I saw a lot of bad comments about him saying his stringing is not good and all this. I have already given him my rackets strung by him twice. And it was very good that's why he is a Yonex Master Stringer. You guys don't have to complain bad comments about his stringing it's just because you all don't know how to use his stringing style....
It's funny to see so many people comment on the tiny things that contribute little to the actual playability of the strings. Fraying the string's outer layer at a non contact point does not affect the strings performance whatsoever. I tested this myself. Unless you can prove something affects the string's playability, shut up. I used to single pull everyone's racket i've ever strung 3 years ago. I then decided to do some research and ask people their opinion on a few of the same rackets all with different stringing styles. I let them try 6, 1. Single pulled even tension, 2. single pulled progressive tension, and 3. single pulled 2 lb difference, 4. double pulled even tension, 5. double pulled progressive tension, and 6. double pulled 2 lb difference. Here is the ranking from best to worst: 5, 4, 1, 2, 3, 6 I surveyed exactly 37 people and the ranking is based on popularity. Edit: Double pulled the mains only So people, don't bash someone's style or process if you can't prove anything.
imho, i will not really wanna use him. my reason is, the speed and force that he used might already cause friction and slightly damage the outer layer of the string even before i play it. obviously i do not want to change string every 2 weeks or so. i don't mind to wait longer.
There are many different ways of stringing. So, nothing is wrong of what he is doing. European style (start from the middle) and pull one by one, and from side to side. The Asian style (pre-waave), then pull.
Would hate to get my racket strung by this guy. There must be so much tension inconsistency by clamping the strings before it can fully pre-stretch and not locking the swivel base when tensioning. Flash over quality I guess :/
Dan Sai you are so right. Other people who comment here have no clue. I don't know if he is a "yonex master stronger" but certainly he has too many flaws. He is using a starting know to tie off the mains and crosses. This knot will not remove slack in the string. His stringing will not give a consistent string bed tension. As per yonex this not even the right method to string a racquet.
Watch carefully on his stringing style for whatever the players were...the puller only pulled up the string, bi sound havent come out yet he unlock the clamp ady
+Gavin S Because he is experienced he will be able to tell if the tension is about right, he is doing if often so that the string has time to stretch a bit.
At 0:33 he forgot to lock the base... Bad job. The two first tension together... Result half tension. He is fast but bad job. He prefer to take the time to play guitar with the string instead of doing the right thing.
This guy is literally sponsored by Yonex. He is Master Halim. He knows how to fucking string a badminton racquet. He is stringing as quickly as possible here. Speed over accuracy is the aim of the game for this stringing technique. It is still somewhat accurate. Not perfect, but useable. Stop acting like you're Mr Yoneyama. This guy is a better stringer than you will ever be.
really? this is you yonex called Master? Did this guy know any content of USRSA/CRSA/URSA Certified Stringer test. Preweaved main and cross? using string hookers? I might have to reconsider what's the definition of Master though.
bro its not abt put up or shut up here... Theres a "code of conduct" that authorised stringers adhere to. Given his expertise, woudnt it be better to show the proper way of stringing? Doing this does this reflect a pride of a "professional" stringer? Doing "industrial weaving and time attack" isnt something most average joes in retail shop also can do? Most stringer who want to do the right thing often get shun at because they're not players, its no different as long as its done quick. I honestly believe the stringer have gone through the pain of taking test to qualify as a "yonex stringer". Why throw it away? Hope you understand where im coming from. Cheers
This aint master stringer. First of all theres a lot of friction burn going on the stringing process. 2nd the hook is damaging the cosmetic of the frame. 3rd the double pull tension at the edge main had already been tension loss. 4th the tie off last cross string at the 10 o'clock postion shoudnt be there. 5th the way he clamp the string is use by force and that could result to string snap. 6th after stringing not even a single alignment has been done. Very very poor stringing service. Its not how fast you can string but its how the quality that you can preserve and offer. #USRSA certified stringer here.
Too many flaws. Not a professional category stringer. Wrong place to tie off the crosses. Wrong type of knot to finish the tie off. Not using the yonex method to string racquets. He is not a master stringer
chaitanya kumar Samardhi I actually hate it when strangers tied off their crosses there. Too lazy to put in correct hole because it is harder so just ignorant
We know you are right. He is doing such lousy job. I didn't watch the whole thing. Waste of time. Came here to try learn something to string faster. But such crappy job. He should be ashame of himself. He has no pride...
