The amount of fabrication for this little go kart is awesome, I have a lot of admiration for how far you guys are willing to go on such a small car. Makes me wish I had a garage so bad lol
The Barbie GT50R, now available at Wal-Mart! Seriously though, your production value and content is amazing. That Idaho sunset is almost as beautiful as the blood orange sunrises here in NW Washington with all those forest fires going.
As a car guy I must say this is crazy you guys should NEVER stop doing what you're doing. Can't wait to see what this thing does once you have all the bugs worked out.
Muscle Vs Tuner I put a turbo on my 420cc preadator and I have a top performance air filter and a straghit back exhaust gonna make a vid soon maybe I can make it to the news to lol
There's typical off the shelf kits to outfit small air cooled single cylinder carbureted engine to fuel injection, it only needs a few input signals to convert to fuel injection that's programmable for boost
Don’t forget new chassis for rigidity, new wheels and tires, new suspension, new steering assembly. It’s essentially a gocart. So it’s going to cost more than $100. A lot more.
Last time I went to the dump I pulled out a Jeep Hurricane.. Ya know the big one with the fake engine cover up front. Everyone says they want to build one of them but havent seen it yet. I want too just haven't had the time
Your flowing too much current through the pump man you need to put a speed controller on it then it will work it’s a scavenger pump it’s not meant to really build pressure so you need to take the speed of the engine down in order for it to constantly run hope this helps hopefully you see the comment
not only are you bad at being a smart ass, but uneducated. pumps create flow. if you go to any mechanic and say your oil pump crates pressure for your system he will immediately know you're brain is less dense than your air-less bike tire.
No idea how I found you guys, but this is the sickest thing I've seen, I love it! AWD that thing next hahaha! Also gotta add, the quality of your filming, editing, lighting, angles, transitions, use of music... All great, fantastic work. Very impressive!
Just got a go kart and first thought was turbo. Second was, I know the grind hard boys had to have made one. Third, seeing how much Ethan has bulked up over the years is nuts.
Haha! I seen someone in the comments suggest a turbo for this & I was thinking how crazy that would be... Then you guys actually did it! Insanely awesome!!!
Though they need to finish it and unfuck up multitude of things, like fuel pump as oil pump, when engine has its own oil pump. Trow that carburator away and fit in off the shelf fuel injection kit, before they fuck up whole engine running it lean. And there is many other problems with this cart.
How could you guys be normal people ONLY legends can do this Every video i watch make me love this channel and love you guys more and more #all the respect
I had a little turbo like that and I was experimenting with it and supposedly a vacuum cleaner can make one of those little turbos go insane as a little fan
Your transfer pump for the oil only needs to run when pressure drops, it will run more often as the oil heats up. The bright side is if it shuts off, its primed. So you can rest easy that there is oil on the bearing. I have a 1980 cm200t Honda that I have been wanting to twin turbo with this exact turbo. To be different and be able to climb hills on the high way without slowing down. Its a kick only bike, so I plan to replace the starter with an oil pump. To re power hot wheels when we were kids we hooked a chain to it and pulled it with the neighbors dad's suburban. It wasn't safe but it was fun.
Please during fabrication can see your protecting your hearing big thumbs up but they won’t stop you ending up blind so please make an example and use protective glasses to ! Safety is not a dirty word boys 👍🏻
I’m confused is the engine he used a two-stroke or four stroke because if it’s a four stroke it just won’t run well and if it’s a two-stroke it’ll run good but burn a hole in your piston
U should add turn signals and hazards, brake lights that turn on when you stop just an idea (don’t have to follow) love ur channel btw. I love content like this. :)
@@shaharyarkhan6382 no he is right it would ruin the point of a Power Wheel why because Power Wheels always have sticker lights they don't add real lights only on the premium versions plus this is only to have fun not to drive on the street it's not your car to go to a grocery store it doesn't need turn signals
@@shaharyarkhan6382 but why the freak are they going to add turn signals this is for doing drift not going on the road as a daily driver sorry to say but don't recommend stupid stuff
Im sure you already have changed it but if you haven't and it's still stock; change your CDI box to a Big Gun over rev. It gets rid off the rev limiter and has a more aggressive curve. It makes a difference on the 150/230 platforms.
