think I got them right but please don’t blame me if incorrect. Trajectory Parameter： Suitable for shooting in stationed position, all parameter has effects on trajectory. Target Range, assume you zeroed at 50m as recommended, this change the middle aim point to the distance of your choice. Set it to the distance you want to shoot eg.100m, 200m Target Angle, input what’s on the right corner of the screen, aim upslope is “+” number, downslope is “-” Wind Velocity is to set muzzle wind (wind near muzzle) in meter per second m/s or mile per hour miles/hours where wind from left to right (3 o’clock to 9 o’clock) is “+” number, wind from right to left (9 o’clock to 3 o’clock) is “-” number. Relative Humidity affects air drag on the projectile, if not sure set at 85% (it’s considered a relatively average number), but its recommend to know the correct number, a hygrometer is handy to have. Default resets all setting should you want to start over. Trajectory Parameters Setup, Target range parameter is the only setting once changed is saved instantly, the other parameters does not save until you press this Trajectory Parameters Setup button.
Bullet Information： Every correct information makes the calculation more accurate, some information not so accurate does not have huge impact, and however some information if totally wrong will cause significate difference. Better get it right strong effect on calculation. Ballistic Coefficient, this data you should be able to find out from the cartridge manufacture’s website such as Winchester or Federal. Note cartridge such as most of standard velocity .22LR where the ballistic coefficient is lower than 0.2, this parameter is unable to compensate since 0.2 is lowest it can go, but you wouldn’t shoot .22LR too far anyways I suppose. Ballistic Model, again google it, but mostly if its round head like .22LR or 9mm parabellum choose G1, if its convex tip like .223REM or .308Win choose G7. Bullet Caliber, this I don’t think anyone have trouble with. Muzzle Velocity, this you will need get a ballistic chronograph to find out and record it yourself. I don’t have one so I will get a friend to help later. One theory I am trying to work on is to take an average number online, say the velocity of a .308W federal metal gold which is tested with 24” barrel and reduce a bit on that (I use 168gr with 20” barrel so my velocity is definitely going to be lower). So far from what I have been told. If the correct velocity 650 m/s but you input 620 m/s in the calculation, your bullet impact point will be higher than what it should be. So maybe you can try to educated guess your correct muzzle velocity. I will try to verify that later, it’s still just a theory at the moment. Bullet Weight, this I don’t think anyone have trouble with. Default, resets all setting should you want to start over. Load, load a Bullet Information file where you previous saved. Save, save this Bullet Information file with a specific name, like .22LR Win Power point or .308W Federal M Gold. (switching between guns is what I am thinking ^^) Bullet Infor Setup, nothing is saved until you press this Bullet Infor Setup button. Password is 876543210 Zeroing Yes you can input zeroing set up here instead of on the scope. Best check my zeroing videos first. Whats worth mention is CursorX (which is elevation has 180 PIXELs. How much when convert to MOA or MIL, not sure, let me check and get back to you later.) CurosrY (which is windage has 360 PIXELs, yes it’s funny it has way more adjustment units than elevation, but it’s because of the shape of the screen ^^). X + is left, X - is right, Y+ is up Y - is down. And you can save zero setting now (the important update in this APP update) just like bullet information which is cool. I hope this helps, cheers!
falo a regulagem e fica perfeito porem quando desligo e ligo novamente volta na regulagem zero , não fica salvo a regulagem anterior ,como faço para regular e salvar a regulagem e assim quando religar permanecer regulada
E aí cara, Se o ajuste for feito através do teclado, ele será salvo automaticamente depois de configurado. Foi-me dito que havia um bug com o firmware do escopo 6.27 que corresponde ao que você descreveu. Este bug foi corrigido na atualização de firmware 6.28. Então vamos atualizar o firmware do seu osciloscópio para 6.28 e seu problema deve ser resolvido, aplausos.
