Rubber or silicone 4mm inner diameter vacuum hose www.amazon.com/High-Performance-Silicone-Vacuum-Hose/dp/B008N0VNXC?th=1 . As for a hose connector, I used one from car vacuum hose connector kit www.amazon.com/Vacuum-Connector-Assortment-Automotive-Tubing/dp/B09NPTQ68H/ref=sr_1_3?keywords=vacuum+line+connectors&qid=1667686577&sr=8-3 .
Regarding the Exhaust Flap: couldn't you essentially achieve the same goal by grinding off the welds on the flap plate (1:27) allowing its removal leaving only the shaft?
Thank you. Yes, you can buy them separately. Here are the links: The Servo Buddy www.revzilla.com/motorcycle/servo-buddy-bmw-2010-2017?sku_id=1185159 , Butterfly Valve Eliminator www.revzilla.com/motorcycle/remus-butterfly-valve-eliminator-bmw-r-nine-t-2014-2020?sku_id=10181198 . You could do me a big favor and leave a thumbs up under the video 👍
You'll get peace of mind that none of these crap will ever fail and destroy your engine or fuel system. True story, exhaust flap failure in the closed position without any warning light on the dashboard on my friend's bike, caused the headers to get VERY hot (glowing white) and engine over heat. After that his bike never work like before. Without the exhaust flap your exhaust will sound a little bit louder.
Charcoal canister's job is to absorb fuel vapor that would otherwise vent out to the atmosphere. I expect that in 2030 it will not even be possible to open the fuel tank yourself. 🤔😏
This was Truly FANTASTIC, AWESOME. But my question is, WHAT is/was the POINT Please ??? - I assume the bike 'runs/performs' better, is this correct?? Anything else PLEASE ? Was it 'worth it'? (I am VERY SERIOUSLY considering purchasing one) Thank You and regards. ('OZ' Australia)
I have a friend who traveled 20 miles with the butterfly valve stuck in close position, no dash warning light. The exhaust manifold was red hot and the bike never performed as before. This was mine main reason. I just don't trust this thing. The benefit is a bit louder exhaust and peace of mind. As for the charcoal canister, it's another euro 4,5,6,or 7... stupid regulations ,adding pointless filters to our beautiful motorcycles. Thank You and don't forget to 👍
As I mentioned earlier in the comment. "I have a friend who traveled 20 miles with the butterfly valve stuck in close position, no dash warning light. The exhaust manifold was red hot and the bike never performed as before. This was mine main reason. I just don't trust this thing. The benefit is a bit louder exhaust and peace of mind. As for the charcoal canister, it's another euro 4,5,6,or 7... stupid regulations ,adding pointless filters to our beautiful motorcycles. Thank You and don't forget to 👍"
Great video congrats...but may i ask you what are the real benefits that i will obtain removing those 2 things and spend approximately 100 euro for the Servo Buddy and 50 euros approximately for the exhaust adaptor?
You'll get peace of mind that none of these crap will ever fail and destroy your engine or fuel system. True story, exhaust flap failure in the closed position without any warning light on the dashboard on my friend's bike, causing the headers to get VERY hot (glowing white) and engine over heat. After that his bike never work like before. Of course, it's a one in a million chance that this will happen, but knowing my luck I don't want to risk it. 😁
@@gamotur may i ask you also why is so important to cover as you suggest with a rubber cap the small opening on the left cilinder when you remove the charcoal tube?
@@cristoforopontikas That's where cylinder sucks the fumes from charcoal canister. After removing the canister you HAVE TO plug this hole. Otherwise your engine will run uneven sucking the dirty air.
Thanks Gamotur, For another exemplary video. I look forward to following your lead. Are you able to recommend the substitute parts? Keep them coming...