The amount of fabrication for this little go kart is awesome, I have a lot of admiration for how far you guys are willing to go on such a small car. Makes me wish I had a garage so bad lol
It’s been a crazy amount of work for sure but we are really excited to put similar time and love into real cars as well! - Edwin
But that is a real car ;(
They do sell pretty nice pop up garages company shelter logic
Gasd
Well said
When he says "I have a turbo mustang with composite body"
WingManGT hahaha yes!
I wonder what the power to weight ratio is?
sexyness
Lmao
@@fontenot413 1 foot pound of torque per ounce of weight
Man I love these small projects 💪🏼
Fooligan sorry u guys didn’t try hard enough haha
Fooligan lol
Fooligan fooligan your my fav
You call this a small project??
Quite literally small
Now his daughter got caught doing 60 in 30mph zone😂😂
Why does it need to be a daughter hmmm
@@simple_theo erm because it's pink and it's a Barbie car, aimed at girls?
Yeah dude duh
I would've loved a turbo barbie jeep tbf
@@simple_theo because barbie car
All jokes aside i really need some friends like you guys i swear
2:30 Smart dog. He's already learned to stay under then bench when you're screwin around with engines. Lol
Kittelizer Laurelott lmaoo😂😂
The Barbie GT50R, now available at Wal-Mart!
Seriously though, your production value and content is amazing. That Idaho sunset is almost as beautiful as the blood orange sunrises here in NW Washington with all those forest fires going.
Lol
The RTR Barbie.
I would take you guys as neighbors at ANY time!! The creativity and problem solving to complete the Barbiestang is fantastic to watch..
Thanks!
It is simple.
I see someone on RUclips turbocharging a barbie mustang, I subscribe.
same here
Same
that intro with the drone, probably the best intro ive ever seen
Thanks man!
As a car guy I must say this is crazy you guys should NEVER stop doing what you're doing. Can't wait to see what this thing does once you have all the bugs worked out.
Accidentally clicked this video while rearranging pillows. Looks like this is an alternative to carsandcameras channel.
Sweet.
this is amazing i can’t wait to see the next one
I am a gearhead in the making, and this... this is beautiful. This is absolute insanity but somehow more. I cannot put into words how insane this is.
this is not normal you are the best
69th like ... Nice
We must have a different definition of normal.
I think you meant beast 😁
Hola you
Jai you
Officially the sickest Barbie Mustang on Earth. Hands down, no questions asked.
This is solemnly the most impressive thing I've witnessed EVER.
The type of power wheels I wanted as a child.
This popped up in my news feed so I had to watch it lol Great job guys 👍🏼 Badass
Love your vids 👍
turbro > muscle vs tuner
Muscle Vs Tuner I put a turbo on my 420cc preadator and I have a top performance air filter and a straghit back exhaust gonna make a vid soon maybe I can make it to the news to lol
the best and the most genuine car project from youtube
Yall need to show hoonigan how to build a xxl drift cart. They failed. Yall accomplished.
Yall, yall yall
because brad made it lol
Finally someone realized that
yeet yeet
h
There's typical off the shelf kits to outfit small air cooled single cylinder carbureted engine to fuel injection, it only needs a few input signals to convert to fuel injection that's programmable for boost
Daniel Bargas been looking for a while and never saw anything like this. Point me to it if you can please.
I've never watched one of ur vids before but I think I'll start because when I realized it was a powerwheels barbie car, i started cracking up
They have a bunch of crazy builds like this on there channel!
How could you be so stupid as to think it's anything else but a toy car
The intro drone shot is sick!!!!
Every time I see someone throwing out one of these electric kid's cars, I want to throw an engine in it lol.
And here you gotta pay hundred to even trash condition one, those are not that common here.
Don’t forget new chassis for rigidity, new wheels and tires, new suspension, new steering assembly.
It’s essentially a gocart. So it’s going to cost more than $100. A lot more.
End Of The Month Ppl Throw out everything and a ton of this i pull them and drift corners with a dirtbike
Last week I had to throw a barbie jeep away :,(
Last time I went to the dump I pulled out a Jeep Hurricane.. Ya know the big one with the fake engine cover up front. Everyone says they want to build one of them but havent seen it yet. I want too just haven't had the time
that turbo noise sounds like when you lose your wanted-level on gta
Anton Carlsson dude yes
@@Jyrsky no
@@EbolaSquirrel get ratio’d
Your flowing too much current through the pump man you need to put a speed controller on it then it will work it’s a scavenger pump it’s not meant to really build pressure so you need to take the speed of the engine down in order for it to constantly run hope this helps hopefully you see the comment
pumps don't make pressure.