@@stillwindops2438 agradeço sua atenção e retorno ,deu tudo certo atualizei e a luneta ficou perfeita e agora após a zeragem desliguei e liguei novamente e se manteve regulada ,,,,muito obrigado
Hola, lamento responderte tarde, no vi tu mensaje antes. Bueno, todos estos alcances digitales tienen sus características publicitarias especiales, he escuchado y visto algunos otros y puedo decirles que este que obtuve es bastante bueno por el precio. 3 razones: 1. Por el dinero, sus características clave son sólidas. 2. Su software se desarrolló internamente, su actualización desbloqueó algunas funciones útiles, como una nueva retícula y zooms. 3. Hace un tiempo que se confía en él (2-3 años) y es bastante maduro, la mayoría de los errores se corrigieron ahora, lo que en realidad es importante para que funcione de manera confiable en el campo. Pero, de nuevo, lo más importante depende de tu corazón, en cuanto a lo que es más importante para ti. Espero que esto ayude. Saludos Robbie
Hi I have bought one of the E50 II scopes and was trying to find the link to the target sheet but could not find it can you please send the link thanks
Hi mate, sorry I wasn't able to reply at the time. Had my first daughter and wasn't able to attend anything else for a while. I did pass on the excel spreadsheet to the owner of Wanney and I believe they upgrade that to a A3 sized spreadsheet which now came with the product. If you still want the original A4 sized sheet I can try to email you. Cheers.
Olá, Desculpe responder tão tarde, o trabalho tem sido uma loucura. Não, este escopo não tem telêmetro a laser. Ele tem uma mira que pode ajudar na estimativa de alcance, muito parecido com um sistema de alcance MILDOT refinado ou detalhado, mas infelizmente não é um telêmetro a laser (eu gostaria que tivesse, mas por esse preço). Espero que isto ajude.
Hi Andre, Stay with me since this is going to be a long reply. Before we start, beware you may need to do a scope firmware update to use the zeroing method I mentioned below. Some of the scopes were still using the very old firmware where the controls were assigned differently. We are now at version 6.27 which is a very good upgrade, a few new features I found it very interesting. Regarding how to update it follow the instruction on the website you should be fine. www.wanney.com/Download For the zeroing paper, Wanney has taken my zeroing sheet design and changed it a bit. hk2dabb7-pic33.websiteonline.cn/upload/20211117-E5X50MZERODESIGN-V41-A4.pdf They call the windage “X” (which is the x axis) and elevation “Y” (which is the y axis), essentially same to the coordinate grid in math. Note its two page and each suits different environment so print both. What you need to know is X+ is to move the impact point to left, X- is right, Y+ is to move the impact point up, Y- is down. So, For example, if my impact point on the zeroing paper is (x+21, y-17) which is on the top right corner, I need to use the right arrow key to do +21 and up arrow key to do -17 in order to zero. Now, this zeroing paper is designed for zeroing at 50m, but to use it for 25m I believe all you need to do is doubling the input. So, say your impact point on the zeroing paper is still (x+21, y-17), you should use the right arrow key to do +42 ( 21x2=42) and up arrow key to do -34 ( 17x2=34) in order to zero. You may have to fine tune a bit but essentially that’s the gesture. Oh, regarding execute the "Zeroing" command through the scope, you still just press and hold the "Shift" button for 10 seconds (Older firmware was 8 seconds, just hold it until you see something popped down the bottom of your screen, if nothing happens, you need to check your firmware, maybe very old) then you should see the "Now zeroing" pops up and you are able to adjust your elevation and windage compensations. I haven't used that for a while since I was doing it that in the APP because that's more user friendly for me, especially the fact you can see what your current elevation and windage number is (It actually display as and you can do + or - with the APP faster. And you can save that data in the file. If you interested to use the APP, then there is another way but that requires you to input all the correct ballistic related data of your rifle and ammo in to the APP. Say if you done that or did a valid best estimate input (by valid I mean you can test it out somehow). You can simply change the zeroing figure from 50m to any reasonable distance you desire and the reticle center will adjust to the new zeroing distance just like that. I can give your more detail should you want to test it out. Well, I hope this infor helps you out, let me know how you go, cheers!
@@woop3r88 Hi Andre, You are right as the App hasn't got the latest caliber list which includes .17. The latest scope firmware however has the caliber list start with .15. So if you have updated the firmware of the scope to the latest version. You can press the menu key a few times until you see the Menu display, inside you will see the ballistic setup where you can key in 017 for the caliber. Pretty sure they will update the App later to have the listing updated too. Hope this helps, cheers!
