Multumesc - Merci - Thank you soo much, George!! :-) It worked perfectly on my Dacia Sandero from 2020 here in Kerry / Ireland. (by the way, just a slight little difference in the display, maybe of interest for some users who dont see a single spanner: in that car - Sandero 2020 - there was not exactly just the spanner icon as in the video, but a similar icon with a car, an arrow AND the spanner. There I had to press >10 secs, than it was deleted / reset)
Thanks mate! It worked perfectly on my 2019 Sandero, its been bugging me for a month. I'll get a local garage to service it at half the cost of a dealer ;0)
Any Dacia with years 2017 and 2018 and some of 2019 you need a scanner to turn the light off,,,The dealership I got mine from said they would charge me 80 euro to turn it off ,,So that's 80 euro at least once a year for the life of the car,,,,And some dealerships won't turn the light off unless you get a oil change as well,,,So that's over 200 euros,,,,,,To make it worse,,Only some scanners will turn the light off,,,,I researched this extensively and I got the Launch CRP919x ,,It was a bit pricey at 500 euro,,But not only did it turn the light off but it's incredible what it can do ,,especially with the DPF system on the diesel ,,,Hope this helps...
On my 2019 it did not work after keeping it pressed in it flashed and then put a little car there however doing again with the car picture there worked perfect so might be slightly different on newer models 😊
The size zag light on this model is the service warning......if you can't reset it the way I do it on my video you need the diagnostic scanner to do it .....
If you mean you can't see the spanner icon in that case may need diagnostic tool to reset it I have never see 2019 to need diagnosis scanner for service reset but maybe it just happened Hope you trying with ignition switch on But engine off
@@georgetech380 Yep, I have ignition on, engine off. But the menu with the spanner icon is simply not there at all even though the Car manual states so :(
@@lobodpav so probably needs diagnostic scanner to reset the service intervals,on that model must be very rare,every Sandero I am doing 2018-+ I can reset it through the stalk switch here in UK Sorry I can't help more
Am încercat pe MCV 2018 și nu merge... Sau nu ma pricep eu 🤣 Bag cheia în contact, pun pe poziția de pornit, fără sa pornesc și țin butonul de setup apăsat, dar nu se întâmplă nimic pe orice afișaj as selecta, fie ca e pe temp, ceas, funcția setup, nr km total sau ultimul traseu... Pur și simplu nu-mi apare ca și ție... Adică nu-mi apar acele opțiuni cu mașina și MPG și încă vreo 2, 3 care îți apar ție... Doar se schimba cele la care am acces în mod obișnuit. Vreo sugestie?
@@georgetech380 I just bought an OBD2, but couldn't find any option regarding the service light, only about raising errors, I have one I'll try tomorrow to replace a sensor and I'll do a reset with Torque app but I doubt that will affect this service one too... I'll see... If you have any other suggestions about some different app that could be used for this one I'll greatly appreciate it. Thanks anyway!
@@FlorinBaci sorry I don't have any other suggestions because I was working on official Renault Dacia dealer and we was amusing the very expensive 4000€ + Renault Clip diagnostic laptop so I was able to do any job I wanted....I don't know what kind of obd2 tool you bought,and if can do cars after 2018 ......I have never use any other obd2 diagnostic than the Dealership level Scanner....check one of my other video how i do it on Dacia Logan ......is the same proses
Thank you, just serviced my neighbours sandero, did not know what this light was, now sorted. Great simple easy to follow video. Thanks, Vinny. 😎👍👍👍
Multumesc - Merci - Thank you soo much, George!! :-) It worked perfectly on my Dacia Sandero from 2020 here in Kerry / Ireland. (by the way, just a slight little difference in the display, maybe of interest for some users who dont see a single spanner: in that car - Sandero 2020 - there was not exactly just the spanner icon as in the video, but a similar icon with a car, an arrow AND the spanner. There I had to press >10 secs, than it was deleted / reset)
Thanks you mentioned
Thanks - Very clearly explained. Worked great on my 2020 Dacia Stepway.
Thanks alot George you saved me a trip to the garage thanks again
Fantastic worked for me on 2019 stepway roadtech many thanks good easy to follow vid
Thanks mate! It worked perfectly on my 2019 Sandero, its been bugging me for a month. I'll get a local garage to service it at half the cost of a dealer ;0)
Thankyou so much. Worked perfect on my 2019 Sandero stepway techrod
Many thanks, worked on my 2020 stepway.
