Hello friend, the sensor on the left side of the engine does not click, the harness is broken, the plastic is broken, the engine turned on the engine light and it only accelerated at more than 2 thousand revolutions. Do you think that sensor or the harness is the reason for the problem? It accelerates only in parking mode and the revolutions are always above 1000 rpm and I feel the transmission knocking when it engages gear and reverse. Please let me know. Thank you very much.🙏🙏
it can cause many but some would be rough idle, poor fuel economy, eventually the engine may not start if the sensor is completely not working. you will get a check engine light code for a bad cam sensor
Great job I'm learning you cheating well I will continue to learn more from you ❤❤❤❤❤❤
You are helping me with my Camry thank you very much keep it up!!!
Thank you!!! You are very helpful
The 3rd Crankshaft position sensor is just behind the engine starter. Had to remove it from below, before I could remove that last one.
Hello friend, the sensor on the left side of the engine does not click, the harness is broken, the plastic is broken, the engine turned on the engine light and it only accelerated at more than 2 thousand revolutions. Do you think that sensor or the harness is the reason for the problem? It accelerates only in parking mode and the revolutions are always above 1000 rpm and I feel the transmission knocking when it engages gear and reverse. Please let me know. Thank you very much.🙏🙏
Does a faulty one give code p0335 code?
I believe that's for the crankshaft position sensor
does the intake and exhaust use the same sensors, or are they different?
they're different, the exhaust uses oxygen sensors and the intake system has maf and map sensors
What issue does this sensor causes ?
it can cause many but some would be rough idle, poor fuel economy, eventually the engine may not start if the sensor is completely not working. you will get a check engine light code for a bad cam sensor
If these sensors are faulty would they show up on the obd2 scanner?
And do these sensors beings falty cause misfires?