Imagine what will happen if they add a test fixture for SMD devices and the functionality of a curve tracer for matching semiconductors. Every engineer would mention this as part of a fundamental engineering toolkit. So they are almost there...
I was thinking the same thing when I first saw this item on eBay - why not incorporate a transistor curve tracer functions? But to make a proper transistor curve tracer you'll need a plus and minus 50 to 100 volt supply. Or I guess if you just used two 9v batteries (+ and -) that would tell you something about your transistor profile. But I guess I'll have to fall back on my Jud Williams Model A for now ; )
One things I see is missing from measure capacitors is the ESR which is very important in some cases. Else seems to be ok for beginners and small hobbyes.
Ho Daniel, you're totally right and it's a pitty because it is much faster than the previous versions. I found out in the FNIRSI whatsapp group that it can't be fixed by firmware upgrade... Thanks for watching! 👍
@@TechCornerTV Hi , you said you found FNIRSI whatsapp group it can fix by upgrade firmware? or it cant fix ? if it can where to download the firmware thanks..
@@6p1p Hi, what I meant is for you to ask for a replacement unit os whatsapp group, or a new board something like that. For what I know, there is no new firmware for this unit, but I can be wrong.
OpenSource component tester in nicer case is great idea. Bundled SMD tester pincers and another menu item for LED test (extend diode test with added polarity switching in runtime to lit backward soldered LEDs) would be a bomb. Oscilloscope is redundant here.
Hi, I tend to agree with you. I see this a piece of hardware that students or hobbyists will like to have a 2 in 1, it's a pit that it will not show the ESR like the other IC testers do. Thanks for watching! 👍
@@TechCornerTV You can integrate only so much devices in one case where they doesn't interfere one with another. When students will begin real work tasks in electronics they will suddenmly discover that much more convenient is to have component tester and oscilloscope in separate cases. Learned by hard practice :)
@@nbthanhbk2600 This one is a bit less precise, but much more accessible. If you have no access to professional meters, but need cheap LCR meter for component testing for your DIY projects, this one is superb.
Thanks for the review. I'm not familiar with oscilloscopes yet but am in the process of learning more about them. I do some basic electronics repair and am also a shade tree mechanic and car enthusiast. I need something cheap to test sensors in autos and basic components on the bench. Would this device work for these purposes? thanks in advance...
Hi, you have later than this video, the video for the DSO-TC2, it's more recent and better, I'm not into auto electronics, but a lot of viewers say that he his great for that, can't confirm though. Thanks for watching!
Год назад+1
Very detailed and easy to understand introduction! thank you for sharing. I will buy 1 device tonight. Coment from Vietnam
Hi Morier, if figures, the TC1 also worked only with some protocols. I tested with my Samsung remote and it worked ok. The device has to have the protocol saved in the firmware to decoded and I think it should have only the most used. Speculating here... thanks for watching! 👍
on the oscilloscope juste long trames are recognized. rc5 ans rc7 protocols are not recognized. finding littérature about protocoles is very difficult except for rc5
Hi Ahmad, you're right! Only noticed that after naking the video, my bad! But pros and cons considered, personally I would spend the money on this. It is able to measure the components on the board, while my TC1 is not, so all things considered, still nice in my opinion. Thanks for watching! 👍
I bought the owon handheld. If you save this money and and put in the owon by £120 you gets a awesome real machine dual channel 150mhz, 0.512Gsps ,signal generator and really good multimeter
Hi Andrés, I so gonna review that orcilloscope when I have the funds for it... I reached Owon but they didn't seemed interested, so, I have to wait to get the funds, but it is on my wishlist... 😁 but don't forget that £120 is almost 200€, 4 times the price of this device and isn't a multitester. Is a way better oscilloscope, no doubt about it. Thanks for watching! 👍
Hey Virgilio, sorry the late reply, out for vacations!!! It's a nice device, if you decide to get one, don't forget the affiliate links! Thanks for watching 👍
Gretting. I have a few questions. Is this the same as lcr tc2? Is there a diference between those and MESR-100? Can i also measure capacitors on board without detaching them like i can do with mesr 100?
Hi, no, you cannot measure capacitor on the board, well you can, but will not give the correct values. I'm might be wrong, but this unit is much more accessible also than the MESR-100 if I remember correctly. Thanks for watching.