@@paulrice2863 yes they do
paul rice
Now we know why your bicycle tires are always flat....
Yes unless your pump is from the dollar store they create pressure
not only are you bad at being a smart ass, but uneducated. pumps create flow. if you go to any mechanic and say your oil pump crates pressure for your system he will immediately know you're brain is less dense than your air-less bike tire.
Those shots at the end were sickk
No idea how I found you guys, but this is the sickest thing I've seen, I love it! AWD that thing next hahaha!
Also gotta add, the quality of your filming, editing, lighting, angles, transitions, use of music... All great, fantastic work. Very impressive!
Just got a go kart and first thought was turbo. Second was, I know the grind hard boys had to have made one. Third, seeing how much Ethan has bulked up over the years is nuts.
Haha! I seen someone in the comments suggest a turbo for this & I was thinking how crazy that would be... Then you guys actually did it! Insanely awesome!!!
Though they need to finish it and unfuck up multitude of things, like fuel pump as oil pump, when engine has its own oil pump. Trow that carburator away and fit in off the shelf fuel injection kit, before they fuck up whole engine running it lean. And there is many other problems with this cart.
The dog just casually crawled underneath the table 2:16 🤣🤣🤣
How could you guys be normal people ONLY legends can do this
Every video i watch make me love this channel and love you guys more and more
#all the respect
From one Plumber to another, I love the method of your madness.
Barbie car is becoming so ridiculous... so kool
That is the hottest turbo Mustang I have ever seen. Can't wait to see what it does in the 1/4.
Omg🤯🤯🤯 turbooo!?!?
Great video, everything about it is perfect!!!
Please never stop.
That’s the plan! Make everything faster and keep making videos! - Edwin
Is there no end to this awesomeness?! Somebody crown this guy
This came up as a recommended video, watched a few seconds and I’m subscribed, that is comical and awesome all rolled into one.
I had a little turbo like that and I was experimenting with it and supposedly a vacuum cleaner can make one of those little turbos go insane as a little fan
This channel deserves 1million 🙂👌 I love this channel..
Hi
Tru
Your channel is awesome!! Enjoying very much seeing some Idaho brothers rocking the creativity!
Imagine having one of these in your child hood
Y’all are badass! I’m originally from north Idaho, rathdrum. Now living in Florida
I think front camber by it self is fine, better for drifting👌
Beatiful fotography in the end
Great video guys!
At last, people who actually research and try to do this right! I'm impressed!
I used to build non turbo cars into turbo tuners but this is WOW!!!🤑
Turbo barbie car AND rad music?
Subbed.
Your transfer pump for the oil only needs to run when pressure drops, it will run more often as the oil heats up. The bright side is if it shuts off, its primed. So you can rest easy that there is oil on the bearing.
I have a 1980 cm200t Honda that I have been wanting to twin turbo with this exact turbo. To be different and be able to climb hills on the high way without slowing down.
Its a kick only bike, so I plan to replace the starter with an oil pump.
To re power hot wheels when we were kids we hooked a chain to it and pulled it with the neighbors dad's suburban. It wasn't safe but it was fun.
Cool build! I'm in Spirit Lake. Glad to see North idaho on RUclips!
I sure wish I had the patients and the want too's to do something like this. This badass in my opinion.
Good grief. Why am I just now finding you dudes? This cart is friggin AWESOME!
The way the body flexes reminds me of a funny car.
>saw first 15 seconds
>subbed
never change, this is some of the coolest and most real content ive seen in a while
Please during fabrication can see your protecting your hearing big thumbs up but they won’t stop you ending up blind so please make an example and use protective glasses to !
Safety is not a dirty word boys 👍🏻
AWESOME is the only word that comes to mind!
I was watching hot wheels and end up here, got to say I really admire what u guys do, a lot hours of work and patience that's for sure, big like 👍
i have so many ideas just watching your videos. Love it.
Sick!!! You guys gonna be a big channel soon my dad is mad at me because I stripped my bike and started building a gokart
He's probably mad because he spent the money. Don't destroy other peoples shit its just common courtesy.
@Crusty Sock f u
@@yvngkidbuu6364 f u the most
no u
yvngkidbuu but its already HIS motorbike so he can do anything to it.
