Yeah.....looking all over for a db killer for my powercore, but I guess I'll just put the stock exhaust back on (luckily the previous owner had it and gave it to me) and load a different map into the PC5 so I can run in the woods and not have the enviro police up my ass.
can’t remember if when i got my powercor4 slip on if it came with spark arrestor or not it was back in 2016 shoot cant tell if its in or not if it is i wanna take it out but dont want bike to he more lean
Too bad FMF inserts are NEVER available! I will never buy another FMF product again due to their crappy customer support and non-existent parts availability. They can't blame it on Covid either, this has been a problem for a decade..
one problem......the design of your Q4 doesn't have ANYTHING to grab ahold of and remove the spark arrestor....... Advice??? Cuz I'm currently pissed off with messing with it with NOTHING WORKING!
I have the fmf 4.1 titanium ... horny part! Now to my complaint! I got no instalationsanleitung with my exhaust How I install the TB killer! I've tried to find something in the net, no change! Since this was not my first exhaust fmf I darzdem darzdem dared and installed the tb killer. WD 40 used to smear, all went well, then I wanted to remove the killer again and what was, I had 0 chances to get the tb killer from the end pot. End pot opened in the back and tries to get the tb killer out, no change! Exhaust was in the ass after 4 hours of futile distance from tb killer! Now I have another new fmf 4.1 ordered me and this time was a guide there! However, I will certainly not self-installing these killer but can do this directly from KTM. Let's see how they get the tb killer out again. So I have never seen such a shit of fmf!
Ich habe den fmf 4.1 titanium... geiles teil ! Nun zu meiner Beschwerde! Ich habe bei meinem Auspuff Keine instalationsanleitung bekommen Wie ich den TB killer einbaue! Habe im i net versucht irgendwas zu finden, keine Change! Da dies nicht mein erster Auspuff von fmf war Habe ich mich trozdem heran gewagt und den tb killer installiert. WD 40 zum schmieren verwendet reingesteckt, alles soweit gut, dann wollte ich den Killer wieder entfernen und was war, ich hatte 0 Chancen den tb killer aus den endtopf zu bekommen. Endtopf hinten aufgemacht und versucht so den tb killer herauszubekommen, auch keine Change! Auspuff war im Arsch nach 4 Stunden vergeblicher Entfernung vom tb killer! Nun habe ich mir wieder einen neuen fmf 4.1 bestellt und dieses mal war eine Anleitung dabei ! Jedoch werde ich sicher nicht selbst diesen Killer einbauen sondern dies direkt von KTM machen lassen. Bin gespannt wie diese den tb killer wieder herausbekommen. Also so einen scheiss habe ich von fmf noch nie erlebt !
There could be a lot more information on your pipes I couldn't figure out if you could put a spark arrestor on a pipe or you had to buy one already had a spark arrestor does this quiet thing going all your pipes or does it have to come with the pipe you buy can you put it in afterwards you don't give the dimension of the tailpipe on any of your ads I can't figure out what parts works with what other part I bought a mini moto pipe for my 110 and I'm trying to find a spark arrestor for it but you give very little information about any of the products you sell making it impossible for me to buy anything from you I'll have to just make it myself I guess
I have the fmf 4.1 titanium ... horny part! Now to my complaint! I got no instalationsanleitung with my exhaust How I install the TB killer! I've tried to find something in the net, no change! Since this was not my first exhaust fmf I darzdem darzdem dared and installed the tb killer. WD 40 used to smear, all went well, then I wanted to remove the killer again and what was, I had 0 chances to get the tb killer from the end pot. End pot opened in the back and tries to get the tb killer out, no change! Exhaust was in the ass after 4 hours of futile distance from tb killer! Now I have another new fmf 4.1 ordered me and this time was a guide there! However, I will certainly not self-installing these killer but can do this directly from KTM. Let's see how they get the tb killer out again. So I have never seen such a shit of fmf!
This would be very useful if fmf was able to keep products in stock
Yeah.....looking all over for a db killer for my powercore, but I guess I'll just put the stock exhaust back on (luckily the previous owner had it and gave it to me) and load a different map into the PC5 so I can run in the woods and not have the enviro police up my ass.
Exactly, fuck fmf .
can’t remember if when i got my powercor4 slip on if it came with spark arrestor or not it was back in 2016 shoot cant tell if its in or not if it is i wanna take it out but dont want bike to he more lean
Is there a before and after to see how much quieter it makes the exhaust?
i m prety sure there is something on there site if ur looking for DB but otherwise just look on yt there should be conparesn
"Apply the spark arrestor decal"
......Yeah ok buddy 😆
Does the quite insert make your bike kinda like a silencer or more quite
Too bad FMF inserts are NEVER available! I will never buy another FMF product again due to their crappy customer support and non-existent parts availability. They can't blame it on Covid either, this has been a problem for a decade..
They are literally shit. Probably out of business
They were extremely helpful to me a year ago got me the part I needed within a week. Sucks you had a bad experience
Thin apply of copper paste on spark arrestor is far better than wd40 and carbon build up.
