The Hydros controller is a super cheap option in comparison to the rest of the market. I've done little reading up on it though as currently it's not available to the UK market. I think both the GHL and Hydros would be great options
I haven't yet, I want to leave it a few weeks for the sensor to settle. I have tested against a few off the shelf test kits and the results fall in line. Ideally I want to send off an ICP test to compare to
Because I have the Profilux I opted for the slave dosers. You can buy the dosers and KH/ION Director sets as standalone. The standalone units do not require a Profilux
Hey there. Nice video. Just what I have been looking for. Could you do me a favor and measure the height of the whole stack of the 6 GHL devices please? Also can I create the same setup that you have with the main devices or do I need any expansion cards on the profilux 4? Thank you very much 😊
Hi. Great video. Thanks for all you do. I am putting my tank together now. I have 3 GLH doser units like you, a profilux 4e, a Kh director and my Ion is on backorder. Since my GHl stack will eventually be exactly as you have here in this video, I was wondering if you could measure how tall your stack is so I can prepare the area of my stand to house it? Any help you can give will be much appreciated.
Great vid mate. Do you know if its possible to install one without the use of WiFi. Coz my WiFi is stuck on 5hz which I think won't work with it. My h2ocean p4 Pro I can't connect anymore aswell.
Interesting video, can I ask did you source the ION director from GHL direct? Disappointing news about the probe and transport issues, the email from the 26th August implies it may be another 4 months before we get the pre-orders
Yes, it's from GHL direct but I am part of the BETA testing team. It is, I am waiting on a new sensor myself as I had one of the original sensors. Hopefully it won't be too much longer for you buddy 🤞
@@NanoTankReefer fair play GHL kit is well made but getting anything out of their customer service isn’t easy! Hope it comes soon though, sold trident over 6 months ago and manual testing is a pain
@@jestronixhanderson9898 I really want a machine which can rest po4, I don’t know should I wait for ion director reveal the final parameter or just go with Mastertronic, there are quite a lot of the mastertronic owners report different bugs on the FB group...It’s a tough decision...
Totally angry with KHD and GHL Support. Within 8 months, they tell me to send it in for repair for the THIRD time. I decommissioned that garbage! Don’t buy it!
If you're looking for a how to set up an ION Director check out this video ruclips.net/video/bF2S5rm40Ic/видео.html
Nice vid Tris. That all looks very high tech!!
Cheers mate, it's a very clever piece of kit that's for sure
Interesting video. Thank you for sharing. Currently deciding between the GHL controller and Hydros
The Hydros controller is a super cheap option in comparison to the rest of the market. I've done little reading up on it though as currently it's not available to the UK market. I think both the GHL and Hydros would be great options
Mate that is a top quality video on a mega piece of kit. Thanks for the content. Your sump is clean enough to eat from 🙌
Cheers buddy, yeah I'm very impressed with it. Haha it's alot better since I've stopped using GFO
love this video mate, really well done, looks like a great bit of kit, i will be watching this closely!
Cheers buddy, it's a fantastic piece of kit
Well done, nice to watch. Thanks!
Thanks mate 🙂
Be interesting to see how you get a long with it over time, nice bit of kit, thanks
Definitely! I know the dosing pumps are great long term but it will be interesting to see if the sensor stands the test of time
I'll be in touch when I get mine. I'll just remember to check the pumps are calibrated correctly 🙈🙈
😂😂😂 it definitely helps the accuracy
Dear,
Thank you for the great information. Just question did you check the accuracy of the test results.
Regards,
I haven't yet, I want to leave it a few weeks for the sensor to settle. I have tested against a few off the shelf test kits and the results fall in line. Ideally I want to send off an ICP test to compare to
Is it worth me buying one with the up front cost of 1000$
Great video! 👍
Cheers San
Do I need both ion director and kh director for 300 gallons tank?
is the Profilux required or can you also control both directors plus the 3 Doser without the profilux?
Because I have the Profilux I opted for the slave dosers. You can buy the dosers and KH/ION Director sets as standalone. The standalone units do not require a Profilux
Hey there. Nice video. Just what I have been looking for. Could you do me a favor and measure the height of the whole stack of the 6 GHL devices please? Also can I create the same setup that you have with the main devices or do I need any expansion cards on the profilux 4? Thank you very much 😊
The whole stack is 430mm tall. No additional expansion cards are needed for my setup, just the main devices 🙂
@@NanoTankReefer awesome thanks. 🙏
Hi. Great video. Thanks for all you do. I am putting my tank together now. I have 3 GLH doser units like you, a profilux 4e, a Kh director and my Ion is on backorder. Since my GHl stack will eventually be exactly as you have here in this video, I was wondering if you could measure how tall your stack is so I can prepare the area of my stand to house it? Any help you can give will be much appreciated.
Great vid mate. Do you know if its possible to install one without the use of WiFi. Coz my WiFi is stuck on 5hz which I think won't work with it. My h2ocean p4 Pro I can't connect anymore aswell.
Very sexy bit kit bro 🙌🏻
It certainly is mate 🤓
Interesting video, can I ask did you source the ION director from GHL direct? Disappointing news about the probe and transport issues, the email from the 26th August implies it may be another 4 months before we get the pre-orders
Yes, it's from GHL direct but I am part of the BETA testing team. It is, I am waiting on a new sensor myself as I had one of the original sensors. Hopefully it won't be too much longer for you buddy 🤞
@@NanoTankReefer fair play GHL kit is well made but getting anything out of their customer service isn’t easy! Hope it comes soon though, sold trident over 6 months ago and manual testing is a pain
And just wait till PO4 comes onboard ! Oh yeh !
I don't think PO4 will tested using the ION Director 🤔
They have hinted at it :) they aid there’s another parameter coming , if it is , then it will sell like hot cakes
@@jestronixhanderson9898 I really want a machine which can rest po4, I don’t know should I wait for ion director reveal the final parameter or just go with Mastertronic, there are quite a lot of the mastertronic owners report different bugs on the FB group...It’s a tough decision...
Totally angry with KHD and GHL Support. Within 8 months, they tell me to send it in for repair for the THIRD time. I decommissioned that garbage! Don’t buy it!