You are so inspirating and positive. Thank you for your wonderful videos, I love them and the way you explain and show the steps. Thank you very much for this. Many greetings from Germany to Australia. 😊
A lovely colour pallette. Played around with a painted slab today (Fimo with a sparkle) and it came out fabulously ❤❤❤. Also made a slab with alcohol inks and a gold mica splash - the inks took a long time to dry, but I am very happy with the outcomes. The collection was my best to date (still very new to Polymer clay). Made a pair of hoops and huggies as well - OMW they are so cute. My snakes were a bust but I'll wear them anyway and keep trying with the leftover bits till I get them well done. Love your tutorials 😍. Tomorrow I'll make something with Turquoise clay and Silver Leaf.
I usually get a few uses out of them. I just make sure to squeeze as much resin out as possible. I pull the plunger back and store it tip down - then before it fully cures try to squeeze any remainder out. Usually gets me a few uses!
If I don’t stand before I resin the edges of my resin tend to look a little jagged or not perfectly domed over. I end up sanding and adding more resin. Do you run into this problem?
Try expanding the video on your device (I do so on my phone and it fills the screen). The videos are in portrait so that they can be used across all her social media platforms.
The polymer clay is cured in the oven, but the resin needs to be in a well ventilated area. Resin is a chemical so I wouldn't recommend putting it in the oven.
![[DOKKAN BATTLE] Worldwide Campaign Announcement Video](http://i.ytimg.com/vi/zxfEiMksZQs/mqdefault.jpg)
Thank you for the tips. Thank you for showing your entire process in regular time before speeding up.
You are so inspirating and positive. Thank you for your wonderful videos, I love them and the way you explain and show the steps. Thank you very much for this. Many greetings from Germany to Australia. 😊
Absolutely stunning
Thank you so much!
Wow, another great technique and so simple using paint. Thanks for another great tutorial.
You are so welcome! Thanks for watching!
Another great tutorial!! Love orange, so glad you added it! Very fun, terrific color choice.
Thanks so much 😊 I’m glad I did too.
A lovely colour pallette.
Played around with a painted slab today (Fimo with a sparkle) and it came out fabulously ❤❤❤.
Also made a slab with alcohol inks and a gold mica splash - the inks took a long time to dry, but I am very happy with the outcomes. The collection was my best to date (still very new to Polymer clay).
Made a pair of hoops and huggies as well - OMW they are so cute. My snakes were a bust but I'll wear them anyway and keep trying with the leftover bits till I get them well done.
Love your tutorials 😍. Tomorrow I'll make something with Turquoise clay and Silver Leaf.
Oh gosh it’s sounds like youve been busy! It’s so much fun playing around and experimenting!
Thanks for watching my tutorials!
So, you wait for the paint to dry, before you bake, right? And yes, those are gorgeous; you have a great sense of color!
Yes! it only takes a few minutes to dry - obviously depending on how much paint. but then i cut and bake.
@@TheLittleCraftHouse Lovely work, and thanks for the inspiration!
You’re videos are so helpful. I enjoyed it. Thank you ☺️
You are so welcome! Thanks for watching!
Loved watching this one, thanks for sharing 😊 Hx
Glad you enjoyed it! Thanks for watching!
Beautiful
So pretty!!!💙
Thank you!! 😊
Have you thought of using translucent clay with the paint?? It might look even better and possibly like stained glass! ❤
Yes! I've done it before! It looks fantastic! I'll have to do it again and film it! Thanks for the suggestion!
So great! Is your syringe with resin a one time use item? Is it trashed after use or cleaned?
I usually get a few uses out of them. I just make sure to squeeze as much resin out as possible. I pull the plunger back and store it tip down - then before it fully cures try to squeeze any remainder out. Usually gets me a few uses!
Very nice 😊. I have a question. Why don’t you use UV resin?
Its just a personal choice - but I've had issues with it setting as I use it, I don't like the smell, and I get better value out of epoxy resin.
If I don’t stand before I resin the edges of my resin tend to look a little jagged or not perfectly domed over. I end up sanding and adding more resin. Do you run into this problem?
please make the video in landscape mode because not able to watch as portait
Try expanding the video on your device (I do so on my phone and it fills the screen).
The videos are in portrait so that they can be used across all her social media platforms.
Very beautiful. Thank you for sharing. Question: what is the name of the oven you use?
Thank you for watching! It’s a Sunbeam Bench top oven. I talk about it in detail in this FAQ-
ruclips.net/video/PzqyvLmLbrQ/видео.html
So pretty! Can I dry in oven instead of drying outside?
The polymer clay is cured in the oven, but the resin needs to be in a well ventilated area. Resin is a chemical so I wouldn't recommend putting it in the oven.
Which oven did you used
And what was the temperature of oven at that time
How long it takes to get ready or cooked
You should find all those answers in my FAQ tutorial-
ruclips.net/video/PzqyvLmLbrQ/видео.html
I like the syringe idea makes me wish i had access to extra syringes in the hospital. Those were free!!
I like the control you have with them.
And If you can get them for free that would make them even better!!
❤They came out Super Cute! Do you have a TT?
Thanks so much! I do- but I use Insta more! I’ve been a bit slack on TT! My social media handles are @thelittlecrafthouseaus
Very beautiful ❤mam
Thank you
Is anyone else having trouble hearing the audio?
No
No
Use the visuals and appreciate that she is sharing her skills with you…..
Don't be rude. I asked a question. @@maxsam1537