Hello, thank you , I was wondering what size of a finish mower in should buy. I have a Solis 26 hp, do you think it will handle a 6feet finish mower to cut land thick grass ? The French man thank you in advance for your advice :)
That’s awesome, somebody with lots of grass to cut should consider that size tractor and finishing mower, it would wear out three or four big box store lawn mowers plus all the other uses of the loader and tractor , another cool video
Nice video Tony, the T264 is a very versatile tractor I have a 72 in. finish mower that I use it handles it just fine, also have a front blower and york rake for it, here in Maine the ground is just drying out.
Ouch! That was pretty much right in the center of the window. I noticed Tonya was filming you as the rear of the mower (the discharge) was in her direction. I hope she was shielding herself. Y'all stay safe!! 👍🚜 Nice work!! I can smell that fresh cut grass!
Which one of your T25/T264 Videos shows the best demonstration of the hydrostatic transmission? I would love to see a short video on how it goes on flat vs small hills etc. Thanks in advance for the great content.
The trailer is 7000. GVW. Because it is s gooseneck, I can transfer about 1200 pounds into the bed just forward of the axle. It rides so much better than a bumper pull. We use it a lot, so it was worth the investment.
Tony I need your help bad. My TYM dealer is the absolute worse in the business. First I was told the tractor would be delivered in 10 days. Then today they tell me maybe not even by the end of the week. They became more backed up because, they used some of their techs to work on a building in their yard. I contacted the owner. (Big dealer too, serves two states) He basically told me he would cancel my order if I wanted to go elsewhere and that once a deal begins bad it usually only gets worse. I can’t believe he emailed me back that! HOLY CRAP! I take it he doesn’t GAF about customers at all. Is there a near equivalent tractor and equivalent price as the TYM 264. I just don’t want to keep moving forward with this dealer.
My friend, I have no control over dealers. They own a franchise and are their own boss. Every brand tractor is like this. I would call and talk over the phone. It is hard to read feelings in an email.
Tony, what is the highest setting on finish mowers? The reason for the question is because I want to mow my pasture feild but I want to mow it at 5-6 inches high.
what kind of hydro top link lets you free float? I was looking at the setup and wondering why you weren't using a chain and then you say it can float. is that any hydro top link?
What happens when a flair mower hits a boulder? I have several in my 15 acre field and as hard as I try to avoid them almost every time I hit one or two and it doesn’t hurt my bush hog.
Hitting a boulder most definitely hurts a conventional rotary cutter. It takes big chunks out of the blade. It causes the blade to become off-balance. It cuts like crap after hitting and will ruin the gearbox bearing very fast if you keep mowing without replacing the blade. It is quicker and cheaper to replace only the damage cutters on the flail mower. I never recommend mowing rocks. 😁
@@WaldenSpawn Since the blades are independent and not hard mounted to the drum they deflect out of the way with minimal damage. Especially if they are Y blades because they are so light. Worst case scenario if you are using heavy hammer blades and sat there letting them beat against a boulder you might wear the end enough to require replacement. But they are cheaper and easier to replace than a brush hog blade.
So my dad is about to buy 5 acres and a house. Would you do the finish mower over a zero turn. I was gonna let him use my 22 pto hp Mitsubishi tractor.
If mowing is all that will be done, a zero turn will mow much faster. If you want to till the garden, move some dirt, clear some brush, etc. after you mow, then a tractor all the way.
Don't know if you've already made the purchase or not, but I'll throw my $0.02 in anyway if it may help someone else. I purchased a farm that had about 4 acres I have to mow, 12 when I do my pasture. Initially I bought a 60" zero turn, and loved it.. aside from all the times I got it stuck, which was often, since my property is somewhat hilly, and I have a pond with sloped banks (ZTs are absolutely worthless on grass that is remotely damp, and on a hill). It still did the job, but I was cussing it at some point every time. Recently I purchased an older Ferguson 35 and picked up a 72" finish mower.. I absolutely love it. It may not be faster, though it could be if I were comfortable in a higher gear, but it's.. easier. Zero turn you're constantly pushing/pulling the sticks.. tractor is set and forget, turn the wheel every now and then. It's more cumbersome getting into tight places, but can do most of them, I'm more confident with it around the edge of my pond, and it's great in the flat areas as I can just sit back and let it go. I still use both, as the zero turn is great for zipping around the fences and trees, but the tractor cuts the majority (wife can also run the ZT if she wants while I'm on the big guy).
