question, what if you need these for profesional applications, like managment on office building scale. think, 30+ workstations, a network room and server room?
I do wish they showed the slots in the powerbar for more than a quarter second, anyone technically inclined will get it when they see the slot in a power bar but still
@@JohnDoe-hw8geanyone buying cable management solutions will be able to figure out what part of the power bar this is supposed to mount to, It's not that hard to figure out
This was what got me. Will absolutely be getting one. Idk about the rest I've already cable managed pretty well, but my power bar and power bricks need better management.
There are a few shot where you can tell Tynan is uncomfortable on camera, but he did a very good job presenting! Everybody hating, but getting someone to pay you do advertise your own product is a baller move. Respect.
Honestly, there is no way you can make magnets strong enough to let you pull out an EU plug. At that point the magnets would be strong enough to bend the sheet metal they are attached to lol. You'd probably have to hold it with one hand and pull it with the other.
Okay. This video was greatly needed for me and a fantastic video. I've had this cable management set since limeday 2024 and now I'm finally making my desk pretty. Power bar key is amazing and I could use these for so many things in my life
After just watching today’s Apple Event… this video gave me the same vibes… clean presentation, smooth voice + explanation, great product demos, showing off extra tricks’n’tips to enhance user experience and you finish with the packaged kits! So respect to you all at Team LTT for this amazing product design and impressive video showing it off. Apple won’t admit it but if they did they would be proud :P You are just missing one thing… fancy flying around scene cuts to this segue!
A use case for these that I've been talking about on my socials is for telescopes. Astrophotography setups using telescopes have to deal with loads of cables and cable snags are a big risk. As telescope tubes are metal, magnetic cable management options is AWESOME!
Those are neodymium magnets, these are very expensive, very premium kits that they have put together. Yeah it sucks that these are very expensive but that's the cost of quality
Not cheap, but genuinely top notch solution .. working from home on a sit/stand desk (both gaming PC and work PC hooked up to 4 monitors and tons of peripherals) and these were a godsend.
Originally, I've only seen Linus bring out the arches in LTT videos, and I thought "That's it? two magnets to a plastic injection?" I changed my mind, I'm really surprised to see this much effort put into these series of product, looks great. Especially the flipping over the thumb tab for various keyhole slot length, thats amazing.
THIS is the video that should have been out on launch day for MCM. I don't get why it wasn't out then, but I'm glad its out now.. both to show off the product, and for a little how-to for some of the elements not as intuitive for everyone.
YES! Finally showing off the full kit in its full glory! This had been sorely lacking. Something to add: Those keyhole shapes on the power bars? They are NOT LEGAL in some countries (like germany, which I found out after running to the hardware store with the "power bar keys" in hand). So before finding that out I had quite a bit of trouble figuring out how the power bar keys would work, which this video now finally shows in detail. Also, now I now all the ways I can still use them! Thanks Tynan.
Seeing how that one extra large Arch was able to lift 30 lb, That would suggest these are all neodymium magnets and they are ridiculously strong, they probably have this in a product warning but do not put your hand between these magnets and anything metal, especially on the larger cable management arches, these magnets will not bite or pinch. They will amputate whatever part of you is between The magnet and whatever it's attracted to
This might be a silly question but, is there any risk of the magnets to introduce some potential latency/noise/interference to the cables? (Ethernet, HDMI, DP, USB, etc I'm aware some cables are shielded so that they protected but, I just wanted to know
From the testing we did there weren’t any measurable differences for usb, hdmi, nor, DP, we did some qualatative testing on analog cables and didn’t see any changes either. Most electronics aren’t impacted by high strength static fields though some parts that have or generate their own fields may behave weirdly like motors, inductors, relays etc.
Brother I remember you teasing this on wan show years ago! Glad to see it's finally rolling out right as I began remodeling. I'm definitely buying thi- *sees price* ..I guess ill stick to diy
This is a really good product. I will get some when I can afford them! I hope they continue to make these kind of new innovative stuff for lttstore and not just merch
100 pack of the same cable ties(just without LTT logo) and an idk-how-many pack of staples is like 5-10 bucks. A lot cheaper than even one of these kits. I have the underside of my desk managed like that - I stapled the ties to my desk(wood veneer) and it works a treat.