Hola amigo, necesitas cambiar la configuración de tu sentido. 0 es el modo de color para la luz del día, 1-3 es el modo de noche, para obtener más detalles, vea este video ruclips.net/video/y51hjycxqFA/видео.html a partir de las 04:00, espero que esto ayude. Gracias
Привет, извини, я не говорю по-русски. Надеюсь, этот перевод Google поможет. Я знаю, что есть российские заказчики, которые тщательно тестировали этот продукт (более 12,7 мм, насколько я слышал). Я полагаю, что в вашей стране есть дистрибьюторы, у которых уже есть обновленные знания об этом. По сути, важно то, что высота и ветер всегда обратные, поэтому нажатие стрелки вверх приводит к тому, что точка удара падает. и всего 4 нажатия кнопки перемещают точку удара на 1 см на 50 м. Эта электронная таблица Excel просто пытается избавить вас от лишних мыслей во время калибровки. Надеюсь, это поможет.
FYI www.wanney.com/Download
Zeroing target V3.1 pdf, thats the A4 size paper I used, wanney has refined it a little bit.
Nice ,Nice ,Nice Mr. :}
OWWWW MR. AFTER I UPDATED FIRMWARE V6.25 MY SCOPE WAS NOT CONNECTED AGAIN!
"DON`T TURN ON AGAIN" I AM DOING ALL THE PROCEDURES LIKE PRESSING THE RESET BUTTON FOR 10 SECONDS! NOTHING HAPPENED! I E-MAIL WANNEY SUPPORT! AND I WILL WAIT AN ANSWER! ANSWER!
WOULD YOU KNOW ANY OTHER PROCEDURES I CAN TRY? BECAUSE SCOPE DOES NOT WORK ANYMORE! THAK'S FOR HELP ME .
@@thomail Morning Thomate, Sounds like a firmware update failure, this I have heard happend before, very similar when you update smartphone and failed. Yes email them is the right way to do, they have mentioned to me several user had similar sort of issues before (some part of the procedure people didn't realize they need to follow, bit tricky, sometimes just unlucky) I think they will guide you to have the scope restored. If you haven't heard from them after 24 hours, just email market@wanney.com, I contact them through this email.
Hopefully you are back in action very soon.
Cheers
Gday again mate. Another great vid. Thanks.
I just bought one. It’s inbound. Hopefully it’s as easy to use as u make it look.
Hey mate, thanks! Yeah it's a good piece of equipment. For the price can't complain. I suggest get some used to in day light, first night out can be problematic but take your time you will get there. Best of luck!
thanks for the great help friend!!! cheers!!!
Friend I want to know, after setting it to zero what other operation I should Do to make other shots at different distances or did you automatically aim at the center of the reticle and it corrects itself?
i own one of these and have a problem with it not showing at the bottom of the screen "now zeroing" and its been randomly changing x and y after i set the crosshairs on the bullet hole i just shot...also can u use this procedure on 2x zoom or does it have to be done is the method you showed us on this video...i have more questions but i dont know the extent of your knowledge on this product. thank u for posting this videe
Hi mate, Sorry to reply so late. I think the problem of your unit is the software wasn't updated. Wanney at the time relased about 2-3 upgrade packs which was based on customers suggestion. Including this 8 sec ""now zero"" function aim to ease the zeroing process. If you still have questions I can try to assist you. I m not the technical expert about the product but I do know the owner of Wanney. He's a kind and well knowledged man always answers my enquiries. Cheers.
What is the cost of this night vision and can you get it delivered in India?
Is the scope live-view screen (image) is 1K (1080P) or better?
The magnification from 50m from your video, one CAN NOT see the .22 on target. Can zoom up to 50X?
Battery is user changeable or not like the lousy overpriced ATN's?
