Yo, thumbs down guy, don't hide behind the screen, if you want to challenge the NitroGang then come and do it. Respond and be a man, I challenge you, in fact I'll even do a a live debate/discussion of your thumbs down points if you want.
We stand behind The Boss Of The Nitro Gang so go and stick that thumb in dark places!!! Haters always going to hate!!! Hay Boss Of The Nitro Gang. Take those thumbs down as a compliment and the fact that you are doing something right that someone can't take!!! Bows to the Boss Of The Nitro Gang!!!
Well you definitely got your work cut out for you but it’s work you enjoy. Also nice of you to help a friend out. How can anyone give you a thumbs down. I don’t understand. Jeff gets them too.
Hey brother just so you're aware don't put that engine in the oven it does have plastic caged bearings and if it is heated to much they can melt and cause a lot of grief awesome video keep up the good work!!
hey bro! Yes, you're 100 right! I have since decided to use a heat gun, it's just easier, and I think it'll be fine. BTW, welcome to the 1/5 Gas Gang!! I'm bout to go watch your new vids.
Perfect timing, just switched the lower chassis plate on my ultimate 3.3 rustler. After a run in with a car tire one of my rear arms ripped out of the chassis. Anyway, completely custom. Every aluminum upgrade available, ported 3.3 with Davis Diesel rod, no expense spared. Not bragging, this was my dream build after getting my first hobby grade rc which was a Nitro Rustler. Awesome job man! #nitrogang
ahhahaaha,, TOTALLY!!! NITROGANG!! I don't think anybody appreciated the funny NYPD is racist humor in this video, it wasn't me saying it, it was the giant bike riding crowd in an very affluent area of NYC. Pure irony, LOL..
I've not watched it yet but I'm guessing it threw a rod and the broken part of the piston rod is jammed in the engine. Years ago, I bought a newer model Ford that went through a big puttle and sucked in water. It hyro locked so badly that it broke 2 piston rods. I made a lot of money on that car. Well worth my time. I was fortunate that the block wasn't damaged beyond use, the piston sleeves were not damaged.
hey buddy! thanks for watching as always. I'm about to start calling this the X-files of the Nitro RC world, you will see why in the next few vids. THere's so many unexpected surprised. But no worries, I will do my best to try to get it right.
hybrid32494 You will do just fine. I look forward to your videos because you always have something different and fast paced😳. Also... the wife and I drive a 07 Prius so we own the road man!!💥😎
Wow bro the poor sap that owned that did not have a clue on anything! Zero mechanical knowledge but hey thats why we do what we do to help others out !!! Great Vid as always my brother! Ok at the engine part my favorite part! Great job brother !
Hey Hybrid! I just had one of the 3.3 out of a Slayer and the lower inside crank bearing was shot! From sitting around no preventive maintenance done! I soaked the whole engine in WD-40 and came apart great!😉
hey my dude! Thanks! This one is a work in progress for one of my Nitro Gang buddies. I would personally avoid any used RC that was not complete. In the next part you will see the results of me trying to unseize the motor and al the extra parts this thing needs.
I remember watching a vid from “The RC Saylors” where they hyped up the fact that they painted all four tires white on a model truck and went on and on about how great it was. Naturally the paint started chipping off after five minutes and looked absolutely terrible(actually it looked terrible to start with). They couldn’t understand why their painted tires mod didn’t work... 🤔🤣 I cant stand crappy paint jobs on RC’s, it makes them look so cheap. I feel so bad for that Nitro Rustler! Keep up the good vids hybrid 🤙💪
hey bro! What's up. Love this comment btw. I watch the RC Sailors too sometimes, but it's obvious their Lack of real RC knowledge is huge. Then again their only goal to any video is to get you to purchase the product they get for free. I like to put RCs in perspective and compare them to their competition (just like auto journalists do with real cars, you know). Anyway, just wait for the next video in this series (I am calling it the X-Files of RC, ahah).
sup bro! Just wait until the next part and the part after that. It's funny because this Nitro Rustler has surprised everywhere, I just removed one of the RX batteries and it's got negative voltage, ahaha. How the hell do you get negative voltage in a battery? Well this RC got it, this is the X-Files of RC bro! You gonna see it all later.
you're 100% right my dude! Just wait until you see the next few vids on this, you will be in shock. Anyway, I volt tested one of the RX batteries while I was checking the electronics (and yes, they are totally FUCKED), and one of the AA batts has Negative voltage, ahahah. BRO, how can a battery have negative voltage???? WEIRD. I'm calling this the X-files of RC.