Objectively better considering the margin they are making on these. Strong magnets are cheep nowadays. I wish i had a 3d printer because i bought a set of magnets for like $20 expecting them to be poor quality because there were so many. They ended up being way to strong and now i have a bunch of magnets laying around and could probably make 8-10 archs if i had a 3d printer.
@@littlejack59 bambu lab is having a sale you can get one of the best starter printers in the world the A1 mini for £169 for the next 3 weeks then it gos back up to £229
6 месяцев назад+2
Shipping and taxes to EU doesn't make it reasonable for me to buy it anyways. So I'll just 3D print this as well...
do these hold up a power supply like from inside a desktop tower? I would like to attach an atx psu under the table using these magnets if they are strong enough.
In the beginning talking about it being a lot of work to do adjustment and the telling us we need to screw in or permanently adhere the baseplates.... Just use some screw in hooks.
I bought a ton of these already. Spend over a grand on them. I have yet to open the box and put them to use though. I'm sure when I move house, I'll find a reason to take them out. At this point, I kinda have everything in a place (not a great one) where it makes it hard to need a device like this.
You guys should make something for frequently used cables like USB charging cables. Like a self-winding reel. Something to suck up the excess cable when it's not in use.
That was dry but still very informative. Felt like an old 90's intake video at a big box store. I'm sure as time goes on you'll feel more comfortable in front of the camera.
I missed a clip of how steong the adhesive on the the Standard Plates plates is and do they leave residue when pulled of (and if yes how easy is it to remove)
Well you can always take a hair dryer be it on low medium or high heat at a certain reasonable distance of say I don't know 8 inches away something around there and heat certain parts of it for a few seconds as you gently pull it off and there's a chance that it evil either will leave no residue or very little residue at all and listen to Chance you can pull off paint if you have one of those desks that has cheap paint on it
I don't see why I should get this instead of strong doubblesided tape and zip ties. That's what I used and it works great Edit: I don't doubt the product works and I'm not hating. Just that in my usecase my table is wooden and drilling holes or taping the mounts for the magnes just seems like extra steps. I'd be more understanding if tables generally are magnet compadable but usuallt they're made out of wood. As you mentioned it's streanghts is adding or removing cables fairly easy, but I'd only remove things if I had to move or remake my entire setup and adding cables is easily done by just ziptieing another cable to my current cableruns. but you make a good point glad to see other perspectives :-)
Well, your solution is semi-permanent if not permanent, if you want to switch out one cable or add one it'd be a pain with zip ties and double sided tape. With their magnets its much easier.
@@EyDavidI don't see how these magnets would be significantly easier than zip-ties or reusable zip-ties. With magnets you have to hold up the cables, remove the magnet, add new cable, add magnet. With (reusable) zip-ties you have to hold up the cables, remove the zip tie, add new cable, add zip tie. Please explain how the first is significantly easier? And unless your table is magnetic their product is more permament (I consider putting a hole in your table permament).
@@Jehty_ First off you don't have to drill into the table, though I think that doesn't matter. You can use their tape product or use your own double sided tape. Second off I think it's way easier to pick up and place a magnet that to undo and redo a zip tie.
These look great. Kinda steep for what you'd need for a desk setup. Exactly the type of product I got a 3d printer to rip off, I mean copy, I mean reverse engineer
I'm watching without sound, but did they test cable data transfer with and without the magnets? I know they had a cable tester for weeding out bad hdmis.
Yup! I tested every compatible cable with our cable tester and noticed no differences in eye diagrams etc before and after. We also did some qualitative testing with analog cables like coax and didn’t “see” any difference though that wasn’t quite as technically robust of a test
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
Sell your old graphics card the easy way and offset the cost of your new card at jawa.link/SCJune24
Now you release these. I needed the a while back. I'll be in touch.
question, what if you need these for profesional applications, like managment on office building scale.
think, 30+ workstations, a network room and server room?
Warning! Tynan without beard sponsor segment.
That really freaked me out. Who was that weird dode and what was he doing with Tynan's voice?
Dear God, the virus is spreading.
That's what you get when you don't let the clones cook long enough.
We needed that like when Linus shavedd his eeeek😅
No, not Tynan too!