Hi mate, 1080p, the magnification is around 6x, the new firmware upgrade allow you to electronic magnify it 3 times (2x, 2x, 2x like smartphone, it gets very blurry at highest though) which is handy, I was able to barely see my .22 hole at 100m daylight. Night time forget about it, to much consideration and software caculation gets in the way, and what present to the screen at the end differs every time. Zoom 50x won't make it any better because you are just magnifying the pixel.
Battery is two 18650 battery, you can't take it out to charge, you plug cable to it's type C socket.
Hope this helps, Merry Christmas!
Здраствуйте, а на какие кнопки нажимать что бы передвигать прицельную сетку?
Здравствуйте, в зависимости от того, какое обновление прошивки установлено на вашем прицеле, я рекомендую вам сначала обновить его до последней версии. Перейдите на вкладку загрузки веб-сайта wanney, чтобы найти обновление. После обновления вам нужно просто нажать и удерживать кнопку Shift в течение 10 секунд, чтобы войти в «режим обнуления», где теперь вы можете использовать клавиши со стрелками для перемещения сетки вверх и вниз. Однако, если это не сработает, проверьте версию прошивки и обратитесь к руководству по соответствующей версии на веб-сайте. Хотя должно быть легко.
Надеюсь это поможет!
@@stillwindops2438 всë сделал так же как вы написали, да, на последней прошивке открылось много функций которых не было
Привет,
Ну, это нехорошо, но давайте решим эту проблему.
Скажите мне, когда вы нажимаете кнопку Shift, какой экран вы выбрали, потому что у некоторых из них просто перекрестие посередине, но никакая другая информация не отображается внизу экрана. Вам нужно несколько раз нажать Enter, чтобы перейти к экрану, на котором отображается дополнительная информация (их два или три, подойдет любой). Теперь нажмите кнопку Shift и удерживайте ее 20 секунд, пока не увидите надпись «Теперь обнуление». Если ничего не появляется, попробуйте нажать стрелку вверх вниз влево вправо, любую из них, если на экране отображаются такие вещи, как Вверх - 4, Вниз - 3, вы фактически уже находитесь в режиме обнуления, просто он как-то не отображается. Попробуйте это сначала, пожалуйста, и дайте мне знать, хорошо? спасибо
@@stillwindops2438 привет, всë делал так же как вы написали, прицел уже пристрелял, всë супер, очень доволен качеством картинки, спасибо за помощь!
@@ВоваМорев-м7ц Здравствуйте, я рад слышать, что все получилось.
Да, этот прицел очень хорош за свою цену. Позже я купил клипон ночного видения GEN 2, немецкий продукт, надел у моего друга высококачественный тактический прицел Steiner (тоже немецкий), на 100 м WANNEY легко побеждает комбинацию GEN 2, даже я даю GEN 2 лазерный ИК-фонарик для освещения. . Цифровое ночное видение, такое как WANNEY (на мой взгляд, лучшее за эти деньги), имеет гораздо более высокую четкость и изначально было сделано для адаптера ИК-подсветки. Вы найдете больше функций в приложении, я надеюсь, вам понравится.
Ваше здоровье.
Hi mate
Bought one of these so watched your video on sighting in and you say 50yards/meters. This is OK for centerfires and powder burners ect ect but am planning to put it on a UK 12ftlbs air rifle for ratting at between 15 and 30 yards how do I calibrate it for these distances and power? Cheers phil
Hi Phil,
I never mount it on air rifle before but I know it can take its recoil. The zeroing method in principle I believe should be similar. Stay with me since this is going to be a long reply.
Before we start, beware you may need to do a scope firmware update to use the zeroing method I mentioned below. Some of the scopes were still using the very old firmware where the controls were assigned differently. At this time V6.25 is the latest firmware for the scope and the V6.26 is coming up very shortly according to my information. Regarding how to update it follow the instruction on the website you should be fine.
www.wanney.com/Download
For the zeroing paper, Wanney has taken my zeroing sheet design and changed it a bit.
hk2dabb7-pic33.websiteonline.cn/upload/20211117-E5X50MZERODESIGN-V41-A4.pdf
They call the windage “X” (which is the x axis) and elevation “Y” (which is the y axis), essentially same to the coordinate grid in math. Note its two page and each suits different environment so print both.