It didn't seem to agree with your component tester. Which one is badly wrong? Perhaps if you put a zener diode in the correct way round you might be able to demonstrate whether that feature actually works properly.
Hi Brian, thank you for your input on this, I'll have to see again what I did wrong to prevent making the same mistake in the future. Thanks for watching.
Love your reviews ^_^ As a hobbyist, I love FNIRSI too - I have the TC2 and the 138 Pro but then I also upgraded to the DSO 1014D and for MY needs, it more than meets its potential, so regardless what some naysayers have been toting about it - FNIRSI is really doing a great job at a very affordable price :)
Hi, finally someone that it get's it! Not everyone will need a ultra accurate oscilloscope/tester for the use they do of the device. I try to present the device the best I can and leave the decision to the viewer! Thanks for watching and your supportive comment, really appreciated! 😁
Hey there, nice review! Did you ever test the DS18B20 function? Just received my DSO-TC2 and it shows wrong temperatures. In my case 3.5°C indoors. The same DS18B20 connected to µC shows something about 21°C. So the Sensor is definitely working...
I bought one of this but it did not include de p6100 probe. Bought the probe on ebay but did not include the adapter for the osccilloscope small entrance) Is not available in amazon and only one seller on ebay sells it with the adapter but he does not ship to USA.Can anyone tell me where I can buy the adapter?
Hi, yes, but you meed to use the 10x probe and you should be really careful, one mistake and it's done 😁 the manual says you can go up to 400V. Thanks for watching.
@@TechCornerTV Lucky me and thank you for the info and advice. Unfortunately, my T3 did not come with the 10x Probe other than the normal 2 wires meant to connect to the DSO INPUT with 2 crocodile clips at the end.
200 kHz is very low. FNIRSI makes a 100 mhz oscilloscope already. (Really 40 or 50 mhz). They should of used that chip. The rest is great. Ill wait to see if they come out with a faster scope.
Hey Tron, don't forget that you're watching a 30€ oscilloscope + a 10€ multi-purpose tester, so you can't ask for much... but with the all package, some more juice on the oscilloscope will be the cherry on the top of the cake... but maybe next time, even so, only for the tester, I would buy it. Super fast, really happy with it! Thanks for watching! 👍
wonderful FNIRIS DSO-TC2 test equipment 😎and please do not use Styrofoam is a trademarked brand of closed-cell extruded polystyrene foam not earth friendly. 🙄
Hi, it is a nice equipment, used mostly as component tester, but yes, very nice! Styrofoam yeah, pretty bad, but most of the electronics that are delivered from china have it... it will take some years to solve this! Thanks for watching 👍
Hi! Sorry for this late reply, but I kind of had mine momentary lost between all the packages I have here... If I had given a feedback before, your message will disapear from my YT dashboard of messages to reply, but today I found it and test it on my mV voltage reference board and while the TC1 was unable to correctly measure the resistor on the board, the TC2 was able to correctly indentify them and return the correct resisntance, so to answer your question, yes, you can test components directly on the board, well at leas resistor, only tested with resistors! Thanks for watching 👍
Is there any support for downloading images / screenshots from the device and saving them elsewhere ? Or is the only option to take a photo of the display using your camera ?
Hi Patrick, You can connect the device to your PC and I'm 99% sure that it opens a folder in your PC where you can download the screenshots you made. Thanks for watching!
Olá António, sim, tens razão. É realmente uma pena, é tipo morrer na praia, tens tudo melhor que o TC-1, mas depois falta-lhe essa função e mais, pelo que li no suporte da FNIRSI, não pode ser corrigido com upgrade de firmware, parece estranho, mas foi o que disseram. Obrigado por assistires! 👍
@@TechCornerTV Hi! Thank you, they already suggested to me the marking MM32F103RET6 for the multitester and CH32F103C8T6 for the oscilloscope! These are Chinese analogues of STM32.
Hello, 1x 40V and 10x 400V put you can see in the product page in aliexpress, you have there the specs, I believe. You have the link in the video description. Thanks for watching.
Hello Vlad, I think it is the fast moving option, will allow you to move the cursor in a fast way. But if you tell me the time in the video m:s I can confirm. Thanks for watching 👍
Hi Hugo, thank you for the video. I'm an electrician, I work with 230v. I see the TC2 can measure in AC and I also saw the X10 feature. I'm joining the dots together here but I don't know, does the TC2 measure AC voltage too? Why would I want that when I have a multimeter? Just curious, really. I also want to test sliding neodymium magnets across coils of wire and reading the oscilloscope readings that way. I see the TC2 doesn't have a button or setting for MAX or MIN readings. Perhaps can it record the data to download to a computer as a data logger?
