RED Alert !!!🚨Make Sure YOU Setup These Buttons FIRST on a Danfoss ERC112 Controller.Headache saved

Поделиться
HTML-код
  • Опубликовано: 5 дек 2024

Комментарии • 14

  • @Mike-ef5lj
    @Mike-ef5lj 2 года назад +1

    What is the password to adjust parameters? Thank you! Happy Thanksgiving!

    • @OcRefrig
      @OcRefrig  2 года назад

      the code is a 3 digit number between 001 to 999. Try 001
      For Level 1 access. Try 017 for Level 2 Access. Try 990 for Level 3 / All access. if None of those codes work it is a Hit & miss deal trying to Hack the passcode. it takes me about an hour or two to hack one of those danfoss temperature controls. i usually remove the controller and bring it back home , crack a beer and start punching in different codes. ill install a used temperature control to get them by till i hack the code. or u can allways just buy a new control and install it. them come new with 000 as the New code. when u push in a New code hit the enter button which is the Lower left button to enter code. 3 incorrect attempts and the controller will lock u out for 5 minutes. then u have to power down the controller / unplug the refrigerator from the wall to bypass the lock out or wait 5 minutes. i use a Power strip at home with a switch on it & a 115 volt pigtail when cracking codes at home.i put push on connectors on the end of the pigtail cord to plug it into the Danfoss controller. Good Luck ! Your Gonna need it.

    • @OcRefrig
      @OcRefrig  2 года назад

      ruclips.net/video/R35ZAiu7hvI/видео.html

  • @Mike-ef5lj
    @Mike-ef5lj 2 года назад +1

    I'm displaying LoC. New equipment to me. Is there a way to reset the password? Thank you

    • @OcRefrig
      @OcRefrig  2 года назад +1

      the code is a 3 digit number between 001 to 999. Try 001
      For Level 1 access. Try 017 for Level 2 Access. Try 990 for Level 3 / All access. if None of those codes work it is a Hit & miss deal trying to Hack the passcode. it takes me about an hour or two to hack one of those danfoss temperature controls. i usually remove the controller and bring it back home , crack a beer and start punching in different codes. ill install a used temperature control to get them by till i hack the code. or u can allways just buy a new control and install it. them come new with 000 as the New code. when u push in a New code hit the enter button which is the Lower left button to enter code. 3 incorrect attempts and the controller will lock u out for 5 minutes. then u have to power down the controller / unplug the refrigerator from the wall to bypass the lock out or wait 5 minutes. i use a Power strip at home with a switch on it & a 115 volt pigtail when cracking codes at home.i put push on connectors on the end of the pigtail cord to plug it into the Danfoss controller. Good Luck ! Your Gonna need it.

    • @OcRefrig
      @OcRefrig  2 года назад

      ruclips.net/video/R35ZAiu7hvI/видео.html

  • @roberthernandez4047
    @roberthernandez4047 Год назад

    How do i set up my defrost for 1 time weekly ?

  • @harrydickson4575
    @harrydickson4575 2 года назад +1

    👍👍👍👍

    • @OcRefrig
      @OcRefrig  2 года назад

      👍👍 🏝 🏄‍♂️ 🏝

  • @luc-alaindehaes3512
    @luc-alaindehaes3512 2 года назад

    your instructions could be a bit better organised BTW Danfoss controller is CRAB !!!!

    • @OcRefrig
      @OcRefrig  2 года назад

      I’m not a fan of danfoss either. Wayyyyy over complicated. Quality is meh. Thanks for Watching.

  • @realestateservicessaleshea99
    @realestateservicessaleshea99 2 года назад +1

    Thanks for the tutorial.
    🥃🥃🍺🍺🍺🎯🏌🏻‍♀️
    Stay safe.
    Retired (werk'n)keyboard super tech. Wear your safety glasses!

    • @OcRefrig
      @OcRefrig  2 года назад

      Your Welcome ! 🛻 🏝 🤿 🌊 🛶 🏝

  • @Chanderdeep_singh_2526
    @Chanderdeep_singh_2526 Год назад

    Please send t