Размер видео: 1280 X 720853 X 480640 X 360
Показать панель управления
Автовоспроизведение
Автоповтор
I would run sellotape on the glass prior to removal. It helps the glass come off in one piece.
Nice job and well taken in Uganda
Could you please explain why the phone needs to be taken apart, rather than simply removing and replacing the front screen? Many thanks in advance
because of the cable
You need to put the LCD display in machine afterwards so need to be off the board
@@arturgjoni8881 even if just replacing the glass and not the LCD screen?
What liquid you use to clean glue from screen? Thank you
you can use any type of liquid like petrol ctc thoner etc
@@easyrepairingtips7794peut-on mettre du dissolvant aussi ?
instead of an heat gun can you use an hair dryer?
yes you can use
Good job, I like the way you do it
Artur Gjoni 🥰
Why do youneed to take off the battery and all parts before i change screen ?
I also wondered about this
Good job man
Please help me Behind the ear piece mesh is a piece of thextil material ?
Nice job👍
I don't have a bubble machine. Can I still do it at home?
Yes, buy glue loca
Hello ! Whats type of gassoline is ? (Lighter gasoline ?)
How about wire .04 use in tablet digitizer remove?
Is this temper class?
What's the temperature I should set separator machine at?
70 to 80c
so how much this cost ?
Very much - Belgium
Bonjour, quels sont vaut tarifs ? Le mien est aussi cassé
You talking and explaining would of been helpful
What if we don't have heat guns that are poor
It's not the heat gun you have to worry about, you can use a hair dryer and still get the screen off. Your problem will stand with trying to get the bubbles out from the glass and led without that machine.
@@thefishthatranaway6042 its easy usa loca
Are u from pakistan
Kashish Chitkara yes dear
Bie sab samsung a10 ka charcheng board new malaga
It was all good till dude pulled the fucking bubble machine out 🤣
Do not use gasoline on the heatsive it can cauth fire
I would run sellotape on the glass prior to removal. It helps the glass come off in one piece.
Nice job and well taken in Uganda
Could you please explain why the phone needs to be taken apart, rather than simply removing and replacing the front screen? Many thanks in advance
because of the cable
You need to put the LCD display in machine afterwards so need to be off the board
@@arturgjoni8881 even if just replacing the glass and not the LCD screen?
What liquid you use to clean glue from screen? Thank you
you can use any type of liquid like petrol ctc thoner etc
@@easyrepairingtips7794peut-on mettre du dissolvant aussi ?
instead of an heat gun can you use an hair dryer?
yes you can use
Good job, I like the way you do it
Artur Gjoni 🥰
Why do youneed to take off the battery and all parts before i change screen ?
I also wondered about this
Good job man
Please help me
Behind the ear piece mesh is a piece of thextil material ?
Nice job👍
I don't have a bubble machine. Can I still do it at home?
Yes, buy glue loca
Hello ! Whats type of gassoline is ? (Lighter gasoline ?)
How about wire .04 use in tablet digitizer remove?
Is this temper class?
What's the temperature I should set separator machine at?
70 to 80c
so how much this cost ?
Very much - Belgium
Bonjour, quels sont vaut tarifs ? Le mien est aussi cassé
You talking and explaining would of been helpful
What if we don't have heat guns that are poor
It's not the heat gun you have to worry about, you can use a hair dryer and still get the screen off. Your problem will stand with trying to get the bubbles out from the glass and led without that machine.
@@thefishthatranaway6042 its easy usa loca
Are u from pakistan
Kashish Chitkara yes dear
Bie sab samsung a10 ka charcheng board new malaga
It was all good till dude pulled the fucking bubble machine out 🤣
Do not use gasoline on the heatsive it can cauth fire