Nice work, Tony. I'm pulling a 6 ft finish mower with my T264. The lil' beast handles it like a dream. Such a time saver!
Nice. I have really enjoyed my T264.
Hello, thank you , I was wondering what size of a finish mower in should buy. I have a Solis 26 hp, do you think it will handle a 6feet finish mower to cut land thick grass ?
The French man thank you in advance for your advice :)
"Fittin' t' show ya!" That's just funny stuff right there, Tony! Thanks again for just doing what y'all do. Keep 'er comin' on!
Thank you. Working with the tractors today
great tip on using the grapple as your finder!
Thank you.
That’s awesome, somebody with lots of grass to cut should consider that size tractor and finishing mower, it would wear out three or four big box store lawn mowers plus all the other uses of the loader and tractor , another cool video
I agree. Both the tractor and the mower are lifetime purchases. If they are maintained, they will last a lifetime.
Very nice job! Just got a finish mower the exact same one as you have! I loved working with it today! Very nice job Mr Tony, thank you
I look forward to your videos with the mower
@@TonysTractorAdventure yessir! I actually used it today for the first time and cut down a field! I filmed it😊😉!
I'm learning alot by watching you thanks for sharing 👍
Thank you so much.
Nice video Tony, the T264 is a very versatile tractor I have a 72 in. finish mower that I use it handles it just fine, also have a front blower and york rake for it, here in Maine the ground is just drying out.
We worked hard today. Almost got the sawmill pad ready for gravel.
Great work, so sorry about your window. 😞 God bless.
It happens. It was a great day still, and could have been a lot worse.
nice job Tony ,
Thank you
Ouch! That was pretty much right in the center of the window. I noticed Tonya was filming you as the rear of the mower (the discharge) was in her direction. I hope she was shielding herself. Y'all stay safe!! 👍🚜 Nice work!! I can smell that fresh cut grass!
She uses a long lens and stays a long way away. This still worries me..
Show us brother, show us! Lol! Awesome video!
Thank you.
Great upload my friend !!!!
Thank you
Great video buddy hope you’re doing good god bless
God Bless you too! Doing great
A $500 pretty cool, I loved that one
Yep. My wife always sees the beauty in stuff. It is her gift.
Actually, it looks really good.
Which one of your T25/T264 Videos shows the best demonstration of the hydrostatic transmission? I would love to see a short video on how it goes on flat vs small hills etc. Thanks in advance for the great content.
If you close your eyes, you would not know if you were on a t25 or a t264 in how the transmission works. They are the same transmissions.
Dang that sucks about the window at least the tint helped keep most of it in place to clean up easily
It was not to bad. Still a good day.
Why brand and model of finish mower are you using? Would you buy another one?
It is a Phoenix finish mower made in Italy. It has been rock solid.
what size grapple were you using at the start of the video?
It was 60”. Check out our newer videos. We have the perfect grapple now. Dual clamps and only 260 pounds.
Just like child's play tony
It is
Does the mower have mulching blades on it?
Yes, heavy duty
i just noticed a goose on your 1/2 ton. what size is your trailer and weight? how do you find it with a 1/2 ton goose vs bumper?
The trailer is 7000. GVW. Because it is s gooseneck, I can transfer about 1200 pounds into the bed just forward of the axle. It rides so much better than a bumper pull. We use it a lot, so it was worth the investment.
I've done that to windows before, not fun paying for them if you don't have insurance lol
I have good insurance, but it is cheaper sometimes, long term, to just pay for it.
@@TonysTractorAdventure I know what you mean!
A lot better cut than a brush hog or a riding mower.
I agree. I am impressed.
Tony I need your help bad.
My TYM dealer is the absolute worse in the business.
First I was told the tractor would be delivered in 10 days. Then today they tell me maybe not even by the end of the week. They became more backed up because, they used some of their techs to work on a building in their yard.