Thanks, it works on my 2020 sandero stepway bluedci..👍👍👍
I am glad
It worked on my 2019 Sandero - many thanks
It works on my 2020 sandero stepway DCI.👍
Any Dacia with years 2017 and 2018 and some of 2019 you need a scanner to turn the light off,,,The dealership I got mine from said they would charge me 80 euro to turn it off ,,So that's 80 euro at least once a year for the life of the car,,,,And some dealerships won't turn the light off unless you get a oil change as well,,,So that's over 200 euros,,,,,,To make it worse,,Only some scanners will turn the light off,,,,I researched this extensively and I got the Launch CRP919x ,,It was a bit pricey at 500 euro,,But not only did it turn the light off but it's incredible what it can do ,,especially with the DPF system on the diesel ,,,Hope this helps...
Works perfect on my 2019 Dacia Sandero
Thank you for that, much appreciated.
Thanks very much it really helped
On my 2019 it did not work after keeping it pressed in it flashed and then put a little car there however doing again with the car picture there worked perfect so might be slightly different on newer models 😊
Super! I have sandero 2019! It was successfuly!
Perfect, thank you 🙂
This is a great help! Thanks!
Worked thanks George
Thanks for sharing!
Spot on, thank you
Perfect job
My model is 2017 dacia sandero. How to reset service & ziz zag warning lights
The size zag light on this model is the service warning......if you can't reset it the way I do it on my video you need the diagnostic scanner to do it .....
I have no wrench in my 2017 Sandero in on-board menu
You might have a warning orange zig zag light instead of spanner 🔧 ...
@@georgetech380 exactly and I can not reset by clicking right button
@@Superangel16 for this model I think you need diagnostic tool scanner
I have the same problem. Did you find a solution?
I have a Sandero 2019, the model just before the facelift. When pressing the button, there is no menu with the Key icon :(
If you mean you can't see the spanner icon in that case may need diagnostic tool to reset it I have never see 2019 to need diagnosis scanner for service reset but maybe it just happened
Hope you trying with ignition switch on
But engine off
@@georgetech380 Yep, I have ignition on, engine off. But the menu with the spanner icon is simply not there at all even though the Car manual states so :(
@@lobodpav so probably needs diagnostic scanner to reset the service intervals,on that model must be very rare,every Sandero I am doing 2018-+ I can reset it through the stalk switch here in UK
Sorry I can't help more
@@georgetech380 Thanks for your insights anyway! I guess I am the unlucky one :D
Same here - Sandero 2017 > no spanner Icon 😢
Hello i have duster 2017 not all the symbols service are appearing just the distance is appeared the other functions no what i can do
I have a video on Duster for the service light ,check it if is the same ,if not you need diagnostic scanner to reset it
INFO - New models after 2018 need diagnostic. Manual reset don’t work.
Almost all Sanderos after 2019 I am doing service reset with out diagnostic, the new Sandero from 2021 service reset from steering buttons all of them
@@georgetech380 mine is a 2019 facelift and this does not work
@@greggosling2807 Very strange
Daca are ecranul ăla mic unde nu iese mașina cu cheia cum se face ?
Will this work on a 2019 Logan?
Depends on year model yes will work
Am încercat pe MCV 2018 și nu merge... Sau nu ma pricep eu 🤣
Bag cheia în contact, pun pe poziția de pornit, fără sa pornesc și țin butonul de setup apăsat, dar nu se întâmplă nimic pe orice afișaj as selecta, fie ca e pe temp, ceas, funcția setup, nr km total sau ultimul traseu... Pur și simplu nu-mi apare ca și ție...
Adică nu-mi apar acele opțiuni cu mașina și MPG și încă vreo 2, 3 care îți apar ție... Doar se schimba cele la care am acces în mod obișnuit.
Vreo sugestie?
Sorry i dont know why .... maybe is one off the few Sanderos that manual reset not possible .....only with diagnostic scanner
@@georgetech380 I just bought an OBD2, but couldn't find any option regarding the service light, only about raising errors, I have one I'll try tomorrow to replace a sensor and I'll do a reset with Torque app but I doubt that will affect this service one too... I'll see... If you have any other suggestions about some different app that could be used for this one I'll greatly appreciate it. Thanks anyway!
@@FlorinBaci sorry I don't have any other suggestions because I was working on official Renault Dacia dealer and we was amusing the very expensive 4000€ + Renault Clip diagnostic laptop so I was able to do any job I wanted....I don't know what kind of obd2 tool you bought,and if can do cars after 2018 ......I have never use any other obd2 diagnostic than the Dealership level Scanner....check one of my other video how i do it on Dacia Logan ......is the same proses
This does not work on our 2018 stepway. The menue is not the same.
Very few of them don't work unfortunately You need diagnostic scanner
👍
No spanner in this one ?sign sti on
Is the previous Sandero 99% you need the diagnostic scanner
It doesn't work for dacia stepway 2017. 1.6. It need to be doing through Odb device.
Probably yes ,some Sandero required diagnostic scanner to reset
2017 non
Doesnt work
Na amblenderu se resetuje servis do 2016, na 2017 NE MOZE, tako da je video glup.