CD Player Not Spins CD Error and Replacement Old KSS-213 C
HTML-код
- Опубликовано: 8 сен 2024
- Bu videoda CD oynatıcıda CD tepsi motorunun dönmeme hatasını tespit ettim,aynı zamanda eskimiş olan KSS-213C lazer kafasını değiştirdim.Onarılan arıza odaklama katı arızasıydı.
n this video, I founded the not spining the CD tray motor in the CD player. Same time ı replaced very old KSS-213C Laser Head. This was a focus amp error
Thanks, Stefan, Jersey, Channel islands
Простите! Вы на каком языке объясняли? Я только понял, что лаз.головку поменяли, а в подробностях не расслышал.
Arjantin'den merhaba, bir tercüman kullanıyorum, size soruyorum, motor dönmüyorsa, lazer mi? çünkü motorları harici olarak test ettim ve mükemmel çalışıyorlar.
Motor ve lazer grubunu komple değiştiriniz
When you buy a new Optical reader it comes with an anti static soldered tag on Dude to protect it..... i noticed you did not
de solder it or even point this out !!!!!!!!!!!! It will never work unless you do de solder it....
Absolutely correct. I did that very thing 5 years ago, thought I had bought a dud laser, but eventually discovered what you said, removed the solder, and hey presto, new CD Player. This video is utterly useless without pointing this out.
Also relevant for new DVD lasers
It may have been a reader that was pulled from another player. Otherwise, you're 100% correct, it won't work without removing the solder blob...
పి సి డి ప్లేయర్ కి సేమ్ నెంబర్ లెన్స్ మార్చాలా వేరే నెంబర్ లెన్స్ అయినా వెయ్యొచ్చా
A unidade óptica do meu cd player não retorna, só avança o que pode ser?
En donde puedo vende ese tipo de lente óptico (ss213b
En AliExpress Puede Vender Laser Mas Barato
You've ripped apart the lence cover my friend
It's done
Aynı cd okuyucuda farklı bir göz ya da mekanizma koyduğunuzda sistem bunu çalıştırabiliyor mu acaba ?
Aracımın hem cd çaları hem kaset çaları var problem cd yi alıyor döndürüyor fakat ses gelmiyor play gösteriyor . Ne yapma gerekli acaba
Lazer kafa(Göz) arızalıdır,değişmesi gereklidir,cihazın kendini PLAY konumunda göstermesinin sebebi lazer kafanın içerisindeki diyotun CD üzerindeki izleri tam okuyamayacak kadar yetersiz voltaj almasıdır.
Sorry this video is incomplete, cause if u dont Open and clean both Motors, the vcd dont Work right. Them must work with 11.9 ohms. The motors, must be clean too. And clean the mechanism is very inportant too.
Bende de sony mini muzik seti var. No disc hatasi veriyor. Yine bu kss 213 c mi degismelidir
Do you mean is not spins because the old kss
Burak bey kss213c nerden bulabilirim acaba?
Elimde var, burakerengil695@gmail.com mail adresinden ulaşabilirsiniz
El trabajo que hace debería ser con más cuidado , puede dañar otras partes por el brusco manejo de las piezas , engranes, tornillos ,lector ,suspensión . .no lo recomendaría .