QiYi WuWei M 3x3 | Everyone Solves

Reserve yours here: www.thecubicle.com/collection...
Most of us are really enjoying this new 3x3 from QiYi. But there are a range of opinions on this puzzle. Check out the video to see everyone's thoughts on this budget friendly release from QiYi MoFangGe!
------------------------------------------------------------------------------------------------------
Make sure you're following our social media accounts to stay updated on everything Cubicle.
Instagram: / thecubicleofficial
Facebook: / thecubicleofficial
Twitter: / thecubicleusa

[@cubeologist42]

The wuhua and wuji are discontinued and we didn't have any in the office lol

[@ilovedoritosandmountaindew3569]

Dats tuff yo

[@nicotimeyt]

Rip

[@sk_cuber69240]

Ok! Makes sense

[@officialdestruction2465]

Sad boi

[@ilovedoritosandmountaindew3569]

I actually have a white wuhua v1

[@lincolndavis3302]

what a great video iam going to probably buy it now ti explains a lot thx so much

[@SAINTLUCIFER_WG]

By the way, this cube is most similar to the *SenHuan Mars S* 3x3. (If anyone even remembers that cube existed)

[@user-pf5do5ep1p]

SCcuber do you mean it’s trash

[@MatthewLiuCube]

@@user-pf5do5ep1p it's not. The WuWei my main

[@user-pf5do5ep1p]

Matthew Liu the senhuan Mars S 3 by 3 is your main?

[@MatthewLiuCube]

@@user-pf5do5ep1p no the WuWei is...

[@eternalrewind2190]

This cube is the best in it's price range. Super smooth, perfect magnets, kinda strong. The tracks on the pieces keep it stable. Kinda like the gts3. Needs a tensioning system and be 56mm

[@nuttyjoe]

Its 56mm but no system :(

[@nareshkumar12]

How's the magnet strength compared to the WR M?

[@bananacupkakes9344]

Nareshkumar Bharwani stronger magnets in wuwei

[@pranavswaminathan2639]

Who else is still waiting for the valk elite?!

[@cubeologist42]

Literally everyone, not sure what they're doing honestly.

[@sk_cuber69240]

@@cubeologist42 Right

[@tihomirmavricek]

I guess they planned for thunderclap v3 and wuwei to be valk3 elite so it didnt go well

[@sk_cuber69240]

@@tihomirmavricek right

[@AbsoRuud76]

Oh but the Valk Elite was released already. It's called the MGC Elite now. :)

[@juju-kf3dx]

Rowe's solves are just too good to watch

[@mkay2970]

Lol I almost forgot about the wu line because all of the cubes are outdated at this point :p

[@SaneTheBro]

Finally its here

[@lyndseygrimes8882]

This cube is ridiculously good and smooth for 14 bucks. Best budget cube imo. And the magnets are perfect. Usually the mags are to weak in these cheaper cubes

[@jedcubernayaracam800]

Qiyi Wuwue 3x3 The shades are cool And I Think They like it

[@anthonyrobert1376]

fearless cube

[@noeruchangd]

Wow, QiYi makes 3x3s?

[@ACEthetics.]

Valk: am I a joke to you?

[@Jvdzzz]

Is it heavy?

[@kcmmm7693]

heard about the angstrom clock

[@SaneTheBro]

better than thunderclap center cap design

[@datboi0669]

Yeah

[@bensolvescubes977]

Yo what happened to the valk elite

[@ThomasAFN316]

Is this the Valk elite substitute or is it a completely different cube

[@pmcuber2626]

I hope there will be valk elite with some new technologiea

[@thekaeden]

which is better wuwei or sail?

[@user-lx7yd7di1i]

what timer is that

[@moksh_sharma.0729]

👍👍👌

[@afiffaisal9782]

Finally

[@LLEmmmON]

What kind of app/website u use for timing in the video

[@kavitaagrawal2534]

That is cs timer

[@trfcuber6642]

WuXia
WuWei
WuQue
WuShuang
WuHua
WuJi

[@joobin814]

Wu ld you like some sub 7 solves?

[@anthonyrobert1376]

@@joobin814 lol nice joke

[@berrithoughtfull]

@@joobin814 wu ai of course

[@impaledd]

how does damian pause and still get a better time than me

[@Herbert.]

I came here just to watch Chris Tran's aesthetic ZZ solves. Was disappointed.

[@pierrehuang3291]

the U3 LOL

[@GastonGamerz]

Should i get this or the qiyi thunderclap v3 m?

