Thank you John Angel for everything. I should receive my ONYX hopefully later this summer and I will be reaching out to you all for help and knowledge. Thank you again. Looking forward to my ONXY.
@@f4jsh it all depends on your credit history. I didn’t have to put any money down. But I believe you do have that option of a down payment and finance the rest.
Hey John - what about a headlight tutorial? My daytime running light only works half the time (when bars are straight or pointing left). They turn off when pointed right. Onyx is blowing me off and is not helping me
John, would you have a link to a write up or video on how to properly relocate the controller to the outside? I've looked on the FB forums bit not seeing anything detailed.
Hey john, if I mount the kelly controller outside my bike, what kind of extenders do I need to make the cables long enough? Do you have a link? Thanks in advance
Monday I will post on my blog the links to the cable you’ll need to extend the positive and negative wire of the Kelly controller. You’ll need to extend those two cables by 5 inches to reach the terminals. My blog is johnangel.nyc and the blog post is “Onyx RCR Links”.
is your bike registered? I'm from long island, and really thinking about getting one. I hope i don't get so much trouble, especially because i'm a nurse. they give us a break often times.
It’s a Class 3 ebike in New York State and New York City. I don’t know how Nassau County or Suffolk County treats the Onyx RCR. It is at their discretion to classify it as they see fit. I would hire an attorney for a solid answer. I believe there are a few guys in Nassau County with the Onyx RCR and I have not heard of any problems. You’re welcome to learn more about the state bill, and federal laws by finding that information on my blog post johnangel.nyc/posts/onyx-rcr-start-here/
The Sicko mode blog post mentions removing the fuse completely. As in replace the entire battery connector cable from the stock 8 awg wire and SB50 connector to 6 awg copper stranded wire and QS8 connector. Alvin at DATSHOP has the the complete kit instagram.com/datshopnyc
Hello, great info. Wondering if you can help me. I just got the 41Ah battery and now the bike constantly loses power almost in every ride. I can only consistently ride it on sports mode where I've noticed the bike does not go limp. Not a heat issue cause this happens as soon as in take it out the house even from a normal temperature. I've contacted onyx and told me to switch some cables to "hard reset" the bike but still the issue persists. What could it be? I'm at the verge of asking for a refund. I've put the old 23Ah battery back on and had zero issues. Thank you
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
“Respect the rules of the road”
Hits 50+ mph 😂😂😂 gotta love John
Thanks bro 💯
@@JohnAngelnyc NOBODY TALKS ABOUT THE CTY2 IS IT GOOD?
@@BOOSTEDLASERright now i bet its awesome. Amazing sell. I just couldnt pass the rcr up
Thank you John Angel for everything. I should receive my ONYX hopefully later this summer and I will be reaching out to you all for help and knowledge. Thank you again. Looking forward to my ONXY.
Did you pay the full payment or are you doing monthly?
@@f4jsh what’s up? I have it set up for monthly. How about you. Do you already have your Onyx?
@@angelagosto2911 No, I am planning on financing one~ How much did you have to down pay and whats your monthly if I may ask?
@@f4jsh it all depends on your credit history. I didn’t have to put any money down. But I believe you do have that option of a down payment and finance the rest.
@@angelagosto2911 Nice! Thank you for the kind feedback bro~
thank you John
may i ask whats the name of the fog lights?
My old hood near Grant's Tomb.
Yes
Great riding in the rain advice 👍🏾
Thanks
nice video John!
Thank you
Where can I get that license plate mount?
You can find it at johnangel.nyc/Onyx-RCR-Stuff.html
Hey John - what about a headlight tutorial? My daytime running light only works half the time (when bars are straight or pointing left). They turn off when pointed right. Onyx is blowing me off and is not helping me
That would be a great tutorial but I’m the meantime make a post at “Onyx AF” Facebook group to get help facebook.com/groups/onyxaf/
Great info. Thanks.