Thank you. If you want to save some money you don't need to buy Servo Buddy, just don't disconnect the electric wires of the original SERVO UNIT. Instead, disconnect the exhaust flap from the Servo Unit (two metal cables). Don't forget to 👍
The golden stands you see in this video are Pit Bull Motorcycle Stands. Front stand is universal and rear is bike specific for single sided swingarm ( with BMW attachment ). The blue stands I used in my other video ( ruclips.net/video/YKOCtgDBjjI/видео.html ) in the center of the bike are regular car Jack Stands. Too bad R nineT have no center stand. Thank you for comment and don't forget to 👍
Just got an '18 Urban GS. The previous owner has removed the charcoal canister but left the original servo unit on the exhaust - not sure if he had removed the flap itself. What do these mods accomplish? Any info or link is appreciated!
You'll get peace of mind that none of these crap will ever fail and destroy your engine or fuel system. True story, exhaust flap failure in the closed position without any warning light on the dashboard on my friend's bike, caused the headers to get VERY hot (glowing white) and engine over heat. After that his bike never work like before. Without the exhaust flap your exhaust will sound a little bit louder.
Here are the links: The Servo Buddy www.revzilla.com/motorcycle/servo-buddy-bmw-2010-2017?sku_id=1185159 , Butterfly Valve Eliminator www.revzilla.com/motorcycle/remus-butterfly-valve-eliminator-bmw-r-nine-t-2014-2020?sku_id=10181198 . You could do me a big favor and leave a thumbs up under the video
Has anyone ever measured the actual gains/improvements/bennifits the bike? (actual test results...not just "i believe" BS). There is more $$ gone into researching these bikes on so many levels....just "thinking" it makes it better....probably does not.
Almost three weeks and so far no error code. I no longer have to worry that the "flap" will get stuck in the closed position. Plus it sounds better, and I think the engine temperature is lower. I'm still testing. Thank you for the kind words it means a lot to me. 👍
Nothing really. Some say that your fuel system gets dirty. I just don’t like anything that I don’t need to run the engine. This is just another thing that “smart” people adding to the engine by law to lower the carbon footprint.
Hello, thanks for the video. In the canister step, could you indicate where the materials can be purchased? the plug, and the connecting tubes as well as the main tube? Thank you very much.
Hi. The rubber throttle body plug I order from BMW dealer (same as the other side plug) or you can buy it at any automotive store as a vacuum tube/line plug. As for a hose ,any rubber or silicone 4mm inner diameter vacuum hose will do www.amazon.com/High-Performance-Silicone-Vacuum-Hose/dp/B008N0VNXC?th=1 Good luck Buddy and don't forget to 👍👍
Gonna have to say this is probably one of the best videos I’ve seen so far. Only have one question, What about the small tube you used to connect both hoses, what size would that be? Thanks
@@texasaviator Hose size is 4mm inner diameter ,so get any tube 1mm smaller to fit inside. I used one from car vacuum hose connector kit. www.amazon.com/Vacuum-Connector-Assortment-Automotive-Tubing/dp/B09NPTQ68H/ref=sr_1_3?keywords=vacuum+line+connectors&qid=1667686577&sr=8-3 . Thank you! Hit the Like button 👍
pourquoi....mais pourquoi enlever la valve à l échappement ?vous les bricoleurs du dimanche vous avez un niveau technique supérieur aux ingénieurs de chez BMW ? un moteur 4 temps à haut rendement ne marchera jamais si bien que quand la nasse gazeuse d'échappement à des " freinages" bien pplacés par rapport aux régimes moteur....la vanne motorisée est la pour ca ! couple idéal àtout les régimes = maxi performances faites des essais chronometre en mains avec les deux options et passez nous les ré sultats ...merci...bonne roure !
arretez ce massacre.....😂😂 vous pouvez aussi couper la boucle arriere du cadre 😂😂 et enle ver le si lencieux d'origine par un " gadget" tres bruyant qui vous donnera l'impression d'aller tres vite...😂😂😂
![NLE Choppa - Or What ft. 41 (Orchestra Mix) [Official Music Video]](http://i.ytimg.com/vi/biOFASEgSOM/mqdefault.jpg)
Thank you for your video's many qualities. Number one... no annoying music. Bravo and cheers.
Hard to beat the Marc Parnes balancer. Looks good
Should have removed the charcoal cannister holder as well! Great clarity on step by step. thx!!