[@s2erp5ent]

I think the wuwei would be a better choice. I have the Thunderclap v3 and the cube doesn't have amazing corner-cutting and isn't as smooth as this.

[@CK113th121]

I have both. thunderclap v3m was my main before getting wuwei and it still is. The feeling is pretty different. Though thunderclap v3m has slightly more catches and deforms more easily ,Wuwei is just too fast, harsh and blocky for me. I’ll try some damping lubricant to slow it down and see if it can be my new main.

[@vijithasanoj5335]

Hey guys which is stable kylin v2m or wuwei m?

[@beepboop9141]

I’d recommend the wuwei a lot more. I have it, and it’s stable and doesn’t deform.

[@dahdushe]

Plz someone answer, what’s better this or the guhong v3 m?

[@metju1]

this

[@speedcubingaccount4121]

guhong

[@SAINTLUCIFER_WG]

Why doesn't Keenan know how to do U2?

[@BlitzEGG]

Why so little likes and views also good pronouncing 👌🏿

[@winobu8026]

Should I get this or mf3rs3m

[@cubeonicscubing2569]

Wilson Noah this

[@fizikgaming8188]

Giveaway when?

[@eternalrewind2190]

Why does qiyi Facebook page and speedcubes shop say this is a 56mm cube yet cubicle says 55? And on your site it says 55.5mm?

[@cubeonicscubing2569]

Eternal rewind2 top 10 questions science can’t answer

[@asmallkitten]

Eternal rewind2 because we measured it with calipers to low 55mm.

[@MarkusAliasCmn]

funny that qiyi's introduction video says 56 mm, you say 55 mm. 🤔

[@anthonyrobert1376]

CCCRRRUUUNNNNCCCHHHYYY

[@mouhktar4587]

Wow. Maddie now averages14. She used to average 18 like 2 months.

[@jonathanayre7369]

I think they are their best solves

[@marclim631]

When you're sub 30 and literally everyone is sub 15 or better

[@kacperolszewski3775]

This or guhong v3 or mf3rs3m

[@SAINTLUCIFER_WG]

Guhong V3M

[@RBMCubing]

SCcuber I agree, guhong v3

[@joobin814]

When I still cant get sub 15 ;-;

[@sk_cuber69240]

Haha Lol!

[@RealNaoh]

PRACTICE!

[@joobin814]

@@RealNaoh I actually got sub 15 some time ago

[@RealNaoh]

Josh Lee Congrats!

[@iyslfj]

Hey guys this js Rowe, I have to say something something something every time. Sorry Rowe

[@deadinside5894]

Is it okay to mirror all CFOP algorithms or does it make you slower?

[@kavitaagrawal2534]

Mirroring olls is not that bad but i think you should do fb mirrors instead of lr mirrors
But mirroring plls is not good

[@eternalrewind2190]

Also I literally just watched qiyis RUclips page and it also says it's 56mm... What gives? Who's wrong? I tend to only use 56mm cubes so it's kinda important to me

[@thecubicleofficial]

Just measured it again and the calipers say 55.14mm, they can call that 56, but I prefer to be more honest.

[@eternalrewind2190]

@@thecubicleofficial thank you for replying.. and thanks for being honest about the size.. don't know what they're smoking calling it 56mm lol... Ive seen this happen with other cubes too. From now on I will go by what the cubicle has it listed as :)

[@savagekingtexas_3990]

Another everyone solves and I'm not the last one to watch this :)

[@wanderlustauto2230]

You must show corner cutting

[@martyb5128]

Wow I’m early

[@anthonyrobert1376]

i also like watching cubing videos

[@pmcuber2626]

Why Phill uses coll everytime, it is not that good

[@asmallkitten]

Because I'm trash. What do you average?

[@cubotrix4152]

asmallkitten well, how fast coll is/can be, depends on multiple things: if you can sub-1 the alg, have multiple ways and angles of recognizing the cases and so on. Finally, it is really good for OH (if you use good algs tho) :)

[@nikitakusuma8440]

Maybe because he doesnt have time to learn ZBLL eventhough he already uses ZZ method that will always give him all edges oriented OLL

[@stridepg3d348]

First and nice vid

[@toasttoast9412]

3rd

[@jandellko]

yoooooo

[@davidlee2519]

Woaj

[@nabranestwistypuzzler7019]

29th

[@watungb]

WUWEI

[@juliorico8170]

First

[@poisoniv4581]

69th

[@user-ew7ob2il8u]

-ok-

[@joobin814]

Noice

[@collinsmith1585]

First

[@toasttoast9412]

4th