U760E Rebuild

2012 Toyota Camry
PATREON: / curmudgeontransmission
Supplier Links:
Superior: superiortransm...
Transtar: www.transtar1....
WIT: www.wittrans.com/
Sonnax: www.sonnax.com/
Teckpak/Fitzall: www.teckpak-fi...
Transgo: transgo.com/
Precision of New Hampton: gopnh.com/
Atec Transtool: www.toolsource...

[@markvietti]

this channel is gold just nobody knows about it

[@CurmudgeonTransmission]

Thanks.

[@hectorcastro8136]

What is the brand of this rebuild kit?

[@ScheulenSlayer]

you have your steels stack up upside down on the c2 clutch pack. thick goes first then thin on top

[@CurmudgeonTransmission]

You are correct. If you had continued watching you would have seen that is what I ended up doing.

[@hadisafari2898]

خیلی مرد شریفی هستین و در کار خوت خیلی هم استاد بی نظیری هستی آرزوی سلامتی و موفقیت دارم برای شما👍🙏🌹

[@CurmudgeonTransmission]

Thank you. You as well.

[@mikek.9980]

Thanks for a great video! I have two questions, how many miles on this Camry and what were the symptoms. Additionally, how reliable are these Sonnax kits? Thanks, Mike.

[@CurmudgeonTransmission]

Man, I don't remember how many miles were on it. These trannies have 2 big problem areas. One is the bearing that sits on top of the transfer gear under the pump. Likes to come apart and does a fair amount of damage when it does. The other big problem area is the valve body. How much damage is done is determined by how long it is driven afterwards. Symptoms include harsh shifts, up and down. Slips, flairs, probably some others that are not coming to mind right now. There are usually codes stored in the system as well. hope this helps. Thanks for watching.

[@rvptwobee]

great video , big help on my first unit

[@CurmudgeonTransmission]

Glad I could help

[@ksa2239]

Thank you for this content and to contact I have a problem with the carrier u660e Avalon when the carrier is cold everything works smoothly but when it heats up it goes smooth and gets delayed in D I checked and an error P2714 and p0796 appeared. They told me that the internal piston is leaking oil and the pressure is low now I get a vibration when it heats up also when starting the oil and the filter is new also please help me.

[@CurmudgeonTransmission]

Usually those codes are because of the pistons. They should be replaced on every build.

[@jameschinonso2330]

hello Tom, that was a fantastic piece of work there, just a quick one please, that small little hole u drilled and blocked, please my question is why did you block it and before it was blocked what was the function of the little hole. thanks.

[@CurmudgeonTransmission]

Thanks. Solenoid modulator balance. Only for when you install the Sonnax kit.

[@jameschinonso2330]

@@CurmudgeonTransmission God Bless you sir

[@ahmedkhalaf1003]

Hi Mike, thank you for this video. Question; where did you buy the rubber seals and friction packs? Thank you!

[@CurmudgeonTransmission]

WIT or Transtar, links in the description.

[@bobrogie]

Is there anyway to know which one is solenoid B on the valve body? Any position?

[@CurmudgeonTransmission]

PCS-B also known as SL2 is a large canister solenoid, closest to the small canister solenoids by the manual valve.

[@jesusfidel121]

I have no pressure in the transmission before a transmission cooler issues, can get the fuel pump anywhere? I think that it could be the problem, what do you think?

[@CurmudgeonTransmission]

A bad pump is one reason for no pressure.

[@MdAzim-g5b]

Thanks a lot

[@CurmudgeonTransmission]

Most welcome

[@joebass5163]

Too much magic for me lol awesome video

[@CurmudgeonTransmission]

Glad you enjoyed it.

[@phuchuynhthanh3280]

Ok good😊

[@CurmudgeonTransmission]

Thanks

[@ahmadabubakar3830]

Please how to get this seal

[@CurmudgeonTransmission]

Which seal? If you want the whole rebuild kit, WIT or Transtar. Links are in the description.