I got mine in about the same condition, except it has a 2.5 was never spray painted, and it was assembled when I got it, also has hardly been run at all
hey buddy! thanks for watching! I'm quite confident I will be able to restore this motor and it will kick AS*. Anyway, the traxxas engine exchange "power-up" program is a scam I'd say. You can buy a brand new Dynamite .19 for the price of what traxxas charges for an exchange, lol. IF they charges around 70 or less, I would see that as an option.
@@hybrid32494 I'm an electric guy but have one nitro. May eventually sell off the electrics if I like nitro enough. I hear trx engines suck. I'd like to upgrade mine to OS. I read good things. You seem like a guy who is always looking for a good deal and never buys new. Any brand new RCs?
That was a great video keep up the good work I know you’ll get that 3.3 started and clean out I think you have no problems with your engine to start Can’t wait for your next video when you do the process to clean it out and to start it and have a wonderful day
OHHHHHHH WEEEEEEEEEE Boy has the Boss of The Nitro Gang got he's work cut out!!! Pressures on Boss of The Nitro Gang :) As for the engine? Take it all apart. Put the Orings to one side and soak the rest in old nitro fuel over night or at least for a few hours. Then wash off in soapy water and use an old toothbrush to clean up any last grime and then rinse again in water. Leave to dry natrually in the sun and then cross your fingers and hope it all cleaned up well and the Orings have survived. Then rebuild and add some after run oil and hope the Nitro Gang Gods are looking down on you as the all mightly Boss Of The Nitro Gang!!! LOL ;-) Good luck Boss Of The Nitro Gang!!! You need it LOL Bows!!!
hey bro! the NitroGang boss is here! I'm pretty sure the motor will be fine once I heat it up with a heat gun and some oil, it looks like the previous NOOB owner didn't have enough time to fully destroy this RC bc he spent most of his time painting the chassis and plastic parts, lol. Also I'm quite sure this 3.3 is from a different car, the angle of the carb mounting does not fit the chassis currently, so it's a donor motor. Also the nitro rustler comes with a 2.5 and not a 3.3
after the 3.3 on my tmaxx blew up I started working on my savage 4.6 which im happy to say is running well but still needs fine tuning once I get that bad boy going i'll start on my nitro rustler 2.5 which will only leave me with the revo 3.3, hopefully that one doesnt take a shit on me too.
hey bro! The way the Nitro Life seems to be going is when one RC breaks, they all follow along. It's just a matter of "entropy" you know. The state of constant disorder, JK. I was working on a savage 4.6 the other day for a buddy of mine and it's developed the weirded brake problem, the brake cam itself seems to have twisted and now there are no brakes, means I gotta take it all apart.
hey my dude! YOU'RE right, the piston was 180 degrees in the wrong direction. In a follow up video I took it out and put it in correctly, That would explain why the prior owner most likely could never get it to run well, lol!!
Excellent I will check out that video 👍 When I'm putting a piston in I just make sure the hollow end of the rest pin and the wrist pin clip and the oil holes on the connecting rod all face the carburetor.
whats ups my dude!! That's right, I never miss a chance to show off my Late model Grand Marquis, I love that thing! Only true car guys can appreciate the Panther platform, you know!! It's an 07 LS with 79K, and several flaking paint issues which all the white ford had from this era.
I was just about to turn off my phone and this popped up it made my day I like how when I clicked on it there was five thumbs up and only one view You’re going to be busy with this Are you fixing it for free excluding parts
hey man! Check out my pinned comment, this thumbs down guy isn't gonna get away with this, you don't put the NitroGang down without a confrontation, lol. Anyway, yes, I never charge people for anything if I could help them out and also get some video content myself. I've also repaired a redcat brushed RC for this same owner, the video is not out yet, will be soon. This has been my hobby and life for years, there's no money in repairing old nitro RC, but that's not why I do vids on these topics in the first place. Gotta stay true to yourself and not go to skate parks to destroy crap for pure shock and awe from kids, because no true NitroGang hobbyist would appreciate RC destruction for no point.