Awesome video guys. Inspiring me to go out and copy you.
Make sure you dont run it lean! You will melt your piston. Fix your fuel problem before running it.
lean is efficient if you go extreme (18:1)
@@ellenorbjornsdottir1166 lean is mean, haha its so bad for the engine tho
I’m confused is the engine he used a two-stroke or four stroke because if it’s a four stroke it just won’t run well and if it’s a two-stroke it’ll run good but burn a hole in your piston
Señor Burrito it's a single cylinder 4 stroke pitbike engine
its like a honda xr200 engine or something like that.. lol
watched for 10 seconds then subscribed yes
Finally someone who understands the value of wearing hearing protection
Just found this channel and this little barbie car build is awesome! Cant wait to see it running.
2:13 Doggo.exe has been hidden
This is the lord's work...
Finally a real mustang 😂
I love how your dog knows we’re to lay out of the way. Good dog lol
i like how the license plate casually says 'Fisher Price'
And use 0w-20 oil for the turbo’s oil system, you’ll be able to flow more oil from the pump and have less resistance in the bearing.
the quality of this video is so pure you should have 2m subscribers at least but you will soon
Thanks man! That’s the dream!
lmao I love how the dog just chills under the table
"BOUNS VIDEO" !!💪😂
Yeww
Called banjo bolt due to “banjo” shape of banjo fittings. Badass project btw!
Barbie wanted more power
She got want she wanted
Come on Barbie let's go party. Psssshhhhhh stu stu stu
this is sick, you have a new sub. Can't wait to see some custom fab on real cars! the mighty car mods of the idaho!
Camera dude looks high.....all the time.
I think your mistaking being high with being tired from hard work
Sean Horton So do I lol.
he probably is lol
me too
Sean Horton Facts 😂😂
Im from and live in south idaho great to see yet another channel based in this beautiful state!
Wow didn’t think I’d be so interested but I actually ended up subscribing lol
What a humble guy's... keep it up... grate project
Should race BoostedBoiz shoppingcart when its turbo'd aswell!
I wish i studied mechanics this looks so cool
U should add turn signals and hazards, brake lights that turn on when you stop just an idea (don’t have to follow) love ur channel btw. I love content like this. :)
Crusty Sock how would it ruin the point? It’s just an add on
Crusty Sock bruh the lights are definitely not sticker lights
@@shaharyarkhan6382 no he is right it would ruin the point of a Power Wheel why because Power Wheels always have sticker lights they don't add real lights only on the premium versions plus this is only to have fun not to drive on the street it's not your car to go to a grocery store it doesn't need turn signals
purple Dorito RBLX wait if you look in the vid, the lights aren’t sticker. They are actual lights. Example of the lights, look at rear at 9:33
@@shaharyarkhan6382 but why the freak are they going to add turn signals this is for doing drift not going on the road as a daily driver sorry to say but don't recommend stupid stuff
I'm not so far away from you guys. Just across the border in B.C. Good videos.
Wanna be super famous? Recreate fast and the furious original drag with these cars :p. Even make a wheelie dodge :p
2:14 doggo found a chill out spot lol
Buen vídeo 👍 lo e visto de casualidad. Y por a qui me quedo . Impresionante 👍 saludos de españa
That Turbo Is Cute AF
Its a mustang..
Shoulda supercharged it 😂😂
Finally, somebody built a competitive Mustang
Barbie car drag race
Awesome build! Resourceful!
HOLD UP! you say idaho?!?!? a youtuber, in... IDAHO!?!?!?
Not uncommon. Lol
Sub 2 me or I'll call the cops then call the cops
What part?
Bet you can’t find a RUclipsr in Wyoming tho!
Shaytards has been around for over 10 years on RUclips and is one of the biggest channels out there and they're from Idaho
haha, that dog is awesome, and it crawled under the bench for a nice lie down, lol. damn i miss my dog. :)
Wow...It's looks like Honda GL 144cc machine in Indonesia
Im sure you already have changed it but if you haven't and it's still stock; change your CDI box to a Big Gun over rev. It gets rid off the rev limiter and has a more aggressive curve. It makes a difference on the 150/230 platforms.
May aswell slap a FIAT badge on er and sell it for 20k lol
this is the first video of yours i've seen and i enjoyed it a lot. great editing too. very cool.