DYI Wine Barrel Table
HTML-код
- Опубликовано: 16 окт 2024
- Use reclaimed wine barrel wood to make a beautiful DYI table! Using my Bosch Chop saw and Powermatic Table saw to cut a large wooden circle. Jet clamps came in handy for glue ups.Drilling and plugging all the screws with my Dewalt drill.All this makes a great wooden table to add to your outdoor furniture collection or as a side table in your house.
For any questions please email me at:
Themuzshop@gmail.com
And for more content, follow me on:
Instagram: / themuzshop
Twitter: / themuzshop
What I used to finish it -
Howard's outdoor Finish -amzn.to/2ZoVVud
Absolute beauty. Very well crafted
I really appreciate that, thank you. 👍👍
Great video! High quality, great shots. Best part was you conversing with your dog at the end. He gets you like no one else!! What a gift!!
Thank you. He is the only one that listens.😂🤣
My whisky barrel lid that I bought came in bits. I didn’t realise that I had to assemble and glue it but that’s ok, I watched this so now I’m sorted. I have an old metal chair that I’ve chopped the Back off to make a table for the garden. Thank you, nice touch with your wee dug👍❤️
I like the metal chair idea. 👍🏻👍🏻 Thanks for watching.
Super build and complements previously built chairs nicely. The Muz Shop keeps churning out fantastic bespoke creations.
Larry Banda thanks and I think the Shop Dog approves too.
Very clever design. I like the metal band and riveting. Haven't seen that done before. And what a great shop!
Thanks Man.
Just saw one of those tables in an unfinished furniture store and I'm in love with it. Now I'm trying to figure of how to make one without any skills :-)
Claudia Estrada you can do it , just take your Time. Thanks for watching
What is the final radius of the two plywood pieces under the barrel head? Just to help me understand (sometimes that takes a lot) when you cut the legs to length, is this where the 10 degree angle comes into play? I have now watches this video 6 times and it never gets old. I am looking forward to building a set of these for my living room.
Thank you so much!! The size of the plywood is determined on the size of your barrel top, cause they are different sizes. I made my so there was about 1 1/2"-2" overhang of the top. As for the legs cutting to length, you can but there is no need to cut them at 10 degees cause it's all hidden with the metal band. Best of luck and happy build. Email me if you have more questions Thanks again.
very nicely built -i like
Thanks 👍🏻👍🏻👍🏻
Very nice work
Great build. And not too difficult to follow.
Thanks for sharing. ;)
Thank you for watching and glad you liked it.
Really Cool Thanks!
Thank you, glad you enjoyed it…👍👍
Great build!
Thanks!
Very nice table! At what angle did you cut out the table leg holes?
!0 degrees ... Glad you liked it.Thanks!!
Awesome job... What finish did you use and how is it holding up?
Howard SWAX16 SunShield
I put this of once a year, it’s was to apply and seems to last the year. Outdoor Furniture Wax with UV Protection, 16-Ounce, Yellow www.amazon.com/dp/B001EXZY8K/ref=cm_sw_r_cp_api_i_nJR7Cb3VAZWAZ
@@TheMuzShop is that the same finish you used on your chairs?
@@dmoss8928 yes
Great job.
Thank you, if you're into wine barrel stuff my channel has a few more projects with barrels. Check it out. Thanks again
What did you use for the finish?
Howard's Outdoor Finish-amzn.to/2ZoVVud
@@TheMuzShop Thank you
Cool video, thank you!
Kasey Warner thanks glad you like it. 👍👍
What kind of rivet gun is that?
What rivit gun is that? Definitely need one!
Hey Micheal, Thanks for watching . I'm no expert on rivet guns , just needed one for the build. But the one I got is a Chicago Pneumatic CP7150 airgun. got it online from Hanson rivet supple co.
great! How about the rivits? I see alot on their site but it's kinda confusing......
Michael Utterback I got 1/4x3/8 steel sold rivet round head, plain finish. You’ll need a bit to match your rivets. 1/4 roundhead air hammer bit. I remembered I called them and they help me get what I need. So maybe give them a call to make sure your getting exactly what you need.
Thank and don’t forget to subscribe 😉
My hoops have a bevel that I found it hard to work around. I'm thinking of buying a flat strip of metal from the hardware store in place of the hoops. Suggestions?
Carl Dombek I believe if you use one of the hoops that go around the center of the barrel they have less of a bevel. I cut it and shortened it to fit. Then screwed it on the upper side of the hoop towards the top. It really is just decoration anyways. Hope this helps.
Bevel the pplywood to match angles.
What are you and Shilo talking about?
I was telling him I was tired of him taking time off of work to take a dog nap also stop messing up his lines and show up for rehearsal.
What type of drill bit is that that you use to pre drill your screw holes?
Thanks for watching ! They are called countersink drill bits. Something like these on amazon .....www.amazon.com/Irwin-Tools-1882792-SPEEDBOR-Countersink/dp/B00IZFHRXA/ref=cm_sw_em_r_dp_dz_U_RoK5AbEE7ES0D_im
The Muz Shop what type of screws do you use? Length, #?
T L Deckmate Star Drive coated screws from Home Depot #8 x 1 5/8 to 2”..
Same bits and screws for the adirondack chairs?
yes
Where can I find these schematics or instructions?
weird..
Thanks glad you enjoyed it.....
How’s that??
I don't understand what he means????