Thanks for your comment Michael. The alder that we were clearing in this video is obviously much softer (590 on the Janka hardness scale) than scrub oak and manzanita. The 3-5" cut capacity would be more accurate with those hardwoods.
Hey Cameron, that's probably right. The grass cutting capability may have been affected by the wetness of the grass as well (this was early morning on a winter day in Washington state). Also, this was the operator's first time using the mower and the results would be better as you get to know the attachment. You should check out our video of the F series flail mower from Brush Hound as well, which is more designed specifically for grass and lighter stuff.
Did they show how unprotected the shaft is between the bearings and drum? Try and get some woven wire out when it wraps around. 3.25 hours this last time and I've done it many times.
Flail mowers like this one provide a finer mulch of grasses and light brush, and also give the operator better visibility because the front of the mower is much closer to the cab. Flail mowers also do a better job with field mowing, as rotary deck mowers will often times lay the grass down as they drive over it rather than actually chopping it off. For pure brush cutting, especially heavier material, you should go with a rotary cutter, but for field mowing and up to 3-5" brush this mower will do a great job. Hope that helps! Feel free to call us if you'd like to talk further details. 866-966-2538.
The only reason I am considering a flail instead of my rotary is “even discharge”. I don’t like how mine will wind row the cuttings and smother the grass in my pastures. I am building my soils organic matter with clipping overly mature grass and mob grazing. Soil high in organic matter is about the only defense against drought for us.
The mower uses the standard flail blades because they perform better on grass and light brush, and are easier on the blade carrier, among other reasons. They also handle the recommended cut capacity (3-5") just fine. For larger material a dedicated mulcher attachment will perform much better of course!
It would be helpful to see some closeup views of the cut material, showing how fine the mulch is, and how evenly distributed.
can this unit run in reverse to clear itself? it would be advisable to get some protection for the hoses, see 6:30
It would be a plus to see how this mower performed with scrub oak, manzanita and other brush.
Thanks for your comment Michael. The alder that we were clearing in this video is obviously much softer (590 on the Janka hardness scale) than scrub oak and manzanita. The 3-5" cut capacity would be more accurate with those hardwoods.
Looks like it was leaving some taller uncut scrub. Is that bc it was raised up a little? I’ve read flails cut better lower
Hey Cameron, that's probably right. The grass cutting capability may have been affected by the wetness of the grass as well (this was early morning on a winter day in Washington state). Also, this was the operator's first time using the mower and the results would be better as you get to know the attachment. You should check out our video of the F series flail mower from Brush Hound as well, which is more designed specifically for grass and lighter stuff.
I like that!!!!!!
Can this be used on a standard flow machine
It can run on machines with as low as 16 gpm hydraulic flow.
Did they show how unprotected the shaft is between the bearings and drum? Try and get some woven wire out when it wraps around. 3.25 hours this last time and I've done it many times.
Hi, thanks for the feedback. We will inform BrushHound
Why would I consider a flail mower attachment over a a deck mower? I'm researching a purchase and this video has me thinking. Thank you.
Flail mowers like this one provide a finer mulch of grasses and light brush, and also give the operator better visibility because the front of the mower is much closer to the cab. Flail mowers also do a better job with field mowing, as rotary deck mowers will often times lay the grass down as they drive over it rather than actually chopping it off. For pure brush cutting, especially heavier material, you should go with a rotary cutter, but for field mowing and up to 3-5" brush this mower will do a great job. Hope that helps! Feel free to call us if you'd like to talk further details. 866-966-2538.
tell me something about the skid steer
Hey Richard, we're running the mower on our Kubota SVL95, which has high flow. More in depth specs can be found online! Thank you.
The only reason I am considering a flail instead of my rotary is “even discharge”. I don’t like how mine will wind row the cuttings and smother the grass in my pastures. I am building my soils organic matter with clipping overly mature grass and mob grazing. Soil high in organic matter is about the only defense against drought for us.
How much is it?
$13,000 here's the link! www.skidsteersolutions.com/brushhound-fh-series-skid-steer-flail-mower-rockhound/
@@SkidSteerSolutions thank you
Why didn’t you use heavier hammer blades?
The mower uses the standard flail blades because they perform better on grass and light brush, and are easier on the blade carrier, among other reasons. They also handle the recommended cut capacity (3-5") just fine. For larger material a dedicated mulcher attachment will perform much better of course!
👍👍🚜
Pretty obvious that is a Kubota