Only found that out a few days ago while watching reviews of the S1😂. It works really well, just a shame it’s not something that’s built into the machine.
@@plentifulprops3d There's a "chimney silencer" design on printables that goes OVER that tree silencer and provides a lid that makes it even quieter. It was made for the S1 but since it looks like they included the same silencer design for the T1, it should work for you too. If you type "s1 chimney silencer" into google it'll come right up.
It is not surprising at all that the cooling was not enough when you printed a bridge in like 300mm/s. How would it possible cool that filament without having the fan on that spot for more than 0.01 second? It does not matter how fast that fan is zooming.
Slightly too small build volume for the massive size in my opinion. I cannot afford this much space for the printer. Camera with low light is really weird. Even bambu x1c has too low light, this must be pitch black. I dont like your clickbaits recently. The come off as uneducated and sensational news evening report that youtube told you to add to your videos so they dont fall flat. The extra clicks dont warrant screwing over all titles and thumbnails of all of your videos in the archive. Keep them to the point. Your subscribers should matter more than a few spontaneous clicks I hope. Else why are we even here.
what's clickbaity about the title? It's a review, the printer is fast, and the prints suffer from a result of its speed. don't confuse being consise and incentivising views with clickbait.
I appreciate the effort you put into making your videos so detailed.
The cone is a muffler for the cpap fan on the top. You can place it on the top of the cpap fan intake to reduce the noise
Only found that out a few days ago while watching reviews of the S1😂. It works really well, just a shame it’s not something that’s built into the machine.
@@plentifulprops3d There's a "chimney silencer" design on printables that goes OVER that tree silencer and provides a lid that makes it even quieter. It was made for the S1 but since it looks like they included the same silencer design for the T1, it should work for you too. If you type "s1 chimney silencer" into google it'll come right up.
My T1 will be delivered next week, thank you for sharing
T1 is a beast, when you use it to print a lot of models, you will understand why I say this
Can’t wait for part 2 of your glove project! Good stuff!
Thanks!:)
Hi, Just found your Channel , si awesome! Grettings from Chile 🇨🇱!!
Pd: can you make a neuralyzer fron MIB? 👏🏻
It's a silencer the firmware has a known typo issue apparently you are supposed to set it on top of the exhaust port and it drops it around 20db
So the firmware etc issues are better now?
Speed: ❌️
Reliability: ✅️
How long and how thick can I make a cylinder with that 3D printer? I’m trying to make a aeroponic tower with this one
Can't wait for that glove PCB
Bro love your content. keep it up brother. Also u should make a discord channel
thanks! and I might one day, but there are already great discord channels in this specific niche that I don't see the point of oversaturating it atm.
Where is the Multicolor printing capability?
Why would you buy this over a bambu, it’s huge, loud, and the quality is so so
It is not surprising at all that the cooling was not enough when you printed a bridge in like 300mm/s. How would it possible cool that filament without having the fan on that spot for more than 0.01 second? It does not matter how fast that fan is zooming.
Are you for real bro? Are you kidding me?
Oh no... You called Snorlax a cat figurine...
it was label as cat on the printer aswell lol
@@bowl7559 🤣
the cone thing is to sit on. jk jk, it did not feel good
It's on time lap so not real speed
I guess this printer has no lights inside
It does, I forgot to mention it. The smoked glass door makes it really hard to notice from the outside when it’s closed though.
@@plentifulprops3d oh so it comes with the printer? Do you have to install it ?
No installation required, it’s built-in:)
@@plentifulprops3d ty for updating me
Muffler
IM SECOND!!! 🎉🎉
Slightly too small build volume for the massive size in my opinion. I cannot afford this much space for the printer. Camera with low light is really weird. Even bambu x1c has too low light, this must be pitch black.
I dont like your clickbaits recently. The come off as uneducated and sensational news evening report that youtube told you to add to your videos so they dont fall flat. The extra clicks dont warrant screwing over all titles and thumbnails of all of your videos in the archive. Keep them to the point. Your subscribers should matter more than a few spontaneous clicks I hope. Else why are we even here.
what's clickbaity about the title? It's a review, the printer is fast, and the prints suffer from a result of its speed. don't confuse being consise and incentivising views with clickbait.
First