Harbor Freight Bar Clamps Improved - Jigs #4
HTML-код
- Опубликовано: 23 мар 2016
- I improved inexpensive aluminium bar clamps from Harbor Freight using the Paul Sellers method to reduce twisting of the thin aluminium sides. The torsional strength of these clamps is now enhanced. I added pads to the jaws of the clamp to prevent it from marking the wood. These clamps now show a marked improvement in performance.
This is not an endorsement of Harbor Freight. I just found their prices to be more competitive than at other stores.
Here is where you can find more of me…
Instagram: / sighthounds. .
Website: www.sighthound-studio.com/
Facebook: / sighthoundst. .
Twitter: / abhishek_m 
Хобби
Really good video! And I like your bench!
A suggestion. Know your tools. Japanese saws cut on the "pull stroke". I labored watching your attempts at starting cuts on the pull stroke. Start your cuts with a short "push stroke" then pull straight, long and evenly without "forcing" or pressure. ;-)
Great Clamp Update! love the idea!
+Wood By Wright thank you. I failed to mention in the video that the bar clamps are susceptible to twisting. Packing them with wood reduces the twist.
Thanks, very good idea....I have a bunch of vintage pipe clamps but was thinking about these Harbor Freight clamps the other day so good to hear they actually work.
+Kyle Patrick (fenderhead23) The pad on the clamp jaw is alone a good addition on metal clamps.
Nice job.
I like what U did good job
Great tip
Just a tidbit on Pipe clamp is the to use Galvanized pipe does not leave marks. pine 2x2 sliced on the table saw to pretty close measurement
I know this is an old video, but how have they held up over time?
The only thing I would add is changing and out the acorn nuts. Once they come loose they are next to impossible to keep tight. They are metric and nuts with nylon locks are awesome.
I agree. I have lost those nuts a few times and had to go scrambling on my hands and knees to find them. Lock nuts is the proper way to go.
Good tip, if I have any problems with them I'll keep it in mind.
kewl. I always use the 20% off coupons on these. Ima have to try that ply filler. Thanks.
+Jo Jo I never get their coupons but I am going to look for them because I need some longer clamps. Let me know how the filler and pads work for you.
Please add to your notes what the dimensions of the plywood was and what it needs to be. So what is the finished dimensions of the insert.
I have seen these clamps at Harbor Freight and thought about buying them...then decided against it...because of how soft/flimsy they were. I think you've changed my mind. I'm going to go there today and 'upgrade' those clamps. Great idea and great video! You have a new subscriber!
I have those and even without mods they actually work well for woodworking. The screw type "F" clamps are pretty good also as are the wooden screw clamps.
Nice idea. Other than the twisting, have you found the clamps too be satisfactory for use?
+Eric Hess yes absolutely. The clamps seem to apply more definite pressure when tightened. Also, the pads on the vise jaws of the clamp are always a good idea on any kind of clamp. Thank you for watching.
+Sighthound Studio Just picked up two, will give them a try.
+Eric Hess do let me know how it goes.
I personally would go with silicon or rubber pads on the clamps, like I've see in another video. Would prefer the wooden pads not to be glued to the project wood if there's glue squeeze-out. I suppose tape on the pads would prevent this, but meh.
Yeah, those silicone pads are pretty good to have. Some of my pipe clamps have silicone pads. I have not had any problems with glue squeezing out enough to bond to the plywood pad.
Very informative. You're good with video editing too. One constructive criticism that I could give you is you should think out what you're going to say, to avoid saying "uh" every 4-7 words. Can't wait for your next video, subscribed.
Thank you for liking the video, and for the constructive criticism. I have tried to script out what I intend to say and it did not work for me. The speaking felt contrived. I am working on speaking naturally and avoiding mannerisms such as "um".
I have taken a hiatus from youtubing for a little while. I plan to return, but I can't say when that will be. Thanks for watching.
Dude buy a vise
I feel like so much information is lost through the distraction of filler words. Like uh. Constructive criticism is all. Might be something to work on. I enjoy your videos overall
Every time you set your plane down on its base plate, there's a chance of losing its sharpness.
The wood benchtop is too soft to dull the plane. I am careful enough to set the plane down on the benchtop and not on a chisel or square which will dull the sharpness of the plane.
If you're going to make precision buy the proper tools
Paul Sellers ripoff
we are all leaning on giants
If you Read the description of the video, you would see that he gave Paul credit for this modification. This is from the description.
" I improved inexpensive aluminum bar clamps from Harbor Freight using the Paul Sellers method to reduce twisting of the thin aluminum sides.
Don't accuse people of taking credit for things they give credit for.
Learn to read and understand what you read before you accuse people.