@@nomusicrc I'll repose part of the comment for you here. Anyway, yes, I never charge people for anything if I could help them out and also get some video content myself. I've also repaired a redcat brushed RC for this same owner, the video is not out yet, will be soon. This has been my hobby and life for years, there's no money in repairing old nitro RC, but that's not why I do vids on these topics in the first place. Gotta stay true to yourself and not go to skate parks to destroy crap for pure shock and awe from kids, because no true NitroGang hobbyist would appreciate RC destruction for no point.
hybrid32494 it stops at I also repa’ I don’t know what’s wrong with RUclips that you can’t “read more” I will try it here to see if it works on your end I like how I responded to the thumbs down guy before reading your comment about him there are people out there (losers) that subscribe just to thumbs down channels tell if you were able to read this whole thing
@@nomusicrc yes I can read the whole message. I respond to comments on my laptop, never any issues. Yup, the thumbs down does not bother me at all, it's actually irrelevant and does not affect performance at all. Only views matter. I will challenge the thumbs down guy to a T-maxx Bench press competition.
Hi, How you doing Sir. I two have a Nitro Rustler . I am new to nitro. Like the new owner I got mine used off of ebay. when I take the moter out what do I look for in the motor besides rust and to see if it siezed ?
hey buddy! welcome to the the NITRO World!! I have a couple follow-up videos on this exact nitro form this video and the repairs. For the most part what matters is if the motor is seized. Usually they don't move due to getting gummed up over time from Long terms of non-use.
hy bro! So far the engine looks ok, I don't think it will need a rebuild. Just needs to be restored and oiled. I think the previous owner was such a noob that he didn't have enough time to destroy the motor completely, lol. I guess he spent most of the time paining the chassis and plastic parts, ahaha.
I had something similar, traded a slash 4x4 to a friend for 3.3 slayer, 2.5 Tmaxx (in pieces) crawler and some parts. Was wanting the slayer and tmaxx, other stuff was just bonus. He had traded someone for the nitro stuff and the guy he got it from sawed the left side of the slayer off 🤦♂️. So I ended up turning it to a revo.
haha, yup! I never understood what the appeal of coloring plastics are, totally pointless. This rustler was a nice grey color and now it's a weird rooked black, lol. The nitro fuel and oil these things run also easily eat away at the paint, this is why RC parts come anodized and not painted, ahaha...
hey bro! Yes, this is a legit mess in a box. I'm working on the engine right now, as long as the parts are there, I'm not worried. But sure is a whole lot of work. I find that noobs usually buy lots like this and think getting it running is a piece of cake, LOL. It's a matter of how much money you want to throw at it.
That happened to my pro 15 tmaxx the previous or previous previous owner paint some red shit on my aarms and front driver side driveshaft and tire looked like shit but I got it off with oops and it looks great now
Hey man I got gifted a old nitro rustler and I got it running and bought a new receiver and controller and was wondering if you would be willing to buy it off from me or anyone you know because I want to buy a new nitro buggy because I’m tight on money, and what cheap rc nitro car would you recommend, thank you
I know the real reason you don't want to bake it in the oven. You don't have an oven, that's why you always eat pizza and take out. To bake the engine you would need to use you mommy's oven and she woops your donkey! (aka Ass!) I was wrong. Lol No thrown rod. My nitro Rustler 2.5 threw one. I traded up for a 3.3, put the new engine in the Jato and the used Jato engine into the Rustler. It is a lot of fun.
I'm an E word guy but want to go to the nitro side. (except for crawlers. That's a given ). Started with a Revo 3.3. Debating selling my Maxx and E Revo. I could get a few hundred bucks for both. Than just concentrate on nitro. Decisions, decisions...
hey buddy! what's up! I have a very good update video for you, ive done lots of work on this, but it's a runner. Watch this video, I guarantee you will love it. ruclips.net/video/8z7zt_GRVFM/видео.html
I just also wanted to add that I have BOUGHT RC'S from pawn shops that HAVE BEEN SEIZED UP due to leaving NITRO IN TANK, the only way I know of to FREE THAT UP is with GOOD OLD WD 40. I've had engines that sat FOR OVER SEVEN YEARS, put a little, almost a good dose of the stuff in the engine, bing bang boom, ENGINE FIRED RIGHT UP. I would love to converse with you more about this😃😃😃. Have a great day.
hey buddy! thanks for watching. The crank is just a regular pilot shaft style crank, it's common in many nitro motors. I've never owned a Novarossi engine, it may be the time, you have motivated me, lol. In the next part I will take this motor apart, I'm sure it'll be interesting.
