Happer Premium Sumo Cloth Drying Rack Assembly Guide
HTML-код
- Опубликовано: 7 сен 2024
- Link- www.amazon.in/...
Welcome to the assembly video of your newly purchased Happer Sumo drying Rack.
Feel free to pause the video when you feel like.
Let’s begin with the unboxing.
In the box, you will find the following:
- A set of Plastic Topnet
- A set of assembled cross for each side.
- 8 big and 2 small bolts with nylock nuts
- 4 RODS D
- 4 RODS A
- 2 RODS C
- 2 RODS B
- 1 ROD E
Let’s begin the assembly.
1. Take the two plastic part of the top net and insert Rods A on both sides.
2. Place the assembled cross against each other (make sure that the E connectors are at the bottom on both the assemble cross),
3. Take the top net and insert rod B through the top net into the top side labelled as B on the cross. Screw it on both sides with nuts and bolts.
4. Insert the other Rod B on the bottom and fix it with the nuts and bolts.
5. Next, take the 4 D label rods and insert them in the connectors labelled as D on the cross. Insert the rods on the other cross as well.
6. Now, take Rod E and insert it in connector E. Fix it on both sides with the 2 small nuts and bolts.
7. Finally come down for rods C and insert them in connectors C of the both the cross and screw with the big nuts and bolts.
Congrats! Your Sumo drying rack is ready to be used.
Thanks for the video..its really helpful in assembling the drying rack😊👍
Need sumo cloth dryer elbows can i order it??
👌
Where to put the 2 small screws?
For E rod.
For E rod.
D rod is not getting fixed ..seems small
D rod seems to be small