I contacted the owner. (Big dealer too, serves two states)
He basically told me he would cancel my order if I wanted to go elsewhere and that once a deal begins bad it usually only gets worse.
I can’t believe he emailed me back that! HOLY CRAP!
I take it he doesn’t GAF about customers at all.
Is there a near equivalent tractor and equivalent price as the TYM 264.
I just don’t want to keep moving forward with this dealer.
My friend, I have no control over dealers. They own a franchise and are their own boss. Every brand tractor is like this. I would call and talk over the phone. It is hard to read feelings in an email.
Tony, what is the highest setting on finish mowers? The reason for the question is because I want to mow my pasture feild but I want to mow it at 5-6 inches high.
I would guess about 5 inches. I set mine when I got it and never looked back.
End of the video made me sad. Though, happy your wife didn’t get hit with the rock. God was looking out for her 😉
Yep. God Bless
Sorry about the window, right pain. Mower job v good!
It does mow well.i am very pleased with the tractor
It could have been worse
what kind of hydro top link lets you free float? I was looking at the setup and wondering why you weren't using a chain and then you say it can float. is that any hydro top link?
I have never seen any 40 hp tractor or lower with float on the rear remotes.
Yet another example of why flail mowers are the way to go. They throw debris DOWN instead of OUT like a bullet like a rotary/finish cutter/mower
I agree. We no longer have this mower.
What happens when a flair mower hits a boulder? I have several in my 15 acre field and as hard as I try to avoid them almost every time I hit one or two and it doesn’t hurt my bush hog.
Hitting a boulder most definitely hurts a conventional rotary cutter. It takes big chunks out of the blade. It causes the blade to become off-balance. It cuts like crap after hitting and will ruin the gearbox bearing very fast if you keep mowing without replacing the blade. It is quicker and cheaper to replace only the damage cutters on the flail mower. I never recommend mowing rocks. 😁
@@WaldenSpawn Since the blades are independent and not hard mounted to the drum they deflect out of the way with minimal damage. Especially if they are Y blades because they are so light. Worst case scenario if you are using heavy hammer blades and sat there letting them beat against a boulder you might wear the end enough to require replacement. But they are cheaper and easier to replace than a brush hog blade.
@@Noah_E ok cool that makes sense to me now, sounds like it would work for me then
So my dad is about to buy 5 acres and a house. Would you do the finish mower over a zero turn. I was gonna let him use my 22 pto hp Mitsubishi tractor.
If mowing is all that will be done, a zero turn will mow much faster. If you want to till the garden, move some dirt, clear some brush, etc. after you mow, then a tractor all the way.
Don't know if you've already made the purchase or not, but I'll throw my $0.02 in anyway if it may help someone else. I purchased a farm that had about 4 acres I have to mow, 12 when I do my pasture. Initially I bought a 60" zero turn, and loved it.. aside from all the times I got it stuck, which was often, since my property is somewhat hilly, and I have a pond with sloped banks (ZTs are absolutely worthless on grass that is remotely damp, and on a hill). It still did the job, but I was cussing it at some point every time. Recently I purchased an older Ferguson 35 and picked up a 72" finish mower.. I absolutely love it. It may not be faster, though it could be if I were comfortable in a higher gear, but it's.. easier. Zero turn you're constantly pushing/pulling the sticks.. tractor is set and forget, turn the wheel every now and then. It's more cumbersome getting into tight places, but can do most of them, I'm more confident with it around the edge of my pond, and it's great in the flat areas as I can just sit back and let it go. I still use both, as the zero turn is great for zipping around the fences and trees, but the tractor cuts the majority (wife can also run the ZT if she wants while I'm on the big guy).
Boa tarde máquina muito top amigo
Obrigada. Gostamos muito do nosso trator e dos implementos do trator. Isso torna o dia divertido.
Ouch 😢
your talking gratpull not finish mower?
There is a finished mower on the tractor. Not sure what you're talking about.
Need to be a John deere
Why?
lucky that small rocks did'nt hit cameraman.
Not lucky. Long lens professional camera.
1st
Not sure what that means
@@TonysTractorAdventure 1st to comment
😁