Hi Jacques, let me be honest, I don't work with that voltage in my projects and I'm self tought person with already some knowledge, but light years behing any engineer. That said, i *think* you'll be ok measuring AC if you use the 10X probe. The thing of measuring with the oscilloscope is not normally to measure the voltage, you can do that without a sweat with a multimeter as you mentioned. But with the oscilloscope you can analyse the signal, the sinewave, if you have ripples/noise and stuff like that. The oscilloscope can give you also vpp (voltage peak to peak) that I don't know if the multimeter can give you that, probable some high end can... really don't know. The DSO-TC2 oscilloscope part is (as far I can tell) heavilly based on the DSO-138 (PRO) that is one of the more basic oscilloscopes that you can find, consider the oscilloscope a bonus, it works ok, but don't expect any other functionalities other than what you saw in the video. The DSO-PRO (5Mhz) also from FNIRSI as lot more functions that this one and for almost the same price, BUT, doesn't have the multi-tester. Hope that my comment in some way helped, thank you so much for watching and for your input on this video! 👍
@@TechCornerTV Do you work with data loggers? My focus is on passing magnets over coils and thinking about making a fan for free energy. One can get 1kw drone motors, which you can imagine are tiny. I need the tools to analyze and experiment with 🤔
If you do sliding magnets and set the triggning and time scale right you should be able to catch a max min on the osc. Won't be many significant figures. Just noticed that when trig is "AUTO" you can increase the time unit to 500s! And it does show a Vmax & Vmin. But I fear you will lose more energy than you get "for free". But it can give experience! So measure away!
Hello! Do you know if it's possible to measure inductance with this equipment? its written in the description LCR measurement, so I assumed it's possible to measure inductance.
Hi Francesco! It seems it does not. Bummer! I was so pumped with this, I didn't notice that detail. Maybe can fixed with a firmware upgrade. Thanks for watching! 👍
Hey John, exactly, the idea in this device is to join to cheap/low cost devices in to one, I don' think they even thought in ramp it up a bit, with all the work on the shell and the overall quality, it deserver a bit mode speed on the oscilloscope, but I get it, they have to sell low to sell a lot. Thanks for watching! 👍
@@TechCornerTV I mean it's indeed very handy no doubt since one get's to have a component tester and a (very limited) dso ... I would not mind to have no doubt especially for the price. But the sampling rate on a digital oscilloscope is (almost) everything ... :) Nice video btw, congrats. Fazes bons videos parabéns!
Hi Jeamel, what's up with yours? It stopped working? If so, go to the www.fnirsi.cn/support and use the QRCode to join the whatsapp channel and ask for support. They probably replace that unit or give you a solution. Thanks for watching and good luck! 👍
Such a pity you do not see ohms when you test caps, and for me it is then a no go, you also have to see ohms, because a lot of times the uF and Vloss is good, but the ESR/ohms is bad, and that means it's a bad cap, and you cannot see that with this device, such a pity, i wanted to buy it, also because of the Oscilloscope, but i will stick with my BSIDE ESR02PRO, that is a great accurate device.
I bought this for component testing, the scope is just a small bonus
Hi! I agree with you, the tester works so well and so fast, that the oscilloscope isn't the main feature of the device 😁 thanks for watching! 👍
Imagine what will happen if they add a test fixture for SMD devices and the functionality of a curve tracer for matching semiconductors. Every engineer would mention this as part of a fundamental engineering toolkit. So they are almost there...
Hi John, yeap! SMD testing is a pain in the @$$... it will be a nice feature to have for sure. Thanks for watching! 👍
I was thinking the same thing when I first saw this item on eBay - why not incorporate a transistor curve tracer functions? But to make a proper transistor curve tracer you'll need a plus and minus 50 to 100 volt supply. Or I guess if you just used two 9v batteries (+ and -) that would tell you something about your transistor profile. But I guess I'll have to fall back on my Jud Williams Model A for now ; )
One things I see is missing from measure capacitors is the ESR which is very important in some cases. Else seems to be ok for beginners and small hobbyes.