Wow! They had an ad in an ad 😂. Cool stuff though.
Still doesn't come close to the April's fool segue sponsor video, that ways epic.
more of a video tutorial for a product than an ad they have already advertised them loads
@@BobaPhettamine its an ad
@@JesperValentine they are showing you how to use it not telling you to buy it, it's a tutorial
So they monetized ad for their stuff so we could watch an ad before the ad, and then had an embedded ad in the ad.
The power bar key is so thoughtfully engineered, damn.
I do wish they showed the slots in the powerbar for more than a quarter second, anyone technically inclined will get it when they see the slot in a power bar but still
@@JohnDoe-hw8geanyone buying cable management solutions will be able to figure out what part of the power bar this is supposed to mount to, It's not that hard to figure out
This was what got me. Will absolutely be getting one. Idk about the rest I've already cable managed pretty well, but my power bar and power bricks need better management.
are ju gong to sel the big cabel tis
Shaved Tynan is cursed he looks like he isn't an engineer anymore
He just looks like better Linus now
I shaved my Tynan once. Couldn't sit for a week.
I think he grows a beard so he doesn’t look like he’s too good looking for us nerds 😂
RCE would be pissed
Shaved tynan looks a bit like Ray William Johnson to me
Only Linus to make a video about his own product and even squeeze a sponsor in.
That's not Linus, I think.
@@TomGreen99 it's not, it's Tynan
Budget Linus.
The screwdriver video had a sponsor spot as well lol
Yet you are still here watching lol
It's like Linus and James had a baby.
We should name him Janus
I guess Linus did more than dance on the table for him... ;)
@@MikeGoesBoomRandom MGB encounter😂
@@flareflo362 I am everywhere
@@MikeGoesBoom No, you are MGB.
the jump from bearded to shaved got me lmao
My brain is not good with faces. It swears it's two diffetent people! 😅
A sponsor for an ad. Truly great times.
I resigned myself to it over a decade ago when looking at Superbowl commercials on RUclips and I got ads playing before the video played
There are a few shot where you can tell Tynan is uncomfortable on camera, but he did a very good job presenting!
Everybody hating, but getting someone to pay you do advertise your own product is a baller move. Respect.
Getting a sponsorship for a promotion of your product is so smart even Ryan Reynold would be impressed.
4:40 I would like to see you unplug an EU plug like that.
That's what I thought as well.
No way this will hold up when unplugging a Schuko-plug if it already moves that much with a us-plug.
Would be interesting to see what EU customers who have got this say
A UK three-pin plug would be even worse - I don't see any magnet holding up to that!
Honestly, there is no way you can make magnets strong enough to let you pull out an EU plug. At that point the magnets would be strong enough to bend the sheet metal they are attached to lol. You'd probably have to hold it with one hand and pull it with the other.
Exactly the same thought here 🤣
Pro tip: use museum putty/plasti-tak to attach the metal plate to the wall. Sticks very well and leaves no residue
This is by far the best advertisement and instructional video I have seen in years.
I bought the desk solution and absolutely love it! bought another one for my wife's setup and both look so clean and easy to work with.
Okay. This video was greatly needed for me and a fantastic video. I've had this cable management set since limeday 2024 and now I'm finally making my desk pretty. Power bar key is amazing and I could use these for so many things in my life
After just watching today’s Apple Event… this video gave me the same vibes… clean presentation, smooth voice + explanation, great product demos, showing off extra tricks’n’tips to enhance user experience and you finish with the packaged kits!
So respect to you all at Team LTT for this amazing product design and impressive video showing it off. Apple won’t admit it but if they did they would be proud :P
You are just missing one thing… fancy flying around scene cuts to this segue!
Okay the power bar key legitimately caught my interest
1:13 So beardless Tynan is handsome Shrek?
Tynan looks good shaved/unshaved. Wow he looks like a great cuddler.
Magnets! How do they work?
You're supposed to eat and swallow them.😇
nanomachines son!
its magic I aint gonna explain shit
so basically in every magnet there's lots of very little magnets... how do those work? SHUSH
YEAH BEACH!! MAGNETS!!!
I would love to use theses for client office setups, but can't get behind that price point unless you offer a bulk discount.