Ha Hah Hah Hah I think you’re on point with this comment check out the follow up videos I made on this restoration I guarantee you’ll be surprised by all the discoveries I had to make.
Thanks bro!! Lol. And it seems the haters dont want to live debate me in video, i challenged anybody that wants to. The nitrogang is not weak and we wont take this!! Anyways, nitro will never die and lits more on this rc soon. Thanks for your support!!
Yo, thumbs down guy, don't hide behind the screen, if you want to challenge the NitroGang then come and do it. Respond and be a man, I challenge you, in fact I'll even do a a live debate/discussion of your thumbs down points if you want.
I like how you pinned this to the top so everybody can see it
We stand behind The Boss Of The Nitro Gang so go and stick that thumb in dark places!!! Haters always going to hate!!! Hay Boss Of The Nitro Gang. Take those thumbs down as a compliment and the fact that you are doing something right that someone can't take!!! Bows to the Boss Of The Nitro Gang!!!
Have you blocked anybody from your channel maybe that’s why he gave you a thumbs down and now he can’t comment which is funny
@@nomusicrc maybe a kevin talbot leftover
I am sure it has something to do with Talbot. Probably his boyfriend!
Great video man like always!!
Well you definitely got your work cut out for you but it’s work you enjoy. Also nice of you to help a friend out. How can anyone give you a thumbs down. I don’t understand. Jeff gets them too.
Hey brother just so you're aware don't put that engine in the oven it does have plastic caged bearings and if it is heated to much they can melt and cause a lot of grief awesome video keep up the good work!!
hey bro! Yes, you're 100 right! I have since decided to use a heat gun, it's just easier, and I think it'll be fine. BTW, welcome to the 1/5 Gas Gang!! I'm bout to go watch your new vids.
@@hybrid32494 definitely man and thanks looking forward to see your project running
Perfect timing, just switched the lower chassis plate on my ultimate 3.3 rustler. After a run in with a car tire one of my rear arms ripped out of the chassis. Anyway, completely custom. Every aluminum upgrade available, ported 3.3 with Davis Diesel rod, no expense spared. Not bragging, this was my dream build after getting my first hobby grade rc which was a Nitro Rustler. Awesome job man! #nitrogang
"RUSTLER" is a better guess than "NYPD"
ahhahaaha,, TOTALLY!!! NITROGANG!! I don't think anybody appreciated the funny NYPD is racist humor in this video, it wasn't me saying it, it was the giant bike riding crowd in an very affluent area of NYC. Pure irony, LOL..
I've not watched it yet but I'm guessing it threw a rod and the broken part of the piston rod is jammed in the engine. Years ago, I bought a newer model Ford that went through a big puttle and sucked in water. It hyro locked so badly that it broke 2 piston rods. I made a lot of money on that car. Well worth my time. I was fortunate that the block wasn't damaged beyond use, the piston sleeves were not damaged.
Enjoyed the video. I’m sure you will get this car together without too much of a challenge👍.
hey buddy! thanks for watching as always. I'm about to start calling this the X-files of the Nitro RC world, you will see why in the next few vids. THere's so many unexpected surprised. But no worries, I will do my best to try to get it right.
hybrid32494 You will do just fine. I look forward to your videos because you always have something different and fast paced😳. Also... the wife and I drive a 07 Prius so we own the road man!!💥😎
Wow bro the poor sap that owned that did not have a clue on anything! Zero mechanical knowledge but hey thats why we do what we do to help others out !!! Great Vid as always my brother! Ok at the engine part my favorite part! Great job brother !
Hey Hybrid! I just had one of the 3.3 out of a Slayer and the lower inside crank bearing was shot! From sitting around no preventive maintenance done! I soaked the whole engine in WD-40 and came apart great!😉
That is not Rustler's original engine but if it works that is what matters :)I love you video :)
nice truck bro!
hope the engine is save able!
hey my dude! Thanks! This one is a work in progress for one of my Nitro Gang buddies. I would personally avoid any used RC that was not complete. In the next part you will see the results of me trying to unseize the motor and al the extra parts this thing needs.