That nail was from another planet. .. that said Ive seen videos where such issue was fixed with double bended rubbet tubing.. ah well... great bike
Thanks, Subscribed! It would have been nice to hear the exhaust note after the flap delete.
Thanks!!! ruclips.net/video/MoixD0Pghh8/видео.html
Nice job thanks you from France 👍
Thanks for that wonderfull video! Can I ask you what engine bar are this?
Thanks. Engine crash bars: ruclips.net/video/Ivu4mx_jx5w/видео.html
That was a very good video, thank you.
This was excellent.
great vid! where can I get the hose and hose joiner? and also the breather blank?
Rubber or silicone 4mm inner diameter vacuum hose www.amazon.com/High-Performance-Silicone-Vacuum-Hose/dp/B008N0VNXC?th=1 . As for a hose connector, I used one from car vacuum hose connector kit www.amazon.com/Vacuum-Connector-Assortment-Automotive-Tubing/dp/B09NPTQ68H/ref=sr_1_3?keywords=vacuum+line+connectors&qid=1667686577&sr=8-3 .
😲....bike service and wheel balancing!😌🤤🤌 Why do I love it so much! Thx for this. Such a zen little vid!
Regarding the Exhaust Flap: couldn't you essentially achieve the same goal by grinding off the welds on the flap plate (1:27) allowing its removal leaving only the shaft?
Perhaps 🤔. I just didn't want this extra things on my bike.
Thank you for the video. Where did you find the mid-link exhaust coupler kit with the Servo Buddy? Can I buy the coupler without the Servo Buddy?
Thank you. Yes, you can buy them separately. Here are the links: The Servo Buddy www.revzilla.com/motorcycle/servo-buddy-bmw-2010-2017?sku_id=1185159 , Butterfly Valve Eliminator www.revzilla.com/motorcycle/remus-butterfly-valve-eliminator-bmw-r-nine-t-2014-2020?sku_id=10181198 . You could do me a big favor and leave a thumbs up under the video 👍
What is the point of removing the exhaust flap? I thought these devices helped with low end torque. Thanks and cool video!
You'll get peace of mind that none of these crap will ever fail and destroy your engine or fuel system. True story, exhaust flap failure in the closed position without any warning light on the dashboard on my friend's bike, caused the headers to get VERY hot (glowing white) and engine over heat. After that his bike never work like before. Without the exhaust flap your exhaust will sound a little bit louder.
Use the charcoal canister to hide a GPS tracker ;-)
We think the same way 🙂
there is really no need to extend the vent, just tuck it under the airbox somewhere
is there a part number or size for the protection cap used when removing the charcoal canister?
Part number: 13 54 7 694 924
Why charcoal filter? It doesn't prevent bad fuel to go in the combustion chamber?
Charcoal canister's job is to absorb fuel vapor that would otherwise vent out to the atmosphere.
I expect that in 2030 it will not even be possible to open the fuel tank yourself. 🤔😏
@@gamotur sorry i thought it was a filter. Im discovering the "bike word" now
This was Truly FANTASTIC, AWESOME.
But my question is, WHAT is/was the POINT Please ???
- I assume the bike 'runs/performs' better, is this correct?? Anything else PLEASE ? Was it 'worth it'?
(I am VERY SERIOUSLY considering purchasing one)
Thank You and regards.
('OZ' Australia)
I have a friend who traveled 20 miles with the butterfly valve stuck in close position, no dash warning light. The exhaust manifold was red hot and the bike never performed as before. This was mine main reason. I just don't trust this thing. The benefit is a bit louder exhaust and peace of mind. As for the charcoal canister, it's another euro 4,5,6,or 7... stupid regulations ,adding pointless filters to our beautiful motorcycles.
Thank You and don't forget to 👍
@@gamotur
THANK YOU SO VERY MUCH Sir. GREATLY APPRECIATED.
(now I know !!!)
- And of course I 'liked' !!
Hav a gd 1.
Thanks again.