From where can I buy a quiet insert? Any links pls?
Does this work with my fmf 4.1 titanium because it has a small hole for a srew
So is a quiet insert the same thing as a spark arrestor?
The spark arrestor is the wire screen on the insert.
Phillip Stoltzfus thank you bro
Does this make the exhaust quieter? My exhaust is so loud it is making my ears ring and I need to quieten it down a bit
Mine too...wish I knew of some way to quiet it up
It does make it quiet. It takes away the loud pop. I decided to take mine out for shits and giggles and holy crap it got loud
it makes the exhaust diameter smaller.....the spark arrestor does nothing for sound.
one problem......the design of your Q4 doesn't have ANYTHING to grab ahold of and remove the spark arrestor....... Advice??? Cuz I'm currently pissed off with messing with it with NOTHING WORKING!
I have the fmf 4.1 titanium ... horny part! Now to my complaint! I got no instalationsanleitung with my exhaust How I install the TB killer! I've tried to find something in the net, no change! Since this was not my first exhaust fmf I darzdem darzdem dared and installed the tb killer. WD 40 used to smear, all went well, then I wanted to remove the killer again and what was, I had 0 chances to get the tb killer from the end pot. End pot opened in the back and tries to get the tb killer out, no change! Exhaust was in the ass after 4 hours of futile distance from tb killer! Now I have another new fmf 4.1 ordered me and this time was a guide there! However, I will certainly not self-installing these killer but can do this directly from KTM. Let's see how they get the tb killer out again. So I have never seen such a shit of fmf!
Ich habe den fmf 4.1 titanium... geiles teil !
Nun zu meiner Beschwerde!
Ich habe bei meinem Auspuff Keine instalationsanleitung bekommen Wie ich den TB killer einbaue!
Habe im i net versucht irgendwas zu finden, keine Change!
Da dies nicht mein erster Auspuff von fmf war Habe ich mich trozdem heran gewagt und den tb killer installiert.
WD 40 zum schmieren verwendet reingesteckt, alles soweit gut, dann wollte ich den Killer wieder entfernen und was war, ich hatte 0 Chancen den tb killer aus den endtopf zu bekommen.
Endtopf hinten aufgemacht und versucht so den tb killer herauszubekommen, auch keine Change!
Auspuff war im Arsch nach 4 Stunden vergeblicher Entfernung vom tb killer!
Nun habe ich mir wieder einen neuen fmf 4.1 bestellt und dieses mal war eine Anleitung dabei ! Jedoch werde ich sicher nicht selbst diesen Killer einbauen sondern dies direkt von KTM machen lassen.
Bin gespannt wie diese den tb killer wieder herausbekommen.
Also so einen scheiss habe ich von fmf noch nie erlebt !
There could be a lot more information on your pipes I couldn't figure out if you could put a spark arrestor on a pipe or you had to buy one already had a spark arrestor does this quiet thing going all your pipes or does it have to come with the pipe you buy can you put it in afterwards you don't give the dimension of the tailpipe on any of your ads I can't figure out what parts works with what other part I bought a mini moto pipe for my 110 and I'm trying to find a spark arrestor for it but you give very little information about any of the products you sell making it impossible for me to buy anything from you I'll have to just make it myself I guess
I took it out and kept it out
thats the way brother
Where can i get these quiet inserts? I have fmf powercore 4 exhaust for honda crf250l 2017!!!!
hey mate im looking to buy one of those, where can i grab a powercore 4.
@@tomling7407 crf's only. com
did you find one? I am looking for one for my 2015 crf250l with a fmf powercore 4 and megabomb header...
Abhishek bro Power core4 ka kinu vayo kati ma kiinu vayo? I also need it ,
@@TheUncommonKIBBLES me too for my 2016
You really big about your products you really could give the consumer more information most your pipes say they take the quiet cord you not
Bow down I take it out with the q4
They're lying quiet core doesn't fit most of their pipes all their pipes say they take the quiet core but they're lying
what if Mines gone lol
Hooooooola FMF
I don't think it was actually dirty...
Mine did not go in that easy I had to use a hammer 😂 🤷
That easy...
I have the fmf 4.1 titanium ... horny part! Now to my complaint! I got no instalationsanleitung with my exhaust How I install the TB killer! I've tried to find something in the net, no change! Since this was not my first exhaust fmf I darzdem darzdem dared and installed the tb killer. WD 40 used to smear, all went well, then I wanted to remove the killer again and what was, I had 0 chances to get the tb killer from the end pot. End pot opened in the back and tries to get the tb killer out, no change! Exhaust was in the ass after 4 hours of futile distance from tb killer! Now I have another new fmf 4.1 ordered me and this time was a guide there! However, I will certainly not self-installing these killer but can do this directly from KTM. Let's see how they get the tb killer out again. So I have never seen such a shit of fmf!
Lying don't by-product
Too bad so sad