What you need to know is X+ is to move the impact point to left, X- is right, Y+ is to move the impact point up, Y- is down.
So, if my impact point on the zeroing paper is (x+21, y-17) which is on the top right corner, I need to use the right arrow key to do +21 and up arrow key to do -17 in order to zero.
Now, this zeroing paper is designed for zeroing at 50m, but to use it for 30m I believe all you need to do is doubling or 1.5x the input. So, say your impact point on the zeroing paper is still (x+21, y-17), you should use the right arrow key to do +32 ( 21x1.5=31.5) and up arrow key to do -26 ( 17x1.5=25.5) in order to zero. You may have to fine tune a bit but essentially that’s the gesture.
Oh, regarding execute the "Zeroing" command through the scope, you still just press and hold the "Shift" button for 10 seconds (Older firmware was 8 seconds, just hold it until you see something popped down the bottom of your screen, if nothing happens, you need to check your firmware, maybe very old) then you should see the "Now zeroing" pops up and you are able to adjust your elevation and windage compensations.
I haven't used that for a while since I was doing it that in the APP because that's more user friendly for me, especially the fact you can see what your current elevation and windage number is (It actually display as and you can do + or - with the APP faster. And you can save that data in the file.
If you interested to use the APP, then there is another way but that requires you to input all the correct ballistic related data of your rifle and ammo in to the APP. Say if you done that or did a valid best estimate input (by valid I mean you can test it out somehow). You can simply change the zeroing figure from 50m to any reasonable distance you desire and the reticle center will adjust to the new zeroing distance just like that. I can give your more detail should you want to test it out.
Well, I hope this infor helps you out, let me know how you go, cheers!
Thank you for this post. I bought one of these and you post was instrumental in getting mine up and running correctly. Happy with the scope now.@@stillwindops2438
iam deciding to purchase this one you revived or the PQ1W not sure you know that one. but still i have to ask you if you would buy wanney again or you would go for something different ?
Hi yovi,
Very good question! Let me share with you my view.
For me, my budget was $1000 Aussie dollar (about 700 USD)，my wife will kill me if I want to spend more than that. If money isn't an issue then I want to buy Gen 2+ or Gen 3 analog NV scope, I think they will be so much easier to use and perform much better.
But if 700 USD is your budget, night hunting is what you intend to do, and you don't need military grade impact and water proof, willing to operate the complex controls like operating a smart phone, then go with Digital NV with a built in 940um IR flash light (940um light animal and human eye bearly able to see compare to a red glowing 850um which is very visible)
Performance wise (see and recognize an animal 100-200 away) I think they better than analog Nv Gen1.5/Gen Core, the compromise is battery power, rigidness, and ease of use. I don't think any of them is easy to use and you just have to learn how to operate them.
The videos I made for this wanney scope is actually manual not review, because the manual handbook sucks. I already bought the scope and want to utilize it properly and I thought they are people out there like me, that's why I did these videos.
Since I haven't seen the PQ1W scope you mentioned I can't comment on that. With my limited experience with these Digital NV scopes I think they share a lot of similarities, just pick the one you like, if there are videos teach you how to zero the scope that's a big plus, that's always the hardest part.
And will I buy wanney again? Yes is the answer. Because I have spent enough time and have learned how to use it properly know. Some features I want but it doesn't have, and its complicate to operate sometimes. But for the money I can't complain (you get what you paid for), and it works for my need. This E53 is their 3rd generation product, and it did improve a long way. (I have seen their 1st gen product on the gun show years ago and that was bad, a torture to play with) so they are learning too, I do look forward to see their next scope.
Hope this helps, cheers.
Hola, que tal funciona este visor??....este modelo es de AliExpress ? Gracias
Hola amigo, no estoy seguro de lo que estás preguntando. Supongo que preguntas cómo grabo el video. Si esa es la pregunta, el visor del rifle en sí tiene una función de grabación de video. En gran medida, es como un teléfono inteligente con función de visor de rifle. Eche un vistazo a este video que hice para ayudarlo a comprender mejor. ruclips.net/video/y51hjycxqFA/видео.html
Conseguí el mío de Amazon.
Gracias.