I enjoyed your film and workmanship but explanation as to why you removed the parts would have been beneficial thanks anyway
As I mentioned earlier in the comment. "I have a friend who traveled 20 miles with the butterfly valve stuck in close position, no dash warning light. The exhaust manifold was red hot and the bike never performed as before. This was mine main reason. I just don't trust this thing. The benefit is a bit louder exhaust and peace of mind. As for the charcoal canister, it's another euro 4,5,6,or 7... stupid regulations ,adding pointless filters to our beautiful motorcycles.
Thank You and don't forget to 👍"
Great video congrats...but may i ask you what are the real benefits that i will obtain removing those 2 things and spend approximately 100 euro for the Servo Buddy and 50 euros approximately for the exhaust adaptor?
You'll get peace of mind that none of these crap will ever fail and destroy your engine or fuel system. True story, exhaust flap failure in the closed position without any warning light on the dashboard on my friend's bike, causing the headers to get VERY hot (glowing white) and engine over heat. After that his bike never work like before. Of course, it's a one in a million chance that this will happen, but knowing my luck I don't want to risk it. 😁
@@gamotur may i ask you also why is so important to cover as you suggest with a rubber cap the small opening on the left cilinder when you remove the charcoal tube?
@@cristoforopontikas That's where cylinder sucks the fumes from charcoal canister. After removing the canister you HAVE TO plug this hole. Otherwise your engine will run uneven sucking the dirty air.
The 28Nm where did you get this value? Because in another video i see that are using 20Nm to tight the bolts. Is there any official value? Thanks
@@cristoforopontikas "Silencer and downpipe clamp bolts: 28Nm". Service&Repair Manual
Are the annakee tires quieter than the karoo 3’s? Thanks for the videos of your r nine t.
Let me put it this way, Michelin Anakee Adventure feels like slick tires compared to Karoo 3. Much more stable (on the road) and quiet.
Was hard to remove the old tire and put a new one? Great videos, thank you!
I did it with the tire machine at my friend’s shop :) Thanks
Thanks Gamotur,
For another exemplary video. I look forward to following your lead. Are you able to recommend the substitute parts?
Keep them coming...
Thank you. If you want to save some money you don't need to buy Servo Buddy, just don't disconnect the electric wires of the original SERVO UNIT. Instead, disconnect the exhaust flap from the Servo Unit (two metal cables). Don't forget to 👍
The wheel balancer adapters, what source?
www.marcparnes.com/BMW_Motorcycle_Wheel_Balancer.htm
I have just ordered a new Urban GS. Can you advise if those over centre bike lifts you are using are specific to the R9T and who makes them. Thanks.
The golden stands you see in this video are Pit Bull Motorcycle Stands. Front stand is universal and rear is bike specific for single sided swingarm ( with BMW attachment ). The blue stands I used in my other video ( ruclips.net/video/YKOCtgDBjjI/видео.html ) in the center of the bike are regular car Jack Stands. Too bad R nineT have no center stand. Thank you for comment and don't forget to 👍
@@gamotur Thanks Gamotur. Keep up the great vids.
Great video! What year is your bike? I have an 2021....
2018. Thank You!
What did you do the little disk thing under the plastic cover at 10:15. Did you just leave it open ended when you removed the hose?
Yes ,leave the "disk thing" 😉( BREATHER VALVE ) only connected to electric wire. Otherwise you will have the engine light on the dashboard.
Greetings,
Do you cap off the breather valve where the two rubber hoses come off?
I read where you said leave the electrical connection attached.
Just got an '18 Urban GS. The previous owner has removed the charcoal canister but left the original servo unit on the exhaust - not sure if he had removed the flap itself. What do these mods accomplish? Any info or link is appreciated!
You'll get peace of mind that none of these crap will ever fail and destroy your engine or fuel system. True story, exhaust flap failure in the closed position without any warning light on the dashboard on my friend's bike, caused the headers to get VERY hot (glowing white) and engine over heat. After that his bike never work like before. Without the exhaust flap your exhaust will sound a little bit louder.
Thanks @gamotur!