Ho Daniel, you're totally right and it's a pitty because it is much faster than the previous versions. I found out in the FNIRSI whatsapp group that it can't be fixed by firmware upgrade... Thanks for watching! 👍
@@TechCornerTV Hi , you said you found FNIRSI whatsapp group it can fix by upgrade firmware? or it cant fix ? if it can where to download the firmware thanks..
@@6p1p Hi, what I meant is for you to ask for a replacement unit os whatsapp group, or a new board something like that. For what I know, there is no new firmware for this unit, but I can be wrong.
is there a better device with ESR since then?
@@lpeter1172 search for MK-328 TR/ LCR/ESR tester. i have that one and measure also SCR
7:00 those connectors are called "micro BNC" to BNC adapters ;)
Hi, the term that was missing was MCX connectors 😁 Thanks for watching! 👍
OpenSource component tester in nicer case is great idea. Bundled SMD tester pincers and another menu item for LED test (extend diode test with added polarity switching in runtime to lit backward soldered LEDs) would be a bomb. Oscilloscope is redundant here.
Hi, I tend to agree with you. I see this a piece of hardware that students or hobbyists will like to have a 2 in 1, it's a pit that it will not show the ESR like the other IC testers do. Thanks for watching! 👍
@@TechCornerTV You can integrate only so much devices in one case where they doesn't interfere one with another. When students will begin real work tasks in electronics they will suddenmly discover that much more convenient is to have component tester and oscilloscope in separate cases. Learned by hard practice :)
So với thiết bị đo LCR chuyên dung thì sao bạn
@@nbthanhbk2600 This one is a bit less precise, but much more accessible. If you have no access to professional meters, but need cheap LCR meter for component testing for your DIY projects, this one is superb.
Thanks for the review. I'm not familiar with oscilloscopes yet but am in the process of learning more about them. I do some basic electronics repair and am also a shade tree mechanic and car enthusiast. I need something cheap to test sensors in autos and basic components on the bench. Would this device work for these purposes? thanks in advance...
Hi, you have later than this video, the video for the DSO-TC2, it's more recent and better, I'm not into auto electronics, but a lot of viewers say that he his great for that, can't confirm though. Thanks for watching!
Very detailed and easy to understand introduction! thank you for sharing. I will buy 1 device tonight. Coment from Vietnam
Hey Kevin, Glad it was helpful! Thanks for watching 👍
Thanks a lot by review! It helps a lot
Hi, so glad to hear that! Thanks for watching!
thanks for this review, the ir decoding work only with two of my five remotes
Hi Morier, if figures, the TC1 also worked only with some protocols. I tested with my Samsung remote and it worked ok. The device has to have the protocol saved in the firmware to decoded and I think it should have only the most used. Speculating here... thanks for watching! 👍
on the oscilloscope juste long trames are recognized. rc5 ans rc7 protocols are not recognized.
finding littérature about protocoles is very difficult except for rc5
It is a great and multifunctional device but there is no ESR measurement for capacitors
Hi Ahmad, you're right! Only noticed that after naking the video, my bad! But pros and cons considered, personally I would spend the money on this. It is able to measure the components on the board, while my TC1 is not, so all things considered, still nice in my opinion. Thanks for watching! 👍
@@TechCornerTV Thank you
good review thanks.
Hi, Gald it has helpful 😁 Thanks for watching! 👍
It's too bad they didn't make much lower sweep speeds for the scope. Then it could double as a logger. It wouldn't be hard to do firmware wise.
Hi Kim, yeah, agree. Thanks for watching! 👍
I bought the owon handheld. If you save this money and and put in the owon by £120 you gets a awesome real machine dual channel 150mhz, 0.512Gsps ,signal generator and really good multimeter
Hi Andrés, I so gonna review that orcilloscope when I have the funds for it... I reached Owon but they didn't seemed interested, so, I have to wait to get the funds, but it is on my wishlist... 😁 but don't forget that £120 is almost 200€, 4 times the price of this device and isn't a multitester. Is a way better oscilloscope, no doubt about it. Thanks for watching! 👍
One day I will have one!
Hey Virgilio, sorry the late reply, out for vacations!!! It's a nice device, if you decide to get one, don't forget the affiliate links! Thanks for watching 👍
Gretting. I have a few questions. Is this the same as lcr tc2? Is there a diference between those and MESR-100? Can i also measure capacitors on board without detaching them like i can do with mesr 100?