Hi Sr. Talk more about the ballistics calculator parameters please!I I looked for more info on the wanney site, but it's too poor of content or no info to use! there are no instructions on how to set or use the scope! the only reference is your channel's video. Brazil whatching you! thank you.
Hi mate, I am currently working on the App video, bit complicated but fun to explore and takes a while to do. Hopefully will upload it next week. As for the ballistic caculation it's going to be a separate video and I need more time to do it right. But I will try to give you some brief content in the next couple of days. Cheers.
Hi Thomate, Greetings from Australia, I haven't forgot about you. Just been busy with the young kid and learning the ballistic caculator, also there is new App update from Wanney that suppose to allow you save multiple zeros information. My understanding is you can save zero for different ammo in same caliber and even for different calibers. (Need to verify).
I understand the basics of the ballistic now and will write you some key points around this weekend. I plan to make a video about it maybe end of December or next year January because I need someone to verify in practice (I don't have the time nor the skill) A friend has already agree to test it on a .308w in December for me. So let's see how that go. Cheers!
Hi Thomate,
Here is the ballistic calculation information you have been waiting for.
1st thing is update your APP to the latest version V1.22 Android, iOS not sure may be later. I haven’t test it myself which a friend will help me in December, so everything I told you is what I gathered from emails with Wanney. I think I got them right but please don’t blame me if incorrect.
Trajectory Parameter：
Suitable for shooting in stationed position, all parameter has effects on trajectory.
Target Range, assume you zeroed at 50m as recommended, this change the middle aim point to the distance of your choice. Set it to the distance you want to shoot eg.100m, 200m
Target Angle, input what’s on the right corner of the screen, aim upslope is “+” number, downslope is “-”
Wind Velocity is to set muzzle wind (wind near muzzle) in meter per second m/s or mile per hour miles/hours where wind from left to right (3 o’clock to 9 o’clock) is “+” number, wind from right to left (9 o’clock to 3 o’clock) is “-” number.
Relative Humidity affects air drag on the projectile, if not sure set at 85% (it’s considered a relatively average number), but its recommend to know the correct number, a hygrometer is handy to have.
Default resets all setting should you want to start over.
Trajectory Parameters Setup, Target range parameter is the only setting once changed is saved instantly, the other parameters does not save until you press this Trajectory Parameters Setup button.
Bullet Information：
Every correct information makes the calculation more accurate, some information not so accurate does not have huge impact, and however some information if totally wrong will cause significate difference.
Better get it right strong effect on calculation.
Ballistic Coefficient, this data you should be able to find out from the cartridge manufacture’s website such as Winchester or Federal. Note cartridge such as most of standard velocity .22LR where the ballistic coefficient is lower than 0.2, this parameter is unable to compensate since 0.2 is lowest it can go, but you wouldn’t shoot .22LR too far anyways I suppose.
Ballistic Model, again google it, but mostly if its round head like .22LR or 9mm parabellum choose G1, if its convex tip like .223REM or .308Win choose G7.
Bullet Caliber, this I don’t think anyone have trouble with.
Muzzle Velocity, this you will need get a ballistic chronograph to find out and record it yourself. I don’t have one so I will get a friend to help later. One theory I am trying to work on is to take an average number online, say the velocity of a .308W federal metal gold which is tested with 24” barrel and reduce a bit on that (I use 168gr with 20” barrel so my velocity is definitely going to be lower).
So far from what I have been told. If the correct velocity 650 m/s but you input 620 m/s in the calculation, your bullet impact point will be higher than what it should be. So maybe you can try to educated guess your correct muzzle velocity. I will try to verify that later, it’s still just a theory at the moment.
Bullet Weight, this I don’t think anyone have trouble with.
Default, resets all setting should you want to start over.
Load, load a Bullet Information file where you previous saved.
Save, save this Bullet Information file with a specific name, like .22LR Win Power point or .308W Federal M Gold. (switching between guns is what I am thinking ^^)
Bullet Infor Setup, nothing is saved until you press this Bullet Infor Setup button. Password is 876543210
Zeroing
Yes you can input zeroing set up here instead of on the scope.