Can I ask what connector pipe and servo buddy that is? Link 🙏👍
Here are the links: The Servo Buddy www.revzilla.com/motorcycle/servo-buddy-bmw-2010-2017?sku_id=1185159 , Butterfly Valve Eliminator www.revzilla.com/motorcycle/remus-butterfly-valve-eliminator-bmw-r-nine-t-2014-2020?sku_id=10181198 . You could do me a big favor and leave a thumbs up under the video
Did you use the charcoal cannister mount for a tool kit holder?
Not yet 😀
Has anyone ever measured the actual gains/improvements/bennifits the bike? (actual test results...not just "i believe" BS). There is more $$ gone into researching these bikes on so many levels....just "thinking" it makes it better....probably does not.
strange on 2023 model don't see that canisrter in that place.
Cant wait to remove my flapper + canister in a year.. Why did you not remove the canister metal part btw?
I was thinking to do some kind of emergency toolroll in there
Finally what's for??
For peace of mind. I really don’t think we need this crap on are motorcycles. It’s all for climate change politics and regulations.
Best non voice how to- period. With the servo buddy, any warning lights? Are you satisfied? Cheers:)
Almost three weeks and so far no error code. I no longer have to worry that the "flap" will get stuck in the closed position. Plus it sounds better, and I think the engine temperature is lower. I'm still testing. Thank you for the kind words it means a lot to me. 👍
What happen if i dont remove my charcoal canister ?
Nothing really. Some say that your fuel system gets dirty. I just don’t like anything that I don’t need to run the engine. This is just another thing that “smart” people adding to the engine by law to lower the carbon footprint.
Top thanks
🔥🔥🔥🔥🔥🔥🔥
Super video 👍😁
EXCELLENT!
Hello, thanks for the video.
In the canister step, could you indicate where the materials can be purchased? the plug, and the connecting tubes as well as the main tube?
Thank you very much.
Hi. The rubber throttle body plug I order from BMW dealer (same as the other side plug) or you can buy it at any automotive store as a vacuum tube/line plug. As for a hose ,any rubber or silicone 4mm inner diameter vacuum hose will do www.amazon.com/High-Performance-Silicone-Vacuum-Hose/dp/B008N0VNXC?th=1 Good luck Buddy and don't forget to 👍👍
Gonna have to say this is probably one of the best videos I’ve seen so far. Only have one question, What about the small tube you used to connect both hoses, what size would that be? Thanks
@@texasaviator Hose size is 4mm inner diameter ,so get any tube 1mm smaller to fit inside. I used one from car vacuum hose connector kit. www.amazon.com/Vacuum-Connector-Assortment-Automotive-Tubing/dp/B09NPTQ68H/ref=sr_1_3?keywords=vacuum+line+connectors&qid=1667686577&sr=8-3 . Thank you! Hit the Like button 👍
Can I ask the pipe capping is it both sides or just one?
Thank you!!!!!
😂😂😂😂quand je vois la marque d'usure sur le coté du pneu....😂😂vous devez etre tres rapide en virages...😂😂😂
What? No start up for us the hear the flap-less exhaust.
Sorry. I didn't want to piss off my neighbors :)
its not that much of a difference
sur une moto allemande: des metzeler...et rien d'autre....😂
pourquoi....mais pourquoi enlever la valve à l échappement ?vous les bricoleurs du dimanche vous avez un niveau technique supérieur aux ingénieurs de chez BMW ? un moteur 4 temps à haut rendement ne marchera jamais si bien que quand la nasse gazeuse d'échappement à des " freinages" bien pplacés par rapport aux régimes moteur....la vanne motorisée est la pour ca ! couple idéal àtout les régimes = maxi performances faites des essais chronometre en mains avec les deux options et passez nous les ré sultats ...merci...bonne roure !
Sound??? 😳😥🙁
Sorry. I didn't want to piss off my neighbors :)
arretez ce massacre.....😂😂 vous pouvez aussi couper la boucle arriere du cadre 😂😂 et enle ver le si lencieux d'origine par un " gadget" tres bruyant qui vous donnera l'impression d'aller tres vite...😂😂😂