You’re welcome
Are there any states ONYX ships to where they disable the normal and sport mode? I’m in Denver
Dope Vid! Very informative, keep it up!
Thank you
Where do you get a 100amp battery 🔋
Thank you for such a great video explaining about the charging port thing :)
Mine fell off day 1
So did mine, but it was still connected to their cable...I glued it the next day.
Great, useful and informative video, I am looking into assisted pedal electric bikes
Thanks
John, would you have a link to a write up or video on how to properly relocate the controller to the outside? I've looked on the FB forums bit not seeing anything detailed.
I’ll make a blog post on in in the next few days and post it at johnangel.nyc
Top speed? 🤩🤩🤩
Wait can I add aftermarket batteries with better range?
Yes, you can add aftermarket batteries with higher specs.
Do you know what kind of sensors are in the motor hub?
I'm having trouble with the motor!
Hey john, if I mount the kelly controller outside my bike, what kind of extenders do I need to make the cables long enough? Do you have a link? Thanks in advance
Monday I will post on my blog the links to the cable you’ll need to extend the positive and negative wire of the Kelly controller. You’ll need to extend those two cables by 5 inches to reach the terminals. My blog is johnangel.nyc and the blog post is “Onyx RCR Links”.
is your bike registered? I'm from long island, and really thinking about getting one. I hope i don't get so much trouble, especially because i'm a nurse. they give us a break often times.
It’s a Class 3 ebike in New York State and New York City. I don’t know how Nassau County or Suffolk County treats the Onyx RCR. It is at their discretion to classify it as they see fit. I would hire an attorney for a solid answer. I believe there are a few guys in Nassau County with the Onyx RCR and I have not heard of any problems. You’re welcome to learn more about the state bill, and federal laws by finding that information on my blog post johnangel.nyc/posts/onyx-rcr-start-here/
Go with sabvoton, it’s not perfect but it’s better than anything else on the market
Peace John! Where or how can Eye get that front and rear fender setup?
I’ve got it listed at johnangel.nyc/posts/onyx-rcr-links/
Hello John, I just did the sicko mode upgrade and I blew a fuse almost instantly at 80%
What did I do wrong?
The Sicko mode blog post mentions removing the fuse completely. As in replace the entire battery connector cable from the stock 8 awg wire and SB50 connector to 6 awg copper stranded wire and QS8 connector. Alvin at DATSHOP has the the complete kit instagram.com/datshopnyc
Read the entire post regardless of what you choose to do johnangel.nyc/posts/onyx-sicko-mode/
hey john, does the statorade/hub sink kit work for the CTY2?
Hello, great info. Wondering if you can help me. I just got the 41Ah battery and now the bike constantly loses power almost in every ride. I can only consistently ride it on sports mode where I've noticed the bike does not go limp. Not a heat issue cause this happens as soon as in take it out the house even from a normal temperature. I've contacted onyx and told me to switch some cables to "hard reset" the bike but still the issue persists. What could it be? I'm at the verge of asking for a refund. I've put the old 23Ah battery back on and had zero issues.
Thank you
I’ll be glad to help. Contact me on Instagram at johnangelnyc
Does the top speed increase on sicko mode if so what speed can I expect 165 lb rider
What type of cable do I need to relocate the controller to the exterior?
I used “6 AWG oxygen free copper cable” to extend the positive and negative leads from the controller by 3 inches each.
@@JohnAngelnyc Is there a plug and play harness ready made available for installation?
I believe Alvin is working on one. You can contact him at instagram.com/datshopnyc
Hey John, what causes the Limp Mode to trigger on a stock onyx? Is it after ir hits a specific temp?
That is correct. As it begins to overheat, it will protect itself and lower its power output.
noice
Thanks
Stick with kelly controllers,Sabvoton aren't the sharpest knives in the drawer!
I noticed the Kelly hits harder for torque which is great. Thanks for the tip.
A sqeeky bike is never enjoyable.. u need to fix that
where did you get a 100 Ah battery 🔋