Best check my zeroing videos first.
Whats worth mention is CursorX (which is elevation has 180 PIXELs. How much when convert to MOA or MIL, not sure, let me check and get back to you later.) CurosrY (which is windage has 360 PIXELs, yes it’s funny it has way more adjustment units than elevation, but it’s because of the shape of the screen ^^). X + is left, X - is right, Y+ is up Y - is down.
And you can save zero setting now (the important update in this APP update) just like bullet information which is cool.
I hope this helps, cheers!
@@stillwindops2438 THANK'S FOR HELP US.
Nao consigo regular a luneta. Nao movimenta o cursor ate aonde o projetil atingiu o obstáculo.
Молодцом, хороший обзор.
Thank you!
falo a regulagem e fica perfeito porem quando desligo e ligo novamente volta na regulagem zero , não fica salvo a regulagem anterior ,como faço para regular e salvar a regulagem e assim quando religar permanecer regulada
E aí cara,
Se o ajuste for feito através do teclado, ele será salvo automaticamente depois de configurado. Foi-me dito que havia um bug com o firmware do escopo 6.27 que corresponde ao que você descreveu. Este bug foi corrigido na atualização de firmware 6.28. Então vamos atualizar o firmware do seu osciloscópio para 6.28 e seu problema deve ser resolvido, aplausos.
@@stillwindops2438 agradeço sua atenção e retorno ,deu tudo certo atualizei e a luneta ficou perfeita e agora após a zeragem desliguei e liguei novamente e se manteve regulada ,,,,muito obrigado
@@TheComandomorcego Excelente!
When you focus on the target will it give you the range ?
No mate, the scope doesn't tell you any distance.
Buenos día como ago para comprar una mira de esa y cuento vista gracias
Hola, lamento responderte tarde, no vi tu mensaje antes.
Bueno, todos estos alcances digitales tienen sus características publicitarias especiales, he escuchado y visto algunos otros y puedo decirles que este que obtuve es bastante bueno por el precio. 3 razones: 1. Por el dinero, sus características clave son sólidas. 2. Su software se desarrolló internamente, su actualización desbloqueó algunas funciones útiles, como una nueva retícula y zooms. 3. Hace un tiempo que se confía en él (2-3 años) y es bastante maduro, la mayoría de los errores se corrigieron ahora, lo que en realidad es importante para que funcione de manera confiable en el campo. Pero, de nuevo, lo más importante depende de tu corazón, en cuanto a lo que es más importante para ti.
Espero que esto ayude.
Saludos
Robbie
Hi I have bought one of the E50 II scopes and was trying to find the link to the target sheet but could not find it can you please send the link thanks
xvisionoptics.com/wp-content/uploads/2021/03/20201217-XANS550-50-Yards-ZERO-DESIGN-V40-25X31Inch.pdf
Hi mate, sorry I wasn't able to reply at the time. Had my first daughter and wasn't able to attend anything else for a while. I did pass on the excel spreadsheet to the owner of Wanney and I believe they upgrade that to a A3 sized spreadsheet which now came with the product. If you still want the original A4 sized sheet I can try to email you. Cheers.
вы смогли найти лист мишеней ? Если да скиньте ссылку
na discrição no manual diz que tem ranger fider mas nao encontrei esse recurso
Olá,
Desculpe responder tão tarde, o trabalho tem sido uma loucura.
Não, este escopo não tem telêmetro a laser. Ele tem uma mira que pode ajudar na estimativa de alcance, muito parecido com um sistema de alcance MILDOT refinado ou detalhado, mas infelizmente não é um telêmetro a laser (eu gostaria que tivesse, mas por esse preço).
Espero que isto ajude.
is possible to zeroing at 25m? how can i do that?
Hi Andre,
Stay with me since this is going to be a long reply.
Before we start, beware you may need to do a scope firmware update to use the zeroing method I mentioned below. Some of the scopes were still using the very old firmware where the controls were assigned differently. We are now at version 6.27 which is a very good upgrade, a few new features I found it very interesting.