Hi, no, you cannot measure capacitor on the board, well you can, but will not give the correct values. I'm might be wrong, but this unit is much more accessible also than the MESR-100 if I remember correctly. Thanks for watching.
Thanks , Very informative video
Hi! Glad it was helpful. Thanks for watching 👍
It didn't seem to agree with your component tester. Which one is badly wrong? Perhaps if you put a zener diode in the correct way round you might be able to demonstrate whether that feature actually works properly.
Hi Brian, thank you for your input on this, I'll have to see again what I did wrong to prevent making the same mistake in the future. Thanks for watching.
@@TechCornerTV the new one said 9pF the smaller white one said 3pF
Love your reviews ^_^ As a hobbyist, I love FNIRSI too - I have the TC2 and the 138 Pro but then I also upgraded to the DSO 1014D and for MY needs, it more than meets its potential, so regardless what some naysayers have been toting about it - FNIRSI is really doing a great job at a very affordable price :)
Hi, finally someone that it get's it! Not everyone will need a ultra accurate oscilloscope/tester for the use they do of the device. I try to present the device the best I can and leave the decision to the viewer! Thanks for watching and your supportive comment, really appreciated! 😁
There is an auto mode for proper scaling to fit the measurement in the screen ....
Hello, yes, there is. Is on the menu/auto button. Thanks for watching!
Hey there, nice review! Did you ever test the DS18B20 function? Just received my DSO-TC2 and it shows wrong temperatures. In my case 3.5°C indoors. The same DS18B20 connected to µC shows something about 21°C. So the Sensor is definitely working...
Hi, not yet! I have to try that, but the sensor I used seem to be working ok. Thanks for watching!
I bought this. When I tried to set the scope to match the probe in 10X the software skipped over the setting for matching the probe.
HI, I show in the video how to set the probe in 10x, did you manage to get it changed to 10x? Thanks for watching!
Hello, I watched the full video. Great Review and This product is awesome for the buck. I'm just curious , does the oscilloscope have XY mode ?
Hi Eddrie, no it doesn't. For that, it has to have 2 channels (the X and Y coordinates, one from each channel). Thanks for watching! 👍
I bought one of this but it did not include de p6100 probe. Bought the probe on ebay but did not include the adapter for the osccilloscope small entrance) Is not available in amazon and only one seller on ebay sells it with the adapter but he does not ship to USA.Can anyone tell me where I can buy the adapter?
Hi, go to Aliexpress and search for MCX to BNC adapter. Is pretty cheap, like $1 or so. Thanks for watching.
@@TechCornerTV thanks for you help. I enjoy your videos!
Can you take a video of testing igbt? Its listed on your feature list but i am not sure about it. Thanks.😊
Hi Yasin, currently I don't have any here in my components, but I will order and check it out. Thanks for watching!
Can I use DSO to directly input AC 230 to check the sine wave?
By the way I have the T3 model.
Hi, yes, but you meed to use the 10x probe and you should be really careful, one mistake and it's done 😁 the manual says you can go up to 400V. Thanks for watching.
@@TechCornerTV Lucky me and thank you for the info and advice. Unfortunately, my T3 did not come with the 10x Probe other than the normal 2 wires meant to connect to the DSO INPUT with 2 crocodile clips at the end.
hello author, you have the firmware for fnirsi dso-tc2..You can share it
Hi, sorry I no longer have it, but if you ask in the FNIRSI Whatsapp support group. they will send it to you. Thanks for watching.
200 kHz is very low. FNIRSI makes a 100 mhz oscilloscope already. (Really 40 or 50 mhz). They should of used that chip. The rest is great. Ill wait to see if they come out with a faster scope.
Hey Tron, don't forget that you're watching a 30€ oscilloscope + a 10€ multi-purpose tester, so you can't ask for much... but with the all package, some more juice on the oscilloscope will be the cherry on the top of the cake... but maybe next time, even so, only for the tester, I would buy it. Super fast, really happy with it! Thanks for watching! 👍
@@TechCornerTV max only 1mH?
wonderful FNIRIS DSO-TC2 test equipment 😎and please do not use Styrofoam is a trademarked brand of closed-cell extruded polystyrene foam not earth friendly. 🙄
Hi, it is a nice equipment, used mostly as component tester, but yes, very nice! Styrofoam yeah, pretty bad, but most of the electronics that are delivered from china have it... it will take some years to solve this! Thanks for watching 👍
So does this work on components on circuit boards, I havent seen any videos anywhere showing this yet.