I saw a lot of bad comments about him saying his stringing is not good and all this. I have already given him my rackets strung by him twice. And it was very good that's why he is a Yonex Master Stringer. You guys don't have to complain bad comments about his stringing it's just because you all don't know how to use his stringing style....
Lee Chong Wei Are you the real Lee Chong Wei? say the truth!
Ashfaque Hossain ...most probably not cuz this guy won't get to string lee chong wei's rackets
@@kringgozarto9231 i was just cracking a joke since this👆 guy's name is LCW
@@sameerchakma you can check the one who strung lcw racquet on Instagram. INSTAGRAM LCW STRINGSTER=dragonlong75
hey you,dont cheat here
It's funny to see so many people comment on the tiny things that contribute little to the actual playability of the strings. Fraying the string's outer layer at a non contact point does not affect the strings performance whatsoever. I tested this myself.
Unless you can prove something affects the string's playability, shut up.
I used to single pull everyone's racket i've ever strung 3 years ago. I then decided to do some research and ask people their opinion on a few of the same rackets all with different stringing styles. I let them try 6, 1. Single pulled even tension, 2. single pulled progressive tension, and 3. single pulled 2 lb difference, 4. double pulled even tension, 5. double pulled progressive tension, and 6. double pulled 2 lb difference. Here is the ranking from best to worst: 5, 4, 1, 2, 3, 6
I surveyed exactly 37 people and the ranking is based on popularity.
Edit: Double pulled the mains only
So people, don't bash someone's style or process if you can't prove anything.
Pulled the first two mains but doesn't repull, GG tension.
imho, i will not really wanna use him. my reason is, the speed and force that he used might already cause friction and slightly damage the outer layer of the string even before i play it. obviously i do not want to change string every 2 weeks or so. i don't mind to wait longer.
This is just for recording purpose. And no, he dont usually string like this. FYI,that is my racket, and the string stays till his normal age..
Is that voltric 80 e tune
Prestring almost every horizontal string ? In the tournament, he is not allowed to do this, but in the store, speed means money.
Really? There's a rule for this? There's. A few error he did but he is crazy fast and the job should be ok for most people
nothing wrong about how he string the racket...prestring the string acceptable as long he started pull the string from the middle
Master halim KINDLY SEND starting knot, finishing knot video to learn
badminton string manual ke hai kya
There are many different ways of stringing. So, nothing is wrong of what he is doing. European style (start from the middle) and pull one by one, and from side to side. The Asian style (pre-waave), then pull.
not every asian did like that okay?im starting from the middle, and only pre-wave the main strings
Mantap skill nya,, Min minta cara'a nih biar senar'a gak mlintir klo di tarik gimana ya..??
Would hate to get my racket strung by this guy. There must be so much tension inconsistency by clamping the strings before it can fully pre-stretch and not locking the swivel base when tensioning. Flash over quality I guess :/
he is the yonex master stringer and you are?
Dan Sai would? Thts future tense
Dan Sai you are so right. Other people who comment here have no clue. I don't know if he is a "yonex master stronger" but certainly he has too many flaws.
He is using a starting know to tie off the mains and crosses. This knot will not remove slack in the string. His stringing will not give a consistent string bed tension.
As per yonex this not even the right method to string a racquet.
chaitanya kumar Samardhi show me ur stringing video as a prove you know abt stringing. Thats a challenge for u bro
he strings for pro players? what about you guys? Please show me your rl qualifications before you want to start becoming a noob keyboard warrior... :)
Bhaiya tum tum kidhar se ho baith kar price Kitna
Hi there can you please teach me this method?
Actually, a lot of international player sent their racket to be strung by this person,recently kento momota, there is video about it
Watch carefully on his stringing style for whatever the players were...the puller only pulled up the string, bi sound havent come out yet he unlock the clamp ady
@@ax00001. ruclips.net/video/hsCa4G7T4DA/видео.html
@@ax00001. ruclips.net/video/O6dqZ15Ibfw/видео.html
@@ax00001. ruclips.net/video/ffz3i9Olwh4/видео.html
@@ax00001. ruclips.net/video/Z13SBzVWHh8/видео.html
jeepers he's like a robot
Sejam Berapa?
What's the purpose behind plucking the strings?
+Gavin S Because he is experienced he will be able to tell if the tension is about right, he is doing if often so that the string has time to stretch a bit.
My racket is strung by him in the Yosin sports house seremban
Is it good?