I remember watching a vid from “The RC Saylors” where they hyped up the fact that they painted all four tires white on a model truck and went on and on about how great it was. Naturally the paint started chipping off after five minutes and looked absolutely terrible(actually it looked terrible to start with). They couldn’t understand why their painted tires mod didn’t work... 🤔🤣 I cant stand crappy paint jobs on RC’s, it makes them look so cheap. I feel so bad for that Nitro Rustler! Keep up the good vids hybrid 🤙💪
hey bro! What's up. Love this comment btw. I watch the RC Sailors too sometimes, but it's obvious their Lack of real RC knowledge is huge. Then again their only goal to any video is to get you to purchase the product they get for free. I like to put RCs in perspective and compare them to their competition (just like auto journalists do with real cars, you know). Anyway, just wait for the next video in this series (I am calling it the X-Files of RC, ahah).
And or..... quarters for the weight and at the end of the bashing for the soda machine 😆
sup bro! Just wait until the next part and the part after that. It's funny because this Nitro Rustler has surprised everywhere, I just removed one of the RX batteries and it's got negative voltage, ahaha. How the hell do you get negative voltage in a battery? Well this RC got it, this is the X-Files of RC bro! You gonna see it all later.
hybrid32494 I found a set of HG knockoffs .for my rs4
This has clearly been owned by some kid who had not idea what they were doing
you're 100% right my dude! Just wait until you see the next few vids on this, you will be in shock. Anyway, I volt tested one of the RX batteries while I was checking the electronics (and yes, they are totally FUCKED), and one of the AA batts has Negative voltage, ahahah. BRO, how can a battery have negative voltage???? WEIRD. I'm calling this the X-files of RC.
Nitro gang!
I got mine in about the same condition, except it has a 2.5 was never spray painted, and it was assembled when I got it, also has hardly been run at all
Poor nitro rustler! That owner must’ve had a few drinks! Who would do that! Great video!
How was the carb?? To get this one going without some money might be hard
Have you used the Traxxas power up option? I think you can take that motor to a hobby shop for half off a new one
hey buddy! thanks for watching! I'm quite confident I will be able to restore this motor and it will kick AS*. Anyway, the traxxas engine exchange "power-up" program is a scam I'd say. You can buy a brand new Dynamite .19 for the price of what traxxas charges for an exchange, lol. IF they charges around 70 or less, I would see that as an option.
@@hybrid32494 I'm an electric guy but have one nitro. May eventually sell off the electrics if I like nitro enough. I hear trx engines suck. I'd like to upgrade mine to OS. I read good things.
You seem like a guy who is always looking for a good deal and never buys new. Any brand new RCs?
That was a great video keep up the good work I know you’ll get that 3.3 started and clean out I think you have no problems with your engine to start Can’t wait for your next video when you do the process to clean it out and to start it and have a wonderful day
OHHHHHHH WEEEEEEEEEE Boy has the Boss of The Nitro Gang got he's work cut out!!! Pressures on Boss of The Nitro Gang :) As for the engine? Take it all apart. Put the Orings to one side and soak the rest in old nitro fuel over night or at least for a few hours. Then wash off in soapy water and use an old toothbrush to clean up any last grime and then rinse again in water. Leave to dry natrually in the sun and then cross your fingers and hope it all cleaned up well and the Orings have survived. Then rebuild and add some after run oil and hope the Nitro Gang Gods are looking down on you as the all mightly Boss Of The Nitro Gang!!! LOL ;-) Good luck Boss Of The Nitro Gang!!! You need it LOL Bows!!!
hey bro! the NitroGang boss is here! I'm pretty sure the motor will be fine once I heat it up with a heat gun and some oil, it looks like the previous NOOB owner didn't have enough time to fully destroy this RC bc he spent most of his time painting the chassis and plastic parts, lol. Also I'm quite sure this 3.3 is from a different car, the angle of the carb mounting does not fit the chassis currently, so it's a donor motor. Also the nitro rustler comes with a 2.5 and not a 3.3
Soak that bad boy in some 90% alcohol for like 10 minutes works like a charm.
after the 3.3 on my tmaxx blew up I started working on my savage 4.6 which im happy to say is running well but still needs fine tuning once I get that bad boy going i'll start on my nitro rustler 2.5 which will only leave me with the revo 3.3, hopefully that one doesnt take a shit on me too.
hey bro! The way the Nitro Life seems to be going is when one RC breaks, they all follow along. It's just a matter of "entropy" you know. The state of constant disorder, JK. I was working on a savage 4.6 the other day for a buddy of mine and it's developed the weirded brake problem, the brake cam itself seems to have twisted and now there are no brakes, means I gotta take it all apart.