Then don't buy it and shut up
@@satl3161 you OK bro? Maybe touch some grass
@@michaelmm94 Dudes going through comments and replying to people with any mild comments LOL
@@ItsSavvo its a moody evening for salty satl
I just did my desk with this solution, and it did a great job. So much cleaner and I can finally vacuum properly underneath.
Great presentation, Tynan! Clear, concise, great job all around.
A use case for these that I've been talking about on my socials is for telescopes. Astrophotography setups using telescopes have to deal with loads of cables and cable snags are a big risk. As telescope tubes are metal, magnetic cable management options is AWESOME!
They already do! They're magnetic zip tie mounts. We used them on ships
YESSS! THE POWER BAR HOLDERS! I've been waiting for those.
I just wish these didn’t end up so expensive. Based on current pricing, I would probably need $300 worth of it to manage my desk
Sucks to be poor
Those are neodymium magnets, these are very expensive, very premium kits that they have put together. Yeah it sucks that these are very expensive but that's the cost of quality
Sucks to want to spend money on other things. They are cool but I did this with a bunch of leftover rare earth magnets for free.
@@MeppyMan I strongly doubt you got those magnets for anywhere close to free
Agreed it's pricey. I'll be getting a couple power brick and power strip organizers, but the rest would be too pricey.
Not cheap, but genuinely top notch solution .. working from home on a sit/stand desk (both gaming PC and work PC hooked up to 4 monitors and tons of peripherals) and these were a godsend.
I genuinely like that you go over some of the uses for these! And some alternative “modes of operation”
I like seeing Tynan at camera 🙌🏻
Originally, I've only seen Linus bring out the arches in LTT videos, and I thought "That's it? two magnets to a plastic injection?"
I changed my mind, I'm really surprised to see this much effort put into these series of product, looks great. Especially the flipping over the thumb tab for various keyhole slot length, thats amazing.
These are impressive! A lot of thought went into ALL the needs for cable management. Thoroughly impressed!
Cool, Tynan headlining. Great job!
I have seen most of those in LTT videos for a while now but the two at the end are new to me.
Last 3 are the ones I am most interested in as well.
Finally, this is the right place to do an ad for ltt, not in the main channel disguised as the doctor setup video
Great idea. Seems like there was a solid amount of thought put into this product. Nice work!
Thanks Tynan for helping develop this awesome thing!
Hold on, Tynan gave me an idea. Tool box organization. Utilizing some of the vertical spaces in deeper doors. 🤔😅😅
THIS is the video that should have been out on launch day for MCM. I don't get why it wasn't out then, but I'm glad its out now.. both to show off the product, and for a little how-to for some of the elements not as intuitive for everyone.
I think I speak for us all, when I say, that we need more stuff with Tynan.
Such a great host!
YES! Finally showing off the full kit in its full glory! This had been sorely lacking.
Something to add: Those keyhole shapes on the power bars? They are NOT LEGAL in some countries (like germany, which I found out after running to the hardware store with the "power bar keys" in hand). So before finding that out I had quite a bit of trouble figuring out how the power bar keys would work, which this video now finally shows in detail. Also, now I now all the ways I can still use them! Thanks Tynan.
I did not know that and research is in my near future to learn more! Thanks for that tidbit of info!
Knowing LTT the magnets are actually going to be good. That's where a lot of the cost is coming from.
Seeing how that one extra large Arch was able to lift 30 lb, That would suggest these are all neodymium magnets and they are ridiculously strong, they probably have this in a product warning but do not put your hand between these magnets and anything metal, especially on the larger cable management arches, these magnets will not bite or pinch. They will amputate whatever part of you is between The magnet and whatever it's attracted to
As an owner of the Desk kit, yes, they are GREAT magnets.
@@ThatBeTheQuestion I would expect nothing less from obsessive control freak Linus
@@the_undead what the hell is wrong with you?
Honestly probably overkill for what they're being used for which explains the absurd price.
I would recommend. I bought these two months ago for my desk set up and I love them!