@@sandichan1629 dont even try it out
Where are your shop
alamatnya dimana om
what a price it metion
Yeah machine kitne rupees Ki Hai
itu ukuran senarnya berapa gan ?
no wonder scratches on my racket head they use that metal hook
BG66 ultimax or BG66 Force ?
At 0:33 he forgot to lock the base... Bad job. The two first tension together... Result half tension. He is fast but bad job. He prefer to take the time to play guitar with the string instead of doing the right thing.
don't talk trash here, his method is proven by customers satisfaction, show me your prove
@@jamilyusof1517 shame on yourself. You better send this video to yonex stringing team,let them prove that his method is a trash
@@ax00001. shame on you dude, doesn't follow procedure doesn't mean it is not good, and you don't even know him or try his service
This guy is literally sponsored by Yonex. He is Master Halim. He knows how to fucking string a badminton racquet. He is stringing as quickly as possible here. Speed over accuracy is the aim of the game for this stringing technique. It is still somewhat accurate. Not perfect, but useable.
Stop acting like you're Mr Yoneyama. This guy is a better stringer than you will ever be.
lol this is ex -yonex team stringer..from 2002-2015 ..he lot experience in stringing pro player racket
memang pandi terbaik
Mesine yo wapik tenan to yo
alamatnya di mana ini min ??
wow... soo fast.
Banyak skill brother ni . Mantap bos 👍🏻
what is the tension?
Nice
so fast!👍👍
রেকেট বাধানে।মেশিনের। দাম। কত
Tarikan brp bg
Laju pon. tpi be alert bole putus bai
May I know where is this??
hock eng, bandar baru bangi, selangor
Klo model nyenar kaya gitu..senar di potong jadi dua banyak mubazirnya...
really? this is you yonex called Master? Did this guy know any content of USRSA/CRSA/URSA Certified Stringer test. Preweaved
main and cross? using string hookers? I might have to reconsider what's the definition of Master though.
柯翎肇 please make a video of you doing better than he did and ill approve
bro its not abt put up or shut up here...
Theres a "code of conduct" that authorised stringers adhere to. Given his expertise, woudnt it be better to show the proper way of stringing? Doing this does this reflect a pride of a "professional" stringer? Doing "industrial weaving and time attack" isnt something most average joes in retail shop also can do?
Most stringer who want to do the right thing often get shun at because they're not players, its no different as long as its done quick. I honestly believe the stringer have gone through the pain of taking test to qualify as a "yonex stringer". Why throw it away?
Hope you understand where im coming from. Cheers
柯翎肇 haha bro you forgot the all time converted title haribito authorize stringer
This aint master stringer. First of all theres a lot of friction burn going on the stringing process. 2nd the hook is damaging the cosmetic of the frame. 3rd the double pull tension at the edge main had already been tension loss. 4th the tie off last cross string at the 10 o'clock postion shoudnt be there. 5th the way he clamp the string is use by force and that could result to string snap. 6th after stringing not even a single alignment has been done. Very very poor stringing service. Its not how fast you can string but its how the quality that you can preserve and offer. #USRSA certified stringer here.
lol this is ex-Yonex team stringer ..from 2002-2015 ..he more experience stringing pro player racket especially Malaysia team
good
You guys should watch alan kakinami video if you want to learn something.
Abang halim hock eng 👍🏽
quality gone
wah keren banget teliti lagi
I liked ni bang gayanya
His style is too musical. 😆
manthan
tolong lah bagi tahu aku
dekat seksyen 15 bangi, kedai hock eng
beaucoup de gaspillage.
badminton Kinjal Lakdi Ka Chilka lake
dakat mana
high speed，low quality.
oh vt80
mas-mase mirip jokowii :v
Sebelah kedai Hock Eng ni.
Idola.mr. halim
Nyoba praktek dgn alat sederhana
ruclips.net/video/1oxSZerQ4jU/видео.html
Harpa :v
Too many flaws. Not a professional category stringer.
Wrong place to tie off the crosses. Wrong type of knot to finish the tie off. Not using the yonex method to string racquets. He is not a master stringer
chaitanya kumar Samardhi I actually hate it when strangers tied off their crosses there. Too lazy to put in correct hole because it is harder so just ignorant
nono
Kaya jokowi
That sucks
Very slow
Such a crappy bit of work. Double pulling the mains, causing so much friction, poor knot technique losing so much tension on the final mains.
We know you are right. He is doing such lousy job. I didn't watch the whole thing. Waste of time. Came here to try learn something to string faster. But such crappy job. He should be ashame of himself. He has no pride...
Which racket was that