@@hybrid32494 good luck with that and keep the videos coming!
Looked like the Piston was in backwards
I still have my n64 collection of around 50 games with original boxes in excellent condition.
hey my dude! YOU'RE right, the piston was 180 degrees in the wrong direction. In a follow up video I took it out and put it in correctly, That would explain why the prior owner most likely could never get it to run well, lol!!
Excellent I will check out that video 👍
When I'm putting a piston in I just make sure the hollow end of the rest pin and the wrist pin clip and the oil holes on the connecting rod all face the carburetor.
Awesome!
The second I saw the seats I knew you were in a grand marquis haha
whats ups my dude!! That's right, I never miss a chance to show off my Late model Grand Marquis, I love that thing! Only true car guys can appreciate the Panther platform, you know!! It's an 07 LS with 79K, and several flaking paint issues which all the white ford had from this era.
Great video as normal just got some 2.2 ich proline for the mini e-revo vxl 20% top speed .💪🍺👍🕶️ stay safe 🙏
I was just about to turn off my phone and this popped up it made my day I like how when I clicked on it there was five thumbs up and only one view
You’re going to be busy with this
Are you fixing it for free excluding parts
hey man! Check out my pinned comment, this thumbs down guy isn't gonna get away with this, you don't put the NitroGang down without a confrontation, lol. Anyway, yes, I never charge people for anything if I could help them out and also get some video content myself. I've also repaired a redcat brushed RC for this same owner, the video is not out yet, will be soon. This has been my hobby and life for years, there's no money in repairing old nitro RC, but that's not why I do vids on these topics in the first place. Gotta stay true to yourself and not go to skate parks to destroy crap for pure shock and awe from kids, because no true NitroGang hobbyist would appreciate RC destruction for no point.
hybrid32494 Somethings wrong with RUclips I could only read up to where it says I never charge anybody for anything
@@nomusicrc I'll repose part of the comment for you here. Anyway, yes, I never charge people for anything if I could help them out and also get some video content myself. I've also repaired a redcat brushed RC for this same owner, the video is not out yet, will be soon. This has been my hobby and life for years, there's no money in repairing old nitro RC, but that's not why I do vids on these topics in the first place. Gotta stay true to yourself and not go to skate parks to destroy crap for pure shock and awe from kids, because no true NitroGang hobbyist would appreciate RC destruction for no point.
hybrid32494 it stops at I also repa’ I don’t know what’s wrong with RUclips that you can’t “read more” I will try it here to see if it works on your end I like how I responded to the thumbs down guy before reading your comment about him there are people out there (losers) that subscribe just to thumbs down channels tell if you were able to read this whole thing
@@nomusicrc yes I can read the whole message. I respond to comments on my laptop, never any issues. Yup, the thumbs down does not bother me at all, it's actually irrelevant and does not affect performance at all. Only views matter. I will challenge the thumbs down guy to a T-maxx Bench press competition.
That videos was what i very waiting.
NItrogang!! what's up man!! More on this soon, I want to get it running. Going to heat the block with oil and hopefully it'll be free.
SPEEDER5 um what
Hi, How you doing Sir. I two have a Nitro Rustler . I am new to nitro. Like the new owner I got mine used off of ebay. when I take the moter out what do I look for in the motor besides rust and to see if it siezed ?
hey buddy! welcome to the the NITRO World!! I have a couple follow-up videos on this exact nitro form this video and the repairs. For the most part what matters is if the motor is seized. Usually they don't move due to getting gummed up over time from Long terms of non-use.
3.3 rebuild!
hy bro! So far the engine looks ok, I don't think it will need a rebuild. Just needs to be restored and oiled. I think the previous owner was such a noob that he didn't have enough time to destroy the motor completely, lol. I guess he spent most of the time paining the chassis and plastic parts, ahaha.
@@hybrid32494 lol i agree still cant believe someone would paint all that stuff even the fuel tank😄
Awesome thanks
I had something similar, traded a slash 4x4 to a friend for 3.3 slayer, 2.5 Tmaxx (in pieces) crawler and some parts. Was wanting the slayer and tmaxx, other stuff was just bonus. He had traded someone for the nitro stuff and the guy he got it from sawed the left side of the slayer off 🤦♂️. So I ended up turning it to a revo.