Hi! Sorry for this late reply, but I kind of had mine momentary lost between all the packages I have here... If I had given a feedback before, your message will disapear from my YT dashboard of messages to reply, but today I found it and test it on my mV voltage reference board and while the TC1 was unable to correctly measure the resistor on the board, the TC2 was able to correctly indentify them and return the correct resisntance, so to answer your question, yes, you can test components directly on the board, well at leas resistor, only tested with resistors! Thanks for watching 👍
@@TechCornerTV
Thank you for looking into it for me mate, I apperciate your help, mine turned up yesterday and it seems amazing quality, im impressed!
Is there any support for downloading images / screenshots from the device and saving them elsewhere ? Or is the only option to take a photo of the display using your camera ?
Hi Patrick, You can connect the device to your PC and I'm 99% sure that it opens a folder in your PC where you can download the screenshots you made. Thanks for watching!
Where is the ESR for the Elco's?
Hi! Unfortunetaly no. Don't know why, but it doesn't have. Thanks for watching!
How do you set it to 10x for high voltage? I can't find this piece of into anywhere.
Hi, take a look in the video, minute 12:00... it's there 😃 Thanks for watching and wish you a Happy New Year!
Would this be sufficient for vintage amp repair (setting bias offset..)
Hi, I believe so, it analyses electrical signals, if the amp is within the voltage working parameters, you should be ok. Thanks for watching!
Parabéns pelo vídeo, fiquei triste porque não tem mais a indicação de ESR que havia na versão C1
Olá António, sim, tens razão. É realmente uma pena, é tipo morrer na praia, tens tudo melhor que o TC-1, mas depois falta-lhe essa função e mais, pelo que li no suporte da FNIRSI, não pode ser corrigido com upgrade de firmware, parece estranho, mas foi o que disseram. Obrigado por assistires! 👍
Could you test with a square signal if it looks good at 100kHz?
Hi, when I do my review of oscilloscopes bellow $60, I will test and show you! Thanks for watching 😁
Hi! Can you tell me the markings of the 2 microprocessors that are mounted on the board?
Hi Leon, I'll have to reopen this again and put it under the microscope. I'll try to do it this week! Thanks for watching! 👍
@@TechCornerTV Hi!
Thank you, they already suggested to me the marking MM32F103RET6 for the multitester and CH32F103C8T6 for the oscilloscope! These are Chinese analogues of STM32.
max voltage for AC and DC
Hello, 1x 40V and 10x 400V put you can see in the product page in aliexpress, you have there the specs, I believe. You have the link in the video description. Thanks for watching.
What does long press OK in scope mode? >> appeared in top left corner.
Hello Vlad, I think it is the fast moving option, will allow you to move the cursor in a fast way. But if you tell me the time in the video m:s I can confirm. Thanks for watching 👍
@@TechCornerTV yes it is, I just checked. I did not saw it in video, but find myself.
Hi Hugo, thank you for the video.
I'm an electrician, I work with 230v. I see the TC2 can measure in AC and I also saw the X10 feature. I'm joining the dots together here but I don't know, does the TC2 measure AC voltage too?
Why would I want that when I have a multimeter? Just curious, really.
I also want to test sliding neodymium magnets across coils of wire and reading the oscilloscope readings that way. I see the TC2 doesn't have a button or setting for MAX or MIN readings. Perhaps can it record the data to download to a computer as a data logger?
Hi Jacques, let me be honest, I don't work with that voltage in my projects and I'm self tought person with already some knowledge, but light years behing any engineer. That said, i *think* you'll be ok measuring AC if you use the 10X probe. The thing of measuring with the oscilloscope is not normally to measure the voltage, you can do that without a sweat with a multimeter as you mentioned. But with the oscilloscope you can analyse the signal, the sinewave, if you have ripples/noise and stuff like that.
The oscilloscope can give you also vpp (voltage peak to peak) that I don't know if the multimeter can give you that, probable some high end can... really don't know. The DSO-TC2 oscilloscope part is (as far I can tell) heavilly based on the DSO-138 (PRO) that is one of the more basic oscilloscopes that you can find, consider the oscilloscope a bonus, it works ok, but don't expect any other functionalities other than what you saw in the video. The DSO-PRO (5Mhz) also from FNIRSI as lot more functions that this one and for almost the same price, BUT, doesn't have the multi-tester.