Regarding how to update it follow the instruction on the website you should be fine.
www.wanney.com/Download
For the zeroing paper, Wanney has taken my zeroing sheet design and changed it a bit.
hk2dabb7-pic33.websiteonline.cn/upload/20211117-E5X50MZERODESIGN-V41-A4.pdf
They call the windage “X” (which is the x axis) and elevation “Y” (which is the y axis), essentially same to the coordinate grid in math. Note its two page and each suits different environment so print both.
What you need to know is X+ is to move the impact point to left, X- is right, Y+ is to move the impact point up, Y- is down.
So, For example, if my impact point on the zeroing paper is (x+21, y-17) which is on the top right corner, I need to use the right arrow key to do +21 and up arrow key to do -17 in order to zero.
Now, this zeroing paper is designed for zeroing at 50m, but to use it for 25m I believe all you need to do is doubling the input. So, say your impact point on the zeroing paper is still (x+21, y-17), you should use the right arrow key to do +42 ( 21x2=42) and up arrow key to do -34 ( 17x2=34) in order to zero. You may have to fine tune a bit but essentially that’s the gesture.
Oh, regarding execute the "Zeroing" command through the scope, you still just press and hold the "Shift" button for 10 seconds (Older firmware was 8 seconds, just hold it until you see something popped down the bottom of your screen, if nothing happens, you need to check your firmware, maybe very old) then you should see the "Now zeroing" pops up and you are able to adjust your elevation and windage compensations.
I haven't used that for a while since I was doing it that in the APP because that's more user friendly for me, especially the fact you can see what your current elevation and windage number is (It actually display as and you can do + or - with the APP faster. And you can save that data in the file.
If you interested to use the APP, then there is another way but that requires you to input all the correct ballistic related data of your rifle and ammo in to the APP. Say if you done that or did a valid best estimate input (by valid I mean you can test it out somehow). You can simply change the zeroing figure from 50m to any reasonable distance you desire and the reticle center will adjust to the new zeroing distance just like that. I can give your more detail should you want to test it out.
Well, I hope this infor helps you out, let me know how you go, cheers!
@@stillwindops2438 Is possible to configure the 17hmr on this scope? I can't find it on the ballistic table
@@woop3r88 Hi Andre, You are right as the App hasn't got the latest caliber list which includes .17.
The latest scope firmware however has the caliber list start with .15. So if you have updated the firmware of the scope to the latest version. You can press the menu key a few times until you see the Menu display, inside you will see the ballistic setup where you can key in 017 for the caliber. Pretty sure they will update the App later to have the listing updated too.
Hope this helps, cheers!
@@stillwindops2438 cool!!! do u have whatsapp or something like this?
@@woop3r88 I do use what's app but how do I add you?
добрый день а 308 калибор будет держать?
добрый день и с новым годом.
Да, прицел рассчитан на отдачу .308 Winchester.
Искренне,
Робби
Boa noite meu amigo. Comprei esse visão, mais não consigo ligar a noite, ele só enxerga durante o dia. Como faço ver algo noturno.
Hola amigo, necesitas cambiar la configuración de tu sentido. 0 es el modo de color para la luz del día, 1-3 es el modo de noche, para obtener más detalles, vea este video ruclips.net/video/y51hjycxqFA/видео.html a partir de las 04:00, espero que esto ayude. Gracias
Si es posible hacer algo en español
You can not here the video almost no sound
Сколько стоить этот прицел
Переводите пожалуйста😂 по английский бум бум
Еще раз на русском объясните пожалуйста.
Привет, извини, я не говорю по-русски. Надеюсь, этот перевод Google поможет. Я знаю, что есть российские заказчики, которые тщательно тестировали этот продукт (более 12,7 мм, насколько я слышал). Я полагаю, что в вашей стране есть дистрибьюторы, у которых уже есть обновленные знания об этом. По сути, важно то, что высота и ветер всегда обратные, поэтому нажатие стрелки вверх приводит к тому, что точка удара падает. и всего 4 нажатия кнопки перемещают точку удара на 1 см на 50 м. Эта электронная таблица Excel просто пытается избавить вас от лишних мыслей во время калибровки. Надеюсь, это поможет.
@@stillwindops2438 Thank you very much.