This might be a silly question but, is there any risk of the magnets to introduce some potential latency/noise/interference to the cables? (Ethernet, HDMI, DP, USB, etc
I'm aware some cables are shielded so that they protected but, I just wanted to know
Since the magnetic field is constant, it won't induce any current. So I don't think it will change any of the signal properties of the cable.
no
@@Kastinuk The field is changing in the gigahertz range for more modern cables. Its 100% going to induce something.
From the testing we did there weren’t any measurable differences for usb, hdmi, nor, DP, we did some qualatative testing on analog cables and didn’t see any changes either.
Most electronics aren’t impacted by high strength static fields though some parts that have or generate their own fields may behave weirdly like motors, inductors, relays etc.
So don't put these right next to the motor of a height adjustable desk?1@@tynanstack8251
Brother I remember you teasing this on wan show years ago!
Glad to see it's finally rolling out right as I began remodeling. I'm definitely buying thi- *sees price*
..I guess ill stick to diy
Great vid, I’ve been hoping for a first party guide to these products! Especially the power extension mount! Thankyou
Don't listen to them Tynan, you look great without the facial hair!
This is a really good product. I will get some when I can afford them! I hope they continue to make these kind of new innovative stuff for lttstore and not just merch
100 pack of the same cable ties(just without LTT logo) and an idk-how-many pack of staples is like 5-10 bucks. A lot cheaper than even one of these kits.
I have the underside of my desk managed like that - I stapled the ties to my desk(wood veneer) and it works a treat.
is it bad that I was waiting so long for these that I just 3D printed some
It is smart. Not bad.
The power bar mount is smart though.
Objectively better considering the margin they are making on these. Strong magnets are cheep nowadays. I wish i had a 3d printer because i bought a set of magnets for like $20 expecting them to be poor quality because there were so many. They ended up being way to strong and now i have a bunch of magnets laying around and could probably make 8-10 archs if i had a 3d printer.
@@littlejack59 bambu lab is having a sale you can get one of the best starter printers in the world the A1 mini for £169 for the next 3 weeks then it gos back up to £229
Shipping and taxes to EU doesn't make it reasonable for me to buy it anyways. So I'll just 3D print this as well...
These look REALLY well thought out. Good stuff yall!
do these hold up a power supply like from inside a desktop tower? I would like to attach an atx psu under the table using these magnets if they are strong enough.
Dang, they even have a sponsor for their product release video. Lol still, I think I'd buy these. Me like magnets :v
Lmao had the same thought
why wouldn't they? Gotta keep the lights on somehow, i would guess most magnet cash goes back into making more
the shaved Tynan jumpscare got me good
Ngl scrubbing through the video I jump scared myself 😂
@tynanstack8251 that's absolutely hilarious 😂💀
Shaved Tynan does not exist ....
Shaved Tynan :
I love this product. It's genuinely so good. Those magnets are some serious high quality stuff
😂😂😂😂😂😂Got a sponsor for a video unboxing their own product. Now THAT is some good business!
Gotta love the quality of the products. More so when compared to other you tuber cash grabs.
In the beginning talking about it being a lot of work to do adjustment and the telling us we need to screw in or permanently adhere the baseplates....
Just use some screw in hooks.
I bought a ton of these already. Spend over a grand on them. I have yet to open the box and put them to use though. I'm sure when I move house, I'll find a reason to take them out. At this point, I kinda have everything in a place (not a great one) where it makes it hard to need a device like this.
It's good to see a normal relatable person on LTT for once.
The power bar gripper is a game changer!
The ad inside the ad is crazy lol
That next level... Have a sponsor for an self promotion video!!! Good job!
Is it me or is there anyone else that’s can’t wait to order this cable management magnets!!!!! Soooo satisfying 😊🥹🤯😜🤭🥰🤤
This shows why these are so good. didnt understand the hype until now.
The power bar key is the most intelligent and amazing invention ever made! THATS PURE GENIUS!!
This reminded me about infomercial channels on TV.
I'm also considering getting some after I finish changing to standing desk.
Was waiting for a video on how some of these worked before buying.
You guys should make something for frequently used cables like USB charging cables. Like a self-winding reel. Something to suck up the excess cable when it's not in use.
Thanks for the infomercial, I'll be buying some of these when I finally move into a house... since my crap is in storage.
What about UK plugs, those have GRIP. Does the powerbar stay stuck?
