Very good and informative video, I will watch this one many more times and implement some of it on my F22. The way you're using the control surfaces shows how much thought that has gone into it, great stuff! 👍
- RATES* / EXPO (Roll - Pitch - Yaw) LOW: 50-60-75 / 65-50-00 MID: 90-100-85 / 75-80-30 HIGH: 100-100-100 / 80-70-30 *These rates assume maximum servo travels achievable with stock servos, after leveling out some throw asymmetries. TL:DR - I fly almost exclusively on high rates, so that's 100-100-100 full mechanical throws on all axis and 80-70-30% expo (Roll-Pitch-Yaw). HobbyEagle A3S3 settings *GAINS:* ROLL 70% PITCH 80% YAW 55% *REACTION CURVES:* ROLL - Normal PITCH - Sport YAW - Sport
@JoseOrtega-df3zj Maybe you can find some in Ali, but probably better just to get an A3S4 as it offers a few advantages over the S3, particularly for jets that use Elevons, as the S3 didn't allow indivividual settings of each control surface and could often lead to requiring the installation of a reversed servo, or having to manually reverse the polarity of the servo wires yourself.
Hi. I have the latest Ultra Performance version (purchased in March 2024). The AR8020T receiver binds fine, but the ESC keeps beeping and no controls are working. Can you please tell me the correct channel assignment? This version has a wire labelled as “Reverse Break”. I plugged that into channel 7. Am I doing something wrong? The manual is pretty much useless in this regard. Thanks!
I am not a Spektrum user. Since no controls are working, it doesn't seem so much an ESC problem but a power feed issue. How are you powering the jet up? It looks like your receiver is not getting any power supply so when you connect the battery the ESC complains that it receives no signal from the rx.
Did you mention your gyro gains in the vid or did I miss that part? What rates do you use for pitch, roll and yaw? Also I use gear based rates where i have an offset added for landings whe gears are out and the plane is slow.
Never mind, you fly with 100% gains LoL...I am not surprised that I haven't noticed any oscillating yet...I wil try a higher gain setting next flight now...
@@xXRapToRiXxGamer Well, not exactly, my master gain is at 100% but I use different gains for each axis. Roll is the one with smaller gains IIRC because it's the first one to oscillate. Also, if you overdo yaw gains, the plane feels very stiff and doesn't turn naturally, but at that point, it's all pretty much personal preference
@@RC4ever Ok thx, can you tell me those 3 gains? roll and yaw would be very nice because I am still fiddling around with those 2 in particular. Thx and have a nice Weekend
@@xXRapToRiXxGamer I don't have them written down, would have to plug the jet to the computer... will try and remember to pick them up next time I want to adjust it!
YES!!! I have waiting for this video. Appreciate the hard work to do what you do. Thank you for the inspiration to push myself and my planes. 😊😊
w00t!
Love to hear that! :D
I wonder which one will I do next... MiG, Gripen...? Hmmm... :p
Very good and informative video, I will watch this one many more times and implement some of it on my F22. The way you're using the control surfaces shows how much thought that has gone into it, great stuff! 👍
Thanks Tobias, glad to be of use! :D
Hit me up if you need anything! ^^
This is an excellent setup video- thanks very much! Now all I have to do is learn to fly like you!
Thanks!
Practice makes perfect, the more you fly, the better! 😀
Wow... you are such a wonderful flyer. Many thanks. :-)
🥰🥰🥰
- RATES* / EXPO (Roll - Pitch - Yaw)
LOW: 50-60-75 / 65-50-00
MID: 90-100-85 / 75-80-30
HIGH: 100-100-100 / 80-70-30
*These rates assume maximum servo travels achievable with stock servos, after leveling out some throw asymmetries.
TL:DR - I fly almost exclusively on high rates, so that's 100-100-100 full mechanical throws on all axis and 80-70-30% expo (Roll-Pitch-Yaw).
HobbyEagle A3S3 settings
*GAINS:*
ROLL 70%
PITCH 80%
YAW 55%
*REACTION CURVES:*
ROLL - Normal
PITCH - Sport
YAW - Sport
I am trying to find the Hobby Eagle A3 S3 and I find it . I see a A3S4 but not a s3
@JoseOrtega-df3zj Maybe you can find some in Ali, but probably better just to get an A3S4 as it offers a few advantages over the S3, particularly for jets that use Elevons, as the S3 didn't allow indivividual settings of each control surface and could often lead to requiring the installation of a reversed servo, or having to manually reverse the polarity of the servo wires yourself.
@@RC4ever got it thanks!
@@JoeElPadrinoRC-df3zj 👍🏼
Hi. I have the latest Ultra Performance version (purchased in March 2024). The AR8020T receiver binds fine, but the ESC keeps beeping and no controls are working. Can you please tell me the correct channel assignment? This version has a wire labelled as “Reverse Break”. I plugged that into channel 7. Am I doing something wrong? The manual is pretty much useless in this regard. Thanks!
I am not a Spektrum user. Since no controls are working, it doesn't seem so much an ESC problem but a power feed issue. How are you powering the jet up?
It looks like your receiver is not getting any power supply so when you connect the battery the ESC complains that it receives no signal from the rx.
@@RC4ever Fixed it already. Thanks anyway!
@@mathbrainius What was it?
Did you mention your gyro gains in the vid or did I miss that part? What rates do you use for pitch, roll and yaw? Also I use gear based rates where i have an offset added for landings whe gears are out and the plane is slow.
I didn't touch on the gyro settings, only the radio, true that.
Never mind, you fly with 100% gains LoL...I am not surprised that I haven't noticed any oscillating yet...I wil try a higher gain setting next flight now...
@@xXRapToRiXxGamer Well, not exactly, my master gain is at 100% but I use different gains for each axis. Roll is the one with smaller gains IIRC because it's the first one to oscillate. Also, if you overdo yaw gains, the plane feels very stiff and doesn't turn naturally, but at that point, it's all pretty much personal preference
@@RC4ever Ok thx, can you tell me those 3 gains? roll and yaw would be very nice because I am still fiddling around with those 2 in particular. Thx and have a nice Weekend
@@xXRapToRiXxGamer I don't have them written down, would have to plug the jet to the computer... will try and remember to pick them up next time I want to adjust it!