Hope that my comment in some way helped, thank you so much for watching and for your input on this video! 👍
@@TechCornerTV Sweet, thanks for responding 👍🏻
@@razerh0 👍
@@TechCornerTV Do you work with data loggers?
My focus is on passing magnets over coils and thinking about making a fan for free energy. One can get 1kw drone motors, which you can imagine are tiny. I need the tools to analyze and experiment with 🤔
If you do sliding magnets and set the triggning and time scale right you should be able to catch a max min on the osc. Won't be many significant figures.
Just noticed that when trig is "AUTO" you can increase the time unit to 500s! And it does show a Vmax & Vmin.
But I fear you will lose more energy than you get "for free". But it can give experience! So measure away!
Hello! Do you know if it's possible to measure inductance with this equipment? its written in the description LCR measurement, so I assumed it's possible to measure inductance.
Hello Lucas, yes it is. Thanks for watching! 👍
Can i test car sensors with this?
Hi, if the bandwidth used is bellow 200Khz and the voltage is within limits, for sure. Thanks for watching! 👍
DSO TC3 mas completo
Hi Juan, you're right, but it is more recent also.I have a video on the TC3 also. Thanks for watching!
en donde se puede comprar este apatato y cuanto vale . yo vivo en colomba o pajina en internet para compra gracias
Hello Alexander, you have here the link to buy geni.us/rDqW , they sent to everywhere. Thanks for watching 👍
measure ESR?
It seems that it does not.
Hi Francesco! It seems it does not. Bummer! I was so pumped with this, I didn't notice that detail. Maybe can fixed with a firmware upgrade. Thanks for watching! 👍
Yup, I think you're right!
But sir how to buy
Hi, you have here the affiliate link geni.us/rDqW , thank you so much for your support! ❤
The deal killer is the 200KHz bandwidth ... I instantly think man a 1GSPS osciloscope with 2 channels start at say 300€ ...
Hey John, exactly, the idea in this device is to join to cheap/low cost devices in to one, I don' think they even thought in ramp it up a bit, with all the work on the shell and the overall quality, it deserver a bit mode speed on the oscilloscope, but I get it, they have to sell low to sell a lot. Thanks for watching! 👍
@@TechCornerTV I mean it's indeed very handy no doubt since one get's to have a component tester and a (very limited) dso ... I would not mind to have no doubt especially for the price. But the sampling rate on a digital oscilloscope is (almost) everything ... :)
Nice video btw, congrats.
Fazes bons videos parabéns!
No esr for polarized caps?
Hey Dan, no, it is really a pitty, but no. Thanks for watching 👍
Quanti MHz arriva
Hi Diego, not MHZ... it can go up to 200KHz. Thanks for watching! 👍
@@TechCornerTV
Quindi per fare misurazioni di cb radio non va bene
ho ones care unboxing
Hello, I will try to make a lot more shorter. Thanks for watching.
Compatible ba sa car repairs?
Hi! I only use it in my workbench but I think so, no problem! Thanks for watching 👍
sma connector
Hi, thanks for watching!
Ok
Hello! Thanks for watching 👍
TC3 is much better!
Hi, I think so also, I have already a video in the channel with TC3, two to three weeks ago. Thanks for watching!
it does not last long... waste of money
Hi Jeamel, what's up with yours? It stopped working? If so, go to the www.fnirsi.cn/support and use the QRCode to join the whatsapp channel and ask for support. They probably replace that unit or give you a solution. Thanks for watching and good luck! 👍
too long, too much unboxing 👎
Hi, I do appreciate you comment, even a negative one. Without it, I can't improve my next videos. Hope you have a happy new year. Thanks for watching.
Such a pity you do not see ohms when you test caps, and for me it is then a no go, you also have to see ohms,
because a lot of times the uF and Vloss is good, but the ESR/ohms is bad, and that means it's a bad cap, and you
cannot see that with this device, such a pity, i wanted to buy it, also because of the Oscilloscope, but i will stick
with my BSIDE ESR02PRO, that is a great accurate device.
Hi, it's on the way the DSO-TC3 that already has ESR and it will be reviewed here pretty soon! Stay tunned... thanks for watching!
@@TechCornerTV OK that would be great, i look it up, and i will wait for your review.
Do you know 100% it will have a ESR meter in it that does omes?
Ok
Hi! Thanks for watching 👍