I tested the one UK power bar I could get my hands on and it worked so I would say it should
@@tynanstack8251 That's awesome! thanks man.
Wow this was an awesome ad! I will certainly look forward to picking up some of these once I decide what I want to do. Haha.
i am happy to hear about the anti sliding technique
Only LTT could find someone who will put an ad on their ad.
The whiplash of him with and with out a beard for the sponsor segment.
That was dry but still very informative. Felt like an old 90's intake video at a big box store. I'm sure as time goes on you'll feel more comfortable in front of the camera.
Shaved Tynan looks like Jim from the office
Should have a link to this video on the sales page, or a QR code on the product. I bought the key hole mounts and had no idea they were so versatile.
Good thing the sponsor is someone we can sell our PC to, so we can afford the magnetic cable arch lol.
I'm convinced. Yeah don't disappoint me Linus. Imma buy that.
Holy cow, we got Wish Linus. I know it's the beard, but at first I was Linus what did you do to your face, then was like it's Tynan! 😆
Tynan de-aged like 5-10 years with that shave!
I’m a baby again :p
You should definitely DEFINITELY do a review of the Flydigi Apex 4.
It's THE best controller out there right now.
I missed a clip of how steong the adhesive on the the Standard Plates plates is and do they leave residue when pulled of (and if yes how easy is it to remove)
Well you can always take a hair dryer be it on low medium or high heat at a certain reasonable distance of say I don't know 8 inches away something around there and heat certain parts of it for a few seconds as you gently pull it off and there's a chance that it evil either will leave no residue or very little residue at all and listen to Chance you can pull off paint if you have one of those desks that has cheap paint on it
I didn't known I needed this in my life.
4:42 - no they are not, at least not for European schuko plugs (personal experience).
The 3d print models of these plus the magnets bout to go crazy
I don't see why I should get this instead of strong doubblesided tape and zip ties. That's what I used and it works great
Edit: I don't doubt the product works and I'm not hating. Just that in my usecase my table is wooden and drilling holes or taping the mounts for the magnes just seems like extra steps. I'd be more understanding if tables generally are magnet compadable but usuallt they're made out of wood. As you mentioned it's streanghts is adding or removing cables fairly easy, but I'd only remove things if I had to move or remake my entire setup and adding cables is easily done by just ziptieing another cable to my current cableruns.
but you make a good point glad to see other perspectives :-)
Zip ties are great until you have to add or remove a cable...
Well, your solution is semi-permanent if not permanent, if you want to switch out one cable or add one it'd be a pain with zip ties and double sided tape. With their magnets its much easier.
the magic part is... you dont have to buy !!!!! wow imagine that
@@EyDavidI don't see how these magnets would be significantly easier than zip-ties or reusable zip-ties.
With magnets you have to hold up the cables, remove the magnet, add new cable, add magnet.
With (reusable) zip-ties you have to hold up the cables, remove the zip tie, add new cable, add zip tie.
Please explain how the first is significantly easier?
And unless your table is magnetic their product is more permament (I consider putting a hole in your table permament).
@@Jehty_ First off you don't have to drill into the table, though I think that doesn't matter. You can use their tape product or use your own double sided tape. Second off I think it's way easier to pick up and place a magnet that to undo and redo a zip tie.
Props to Jawa agreeing to run their ad during an ad
These look great. Kinda steep for what you'd need for a desk setup. Exactly the type of product I got a 3d printer to rip off, I mean copy, I mean reverse engineer
Wow fhe voice of Linus has really changed
Ok, these are actually insane. Will have to get some one day
You know those magnets would actually be really useful for mounting my EDC Glock under my computer desk
That shaved tynan sponsor was a shock like linus shaved.
I wish I had the Power Bar Key when I was hanging lights in my garage...they are all keyed...
The intro text toming was clean af
finally!!! some useful cable management stuff.
I'm watching without sound, but did they test cable data transfer with and without the magnets? I know they had a cable tester for weeding out bad hdmis.
Yup! I tested every compatible cable with our cable tester and noticed no differences in eye diagrams etc before and after. We also did some qualitative testing with analog cables like coax and didn’t “see” any difference though that wasn’t quite as technically robust of a test
Don't worry, Shaved Tynan isn't real, he can't hurt you.