The blue chassis looked way better! I would never paint my nitro Rustler
Yee yee spray paint everything! Haha. It’s pretty crazy to see people do that
haha, yup! I never understood what the appeal of coloring plastics are, totally pointless. This rustler was a nice grey color and now it's a weird rooked black, lol. The nitro fuel and oil these things run also easily eat away at the paint, this is why RC parts come anodized and not painted, ahaha...
Ug! That looks like one of the messes I would buy and regret it down the road.
hey bro! Yes, this is a legit mess in a box. I'm working on the engine right now, as long as the parts are there, I'm not worried. But sure is a whole lot of work. I find that noobs usually buy lots like this and think getting it running is a piece of cake, LOL. It's a matter of how much money you want to throw at it.
What a nightmare. Good thing the motor is salvageable. That model had seen better days someone should be shunned by the nitrogang
That happened to my pro 15 tmaxx the previous or previous previous owner paint some red shit on my aarms and front driver side driveshaft and tire looked like shit but I got it off with oops and it looks great now
Hey man I got gifted a old nitro rustler and I got it running and bought a new receiver and controller and was wondering if you would be willing to buy it off from me or anyone you know because I want to buy a new nitro buggy because I’m tight on money, and what cheap rc nitro car would you recommend, thank you
Meby the Tank paindet too.
I know the real reason you don't want to bake it in the oven. You don't have an oven, that's why you always eat pizza and take out. To bake the engine you would need to use you mommy's oven and she woops your donkey! (aka Ass!)
I was wrong. Lol No thrown rod. My nitro Rustler 2.5 threw one. I traded up for a 3.3, put the new engine in the Jato and the used Jato engine into the Rustler. It is a lot of fun.
The person who had this could not even start it maybe 👍🏻
Hey bro!! Wait until you see part 3 of this video. I ran into something I never thought I would see, the piston was incorrectly put in the motor, LOL.
Yeah I’m pretty sure the original owner is an E-word guy. The nitro gang don’t treat nitros like this...
I'm an E word guy but want to go to the nitro side. (except for crawlers. That's a given ). Started with a Revo 3.3. Debating selling my Maxx and E Revo. I could get a few hundred bucks for both. Than just concentrate on nitro. Decisions, decisions...
ON AN ENGINE LIKE THAT IVE TAKEN AND SPRAYED THE HELL OUT OF AN ENGINE LIKE THAT WITH A GOOD DOSE OF WD 40, WORKS EVERY TIME!!!!!!!!
hey buddy! what's up! I have a very good update video for you, ive done lots of work on this, but it's a runner. Watch this video, I guarantee you will love it. ruclips.net/video/8z7zt_GRVFM/видео.html
I just also wanted to add that I have BOUGHT RC'S from pawn shops that HAVE BEEN SEIZED UP due to leaving NITRO IN TANK, the only way I know of to FREE THAT UP is with GOOD OLD WD 40. I've had engines that sat FOR OVER SEVEN YEARS, put a little, almost a good dose of the stuff in the engine, bing bang boom, ENGINE FIRED RIGHT UP. I would love to converse with you more about this😃😃😃. Have a great day.
That crank looks like a Novarossi cx12 crank
hey buddy! thanks for watching. The crank is just a regular pilot shaft style crank, it's common in many nitro motors. I've never owned a Novarossi engine, it may be the time, you have motivated me, lol. In the next part I will take this motor apart, I'm sure it'll be interesting.
Great Video!!! I make rc videos to!!!
His accent has so many sounds Russian English and British
hey bro! thanks for checking out this video! You got 2 of the accent right, not the British one though, lol.
Must have been owned by a tweaker lol 😂
Ha Hah Hah Hah I think you’re on point with this comment check out the follow up videos I made on this restoration I guarantee you’ll be surprised by all the discoveries I had to make.
He should have taken better care of it
Hey I know that park lol
Hi
This man does jot deserve 4 dislikes
Thanks bro!! Lol. And it seems the haters dont want to live debate me in video, i challenged anybody that wants to. The nitrogang is not weak and we wont take this!! Anyways, nitro will never die and lits more on this rc soon. Thanks for your support!!